Search

Although the Antarctic lakes are of great importance for the climate and the carbon cycle, the lithological influences on the input of elements that are necessary for phytoplankton in lakes have so far been insufficiently investigated. To address this issue, we analyzed phytoplankton cell concentrations and chemical compositions of water samples from lakes, ponds and a stream on Fildes and Ardley Islands of King George Island in the South Shetland Archipelago. Furthermore, lake sediments, as well as soil and rock samples collected from the littoral zone were analyzed for their mineralogical/petrographic composition and pollutant contents of polycyclic aromatic hydrocarbons (PAHs). In addition, leaching experiments were carried out to with the lithologic samples to investigate the possible changes in pH, alkalinity, macronutrients (N, P, Si), micronutrients (e.g. Fe, Zn, Cu, Mn), anions (S, F, Br), and other cations (e.g. Na, K, Mg, Ca, Al, Ti, V, Cr, Co, Ni, As, Se, Pb, Sb, Mo, Ag, Cd, Sn, Ba, Tl, B). Our results showed that phytoplankton levels varied between 15 and 206 cells/mL. Chlorophyll-a concentrations showed high correlations with NH 4 , NO 3 . The low levels of PO 4 (<0.001 mg/L) indicated a possible P-limitation in the studied lakes. The composition of rock samples ranged from basalt to trachybasalt with variable major oxide (e.g. SiO 2 , Na 2 O and K 2 O) contents and consist mainly quartz, albite, calcite, dolomite and zeolite minerals. The concentrations of total PAHs were below the toxic threshold levels (9.55-131.25 ng g -1 dw). Leaching experiments with lithologic samples indicated major increase in pH (up to 9.77 ± 0.02) and nutrients, especially PO 4 (1.03 ± 0.04 mg/L), indicating a strong P-fertilization impact in increased melting scenarios. Whereas, toxic elements such as Pb, Cu, Cd, Al and As were also released from the lithology, which may reduce the phytoplankton growth., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: N. Olgun reports financial support was provided by Technological Research Council of Türkiye. N. Olgun reports a relationship with Technological Research Council of Türkiye that includes: funding grants., (Copyright © 2023 Elsevier B.V. All rights reserved.)

This study provides evidence of fine-grained genetic structuring in Mediterranean mussels (Mytilus galloprovincialis) from the Strait of Istanbul, caused by barriers to gene flow via contaminant-mediated selection. In this study, mitochondrial D-loop sequences were analyzed in mussels from 8 localities, all less than 30 kilometers apart, with differing contaminant loads. The results were: 1) Intra-population genetic differentiation (Φ ST ) between sites with high and low contaminant loads was high (up to 0.459), even at distances of only a few kilometers. 2) Genetic diversity was negatively correlated with the contaminant load ("genetic erosion"). 3) There was evidence of selection, based on haplotype frequencies and neutrality tests (Tajima's D), with purifying selection at the most contaminated site and balancing selection at the least contaminated. 4) Genetic distance was not correlated with geographic distance (no isolation-by-distance), but was correlated with contaminant load at each site. 5) Population dendrograms and Bayesian estimators of migration indicated that gene flow between sites was affected by contamination. For the dendrograms of the sampling sites, the clades clustered according to contaminant load more than geographic distance. Overall, these results suggest that 1) contamination may serve as a genotype-dependent dispersal barrier (i.e., contamination may not affect total number of migrants, just the relative proportions of the haplotypes in the established immigrants), leading strong population differentiation over short distances, and 2) genetic erosion may occur by a combination of selection and altered patterns of haplotype-specific gene flow. These effects may be more pronounced in the Strait of Istanbul than in other locations because of the riverine nature and strong, uni-directional current of the strait., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

