Search

Fabricating efficient non‐platinum‐group‐metal catalysts for the oxygen reduction reaction (ORR) in proton‐exchange membrane fuel cells still remains a big challenge. This study creates a unique bamboo‐like architecture of Mn and Fe single atomic sites (SASs) anchored on core‐shell structure of nanopaticles@carbon nanotubes (MnFe SASs/NPs@CNTs) via a precursor route, where the Fe nanoparticles (NPs) (identified as γ‐Fe and Austenite) are confined into CNTs, such an architecture exhibits compelling ORR activity and durability in 0.1 m HClO4. Experiments and calculations both reveal that the electron donor–acceptor paradigm between Mn SASs and Fe NPs launches a lattice‐electron coupling mechanism not only increasing occupation of π‐antibonding orbital in Mn−*O intermediates but also rising Jahn–Teller effect, thereby destabilize the Mn−*O intermediate and eventually facilitate the potential‐limiting step from *O to *OH. Such a coupling activation of the ORR‐inert Mn SASs greatly improves ORR performances of MnFe SASs/NPs@CNTs. [ABSTRACT FROM AUTHOR]

Sapphire has increasing demand toward optoelectrical devices like LED; its big challenge is to find reasonable growth mechanisms for high quality large size single crystals. In this paper, we proposed both theoretical and experimental studies to clarify multiscale behaviors within the Al2O3 growth system. Molecular dynamics simulation for sapphire crystal growth along c-, a-, and m-axes, and solid–liquid interface structure, and grown 2″ sapphire via the Czochralski method along the c-axis, were reported herein. Our studies show that α-Al2O3 growth behaviors along different crystal directions are different, which is different from the amorphous Al2O3 phase transition at the various α-Al2O3 planes. α-Al2O3 crystal growth in the c-axis system may be a complex process involving solid–liquid and solid–solid transformations, rather than a single solid–liquid transformation that happened in the systems growing along the a- and m-axes. Within the time scale of simulation, the crystals cannot be grown by the lattice period of the seed crystal along the c-axis and transform into γ-Al2O3 rather than α-Al2O3, while it is opposite along the a- and m-axes. This may be the microscopic reason why it is difficult to grow sapphire along the c-axis in the experiment. An abrupt change in the interfacial structure is the key reason to inhibit the transformation of liquid Al2O3 into α-Al2O3 along the c-axis. [ABSTRACT FROM AUTHOR]

Recently, Ni-rich LiNixCoyMn1−x−yO2 (x ≥ 0.8) draw significant research attention as cathode materials in lithium-ion batteries due to their superiority in energy density. However, the oxygen release and the transition metals (TMs) dissolution during the (dis)charging process lead to serious safety issues and capacity loss, which highly prevent its application. In this work, we systematically explored the stability of lattice oxygen and TM sites in LiNi0.8Co0.1Mn0.1O2(NCM811) cathode via investigating various vacancy formations during lithiation/delithiation, and properties such as the number of unpaired spins (NUS), net charges, and d band center were comprehensively studied. In the process of delithiation (x = 1 → 0.75 → 0), the vacancy formation energy of lattice oxygen [Evac(O)] has been identified to follow the order of Evac(O–Mn) > Evac(O–Co) > Evac(O–Ni), and Evac(TMs) shows a consistent trend with the sequence of Evac(Mn) > Evac(Co) > Evac(Ni), demonstrating the importance of Mn to stabilize the structural skeleton. Furthermore, the |NUS| and net charge are proved to be good descriptors for measuring Evac(O/TMs), which show linear correlations with Evac(O) and Evac(TMs), respectively. Li vacancy plays a pivotal role on Evac(O/TMs). Evac(O/TMs) at x = 0.75 vary extremely between the NiCoMnO layer (NCM layer) and the NiO layer (Ni layer), which correlates well with |NUS| and net charge in the NCM layer but aggregates in a small region in the Ni layer due to the effect of Li vacancies. In general, this work provides an in-depth understanding of the instability of lattice oxygen and transition metal sites on the (104) surface of Ni-rich NCM811, which might give new insights into oxygen release and transition metal dissolution in this system. [ABSTRACT FROM AUTHOR]

Rechargeable Na‐CO2 batteries are considered to be an effective way to address the energy crisis and greenhouse effect due to their dual functions of CO2 fixation/utilization and energy storage. However, the insolubility and irreversibility of solid discharge products lead to poor discharge capacity and poor cycle performance. Herein, a novel strategy is proposed to enhance the electrochemical performance of hybrid Na‐CO2 batteries, using water‐in‐salt electrolyte (WiSE) to establish an optimal reaction environment, regulate the CO2 reduction pathway, and ultimately convert the discharge product of the battery from Na2CO3 to formic acid (HCOOH). This strategy effectively resolves the issue of poor reversibility, allowing the battery to exhibit excellent cycle performance (over 1200 cycles at 30 °C), especially under low‐temperature conditions (2534 cycles at −20 °C). Furthermore, density functional theory (DFT) calculations and experiments indicate that by adjusting the relative concentration of H/O atoms at the electrolyte/catalyst interface, the CO2 reduction pathway in the battery can be regulated, thus effectively enhancing CO2 capture capability and consequently achieving an ultra‐high discharge specific capacity of 148.1 mAh cm−2. This work effectively promotes the practical application of hybrid Na‐CO2 batteries and shall provide a guidance for converting CO2 into products with high‐value‐added chemicals. [ABSTRACT FROM AUTHOR]