Search

Fruit weight is an important agronomic trait in pepper production and is closely related to yield. At present, many quantitative trait loci (QTL) related to fruit weight have been found in pepper; however, the genes affecting fruit weight remain unknown. We analyzed the fruit weight-related quantitative traits in an intraspecific Capsicum annuum cross between the cultivated species blocky-type pepper, cv. Qiemen, and the bird pepper accession, "129−1" (Capsicum annuum var. glatriusculum), which was the wild progenitor of C. annuum. Using the QTL-seq combined with the linkage-based QTL mapping approach, QTL detection was performed; and two major effects of QTL related to fruit weight, qFW2.1 and qFW3.1, were identified on chromosomes 2 and 3. The qFW2.1 maximum explained 12.28% of the phenotypic variance observed in two F2 generations, with the maximum LOD value of 11.02, respectively; meanwhile, the qFW3.1 maximum explained 15.50% of the observed phenotypic variance in the two F2 generations, with the maximum LOD value of 11.36, respectively. qFW2.1 was narrowed down to the 1.22 Mb region using homozygous recombinant screening from BC2S2 and BC2S3 populations, while qFW3.1 was narrowed down to the 4.61Mb region. According to the transcriptome results, a total of 47 and 86 differentially expressed genes (DEGs) in the candidate regions of qFW2.1 and qFW3.1 were identified. Further, 19 genes were selected for a qRT-PCR analysis based on sequence difference combined with the gene annotation. Finally, Capana02g002938 and Capana02g003021 are the most likely candidate genes for qFW2.1, and Capana03g000903 may be a candidate gene for qFW3.1. Taken together, our results identified and fine-mapped two major QTL for fruit weight in pepper that will facilitate marker-assistant breeding for the manipulation of yield in pepper. [ABSTRACT FROM AUTHOR]

TiO2-Al2O3 supports with different incorporation methods of titania were synthesized via three methods: impregnation (TA-I), co-precipitation (TA-CP), and co-precipitation–hydrothermal treatment (TA-HT). And the NiMoP catalysts prepared on the corresponding supports were evaluated for hydrodesulfurization (HDS) reactions. The results demonstrated that the Ti atoms in TA-I are attached to alumina through hydroxyl groups, while the Ti atoms in TA-CP and TA-HT can be dispersed in the alumina skeleton. Variations in the incorporation modes of TiO2 affect the support properties, consequently influencing the nature of the active metal on the supports. The Ti atoms dispersed in the Al2O3 skeleton allow an increase in the basic hydroxyl groups. Meanwhile, TiO2 in TA-CP and TA-HT can absorb hydrogen molecules and be partially reduced. Furthermore, metal species supported on the TA-CP and TA-HT are more easily reduced and better dispersed. For the NiMoP catalysts prepared with TA-CP and TA-HT, the Ti element promotes the sulfidation degree of Mo, besides shortening the average (Ni)MoS2 slab. The catalysts prepared with TA-CP exhibited superior activity for 4,6-DMDBT hydrodesulfurization. This can be ascribed not only to the relatively high sulfidation degree of Mo and proportion of the NiMoS active phase but also to the well-dispersed (Ni)MoS2 slabs. Moreover, the Ti4+ ions dispersed in the Al2O3 skeleton can be partially reduced to act as electron donors, enhancing the metallic character of the S layers in MoS2, which facilitates the improvement of the hydrogenation desulfurization activity. [ABSTRACT FROM AUTHOR]

In this present work, a new kind of sulfurized hydrodesulfurization catalyst was synthesized via the hydrothermal treatment of MoS2, NiCO3·2Ni(OH)2·4H2O, and Al2O3 precursors, followed by annealing under a H2 atmosphere, which does not require a sulfurization process compared to traditional preparation methods. The influence of the annealing temperature and the type of Al2O3 precursor on the interactions between MoS2 and Al2O3 were studied using X-ray fluorescence spectroscopy, X-ray diffraction, N2 adsorption–desorption, Raman spectroscopy, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. The results indicated an increase in the number of stacked layers of the MoS2 catalyst, accompanied by a decrease in the degree of decoration of Ni atoms onto MoS2 nanoslabs, as a result of the strengthened MoS2–Al2O3 interaction. Subsequently, the efficiency of hydrodesulfurization (HDS) was evaluated using dibenzothiophene as a representative reactant, while establishing a correlation between the structure of the catalyst and its performance. The catalysts, using pseudo-boehmite as the precursor and calcined at 500 °C, synthesized by calcining pseudo-boehmite as the precursor for Al2O3 at a temperature of 500 °C and possessing suitable metal–support interactions, exhibited a reduced number of MoS2 stacking layers and lateral dimensions, along with an optimal decoration degree of Ni atoms, thereby resulting in the highest level of HDS activity. [ABSTRACT FROM AUTHOR]

