Search

Wood scrimber as a promising eco-friendly material in wood technology. This study evaluated the physical and mechanical properties of ginkgo scrimber, focusing on density, moisture content, water absorption, thickness swelling, flexural modulus of elasticity, bending strength, tensile modulus of elasticity, tensile strength, compressive modulus of elasticity, compressive strength, and shear strength. The results showed that the material had low variation in density and moisture content, indicating good homogeneity of the material. Mechanical properties tests showed that the material’s mechanical properties met high-quality standards, although variability in bending strength suggested potential issues with adhesive application. Some specimens experienced fractures perpendicular to adhesive layers, affecting strength. Despite this, ginkgo scrimber exhibited mechanical properties comparable to or exceeding those of reconstituted bamboo and laminated veneer lumber. The findings highlight its potential for construction, with recommendations for improved adhesive application and manufacturing processes to enhance performance stability.

Abstract The supercritical CO2 (sCO2) power cycle could improve efficiencies for a wide range of thermal power plants. The sCO2 turbine generator plays an important role in the sCO2 power cycle by directly converting thermal energy into mechanical work and electric power. The operation of the generator encounters challenges, including high temperature, high pressure, high rotational speed, and other engineering problems, such as leakage. Experimental studies of sCO2 turbines are insufficient because of the significant difficulties in turbine manufacturing and system construction. Unlike most experimental investigations that primarily focus on 100 kW‐ or MW‐scale power generation systems, we consider, for the first time, a small‐scale power generator using sCO2. A partial admission axial turbine was designed and manufactured with a rated rotational speed of 40,000 rpm, and a CO2 transcritical power cycle test loop was constructed to validate the performance of our manufactured generator. A resistant gas was proposed in the constructed turbine expander to solve the leakage issue. Both dynamic and steady performances were investigated. The results indicated that a peak electric power of 11.55 kW was achieved at 29,369 rpm. The maximum total efficiency of the turbo‐generator was 58.98%, which was affected by both the turbine rotational speed and pressure ratio, according to the proposed performance map.

Amid increasingly stringent global environmental regulations, marine engines are undergoing an essential transition from conventional fossil fuels to alternative fuels to meet escalating regulatory requirements. This study evaluates the effects of injection pressure, the timing of ammonia injection, and the pre-injection of ammonia on combustion and emissions, aiming to identify optimal operational parameters for low-speed marine engines. A three-dimensional model of a large-bore, low-speed marine engine in a high-pressure diffusion mode was developed based on computational fluid dynamics (CFD). Simulations were conducted under 25%, 50%, 75% and 100% loads with a high ammonia energy substitution rate of 95%. The results indicate that, compared to traditional pure diesel operation, adjusting the injection pressure and the ammonia injection timing, along with employing appropriate pre-injection strategies, significantly enhances in-cylinder pressure and temperature, improves thermal efficiency, and reduces specific fuel consumption. Additionally, the dual-fuel strategy using diesel and ammonia effectively reduces nitrogen oxide emissions by up to 37.5% and carbon dioxide emissions by 93.7%.

The Fuli Pb-Zn deposit is situated at the southwestern margin of the Yangtze Block in Yunnan. The deposit, which is hosted in the Permian Yangxin Formation dolomite, is a recent discovery. Our study indicates a significant presence of fluid inclusions in sphalerite from the Fuli Pb-Zn deposit, with fewer inclusions observed in dolomite and calcite. We conducted comprehensive petrographic, microthermometric, and laser Raman analyses on the inclusions within sphalerite and dolomite. Additionally, six samples of dolomite from the mineralization period were selected for H-O isotope analysis. The results of our study reveal the characteristics of ore-forming fluids and explore the mechanisms of ore formation. The study results indicate that the Fuli Pb-Zn deposit is a low- to medium-temperature hydrothermal deposit with fluid inclusions mainly composed of two-phase gas-liquid inclusions. Salinity and homogenization temperature analyses affirmed that there are two types of fluids present, one with low salinity and the other with high salinity. Laser Raman tests demonstrated the presence of CH4, N2, and CO2 in the gas phase of the inclusions. Microthermometric analyses indicated that the sphalerite ore-forming fluids consist of a multicomponent system of Mg2+ and Ca2+ enriched fluids. The features of the ore-forming fluids in the Fuli deposit arise from a blend of high-temperature, low-salinity metamorphic fluids and low-temperature, high-salinity basin brines. The basin brines in question have the potential to emanate from the Youjiang Basin. The formation of the ore is ascribed to the TSR and the mixing of fluids. The combination of these processes provided the requisite materials (SO42−), catalysts (Mg2+), and reducing agents (organic matter, CH4, and H2S) required to initiate the thermochemical sulfate reduction (TSR). As the TSR proceeded, it caused a shift in the pH of the fluids, thus promoting the precipitation of metal sulfides.