The regions of Bolkar Mountains and Aladağlar accommodate a unique ecosystem in Turkey, due to being in a transitional climate between the continental and the Mediterranean and hosting alpine lakes which are considered as good indicators of regional and atmospheric pollution due to being far from direct human impact. On the other hand, these regions are surrounded by various power plants, and also subject to occasional human activities, where anthropogenic effects are expected to be. Sediment samples were collected from 12 lakes in Central Taurus Mountains, 6 lakes in Bolkar Mountains, and 6 lakes in Aladağlar. Fifteen PAHs, identified as priority pollutants by the US Environmental Protection Agency (EPA), as well as lake water chemical characteristics were determined. The distribution of analyzed PAHs was investigated, and PAH diagnostic ratios were calculated to identify their potential sources. It was a remarkable observation that only low-molecular-weight PAHs exist in the lakes of Aladağlar, whereas high-molecular-weight PAHs are also found in the lakes of Bolkar Mountains, likely reflecting more isolated characteristics of the Aladağlar region. As compatible with this observation, total PAHs (T-PAHs) were found lower in Aladağlar (0.00-105.78 ng/g w.w.) than in Bolkar Mountains (9.08-380.16 ng/g w.w.). Overall, T-PAHs of sampled lakes were found in a similar range when they are compared to the other high-altitude alpine lakes around the world, indicating no significant difference in terms of atmospheric pollution of the global average., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Pesticide registration in developing countries like Ethiopia is often not supported by substantiated risk assessment procedures. In this study, we evaluated the PRIMET (Pesticide Risks in the Tropics for Man, Environment and Trade) Registration&#95;Ethiopia&#95;1.1 model which is a tool developed to assess the risks to non-target protection goals. All the 103 registered active ingredients (a.i.) in Ethiopia, except those used for flower and storage pest control purposes, were evaluated on their environmental risks. Data on physico-chemical characteristics, toxicity and pesticide use patterns were mined from either the information given in the dossier or public databases. Together with scenarios specifically developed for Ethiopia, these data were used to perform a risk assessment for the aquatic and terrestrial environment as well as for vertebrates including humans via contaminated drinking water exposure. Results indicated that 11 and 16% of the a.i.s are indicated to pose high acute risk and 7.3 and 11% high chronic risks for fish and aquatic invertebrates, respectively. Similarly, 5.5 and 8.7% high acute risks and 6.8 and 3.9% high chronic risks were observed for the soil ecosystem and birds, respectively. 23% of the evaluated active ingredients were indicated to be highly risky to bees when beehives are present inside the sprayed crop while 7.8% of them are highly risky when beehives are present outside the field of the sprayed crop. The fungicide metalaxyl, the herbicides acetochlor, alachlor, mecoprop and tembotrion, and the insecticides carbaryl, chlorpyrifos, diazinon and methidathion were predicted to pose high acute or chronic risks to humans or other vertebrates if surface water is used as a source of drinking water. Future studies should give emphasis on how the risk assessment results of this study can be implemented to aid the registration process., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

In this study, two macroporous butyl rubber (BR)-based sorbents prepared in benzene (H-BR) and in cyclohexane (L-BR) with different porosities were synthesized by cryogelation technique. Their performances as a passive sampler were studied and then compared with commercially available silicon rubber (polydimethylsiloxane, PDMS) passive sampler. For that aim, polycyclic aromatic hydrocarbon (PAH) absorption rates of the sorbents in the short-term and their accumulation capacities in the long-term periods were investigated. Four PAHs (naphthalene, phenanthrene, fluoranthene, and pyrene) with a different number of aromatic rings were utilized. The concentrations of the PAHs in solutions were quantified by fluorescence spectrophotometer. The results showed that the BR sampler prepared in benzene (H-BR) generally has the highest absorption rates for all PAHs. The rate constants k (h -1 ) of the H-BR, L-BR, and PDMS samplers were found as 1.07, 0.55, and 0.55 for naphthalene; 0.73, 0.16, and 0.09 for phenanthrene; 0.24, 0.26, and 0.08 for fluoranthene; and 0.97, 0.38, and 0.17 for pyrene, respectively. The highest PAH absorption capacity was found for the BR sorbents prepared in benzene for all PAHs. Thus, benzene was selected as the organic solvent rather than cyclohexane for further studies in the preparation of butyl rubber-based samplers. The H-BR possessing the highest absorption rate and capacity underlines their usage as a capable passive sampler for both short- and long-term monitoring activities in the aquatic environments.

