Search

Human infertility has become a global medical and social health problem. Mice deficient in type 3 adenylyl cyclase (AC3), a key enzyme that synthesizes cyclic adenosine monophosphate (cAMP), develop male infertility, although the underlying molecular mechanisms remain unknown. We performed a label-free quantitative (LFQ) proteomics analyses to identify testicular differentially expressed proteins (DEPs) and their respective biological processes. Furthermore, histological examination demonstrated that AC3 deficiency in mice led to mild impairment of spermatogenesis, including the thinning of seminiferous epithelium and local lesions in the testis. We further identified that the integrity of the blood-testis barrier (BTB) was impaired in AC3 knockout (AC3

An elastic masterbatch and elastic melt blown nonwovens are prepared based successively on styrene-ethylene/butylene-styrene (SEBS) and polypropylene (PP) blend. The phase separation morphology, rheological properties and crystal structure of the elastic masterbatch are investigated. The results show that a compatible and stable structure is obtained in molten SEBS and PP blend with excellent mobility in the temperature range of 210–230C. The crystallization of PP slows down resulting in a finer structure due to the restriction of the SEBS network structure with rarely change of crystalline structure. The relationship between process parameters and properties of the elastic nonwoven is also studied in detail. Air pressure and die to collector distance (DCD) have discernible effects on fiber diameter and bonding between fibers, further influencing the performances of nonwovens including porosity, tensile strength and elastic recovery. Elastic recovery is shown to be significantly more affected by DCD than by air pressure.

Most critically ill patients experience malnutrition, resulting in a poor prognosis. This study aimed to evaluate the association of prealbumin (PAB) with the prognosis for severely and critically ill coronavirus disease 2019 (COVID-19) patients and explore factors related to this association. Patients with laboratory-confirmed COVID-19 from West Campus of Union Hospital in Wuhan from January 29, 2020 to March 31, 2020 were enrolled in this study. Patients were classified into the PAB1 (150–400 mg/L; N = 183) and PAB2 (< 150 mg/L; N = 225) groups. Data collection was performed using the hospital’s electronic medical records system. The predictive value of PAB was evaluated by measuring the area under the receiver-operating characteristic (AUROC) curve. Patients were defined as severely or critically ill based on the Guidance for COVID-19 (7th edition) by the National Health Commission of China. During this analysis, 316 patients had severe cases and 65 had critical cases. A reduced PAB level was associated with a higher risk of mortality and a longer hospital stay. The AUROC curve for the prognosis based on the PAB level was 0.93, with sensitivity of 97.2% and specificity of 77.6%. For severe cases, a lower level of PAB was associated with a higher risk of malnutrition, higher NK cell counts, and lower B lymphocyte counts; these factors were not significant in critical cases. C-reactive protein and nutritional status mediated the association between PAB and prognosis. This retrospective analysis suggests that the PAB level on admission is an indicator of the prognosis for COVID-19.

Background miR-363-3p, the retinoid signaling pathway (RSP), and its associated membrane receptor, stimulated by retinoic acid 6 (STRA6), participate in lung development. We hypothesize that miR-363-3p is involved in lung cell proliferation and apoptosis by regulating the expression of STRA6, and this study was designed to investigate the effect of changes in the expressions of miR-363-3p and the STRA6 gene on the proliferation and apoptosis of rat alveolar type II cells. Methods To confirm our hypothesis, we used: a dual-luciferase reporter assay; cell culture and transfection; real-time quantitative polymerase chain reaction (PCR); Western blotting; a cell proliferation assay and flow cytometry analysis of the cell cycle, cell apoptosis, oxidative stress level, and mitochondrial membrane potential. Results Our results showed that STRA6 is a target gene for miR-363-3p, and when the expression of miR-363-3p increased, the relative messenger RNA (mRNA) expression of STRA6 decreased, which caused a decrease in STRA6 protein synthesis and subsequent inhibition of rat lung alveolar type II cell proliferation. In contrast, inhibiting the expression of miR-363-3p promoted the proliferation of these cells. This study also found that an increased expression of miR-363-3p induced rat lung alveolar type II cell apoptosis led to an increase in the oxidative stress level, decreased mitochondrial membrane potential, and an inducement of G1-phase cell cycle arrest. Conclusions In conclusion, miR-363-3p is associated with lung cell proliferation and apoptosis, while miR-363-3p inhibits rat lung alveolar type II cell proliferation by downregulating the expression of STRA6 and induces cell apoptosis by increasing cellular oxidative stress and G1-phase cell cycle arrest.