Wood is a non-homogeneous and orthotropic natural polymer material. It is important to test the wood shear modulus and elastic constants accurately and reliably using dynamic methods. Based on the introduction of the advantages of six common methods for dynamic testing of wood shear modulus, such as free plate torsional mode method, free bar torsional vibration method, and Timoshenko beam iterative method, issues associated with the applicability and accuracy of these methods are also pointed out. Recent methods, such as the free square plate torsional mode method and the square plate static torsional strain method, that were developed to dynamically test the shear modulus of wood and wood composite materials, are presented as effective ways to tackle these issues. These new approaches are expected to provide beneficial technical support for using small specimens, overcoming the size effect of specimens, simplifying the testing procedures, improving the test accuracy, and expanding the application range in the dynamic testing of wood shear modulus. These approaches have practical significance in promoting the industrialization and development of structural engineering, furniture and interior decoration, transportation, military, and musical instrument industries.

To compare the effects of different thermal boundary models on the output performance of a thermoelectric generator, this study used COSMOL software to analyze the influence of different thermal boundary models on output power. Considering maximuming power density, the effects of thermal boundary models on PN(P and N type semiconductor) pair structure optimization were also calculated. In addition, for each model, the output power using a constant physical property and variable physical property was also compared. The results showed that it is not recommended to consider the thermal isolation boundary between PN pairs. Moreover, different models had the same optimal scale regardless of the hot side temperature of the thermoelectric module at the range of fixed lengths. When the temperature of the hot end was below 250 °C, the variable physical property of thermoelectric materials could be replaced by a constant physical property case to simplify the model and exhibit power calculation accuracy.

Wood is easily affected by decay fungi, mildew fungi, insects, water, UV, and other factors when used outdoors. In particular, mildew on the surface of wood negatively affects the appearance and practical use of wood or wood-based engineered products. In recent years, as a class of popular crystalline materials, metal–organic frameworks (MOFs) have been widely applied in electrochemistry, adsorption, anti-mildew efforts, and other areas. In this study, we first grew a Co-based metal–organic framework (Co-MOF) in situ on a wood surface and subsequently converted the Co-MOF in situ into a cobalt–nickel double hydroxide layer, which formed micro- and nanohierarchical composite structures on the wood surface. The low surface energy of the CoNi-DH@wood was further modified via impregnation with sodium laurate to obtain the superhydrophobic wood (CoNi-DH-La@wood). We characterized the microstructure, chemical composition, water contact angle, and anti-mold properties of the CoNi-DH-La@wood using SEM, XRD, XPS, water contact angle tests, and anti-fungal tests. The SEM, XRD, and XPS results confirmed that the metal–organic framework was coated on the wood surface, with the long-chain sodium laurate grafted onto it. The CoNi-DH-La@wood had a water contact angle of 151°, demonstrating excellent self-cleaning ability. In addition, the fabricated superhydrophobic balsa wood exhibited excellent chemical and environment stability. Lastly, the CoNi-DH-La@wood exhibited excellent anti-mildew properties in a 30-day anti-mildew test because the superhydrophobic coating was successfully coated on the wood surface. In summary, this work presents an attractive strategy for obtaining wood with superhydrophobic properties at room temperature, thereby endowing the wood or wood-based engineered products with excellent anti-mildew properties.