Over the past decades, large quantities of organic compounds including polycyclic aromatic hydrocarbons (PAHs) entering aquatic systems create acutely toxic effects and chronic abnormalities in aquatic organisms. Passive sampling is an effective technique to detect organic compounds at very low concentrations in water by accumulating them in their structure to a measurable concentration level. Polymeric passive samplers reported so far have a nonporous structure, and hence, the absorption of organic compounds into the passive sampler is governed by their slow diffusion process. We present here novel macroporous rubber sorbents as monophasic passive samplers with tunable pore morphologies, extraordinary mechanical properties, and high sorption rates and capacities for PAHs. Sorbent materials based on single-network (SN), double-network (DN), and triple-network (TN) butyl rubber were prepared via the cryogelation technique from butyl rubber solutions in benzene as the solvent at -18 °C using a sulfur monochloride cross-linker. To obtain macroporous rubbers with DN and TN structures, the reactions were conducted in the macropores of SN and DN rubber networks, respectively. The porous morphology and the mechanical behavior of the rubbers can be tuned by adjusting the weight ratio w R of the network components. The rubbers exhibit two generations of pores, namely, large and small pores with diameters 40-240 and 14-54 μm, respectively. The sizes of both large and small pores decrease and approach each other as w R is increased. Four PAH compounds, namely, naphthalene, phenanthrene, fluoranthene, and pyrene with two to four aromatic rings, dissolved in filtered seawater with a salinity of 22 ppt were used to highlight the correlations between the properties of macroporous rubbers and their absorption rates and capacities. Nonporous silicone rubber reported before as a passive sampler has the lowest absorption rate and capacity as compared to the macroporous rubbers. The SN rubber absorbs most rapidly PAHs because of its largest porosity, whereas the TN rubber with the smallest pores exhibits the highest sorption capacity.

This study involves the monitoring of organic pollutants using transplanted mussels (Mytilus galloprovincialis) as bioindicator organisms and semipermeable membrane devices (SPMDs) as passive samplers. Mussels and SPMDs were deployed to marinas, shipyards and shipbreaking yards on the coastal area of Turkey and retrieved after 60 days. Polycyclic aromatic hydrocarbons (PAH), polychlorinated biphenyls (PCB) and organochlorine pesticide (OCP) compounds were analysed with high-resolution GC-MS. Total PAH concentrations in SPMDs and mussels ranged from 200 to 4740 ng g sampler -1 and from 7.0 to 1130 ng g -1 in wet weight (ww). PCB and OCP concentrations in SPMDs changed between 0.04-200 and 4.0-26 ng g sampler -1 , respectively. The highest PCB (190 ng g -1  ww) and OCP (200 ng g -1 ww) concentrations in mussels were measured at shipyard stations. A strong correlation was observed between the PAH and PCB concentrations in SPMDs and mussels. Enzyme assays (acetylcholinesterase, ethoxyresorufin-O-deethylase, glutathione S-transferase, glutathion reductase and carboxylesterase activities) were performed as biomarkers to reveal the effects of pollution on the mussels. There was no clear relationship found between the enzyme levels and the pollutant concentrations in mussels. Integrated biomarker responses were calculated to interpret the overall effect of pollutants.

Polycyclic aromatic hydrocarbons (PAHs) are important organic pollutants in the aquatic environment due to their persistence and bioaccumulation potential both in organisms and in sediments. Benzo(a)anthracene (BaA) and phenanthrene (PHE), which are in the priority pollutant list of the U.S. EPA (Environmental Protection Agency), are selected as model compounds of the present study. Bioaccumulation and depuration experiments with local Mediterranean mussel species, Mytilus galloprovincialis were used as the basis of the study. Mussels were selected as bioindicator organisms due to their broad geographic distribution, immobility and low enzyme activity. Bioaccumulation and depuration kinetics of selected PAHs in Mytilus galloprovincialis were described using first order kinetic equations in a three compartment model. The compartments were defined as: (1) biota (mussel), (2) surrounding environment (seawater), and (3) algae (Phaeodactylum tricornutum) as food source of the mussels. Experimental study had been performed for three different concentrations. Middle concentration of the experimental data was used as the model input in order to represent other high and low concentrations of selected PAHs. Correlations of the experiment and model data revealed that they are in good agreement. Accumulation and depuration trend of PAHs in mussels regarding also the durations can be estimated effectively with the present study. Thus, this study can be evaluated as a supportive tool for risk assessment in addition to monitoring studies., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

