Search

In this paper, a decentralized consensus algorithm for a robotic swarm is presented, which enable agents to escape collisions and avoid obstacles collectively. To achieve consensus, we have used neighboring clusters and extreme function for data dissemination and consensus in agents to avoid obstacles respectively. The main challenge is to make fast and accurate collective decision by improving data propagation in presence of Byzantine agents. To improve data dissemination in local interactions of agents in decentralized fashion, an iterative rumor-based data propagation model is proposed. Due to presence of Byzantine robots, the LCP and the W-MSR algorithm cannot achieve consensus for obstacle avoidance in artificial swarms. We establish the Expectation-based Extreme Value (EEV) algorithm using the local expectation and the extreme function to solve these problems. The experiments conducted in simulations demonstrate that the rumor spreading method has better results than the Peer-to-Peer method in randomly connected swarm signaling network (SSN) with complex environmental circumstance, the EEV algorithm is more effective than the LCP and the W-MSR for the swarm navigation and consensus in agent on large obstacles / environmental features. Furthermore, in presence of malicious / hacked agents in a swarm it is very difficult to reach consensus. The result show that proposed algorithm can handle the Byzantine agents effectively.

The preparation of novel structures of light-diffusing particles is currently a research focus in the field of light-diffusing materials. This study, conducted by the common melt-blending process, controlled thermodynamic and kinetic factors to distribute smaller-sized organic silica bead (OSB) particles at the interface between a polycarbonate (PC) matrix and spherical island-phase styrene–acrylonitrile copolymer (SAN) for the in situ formation of compound eye-like microspheres with SAN as "large eyes" and OSBs as "small eyes". Through the multiple-scattering effects of these compound eye-like microspheres, these light-diffusing materials significantly improved the haze, scattering range, and light-shielding capabilities while maintaining high transmittance. Specifically, the PC/SAN-OSB light-scattering materials achieved a haze of 100% with an OSB content of only 0.17%, maintaining a transmittance of 88%. Compared with the PC/OSB system with the same level of haze, the addition of OSB was reduced by 88%. Therefore, this study achieved exceptionally effective light-diffusing materials through a simple, environmentally friendly, and low-cost preparation method, suitable for the scalable production of light-diffusing materials in new display and lighting fields. [ABSTRACT FROM AUTHOR]

The reservoir of the M oilfield in Tarim Basin is an unconventional fracture-cave carbonate rock, encompassing various reservoir types like fractured, fracture-cave, and cave, exhibiting significant spatial heterogeneity. Despite the limited pore space in fractures, they can serve as seepage pathways, complicating the connectivity between reservoirs. High-precision fracture prediction is critical for the effective development of these reservoirs. The conventional post-stack seismic attribute-based approach, however, is limited in its ability to detect small-scale fractures. To address this limitation, a novel pre-stack fracture prediction method based on azimuthal Young's modulus ellipse fitting is introduced. Offset Vector Tile (OVT) gather is utilized, providing comprehensive information on azimuth and offset. Through analyzing azimuthal anisotropies, such as travel time, amplitude, and elastic parameters, smaller-scale fractures can be detected. First, the original OVT gather data are preprocessed to enhance the signal-to-noise ratio. Subsequently, these data are partially stacked based on different azimuths and offsets. On this basis, pre-stack inversion is carried out for each azimuth to obtain the Young's modulus in each direction, and, finally, the ellipse fitting algorithm is used to obtain the orientation of the long axis of the ellipse and the ellipticity, indicating the fracture orientation and density, respectively. The fracture prediction results are consistent with the geological structural features and fault development patterns of the block, demonstrating good agreement with the imaging logging interpretations. Furthermore, the results align with the production dynamics observed in the production wells within the block. This alignment confirms the high accuracy of the method and underscores its significance in providing a robust foundation for reservoir connectivity studies and well deployment decisions in this region. [ABSTRACT FROM AUTHOR]

It is currently a challenge to accurately predict the deformation and fracture behavior of metal parts in automobile crashes. Many studies have shown that the deformation and fracture behavior of materials are significantly affected by the stress state during automobile crashes with complex stress state characteristics. In order to further promote the application of die-cast magnesium alloys in automobiles, it is particularly important to study the material deformation and fracture behavior of die-cast magnesium alloys. In this paper, the mechanical properties of the AM60B die-cast magnesium alloy sheet under four stress states (shear, tension, R10 notch tension, and cupping) were designed and tested. Based on the von Mises isotropic constitutive model and Swift weighted Hockett–Sherby hardening model, the plastic constitutive model of die-cast magnesium alloy was established. Based on the plastic model and the fracture model (JC, MMC, and DIEM) considering the influence of three stress states, the deformation and fracture behavior of the AM60B die-cast magnesium alloy front-end members in three-point bending were predicted by experiments and finite element simulation. The experimental results show that the deformation mode and loading–displacement curve trend of the AM60B die-cast magnesium alloy front members are the same, the crack initiation point and crack initiation time are the same, and the crack shape is similar. The results show that the complex stress state constitutive model parameters and the DIEM fracture model obtained in this paper can accurately predict the deformation and fracture failure behavior of the AM60B die-cast magnesium alloy sheet. [ABSTRACT FROM AUTHOR]