As wearable electronic devices have become commonplace in daily life, great advances in wearable strain sensors occurred in various fields including healthcare, robotics, virtual reality and other sectors. In this work, a highly stretchable and sensitive strain sensor based on electrospun styrene-ethylene-butene-styrene copolymer (SEBS) yarn modified by dopamine (DA) and coated with multi-walled carbon nanotubes (MWCNTs) was reported. Due to the process of twisting, a strain senor stretched to a strain of 1095.8% while exhibiting a tensile strength was 20.03 MPa. The strain sensor obtained a gauge factor (GF of 1.13 × 105) at a maximum strain of 215%. Concurrently, it also possessed good stability, repeatability and durability under different strain ranges, stretching speeds and 15,000 stretching-releasing cycles. Additionally, the strain sensor exhibited robust washing fastness under an ultrasonic time of 120 min at 240 W and 50 Hz. Furthermore, it had a superior sensing performance in monitoring joint motions of the human body. The high sensitivity and motion sensing performance presented here demonstrate that PDA@SEBS/MWNCTs yarn has great potential to be used as components of wearable devices.

High-performance electromagnetic interference (EMI) shielding material that that can function properly under extreme working conditions is critical for their practical applications. Herein, flexible and highly conductive meta-aramid (PMIA) nonwoven fabrics were fabricated by combining polydopamine (PDA) modification and electroless silver plating. The PDA modification greatly enhanced the efficient deposition of silver nanoparticles (AgNPs) and the interfacial cohesion between the AgNPs and the PMIA fibers. The silver-coated PMIA nonwoven fabric exhibited an electrical conductivity as high as 0.29 Ω/sq, an excellent EMI shielding effectiveness (SE) of 92.6 dB and a high absolute EMI SE of 8194.7 dB cm2 g−1. In addition, the silver-coated PMIA nonwoven fabric maintained high electrical conductivity and EMI SE after being subjected to washing, bending and torsion deformations, high/low temperature, strong acidic/alkaline solutions and different organic solvents. These results have clearly demonstrated that PMIA nonwoven fabric can be made highly electrically conductive by using a simple and highly scalable method. It holds great promise for the applications in EMI shielding materials that can be used in various harsh conditions.

Electrical heaters with rapid response, robust mechanical properties, and reliable chemical stability are highly desirable to meet the requirements for the development of high-performance heating systems that can be used in extreme conditions. Herein, highly conductive silver nanoparticle (AgNPs)-functionalized aramid fiber paper (AFP)-based electrical heaters were fabricated through an efficient plasma treatment and electroless plating method. The AFP/AgNPs show outstanding electrical conductivity with electrical resistance as low as 0.047 Ω/sq and maintain high electrical conductivity after 20 washing cycles and 1000 bending cycles. The AFP/AgNP-based electrical heater could reach a temperature of about 210 °C at a low voltage of 1 V with a rapid response time of 20 s. The electrical heater also exhibited sufficient heating reliability, stability, and repeatability in the long term (up to 10,000 s) and for 180 repeated heating and cooling cycles. Moreover, the electrical heaters maintain satisfactory heating performances even after being treated with acid/alkali solutions and various organic solvents. The overall performance of AFP/AgNP-based electrical heaters has been demonstrated in the application of water heating and ice melting, indicating their great potential for high-performance heating systems that can be used in various harsh conditions.

BACKGROUND: The nutrition status of coronavirus disease 2019 patients is unknown. This study evaluates clinical and nutrition characteristics of severely and critically ill patients infected with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and investigates the relationship between nutrition risk and clinical outcomes. METHODS: A retrospective, observational study was conducted at West Campus of Union Hospital in Wuhan. Patients confirmed with SARS-CoV-2 infection by a nucleic acid-positive test and identified as severely or critically ill were enrolled in this study. Clinical data and outcomes information were collected and nutrition risk was assessed using Nutritional Risk Screening 2002 (NRS). RESULTS: In total, 413 patients were enrolled in this study, including 346 severely and 67 critically ill patients. Most patients, especially critically ill patients, had significant changes in nutrition-related parameters and inflammatory markers. As for nutrition risk, the critically ill patients had significantly higher proportion of high NRS scores (P < .001), which were correlated with inflammatory and nutrition-related markers. Among 342 patients with NRS score ≥3, only 84 (of 342, 25%) received nutrition support. Critically ill patients and those with higher NRS score had a higher risk of mortality and longer stay in hospital. In logistic regression models, 1-unit increase in NRS score was associated with the risk of mortality increasing by 1.23 times (adjusted odds ratio, 2.23; 95% CI, 1.10-4.51; P = .026). CONCLUSIONS: Most severely and critically ill patients infected with SARS-CoV-2 are at nutrition risk. The patients with higher nutrition risk have worse outcome and require nutrition therapy.