The Fuli Pb-Zn deposit in Yunnan is located in the southeast of the Sichuan-Yunnan-Guizhou (SYG) Pb-Zn metallogenic province in South China. Lead and zinc reserves total approximately 0.3 million tons with an average grade of 18.68% Pb+Zn. The stratiform ore occurs in the interlayer fracture zone of the middle Permian Yangxin formation dolomite. The main sulfides of the Fuli Pb-Zn deposit consist of sphalerite, galena, and pyrite, while dolomite and calcite are the main gangue minerals. Mineralization exhibits massive, disseminated, vein and breccia textures. Sphalerites of two colors (black and red) have been identified in the Fuli deposit. LA-ICP-MS analysis revealed that the black and red sphalerites were enriched in Cd, Cu, Ga, and Ge and depleted in Fe, Mn, and In to varying degrees. The aforementioned elements exhibit homogeneous patterns in the LA-ICPMS time resolution profiles, which is consistent with variations in the concentrations of major elements like Zn and S. This indicates that these elements may occur in sphalerite as a result of isomorphous substitution. However, elements such as As, Sb, Pb, and Ag fluctuate greatly in the LA-ICPMS time resolution profiles, suggesting that these elements may exist as fine inclusions. Thus, the different colors of the Fuli sphalerite may be attributed to various elements such as Ni, Cu, and Ga; Ni and Cu result in purple Sp, Cu renders sphalerite red, and Ga imparts a yellow color. The sulfur isotope compositions of the two sphalerites exhibit little variation, with δ34S values ranging from 15.57‰ to 16.91‰, indicating the enrichment of 34S. These results are consistent with the sulfur isotopic compositions of Permian marine sulfates, indicating that thermochemical sulfate reduction was the main source of the reduced sulfur in the hydrothermal fluids. In situ Pb isotopic composition analysis revealed 208Pb/204Pb, 207Pb/204Pb, and 206Pb/204Pb values for galena in the range of 38.5–38.651, 15.666–15.733, and 18.539–19.124, respectively. The in situ Pb isotopic ratios of most galenas plot on the field of the basement metamorphic rocks of the Kunyang Group. These in situ Pb isotopic signatures reveal that the metallogenic metals are mainly derived from crustal basement. The findings of this study suggest that the Fuli Pb-Zn deposit is a MVT Pb-Zn deposit controlled by the interlayer compressional structure with characteristics of carbonate-hosted, epigenetic, simple mineral symbiosis, high Pb-Zn grade, and abundant Cd, Ga, and Ge along with other dispersed elements.

Abstract Background Our recently reported doubled haploid (DH) induction lines e.g., Y3380 and Y3560 are allo-octoploid (AAAACCCC, 2n = 8× ≈ 76), which can induce the maternal parent to produce DH individuals. Whether this induction process is related to the production of aneuploid gametes form male parent and genetic characteristics of the male parent has not been reported yet. Results Somatic chromosome counts of DH inducer parents, female wax-less parent (W1A) and their F1 hybrid individuals revealed the reliability of flow cytometry analysis. Y3560 has normal chromosome behavior in metaphase I and anaphase I, but chromosome division was not synchronized in the tetrad period. Individual phenotypic identification and flow cytometric fluorescence measurement of F1 individual and parents revealed that DH individuals can be distinguished on the basis of waxiness trait. The results of phenotypic identification and flow cytometry can identify the homozygotes or heterozygotes of F1 generation individuals. The data of SNP genotyping coupled with phenotypic waxiness trait revealed that the genetic distance between W1A and F1 homozygotes were smaller as compared to their heterozygotes. It was found that compared with allo-octoploids, aneuploidy from allo-octoploid segregation did not significantly increase the DH induction rate, but reduced male infiltration rate and heterozygous site rate of induced F1 generation. The ploidy, SNP genotyping and flow cytometry results cumulatively shows that DH induction is attributed to the key genes regulation from the parents of Y3560 and Y3380, which significantly increase the induction efficiency as compared to ploidy. Conclusion Based on our findings, we hypothesize that genetic characteristics and aneuploidy play an important role in the induction of DH individuals in Brassca napus, and the induction process has been explored. It provides an important insight for us to locate and clone the genes that regulate the inducibility in the later stage.

When homozygously fertile plants were induced using doubled haploid (DH) induction lines Y3380 and Y3560, the morphology of the induced F1 generation was basically consistent with the female parent, but the fertility was separated, showing characteristics similar to cytoplasmic male sterile (CMS) and maintainer lines. In this study, the morphology, fertility, ploidy, and cytoplasm genotype of the induced progeny were identified, and the results showed that the sterile progeny was polima cytoplasm sterile (pol CMS) and the fertile progeny was nap cytoplasm. The molecular marker and test-cross experimental results showed that the fertile progeny did not carry the restorer gene of pol CMS and the genetic distance between the female parent and the offspring was 0.002. This suggested that those inductions which produced sterile and fertile progeny were coordinated to CMS and maintainer lines. Through the co-linearity analysis of the mitochondrial DNA (mtDNA), it was found that the rearrangement of mtDNA by DH induction was the key factor that caused the transformation of fertility (nap) into sterility (pol). Also, when heterozygous females were induced with DH induction lines, the induction F2 generation also showed the segregation of fertile and sterile lines, and the genetic distance between sterile and fertile lines was approximately 0.075. Therefore, the induction line can induce different types of female parents, and the breeding of the sterile line and the maintainer line can be achieved through the rapid synchronization of sister crosses and self-crosses. The induction of DH inducer in B. napus can provide a new model for the innovation of germplasm resources and open up a new way for its application.

