Search

In this study, extractives from Pinus rigida heartwood (PRW), Eucalyptus camaldulensis var. obtusa aerial parts (ECL), and Eucalyptus flower buds (ECF) were used as additives in paper sheets produced from the pulp of linen fibers, and their effects on the mechanical and antifungal properties of the paper sheets were studied. The highest tensile and tear indices were 31.5 Nm/g, and 17.3 mNm2/g as pulp treated with PRW (4%), and ECL (1%), respectively. All the pulp additives yielded lower burst index values compared to the control (2.24 KPa.m2/g); the nearest value was 2.23 KPa.m2/g (ECL 4% pulp additive). The brightness percentages (ISO%) ranged from 65.7% to 70.2%, which were lower than the control treatment (70.3%). The paper sheets produced from pulp treated with 2% or 4% PRW, and with 4% ECL suppressed Aspergillus niger growth on the paper disc; pulp treated with 2% or 4% PRW, 4% ECL, and with 2% or 4% ECF completely suppressed A. terreus growth. However, all pulp extract additives did not inhibit the growth of Fusarium culmorum.

Ordinary kraft pulping of bagasse was adjusted by utilizing green liquor at the laboratory and research of Misr-Edfu Pulp, Writing and Printing Paper in a small pilot batch digester (Edfu, Aswan, Egypt) as an environmentally friendly method. Bagasse pulp was produced with and without green liquor, and the physical and mechanical properties of unbleached bagasse were assessed. The parameter states of cooking were completed utilizing antacid substance charge from 10% to 13%, cooking temperature from 160 to 170 °C, cooking time from 20 to 50 min, and solid to liquor ratio of 7:1 that was steady in all preliminaries. The results demonstrated the exploratory idea that green liquor can provide critical pulping advantages in comparison with customary kraft pulping. Screened pulp yield improved 2.6%, rejects content decreased 0.9%, kappa number was reduced by 26.9%, and brightness was increased by 3%. There also was improved mechanical quality of bagasse pulp: increases of 14.3% (tensile index), 8.7% (tear index record), 4.6% (burst index), and 15.4% (double fold number) were observed compared with conventional kraft pulping. This process also saved money related to the expense of depleted vitality, lime consumed during causticizing process, and upkeep of the causticizing plant.

Organic industrial materials are exposed to fungal deterioration; to prevent this, several additives can be used. In the present work, Egyptian cotton linters, linen textile, and parchment (goat skin) provided from industrial zones in Egypt were used. The application of eco-friendly essential oils (EOs) isolated from Pinus rigida wood and Origanum majorana green leaves to cotton linter paper pulp (CLP), linen textile, and parchment as bio-fungicides to protect against the growth of Aspergillus terreus, Aspergillus flavus, and Aspergillus niger was evaluated using the fungal growth inhibition (FGI) assay and examined under SEM to show the extent of fungal infestation. By gas chromatography-mass spectrometry (GC–MS) analysis, the abundant compounds in P. rigida EO were determined to be 2-methylisoborneol (29.52%), and 4-isopropyl-5-methylhex-2-yne-1,4-diol (16.53%); in O. majorana EO, they were determined to be cis-β-terpineol (15.4%), terpinen-4-ol (14.39%), oleic acid (10.75%), and D-limonene (8.49%). CLP treated at a level of 500 μL/L with O. majorana EO showed a higher FGI against A. niger (47.66%), while P. rigida EO showed a higher FGI against A. flavus (74%) and A. terreus (100%). Parchment treated with 500 μL/L of O. majorana EO showed an FGI of 49% against the growth of A. niger, while P. rigida EO treated at a level of 500 μL/L showed FGIs of 78% and 100% against A. flavus and A. terreus, respectively. Linen textile treated with O. majorana EO at a level of 500 μL/L showed a higher FGI (49%) against A. niger, while P. rigida EO showed a higher activity against A. flavus (FGI 77.3%) and A. terreus (FGI 100%). The examined SEM images of materials treated with the EOs confirmed how these EOs suppressed or prevented the growth of molds compared with the control treatments. The findings indicate that the EOs from P. rigida and O. majorana considerably enhanced the performance of CLP, linen textile, and parchment materials; therefore, they can be recommended as promising antifungal agents with which to extend the shelf-life of these materials. This study shows the high effectiveness of the addition of natural oils that contain bioactive compounds to natural raw materials (CLP, linen textile, and parchment) in protecting against the growth of fungi. Subsequently, it is possible to protect these raw materials from deterioration and damage and prolong their lives as long as possible while maintaining the natural and mechanical specifications of the raw materials, especially in atmospheric conditions with a high humidity.