In this work, a new kind of composite nanofiber-based strain sensor with superior electromechanical properties was fabricated by using aligned thermal plastic polyurethane (TPU) nanofibers coated with multi-wall carbon nanotubes (CNTs). In order to improve the deposition efficiency and the fastness of CNTs coating on TPU nanofibers, bio-inspired dopamine (DA) was employed to modify the surface of the TPU nanofiber via a fast deposition method. (The composite nanofibers obtained were denoted as DATPU.) The electromechanical tests showed that DATPU/CNTs nanofiber membrane had a wide linear working range of 370% in the direction parallel to the nanofibers (P-DATPU/CNTs), a high gauge factor of 22.0 and a high linear coefficient of determination (r2) of 0.997. P-DATPU/CNTs nanofibers also exhibited excellent durability during stretching–releasing test for 5000 cycles. The P-DATPU/CNTs composite nanofibers demonstrated high sensing performance in detecting human motions of finger and elbow bendings.

Background Deficiency of olfaction is thought to be associated with depression, and type 3 adenylyl cyclase (AC3) genetic knockout and forebrain knockout mice show depression-like behaviours. AC3 is expressed in the main olfactory epithelium (MOE) and hippocampus, which plays an important role in olfactory signal transduction. However, it is unclear whether AC3 in the MOE also plays a role in the pathogenesis of depression. Thus, we aimed to study the relationship between AC3 in the MOE and the pathogenesis of depression. Methods We obtained anosmic mice by intranasal perfusion of zinc sulphate (ZnSO4) (ZnSO4 mice), and distinctively knocked down AC3 in the MOE (AC3KD/MOE mice) by CRISPR/cas9 technology. Behavioural tests related to depression and anxiety were employed to evaluate the depression- and anxiety-like behaviours of mice. The mRNA and protein expressions of tyrosine hydroxylase (TH), dopamine receptors (Drds), and N-Methyl D-aspartate receptor subunit 2B (GluN2B) in the hippocampus of mice were investigated by qPCR and western blotting to explore the mechanism of depression and anxiety caused by AC3 in the MOE, preliminarily. Results Compared with NaCl mice, ZnSO4 mice exhibited depression-like behaviours in tail suspension tests (TST), forced swimming tests, and social (FST) interaction tests (SIT), but showed no anxiety-like behaviours in anxiety-related behavioural tests. The mRNA and protein expressions of Drd3 and GluN2B in the hippocampus of ZnSO4 mice were significantly downregulated. Compared with the negative control mice (NC mice), AC3KD / MOE mice showed depression-like behaviours in TST, FST, and SIT tests, anxiety-like behaviours in light/dark transition test, elevated-plus maze test, and novelty-suppressed feeding test. The protein expressions of Drd3, TH, and GluN2B were significantly downregulated in the hippocampus. Limitations We did not further demonstrate that AC3 in the MOE causes depression through the dopaminergic nervous system with dopamine or dopamine receptor agonists. Conclusions Our data demonstrate that intranasal infusion of ZnSO4 can cause depression-like behaviours and has no effect on anxiety-like behaviours. Specific knockdown of AC3 in the MOE can cause depression-like and anxiety-like behaviours. The behavioural changes caused by intranasal ZnSO4 and specific knockdown of AC3 in the MOE can be related to the significant downregulation of dopaminergic system and GluN2B expressions in the hippocampus of mice.

Wearable flexible sensors have developed rapidly in recent years because of their improved capacity to detect human motion in wide-ranging situations. In order to meet the requirements of flexibility and low detection limits, a new pressure sensor was fabricated based on electrospun barium titanate/multi-wall carbon nanotubes (BTO@MWCNTs) core-shell nanofibers coated with styrene-ethylene-butene-styrene block copolymer (SEBS). The sensor material (BTO@MWCNTs/SEBS) had a SEBS to BTO/MWCNTs mass ratio of 20:1 and exhibited an excellent piezoelectricity over a wide range of workable pressures from 1 to 50 kPa, higher output current of 56.37 nA and a superior piezoresistivity over a broad working range of 20 to 110 kPa in compression. The sensor also exhibited good durability and repeatability under different pressures and under long-term cyclic loading. These properties make the composite ideal for applications requiring monitoring subtle pressure changes (exhalation, pulse rate) and finger movements. The pressure sensor developed based on BTO@MWCNTs core-shell nanofibers has demonstrated great potential to be assembled into intelligent wearable devices.