In the present work, the concentration of eight metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn) was determined in the sediments and transplanted and native mussels (Mytilus galloprovincialis). The study was conducted in Turkish marinas, shipyards, and shipbreaking yards. The effect of metal pollution was evaluated by determining the levels of metallothionein (MT) in the mussels. The extent of contamination for each single metal was assessed by using the geoaccumulation index (I geo) and enrichment factor (EF). Whereas, to evaluate the overall metal pollution and effect, the pollution load index (PLI), modified contamination degree (mC d), potential toxicity response index (RI), mean effects range median (ERM) quotient (m-ERM-Q), and mean PEL quotient (m-PEL-Q) were calculated. The influence of different background values on the calculations was discussed. The results indicated a significant metal pollution caused by Cu, Pb, and Zn especially in shipyard and shipbreaking sites. Higher concentrations of MT were observed in the ship/breaking yard samples after the transplantation.

Triolein-containing semipermeable membrane devices (SPMDs) and butyl rubber (BR) based sorbents were employed as passive samplers in 14 coastal stations of Turkey including shipyards and marinas to characterize time-integrated levels of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) and their relationship to potential pollution sources. Passive samplers of SPMDs and BR sorbents were deployed for 30days in the spring of 2012. The maximum concentrations of total PAH and PCB compounds sequestered by SPMDs were 3338 ng g(-1) SPMD and 4247 pg g(-1) SPMD. (END)-I and DDT-related compounds were dominant OCP compounds for most of the sites in passive samplers. Total PAH concentrations in SPMDs were found 1.2 to 8 times higher than the concentrations in BRs. However, BR sorbents were able to sample some PAHs which could not be sampled by SPMDs. The concentrations of PCBs and OCPs in BRs were similar or higher than SPMDs. SPMD-data were used to estimate the average ambient water concentrations of the contaminants. Two existing theoretical approaches have been used to derive the concentrations of hydrophobic pollutants in the ambient waters. The results were found very similar and range from 7318 to 183864 pg L(-1) for PAHs, from 2 to 186 pg L(-1) for PCBs, and from 98 to 848 pg L(-1) for OCPs. Furthermore, a simple numerical model was designed to estimate the boat-related water concentrations in marinas by using the seawater data supplied by SPMDs. The model was mainly built on the water concentration and the capacities of a particular marina and then applied to two sites in the second marina. A good correlation was found between the model outputs and SPMD-water data., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Concentrations of PAHs, PCBs and OCPs in sediments and mussels (caged and/or native) were determined at 16 stations in six major sites of coastal Turkey. The biological effects of pollution were evaluated using sediment toxicity tests and enzyme activity assays. EROD, PROD, GST, AChE, CaE, and GR activities were evaluated using the digestive glands of mussels. The total PAH concentrations in the sediments varied between nd and 79,674 ng g(-1) dw, while the total OCP concentrations were in the range of nd to 53.7 ng g(-1) dw. The total PAH concentrations in mussels varied between 22.3 and 37.4 ng g(-1) ww. The average concentrations of total PCBs in mussels were 2795 pg g(-1) ww in the shipyard, 797 pg g(-1) ww in Marina 2 and 53 pg g(-1) ww in Marina 1 stations. The results of whole-sediment toxicity tests showed a strong correlation between toxicity test results and pollutant concentrations. Selected cytosolic enzyme activities in digestive glands differed significantly depending on localities. These differences in enzyme activities were mainly related to the different pollutant levels of the sampling sites. The micro-organic contaminant profile patterns, toxicity tests and biomarker studies showed that shipyards and shipbreaking yards are the major potential sources of organic pollution in coastal areas., (Copyright © 2014 Elsevier B.V. All rights reserved.)

