Search

As the technology scales down to 90 nm and below, static random access memory (SRAM) standby leakage power is becoming one of the most critical concerns for low power applications. In this article, we review three major leakage current components of SRAM cells and also discuss some of the leakage current reduction techniques including body biasing, source biasing, dynamic VDD, negative wordline, and bitline floating schemes. All of them are achieved by controlling different terminal voltages of the SRAM cell in standby mode. On the other hand, performance loss occurs simultaneously with leakage saving. To validate the effectiveness of low power techniques, the leakage current, static noise margin, and read current of SRAM cells, based on the UMC 55 nm CMOS process with leakage current reduction techniques has been simulated. The results indicate that by using the dynamic VDD and source biasing schemes, greater leakage suppressing capability, although with a higher performance loss, can be obtained. Therefore, the SRAM cell optimization scheme must consider the trade-off between power consumption and speed performance. [ABSTRACT FROM AUTHOR]

Polyaniline-coated multi-walled carbon nanotube (MWCNT) conductive polymer precursors (MWCNTs@PANI) were prepared by an in situ microemulsion oxidation polymerization of aniline in the case of MWCNTs, and then hydroxyl-terminated polybutadiene polyurethane conductive polymer nanocomposites based on MWCNTs@PANI (MWCNTs@PANI/HTPB PUs) were prepared through an in situ stepwise polymerization of HTPB and diisocyanates. The chemical structure was characterized by Fourier transform infrared spectroscopy (FTIR), Raman, x-ray diffraction, x-ray photoelectron spectroscopy and thermogravimetric analysis. The morphologies and dispersion behavior were examined by scanning electron microscopy, transmission electron microscopy and UV–vis transmittance. The MWCNTs@PANI/HTPB PUs nanocomposites were fabricated into film sensors for detection of volatile organic compound vapors, and displayed an evident response to trichloromethane vapor (CHCl3). The effect of MWCNTs on the conductivity and the responsivity to trichloromethane of conductive polymer nanocomposite films were studied, finding that the conductive composite films have fast and strong response, good repeatability and recoverability, and long-term stability. Consequently, they can be potentially applied for supervision and detection of interior and outdoor environmental gases or vapors. [ABSTRACT FROM AUTHOR]