Diabetes-induced male dysfunction is considered as a worldwide challenge, and testicular damage mainly caused by oxidative stress is its most common manifestation. Cordycepin, a natural antioxidant, has been used in the treatment of diabetic complications. However, the protective action and underlying mechanism of cordycepin on hyperglycaemia-induced testicular damage are unclear. This study aimed to investigate the protective effects and molecular mechanisms of cordycepin against diabetes-induced testicular damage. The type 2 diabetes model was established in C57BL/6 male mice via high-fat diet for 4 weeks and injected intraperitoneally with 50 mg/kg/day streptozotocin for five consecutive days. Then mice were treated with cordycepin (10 and 20 mg/kg, respectively) for 8 weeks. At the end of experiment, biochemical indicators, microstructure of testicular tissue, sperm morphology, TUNEL staining and protein expressions were evaluated. In the present study, cordycepin alleviated the testicular damage, restored disruption of the blood-testis barrier, and improved spermatogenic function via the antiapoptotic and antioxidant capacity. Mechanistically, cordycepin significantly enhanced SIRT1 expression and triggered the activity of Foxo3a, further to induce the expression of its downstream antioxidant enzymes, including Mn-SOD and CAT. These findings indicated that cordycepin could improve hyperglycaemia-induced testicular damage by regulating downstream antioxidant enzymes activity through the SIRT1/Foxo3a signalling pathway.

Virgin adult male mice often display killing of alien newborns, defined as infanticide, and this behavior is dependent on olfactory signaling. Olfactory perception is achieved by the main olfactory system (MOS) or vomeronasal system (VNS). Although it has been established that the VNS is crucial for infanticide in male mice, the role of the MOS in infanticide remains unknown. Herein, by producing lesions via ZnSO

Neuronal primary cilia are crucial for body weight maintenance. Type III adenylyl cyclase (AC3) is abundantly enriched in neuronal cilia, and mice with global AC3 ablation are obese. However, whether AC3 regulates body weight through its ciliary expression and the mechanism underlying this potential regulation are not clear. In this study, humanized AC3 knock‐in mice that are resistant to high‐fat diet (HFD)‐induced obesity are generated, and increases in the number and length of cilia in the ventromedial hypothalamus (VMH) are shown. It is demonstrated that mice with specifically knocked down ciliary AC3 expression in the VMH show pronounced HFD‐induced obesity. In addition, in vitro and in vivo analyses of the VMH show that ciliary AC3 regulates autophagy by binding an autophagy‐related gene, gamma‐aminobutyric acid A receptor‐associated protein (GABARAP). Mice with GABARAP knockdown in the VMH exhibit exacerbated HFD‐induced obesity. Overall, the findings may reveal a potential mechanism by which ciliary AC3 expression regulates body weight in the mouse VMH., Type III adenylyl cyclase (AC3) is abundantly enriched in neuronal cilia. This paper reports that ciliary AC3 in the ventromedial hypothalamus (VMH) is essential to high‐fat diet (HFD)‐induced obesity. Cell lines and mouse models show that in the VMH, ciliary AC3 regulates autophagy by binding an autophagy‐related gene, gamma‐aminobutyric acid A receptor‐associated protein (GABARAP). Mice with GABARAP knockdown in the VMH exhibit exacerbated HFD‐induced obesity.

A rapid, inexpensive and efficient sample preparation method for simultaneous extraction and determination of three pyrethroids and seven phthalate esters in Radix et Rhizoma Glycyrrhizae samples was developed. The target analytes were extracted using a two-step extraction method including ultrasonic-assisted extraction and dispersive liquid-liquid microextraction coupled with gas chromatography-mass spectrometry (GC-MS). In ultrasonic-assisted extraction process, acetone was used as extraction solvent and extraction time was set as 3 min. In dispersive liquid-liquid microextraction process, optimized experimental conditions including 100 μL of CCl4 as extraction solvent and 1.0 mL of acetone as dispersant with 3% (m/V) of NaCl were adopted. The eluents were further quantitatively determined by GC-MS. All ten kinds of analytes were well separated, and the calibration curves showed good linearity, with correlation coefficients greater than 0.9992. Low detection limits of 0.0035 μg kg-1 for DMP to 1.0 μg kg-1 for IMIP were achieved. The method demonstrated good recoveries between the acceptable range of 79.7% for IMIP to 105.7% for TETR at three spiked levels with RSD

