Search

Topological defects in ferroic materials can exhibit intrinsic properties that differ from the bulk. Here， structural and electronic variations of non‐prominent (W') ferroelastic twin domain walls are investigated in BiVO4, a widely investigated photocatalytic material. Using aberration‐corrected scanning transmission electron microscopy (STEM), a kink configuration of the sharp ferroelastic twin wall with an altered electronic structure is revealed. Nanoscale conductivity measurements by conductive atomic force microscopy (c‐AFM) show higher conductivity at twin walls compared to non‐conductive bulk domains. Electronic structure investigation by electron energy loss spectroscopy (EELS) shows a higher density of oxygen vacancies and possible polaron accumulation at the wall. These findings reveal the electronic properties of BiVO4 domain walls, which are interesting for nanoscale‐engineered catalytic concepts of BiVO4 and materials design for photochemistry‐relevant applications. [ABSTRACT FROM AUTHOR]

Topological defects in ferroic materials can exhibit intrinsic properties that differ from the bulk. Here， structural and electronic variations of non‐prominent (W') ferroelastic twin domain walls are investigated in BiVO4, a widely investigated photocatalytic material. Using aberration‐corrected scanning transmission electron microscopy (STEM), a kink configuration of the sharp ferroelastic twin wall with an altered electronic structure is revealed. Nanoscale conductivity measurements by conductive atomic force microscopy (c‐AFM) show higher conductivity at twin walls compared to non‐conductive bulk domains. Electronic structure investigation by electron energy loss spectroscopy (EELS) shows a higher density of oxygen vacancies and possible polaron accumulation at the wall. These findings reveal the electronic properties of BiVO4 domain walls, which are interesting for nanoscale‐engineered catalytic concepts of BiVO4 and materials design for photochemistry‐relevant applications. [ABSTRACT FROM AUTHOR]

The role of KRAS mutation in non‐small cell lung cancer (NSCLC) initiation and progression is well‐established. However, "undruggable" KRAS protein poses the research of small molecule inhibitors a significant challenge. Addressing this, proteolysis‐targeting chimeras (PROTACs) have become a cutting‐edge treatment method, emphasizing protein degradation. A modified ethanol injection method was employed in this study to formulate liposomes encapsulating PROTAC drug LC‐2 (LC‐2 LPs). Precise surface modifications using cell‐penetrating peptide R8 yielded R8‐LC‐2 liposomes (R8‐LC‐2 LPs). Comprehensive cellular uptake and cytotoxicity studies unveiled that R8‐LC‐2 LPs depended on concentration and time, showcasing the superior performance of R8‐LC‐2 LPs compared to normal liposomes. In vivo pharmacokinetic profiles demonstrated the capacity of DSPE‐PEG2000 to prolong the circulation time of LC‐2, leading to higher plasma concentrations compared to free LC‐2. In vivo antitumor efficacy research underscored the remarkable ability of R8‐LC‐2 LPs to effectively suppress tumor growth. This study contributed to the exploration of enhanced therapeutic strategies for NSCLC, specifically focusing on the development of liposomal PROTACs targeting the "undruggable" KRAS protein. The findings provide valuable insights into the potential of this innovative approach, offering prospects for improved drug delivery and heightened antitumor efficacy. [ABSTRACT FROM AUTHOR]

Lead-cooled fast reactors exhibit strong inherent safety performance and good economic features, while material degradation due to corrosion and irradiation is still challenging. Oxide dispersion-strengthened steels are one of the promising candidates for fuel cladding materials. The effects of both irradiation and corrosion on ODS steel need to be further studied. In this work, MX-ODS steel was irradiated by Fe ions at 500 °C up to 46 dpa. Later, the as-received specimen and the irradiated specimen were used to conduct corrosion tests in oxygen-saturated Pb at 550 °C for 1 h. In the as-received specimen, discontinuous oxides penetrated by Pb and Pb in contact with steel matrix were observed, demonstrating unsatisfactory corrosion resistance of the material. However, in the irradiated specimen after corrosion experiment, a protective oxide layer formed and prevented Pb attack. The oxidation behavior differences between the two specimens can be attributed to the defects produced by irradiation and the structural discrepancy in oxides caused by the formation process. A possible mechanism of irradiation on the corrosion is discussed. In the as-received specimen, Fe atoms loss led to voids in the oxides, and lead penetrated the oxides through these voids. In the irradiated specimen, defects left by previous irradiation helped to form a more uniform oxide layer. The adhesive outer magnetite oxide and the Fe ions generated from where grain boundary oxidation developed retarded the presence of voids and made the oxide layer protective. [ABSTRACT FROM AUTHOR]

To explore the effect of design parameters on the mechanical performance of the proposed all-steel buckling-restrained brace (BRB), the finite element software ABAQUS is adopted. The brace consists of an inner round steel tube and an outer square steel tube to restrain its inner core, designed with both the cruciform-section core and the H-section steel core. Quasi-static tests are performed on the all-steel BRB to explore its energy dissipation capacity. The cyclic behavior of the specimen models is evaluated. The validity of the numerical model is verified by comparing the predicted results with the experimental results. Next, the effects of three parameters on the mechanical properties of the brace—the width-thickness ratio of the inner core, the clearance between the inner core and the inner round steel tube c1, and the constraint ratio—are investigated by the validated numerical model. The width-thickness ratio varies from 6 to 20, the gap value ranges from 1 to 7 mm, and the constraint ratio ranges from 0.43 to 1.03. Results show that the hysteresis curves of the two braces are full, with stable hysteretic performance and good energy dissipation capacity, which justifies the construction. Based on the parameters analysis results, the optimum values of the width-thickness ratio, gap, and constraint ratio have been recommended for steel BRBs. [ABSTRACT FROM AUTHOR]