In this study, Mediterranean mussel species, Mytilus galloprovincialis, were exposed to phenanthrene (PHE) due to its ubiquitousness and bioavailability in the aquatic environment. Kinetic parameters of the PHE bioaccumulation and depuration were calculated for an 11-day uptake and subsequent 11-day depuration periods. Those values of kinetic rate constants for uptake and depuration of PHE were calculated as varying between 93-177 and 0.18-0.25, respectively. Negative correlation was observed between the PHE concentrations and kinetic rate constants. Bioaccumulation Factors (BAFs) for the mussels exposed to different PHE concentrations were calculated from both kinetic rate constants and from the experimental data and found between 509-701 and 441-658, respectively. Experimental quantitative structure activity relationship (QSAR) values for PHE were found comparable to the calculated QSARs reported in literature. Two sub-lethal biomarker methods (filtration rate and lysosomal stability) were applied to observe the responses of the mussels throughout the experimental period. Results of both biomarkers show that PHE negatively affects mussels during the uptake of PHE, and mussels were able to recover physiologically at the end of depuration period according to the filtration rate results.

Large amounts of polycyclic aromatic hydrocarbons (PAHs) have been released to the marine environment as a result of oil spills and from other sources including wastewaters, surface runoff, industrial processes, atmospheric deposition, biosynthesis, and natural events such as forest fires. PAHs have been known to affect a variety of biological processes and can be potent cell mutagens/carcinogens and toxic. In this study, PAH toxicity removal was investigated by using a novel macroporous butyl rubber (BR) sorbent. To find out the toxicity removal efficiency of the sorbents, the toxicity tests with Vibrio fisheri (luminescence bacteria) and Phaeodactylum tricornutum (marine algae) were applied to the acenaphthene (Ace) and phenanthrene (Phen) solutions in seawater (Ace: 500- 1000 μg/L; Phen; 100-1000 μg/L) before and after sorbent applications. Additionally, lysosomal stability and filtration rate biomarker techniques were applied to the mussels (Mytilus galloprovincialis) exposed to 1000 μg/L Phen solution and bioaccumulation was measured. The results showed that the toxicity of the PAH solutions decreased 50-100 percent depending on the concentration of the solutions and organisms. Phaeodactylum was found as the most sensitive organism to Phen and Ace. Since the application of BR sorbent removed the Phen from the solution, the bioaccumulated Phen amount in the mussels decreased accordingly.

Polycyclic aromatic hydrocarbons (PAHs) are important environmental pollutants due to their persistence and bioaccumulation potential both in organisms and in sediments. In this study, bioaccumulation and depuration experiments were performed employing local Mediterranean mussel species, Mytilus galloprovincialis, with two biomarkers: filtration rate and lysosomal stability (neutral red retention) assay. Benzo(a)anthracene (BaA) was chosen as the model PAH compound due to its common presence in several matrices in the marine environment. Bioconcentration Factors (BCFs) for the mussels exposed to different BaA concentrations were calculated from both kinetic rate constants and from the experimental data and found between 27-3184 and 16-2745, respectively. Experimental QSAR values were found comparable to the previous QSAR models created for BaA. The effect of BaA exposure on the mussels showed a more clear dose-response relationship according to the results of lysosomal stability compared to the filtration rate., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Ecological disasters resulting from oil spills have created a great need to find more efficient materials for oil spill cleanup. This research highlights the use of a novel macroporous polymeric material based on butyl rubber (BR) as a sorbent in an oil spill cleanup. The sorption capacity of BR for crude oil and petroleum products is 15-23 g g(-1) as compared to the value of 10-16 g g(-1) obtained using a nonwoven polypropylene (PP), a widely used commercial oil sorbent. BR sorbent is reusable after simple squeezing and its continuous sorption capacity for crude oil is 7.6 g g(-1) in each cycle, about 3 times the capacity of the PP sorbent BR sorbents also remove efficiently polycyclic aromatic hydrocarbons (PAHs) such as acenaphthene and pyrene from seawaters. The results suggest that the rubber sorbents are a better alternative to the widely used PP sorbents by improving the efficiency of oil sorption and the reusability of the sorbent.