Purpose At present, the enzyme washing process is widely used in hemp garment in the industry. However, it has many disadvantages. First, it is inefficient and labor-intensive, which can only be produced in small quantities and will take much time for workers to check. Second, its cost is high. The strength loss of the garment is up to 20 percent, with a bad damage. Presently, the enzyme washing process of the gray fabric is not industrialized. The purpose of this paper is to obtain a stable and efficient process for the enzyme washing of the gray fabric. Design/methodology/approach The whiteness, weight loss rate, strength, dyeing property and fabric style of enzyme washed gray fabrics were studied. Findings The results showed that the enzyme treated fabric has soft handle, smooth surface, good elasticity and high levelness, as well as low strength reduction rate under the optimized condition of bath ratio of 1:12, cellulase dosage of 0.3 percent, pectinase dosage of 1 g/L, treatment temperature of 55°C, treatment time of 80 min and pH of 6. Originality/value First, the process is environment friendly, green and sustainable and, second, it will make the industrialization of the enzyme washing process of gray fabrics, with a high commercial value.

BACKGROUND: miR-363-3p, the retinoid signaling pathway (RSP), and its associated membrane receptor, stimulated by retinoic acid 6 (STRA6), participate in lung development. We hypothesize that miR-363-3p is involved in lung cell proliferation and apoptosis by regulating the expression of STRA6, and this study was designed to investigate the effect of changes in the expressions of miR-363-3p and the STRA6 gene on the proliferation and apoptosis of rat alveolar type II cells. METHODS: To confirm our hypothesis, we used: a dual-luciferase reporter assay; cell culture and transfection; real-time quantitative polymerase chain reaction (PCR); Western blotting; a cell proliferation assay and flow cytometry analysis of the cell cycle, cell apoptosis, oxidative stress level, and mitochondrial membrane potential. RESULTS: Our results showed that STRA6 is a target gene for miR-363-3p, and when the expression of miR-363-3p increased, the relative messenger RNA (mRNA) expression of STRA6 decreased, which caused a decrease in STRA6 protein synthesis and subsequent inhibition of rat lung alveolar type II cell proliferation. In contrast, inhibiting the expression of miR-363-3p promoted the proliferation of these cells. This study also found that an increased expression of miR-363-3p induced rat lung alveolar type II cell apoptosis led to an increase in the oxidative stress level, decreased mitochondrial membrane potential, and an inducement of G1-phase cell cycle arrest. CONCLUSIONS: In conclusion, miR-363-3p is associated with lung cell proliferation and apoptosis, while miR-363-3p inhibits rat lung alveolar type II cell proliferation by downregulating the expression of STRA6 and induces cell apoptosis by increasing cellular oxidative stress and G1-phase cell cycle arrest.

Background The type 3 adenylyl cyclase (AC3) enzyme is involved in the synthesis of cyclic adenosine monophosphate (cAMP). It is primarily expressed in the central nervous system (CNS) and plays a crucial role in neurogenesis and neural dendritic arborization. However, the AC3's functional role in the gastrointestinal tract remains ambiguous. Methods AC3 expression in enteric tissue of AC3+/+ mice was investigated using immunohistochemistry and RT-PCR. AC3 knock-out mice (AC3-/- ) were used to examine the effect of AC3 on the enteric nervous system (ENS) function and the number of cilia and apoptotic cells. Additionally, total gastrointestinal transit time and colonic motility were compared between the AC3-/- and AC3+/+ groups of mice. Key results AC3 was predominately expressed in the myenteric plexus of the large intestine. Colonic-bead expulsion analysis showed accelerated propulsion in the large intestine of the AC3-/- mice. The AC3-/- mice demonstrated reduced nerve fibers and enteric glial cells count in colonic mucosa compared to the AC3+/+ mice. Furthermore, AC3-/- mice exhibited increased cellular apoptosis and reduced ARL13B+ cilium cells in the colonic lamina propria compared to the AC3+/+ mice. Conclusions In AC3-/- mice, innervation of the lamina propria in the colonic mucosa was reduced and colonic propulsion was accelerated. AC3 is crucial for the development and function of the adult neural network of ENS. AC3 deficiency caused atrophy in the colonic mucosal neural network of mice.