The accelerated ageing of wood in terms of heating or iron rusting has a potential effect on the physio-mechanical, chemical and biological properties of wood. The effects of accelerated ageing on the mechanical, physical and fungal activity properties of some wood materials (Schinus terebinthifolius, Erythrina humeana, Tectona grandis, Pinus rigida and Juglans nigra) were studied after several cycles of heating and iron rusting. The fungal activity was assayed against the growth of Aspergillus terreus, Aspergillus niger, Fusarium culmorum and Stemphylium solani. In addition, the mechanical and optical properties of paper sheets produced from those wood pulps by means of Kraft cooking were evaluated. The mechanical and chemical properties of the studied wood species were affected significantly (p < 0.05) by the accelerated ageing, compared to control woods. With Fourier transform infrared (FTIR) spectroscopy, we detected an increase in the intensity of the spectra of the functional groups of cellulose in the heated samples, which indicates an increase in cellulose content and decrease in lignin content, compared to other chemical compounds. For pulp properties, woods treated by heating showed a decrease in the pulp yield. The highest significant values of tensile strength were observed in pulp paper produced from untreated, heated and iron-rusted P. rigida wood and they were 69.66, 65.66 and 68.33 N·m/g, respectively; we calculated the tear resistance from pulp paper of untreated P. rigida (8.68 mN·m2/g) and T. grandis (7.83 mN·m2/g) and rusted P. rigida (7.56 mN·m2/g) wood; we obtained the values of the burst strength of the pulp paper of untreated woods of P. rigida (8.19 kPa·m2/g) and T. grandis (7.49 kPa·m2/g), as well as the fold number of the pulp paper of untreated, heated and rusted woods from P. rigida, with values of 195.66, 186.33 and 185.66, respectively. After 14 days from the incubation, no fungal inhibition zones were observed. Accelerated ageing (heated or iron-rusted) produced significant effects on the mechanical and chemical properties of the studied wood species and affected the properties of the produced pulp paper.

The main objective of this work was to evaluate pulp produced by kraft cooking for wood materials (WMT) (Bougainvillea spectabilis, Ficus altissima, and F. elastica) and non-wood materials (NWMT) (Sorghum bicolor and Zea mays stalks) and to study the fungal activity of handsheets treated with Melia azedarach heartwood extract (MAHE) solutions. Through the aforementioned analyses, the ideal cooking conditions were determined for each raw material based on the lignin percentage present. After cooking, pulp showed a decrease in the Kappa number produced from WMT, ranging from 16 to 17. This was in contrast with NWMT, which had Kappa numbers ranging from 31 to 35. A difference in the optical properties of the pulp produced from WMT was also observed (18 to 29%) compared with pulp produced from NWMT (32.66 to 35.35%). As for the evaluation of the mechanical properties, the tensile index of the pulp ranged from 30.5 to 40 N·m/g for WMT and from 44.33 to 47.43 N·m/g for NWMT, the tear index ranged from 1.66 to 2.55 mN·m2/g for WMT and from 4.75 to 5.87 mN·m2/g for NWMT, and the burst index ranged from 2.35 to 2.85 kPa·m2/g for WMT and from 3.92 to 4.76 kPa·m2/g for NWMT. Finally, the double fold number was 3 compared with that of pulp produced from pulp, which showed good values ranging from 36 to 55. In the SEM examination, sheets produced from treated handsheets with extract from MAHE showed no growth of Aspergillus fumigatus over paper discs manufactured from B. speclabilis pulp wood. Pulp paper produced from Z. mays and S. bicolor stalks was treated with 1% MAHE, while pulp paper from F. elastica was treated with 0.50% and 1% MAHE. With the addition of 0.5 or 1% MAHE, Fusarium culmorum showed no increase in growth over the paper manufactured from B. speclabilis, F. altissima, F. elastica and Zea mays pulps with visual inhibition zones found. There was almost no growth of S. solani in paper discs manufactured from pulps treated with 1% MAHE. This is probably due to the phytochemical compounds present in the extract. The HPLC analysis of MAHE identified p-hydroxybenzoic acid, caffeine, rutin, chlorogenic acid, benzoic acid, quinol, and quercetin as the main compounds, and these were present in concentrations of 3966.88, 1032.67, 834.13, 767.81, 660.64, 594.86, and 460.36 mg/Kg extract, respectively. Additionally, due to the importance of making paper from agricultural waste (stalks of S. bicolor and Z. mays), the development of sorghum and corn with high biomass is suggested.