Generally, in terms of electrocatalytic CO2 reduction, single‐atom catalysts show high selectivities yet low current densities whereas conventional nanoparticle catalysts exhibit relatively high current densities but low selectivities. This work combines the advantages of the two classes of catalysts by constructing a Ni‐Gd‐N‐doped carbon black electrocatalyst within which NiI active sites are exposed outside the carbon layers and Ni nanoparticles are encapsulated inside the carbon layers. The Gd atoms can not only influence the local electron densities of Ni 3d orbitals, thus strengthening the electronic activity, but also tailor the sizes of the Ni nanoparticles, thereby minimizing the activity toward hydrogen evolution. Accordingly, this electrocatalyst yields both a high CO faradaic efficiency (97 %) and a large current density (308 mA cm−2), alongside an outstanding stability (100 h). [ABSTRACT FROM AUTHOR]

Major depressive disorder is a severe neuropsychiatric disease that negatively impacts the quality of life of a large portion of the population. However, the molecular mechanisms underlying depression are still unclear. The pathogenesis of depression involves several brain regions. However, most previous studies have focused only on one specific brain region. Plasma and brain tissues exchange numerous components through the blood-brain barrier. Therefore, in the present study, plasma samples from control (CON) mice and mice subjected to chronic unpredictable mild stress (CUMS) were used to investigate the molecular pathogenesis of depression, and the association between the peripheral circulation and the central nervous system. A total of 47 significant differentially expressed proteins were identified between the CUMS and CON group by an isobaric tag for relative and absolute quantitation (iTRAQ) coupled with tandem mass spectrometry approach. These 47 differentially expressed proteins were analyzed with ingenuity pathway analysis (IPA) software. This revealed that the acute phase response, LXR/RXR and FXR/RXR activation, the complement system and the intrinsic prothrombin activation pathway were significantly changed. Four of the significant differentially expressed proteins (lipopolysaccharide binding protein, fibrinogen β chain, α-1 antitrypsin, and complement factor H) were validated by western blotting. the present findings provide a novel insight into the molecular pathogenesis of depression. [ABSTRACT FROM AUTHOR]

Copyright of Angewandte Chemie is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

A Ni‐Gd‐N ternary doped porous carbon black catalyst was developed for electrocatalytic CO2 reduction, as reported by Lang Xu and co‐workers in their Research Article (e202201166). NiI active sites with high product selectivity and Ni nanoparticles with high conductivity are integrated within one catalyst. The Gd atoms not only tailor the sizes of the Ni nanoparticles but also change the local densities of the Ni 3d orbitals, thus enabling the catalyst to achieve high faradaic efficiency, large current density, and excellent stability. [ABSTRACT FROM AUTHOR]

Hydrodesulfurization (HDS) is an important process for the production of clean fuel oil, and the development of a new environmentally friendly, low-cost sulfided catalyst is key research in hydrogenation technology. Herein, commercial bulk MoS 2 and NiCO 3 ·2NiOH 2 ·4H 2 O were first hydrothermally treated and then calcined in a H 2 or N 2 atmosphere to obtain Ni-MoS 2 HDS catalysts with different structures. Mechanisms of hydrothermal treatment and calcination on Ni-MoS 2 catalyst structures were investigated by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), electron paramagnetic resonance (EPR), and X-ray photoelectron spectroscopy (XPS). The catalytic performance of Ni-MoS 2 catalysts was evaluated by the HDS reaction of dibenzothiophene (DBT) on a fixed bed reactor, and the structure-activity relationship between the structures of the Ni-MoS 2 catalyst and the HDS of DBT was discussed. The results showed that the lateral size, the number of stacked layers, and the S/Mo atomic ratio of MoS 2 in the catalyst decreased and then increased with the increase of the hydrothermal treatment temperature, reaching the minimum at the hydrothermal treatment temperature of 150 °C, i.e., the lateral size of MoS 2 in the catalyst was 20-36 nm, the number of stacked layers of MoS 2 was 5.4, and the S/Mo ratio in the catalyst was 1.80. In addition, the effects of different calcination temperatures and calcination atmospheres on the catalyst structures were investigated at the optimum hydrothermal treatment temperature. The Ni-Mo-S and Ni x S y ratios of the catalysts increased and then decreased with the increasing calcination temperature under a H 2 atmosphere, reaching a maximum at a calcination temperature of 400 °C. Therefore, DBT exhibited the best HDS activity over the H-NiMo-150-400 catalyst, and the desulfurization rate of DBT reached 94.7% at a reaction temperature of 320 °C., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Generally, in terms of electrocatalytic CO 2 reduction, single-atom catalysts show high selectivities yet low current densities whereas conventional nanoparticle catalysts exhibit relatively high current densities but low selectivities. This work combines the advantages of the two classes of catalysts by constructing a Ni-Gd-N-doped carbon black electrocatalyst within which Ni I active sites are exposed outside the carbon layers and Ni nanoparticles are encapsulated inside the carbon layers. The Gd atoms can not only influence the local electron densities of Ni 3d orbitals, thus strengthening the electronic activity, but also tailor the sizes of the Ni nanoparticles, thereby minimizing the activity toward hydrogen evolution. Accordingly, this electrocatalyst yields both a high CO faradaic efficiency (97 %) and a large current density (308 mA cm -2 ), alongside an outstanding stability (100 h)., (© 2022 Wiley-VCH GmbH.)