Flexible strain sensors have attracted extensive attention due to their potential applications in wearable electronics and health monitoring. However, it is still a challenge to obtain flexible strain sensors with both high stretchability and wide linear strain sensing range. In this study, styrene-ethylene-butadiene-styrene copolymer/carbon nanotubes (SEBS/CNTs) composite fiber which showed both electrical conductivity and high stretchability was fabricated through a scalable wet spinning method. The effect of CNTs content on the strain sensing behavior of the SEBS/CNTs fiber based strain sensor was investigated. The results showed that when the CNTs content reached 7 wt%, the SEBS/CNTs composite fiber was capable of sensing strains as high as 500.20% and showed a wide linear strain sensing range of 0-500.2% with a gauge factor (GF) of 38.57. Combining high stretchability, high linearity and reliable stability, the SEBS/CNTs composite fiber based strain sensor had the ability to monitor the activities of different human body parts including hand, wrist, elbow, shoulder and knee.

Background: Ureteroscopy is widely applied in pregnant women with renal colic, but such patients are easy to experience uterine contraction after ureteroscopy, There are many factors which may result to uterine contraction, this study aims to explore the risk factors of uterine contraction triggered by ureteroscopy in pregnant women with renal colic. Methods: 101 pregnant women were retrospectively analyzed, all patients were hospitalized because of severe renal colic. All patients received ureteroscopy during which double J catheters were inserted into ureters for drainage. Patients received medical treatment individually according to their condition and the uterine contractions were detected by EHG within 12 hours after operation. Patients were classified as group A (uterine contraction, n=46) and group B (no uterine contraction, n=55) according to the presence or absence of continuously regular uterine contraction. Clinical characteristics were collected for further analysis, including history of deliveries, anesthesia methods, application of phloroglucinol or not, surgical time, Oxygen inhalation or not, pain relief or not after surgery, systemic inflammatory response syndrome(SIRS) occurred or not. A binary logistic regression analysis model was established to explore whether such clinical characteristics were relevant to uterine contraction after ureteroscopy. Results: The incidence of continuously regular uterine contraction occurred within 12 hours after ureteroscopy in pregnant women was 45.54%, and the presence of uterine contraction was related to the following factors(PConclusion: Continuously regular uterine contraction is easy to occur within 12 hours after ureteroscopy in pregnant women. SIRS occurred after surgery is a risk factor for uterine contraction; on the contrary, no history of childbirth, shorter surgical time, application of phloroglucinol, pain relief after surgery are protective factors.

Optical lenses driven by dielectric elastomer (DE) actuators with tunable focal lengths are presented here. They are inspired by the architecture of the crystalline lens and the ciliary muscle of the human eye and have prompted a growing interest. The most commonly used DEs in tunable lenses have often required highly transparent films and also the need to encapsulate clear liquid silicone to act as the lens. There is a restriction on the properties of the tunable lens imposed by materials limitations. Here, the fabrication of a fully 3D printed tunable lens with an inhomogeneous structure is described. It exhibited a 29% change in focal length from 33.6 mm to 26.1 mm under a dynamic driving voltage signal control. Furthermore, it displayed excellent stability when the focal length was tuned from far to near (30.1 mm to 25.3 mm) for 200 cycles. The tunable lens obtained mimics the working principle of the human eye in auto adjusting the focal length and has evident potential applications in imaging, information storage, beam steering and bifocal technology.

CRISPR-CasRx technology provides a new and powerful method for studying cellular RNA in human cancer. Herein, the pattern of expression of long noncoding RNA 00341 (LINC00341) as well as its biological function in bladder cancer were studied using CRISPR-CasRx. qRT-PCR was employed to quantify the levels of expression of LINC00341 in tumor tissues along with the matched non-tumor tissues. sgRNA targeting LINC00341 or the sgRNA negative control were transiently transfected into the T24 as well as 5,637 human bladder cancer cell lines. CCK-8, ELISA as well as wound healing methods were employed to explore cell proliferation, apoptosis and migration, respectively. The tumorigenicity experiment in nude mice also performed to detect cell proliferation. The expression of p21, Bax as well as E-cadherin were assayed using western blot. The results demonstrated that LINC00341 was overexpressed in bladder cancer in contrast with the healthy tissues. The LINC00341 expression level in high-grade tumors was higher in contrast with that in low-grade tumors. The expression of linc00341 was higher relative to that of non-invasive tumors. In T24 as well as 5637-cell lines harboring LINC00341-sgRNA, inhibition of cell proliferation (in vitro and in vivo), elevated apoptosis rate and diminished migration ability. Moreover, silencing LINC00341 upregulated the expressions of p21, Bax as well as E-cadherin. Knockout of these genes could eliminate the phenotypic changes caused by sgRNA targeting LINC00341. Our data demonstrate that LINC00341 has a carcinogenic role in human bladder cancer.