In the present study, novel mixed additives of Chitosan or Paraloid B-72 combined with nanoparticles (NPs) of Ag, ZnO, or cellulose (NCL) were examined for their effects on the mechanical, optical, and fungal inhibition properties of the papersheets produced. The highest tensile, tear, and burst indices of the papersheets were observed for flax pulp treated with additives of Paraloid B-72 + ZnO NP (1%), Chitosan + ZnO NP (3%), and Chitosan + NCL (3%) at levels of 59.93 N&middot, m/g, 18.45 mN&middot, m2/g, and 6.47 kPa&middot, m2/g, respectively. Chitosan + ZnO NP (1%) added to flax pulp showed the highest fungal mycelial inhibition (FMI) (1.85%) against Aspergillus flavus. Chitosan + Ag NP (1%) exhibited the highest FMI percentage (11.48%) when added to pulp against A. terreus. Pulp treated with Paraloid B-72 + Ag NP (1%) exhibited the highest activity against Stemphylium solani with an FMI value of 3.7%. The results indicate that the technological properties of the papersheets were enhanced with the addition of novel mixtures to the pulp.

In the pulp and paper industry, several studies have been done to improve and enhance the properties of the mechanical, optical, and antimicrobial activities of pulp produced with different additives. In the present study, pulp of wood branches (WBs) from Eucalyptus camaldulensis Dehnh. and Meryta sinclairii (Hook.f.) Seem. was treated with n-hexane oily extracts (HeOE) from Melia azedarach L. fruits, Magnolia grandiflora L. leaves, and Sinapis alba L. seeds as additives at concentrations of 1%, 3%, and 5% based on oven-dry pulp weight. Measured mechanical properties were higher in paper sheets made from E. camaldulensis than M. sinclairii WB pulp. The highest tensile index values were observed with E. camaldulensis WB pulp treated with 5% HeOEs of S. alba (33.90 N&middot, m/g) and M. grandiflora (33.76 N&middot, m/g) compared to control (32.10 N&middot, m/g), the highest tear index with 5% HeOE of S. alba (4.11 mN&middot, m2/g) compared to control (3.32 mN&middot, m2/g), and the highest burst index with 5% HeOE of S. alba (4.11 kPa&middot, m2/g) compared to control (3.08 kPa&middot, m2/g). The highest double-fold number value (9) was observed with E. camaldulensis WB pulp treated with 5% HeOEs of S. alba, M. azedarach, and M. grandiflora but with no significant difference compared to control treatment (8.33) or other HeOE treatments with E. camaldulensis WB pulp. Scanning electron microscope (SEM) examination showed clear inhibition of the growth of Aspergillus terreus with WB pulp paper discs of E. camaldulensis and M. sinclairii treated with HeOEs of M. azedarach, S. alba, and M. grandiflora at 3% and 5% compared to control treatment, while HeOEs at 5% concentration showed no growth of A. niger and A. terreus. The present findings establish that the HeOEs from M. azedarach, S. alba, and M. grandiflora at 3% and 5% are novel natural products that can be used as alternatives to improve the properties and antifungal activity of WB pulp produced from E. camaldulensis and M. sinclairii.