In the main olfactory epithelium (MOE), new olfactory sensory neurons (OSNs) are persistently generated to replace lost neurons throughout an organism's lifespan. This process predominantly depends on the proliferation of globose basal cells (GBCs), the actively dividing stem cells in the MOE. Here, by using CRISPR/Cas9 and RNAi coupled with adeno-associated virus (AAV) nose delivery approaches, we demonstrated that knockdown of miR-200b/a in the MOE resulted in supernumerary Mash1-marked GBCs and decreased numbers of differentiated OSNs, accompanied by abrogation of male behaviors. We further showed that in the MOE, miR-200b/a targets the ten-eleven translocation methylcytosine dioxygenase TET3, which cooperates with RE1-silencing transcription factor (REST) to exert their functions. Deficiencies including proliferation, differentiation, and behaviors illustrated in miR-200b/a knockdown mice were rescued by suppressing either TET3 or REST. Our work describes a mechanism of coordination of GBC proliferation and differentiation in the MOE and olfactory male behaviors through miR-200/TET3/REST signaling.

In this work, polyphenolic extract from walnut green husks (denoted as walnut polyphenols), which is an abundant agroindustrial residue/waste, was used to modify barium titanate (BT) particles in the preparation of silicone rubber (SR) based dielectric elastomer (DE) composites with enhanced electromechanical performance. By employing walnut polyphenols modification, the dispersibility of BT particles in the SR matrix and the compatibility between BT and SR were greatly improved, which resulted in enhanced mechanical performance of the DE composites. Dielectric property measurement showed that DE composites containing walnut polyphenols modified BT particles (WNBT) had higher dielectric constants and lower dielectric losses than that of DEs with unmodified BT particles. Furthermore, it was found that the walnut polyphenols modification resulted in decreased dielectric loss tangent of the DE composites, suggesting an improved compatibility between the modified BT particles and SR. Finally, the static and dynamic electromechanical performance of the DE composites were evaluated. The SR/5% WNBT composite achieved the highest actuated area strain of 38% among the SR based composites used in this work. Moreover, the actuated area strain of SR/WNBT composites exhibited excellent electromechanical stability during the application of cyclic voltage signals.

This paper reports surface hydrophilizing modification of polytetrafluoroethylene/glass fiber fabric by employing bio-inspired polydopamine functionalization. The modification process was accelerated by introducing sodium periodate (NaIO4) as oxidant. Surface morphology and chemical composition of the modified polytetrafluoroethylene/glass fiber fabric were characterized by using scanning electron microscopy, atomic force microscopy (AFM), and Fourier transform infrared spectroscopy, respectively. Hydrophilicity of the polytetrafluoroethylene/glass fiber fabric was investigated through water contact angle measurement. It was found that polydopamine successfully deposited on the surface of polytetrafluoroethylene/glass fiber fabric and the uniformity of the polydopamine coating increased with increasing modification time. Water contact angle of polytetrafluoroethylene/glass fiber fabric decreased after polydopamine modification and reached 29° when the sample was treated for 120 min, indicating an improved hydrophilic performance. The formed polydopamine coating was also demonstrated to have reliable chemical and mechanical stability.

In this paper, silver nanoparticles functionalized poly(ethylene terephthalate) (PET) fibers with antimicrobial activity, electrical conductivity and good coating stability are reported. Firstly, silver plated PET fibers were fabricated by rapid polydopamine (PDA) modification followed by electroless plating. Secondly, the surface morphologies and compositions of PDA modified and silver coated PET fibers were characterized by employing scanning electron microscopy, atomic force microscopy, X-ray diffraction and energy dispersive spectrometry. Finally, the antimicrobial properties and electrical conductivity of the silver plated PET fibers were investigated. The results showed that the silver coated PET fibers exhibited excellent antimicrobial activity to both Escherichia coli and Staphylococcus aureus (with an antimicrobial efficiency of 100 and 99.99%, respectively), and that the antimicrobial activity was well maintained after washing. The silver coated PET fibers showed electrical resistance of 0.76 Ω per 1 cm, indicating good conductivity. It was also demonstrated that the silver layer that formed had good mechanical durability, as indicated by conductivity measurements during tensile loading and observation of the surface morphology of the fibers under various modes of deformation.

The surface of polytetrafluoroethylene (PTFE)-fiberglass composite film was modified with polydopamine (PDA) in order to improve hydrophilic properties and hence to expand its perspective usage for biomedical and blood-contacting applications. Scanning electron microscopy, atomic force microscopy, energy dispersive spectrometer and fourier transform infrared spectra were employed to analyse the surface morphology and the chemical structures of the modified PTFE-fiberglass composite films. Hydrophilic property of PTFE-fiberglass composite films was investigated by using water contact angle measurement. The effect of treatment time on the surface morphology and hydrophilicity of PTFE-fiberglass composite films was investigated. The results showed that a dense layer of PDA was formed on PTFE-fiberglass composite films, the water contact angle decreased gradually with the increase in modification time. Moreover, the fastness of PDA layers deposited on the PTFE-fiberglass composite films was studied by using UV/VIS/NIR spectrometer. It was revealed that the PDA layer was stable in distilled water, 0.1 M hydrochloric acid solution and alcohol, but had a poor resistance to 0.1 M sodium hydroxide solution.

This work studied the feasibility of the melt-blown nonwovens which were made by blending thermoplastic polyurethane (TPU) with polypropylene (PP). Firstly, PP/TPU-blending pellets with different P...

Fiber-based strain sensors have attracted widespread concern of researchers due to large specific surface area, good stretchability and remarkable flexibility. In this work, a stretchable strain sensor with ultra-high working range was developed by using electrospun thermal plastic polyurethane (TPU) nanofibrous membrane coated with carboxyl multi-walled carbon nanotubes (CNTs). In order to obtain an even distribution and an improved fastness of carboxyl CNTs on TPU fibers, dopamine (DA) was employed to modify the TPU nanofibrous membrane (labelled DATPU) via a fast ultrasonication-assisted deposition approach. DATPU/CNTs exhibited an ultra-high working range of about 710% with high gauge factor up to 1200. Furthermore, DATPU/CNTs were found to have stronger washing fastness than TPU/CNTs owing to the introduction of DA onto the surface of TPU nanofibers. DATPU/CNTs also maintained good electrical conductivity during 15,000 cycles of stretching-releasing test. Finally, a prototype of strain sensor based on DATPU/CNTs membrane demonstrated remarkable flexibility and sensitivity to human body motions such as elbow bending, finger bending and swallowing.

In this work, a recently developed 3D additive processing technology termed electrohydrodynamic (EHD) printing was employed to fabricate dielectric elastomer (DE) films by using styrene-ethylene-butylene-styrene (SEBS) inks with the addition of high dielectric titanium dioxide (TiO2) nanoparticles. In order to improve the dispersibility of TiO2 in the SEBS matrix, extracted walnut polyphenols were utilized for surface modification of TiO2 nanoparticles labelled wp-TiO2. The effect of the applied voltage on the ink jet morphology of the obtained SEBS based inks during EHD printing was analyzed. The prepared films had precision patterned shapes and their morphology was studied. It revealed that the dispersibility of TiO2 nanoparticles in the SEBS matrix and their compatibility were greatly improved using this procedure. Furthermore, the printed DE films were found to have excellent mechanical, dielectric and electromechanical properties. For the range of DEs fabricated, the SEBS/10%wp-TiO2 composite exhibited the maximum actuated area strain of 21.5% at an electric field of about 34.0 V/μm without degradation of other properties.

A highly conductive nonwoven fabric with electromagnetic interference shielding and Joule heating performances is fabricated by coating silver nanowires/poly(3,4‐ethyl enedioxythiophene):poly(styrenesulfonate) on a commercial poly(m‐phenylene isophthalamide) nonwoven fabric through a multistep dip coating process.

Fatigue life prediction is of great significance in ensuring magnetorheological elastomer (MRE) based rubber components exhibit reliability and do not compromise safety under complex loading, and this necessitates the development of plausible fatigue life predictors for MREs. In this research, silicone rubber based MREs were fabricated by incorporating soft carbonyl iron magnetic particles. Equi-biaxial fatigue behaviour of the fabricated MREs was investigated by using the bubble inflation method. The relationship between fatigue life and maximum engineering stress, maximum strain and strain energy density were studied. The results showed that maximum engineering stress and stored energy density can be used as reliable fatigue life predictors for SR based MREs when they are subjected to dynamic equi-biaxial loading. General equations based on maximum engineering stress and strain energy density were developed for fatigue life prediction of MREs.