Abstract Moso bamboo (Phyllostachys heterocycla (Carr.) Mitford cv. Pubescens) was subjected to heat treatment with saturated steam at 140, 160, and 180 °C for 10–30 min to evaluate the effects of the treatment on the properties of bamboo. The changes in the physical, mechanical, and chemical properties as well as microscopic structures of moso bamboo were analyzed in this study. Results indicated that its equilibrium moisture content (EMC) decreased gradually after being treated by high-temperature saturated steam mostly due to the hemicelluloses’ degradation. Both the temperature and duration of treatment affect the mechanical properties of bamboo. The modulus of elasticity (MOE) of bamboo was prone to be affected by heat treatment with saturated steam as compared to the modulus of rupture (MOR). The MOR and MOE increased as compared to the control when the sample was treated at 140 °C. However, a severe treatment negatively affects the mechanical properties of bamboo. The MOR and MOE decreased by 47% and 20% as compared to the control when the sample was heated at 180 °C for 30 min.

The primary objective of the present study was to investigate the impact of wall film on the combustion characteristics of premixed flames in internal combustion engines through the joint experimental and numerical techniques. The interaction between the premixed methane-air flame and n-dodecane film attached to the wall of a constant volume combustion bomb was experimentally examined. The flame propagation processes, as well as pressure evolution were quantitatively characterized. Then, computational fluid dynamic (CFD) simulation was performed incorporating the combustion chemistry model. To enable efficient simulation of the chemically reacting flow in engine chambers, a simplified modeling approach based on a two-step reaction scheme was developed. A compact reaction model for the selected model fuel n-dodecane was constructed and reduced to include 35 chemical species and 180 reactions. The flame propagation process of the premixed flame and its interaction with dry and wet walls was studied. The results showed that the propagation of the premixed flame could be divided into four stages, and the existence of the slit structure increased the instability of the flame structure in the near-wall region. The wall film tended to promote emissions, producing more unburned hydrocarbons, soot precursors and aldehydes.

By promoting greenhouse gas sequestration, bamboo and bamboo-based products can improve carbon storage, and thus help decrease greenhouses gas emission through replacing traditional products like concrete, steel, and alloy. Thermal modification is a useful way to effectively enhance the dimensional stability and mold-resistance property of bamboo and bamboo-based products compared with chemical treatment. This work investigates the change in anti-mildew properties, micro-structure, and chemical composition of bamboo after heat treatment. Saturated steam heat treatment was applied for this project. SEM results showed that the structural damage of parenchyma cells resulted in the separation of thin-walled cells and vascular bundles. Thus, the original regular structure of bamboo, characterized by plump and intact cells, changed markedly. After thermal modification, bamboo samples exhibited improved dimensional stability and anti-fungal properties due to the decrement of hemicellulose and cellulose. The hardness and MOE of the modified bamboo were 0.75 and 20.6 GPa, respectively.

This paper studies the generation process and emission characteristics of soot from Marine diesel engine. On the basis of Particulate size mimic (PSM) detailed soot model, the parameters related to soot generation obtained from the reaction mechanism calculation of 3 surrogate of different carbon chain length: n-heptane, n-tetradecane and n-tetradecane-toluene were compared and analyzed including precursor of soot, quality and density of soot, particle size distribution of empirical soot model. The results show that the soot nucleation stage of n-tetradecane-toluene mechanism was slightly more consistent than that of n-tetradecane mechanism with the experimental results, far more consistent than that of n-heptane mechanism. The intensity of surface growth and aggregation stage is greater, which is reflected in the soot precursor: acetylene and A4, and leads to that the soot produced by the mechanism of n-tetradecane and n-tetradecane-toluene is small in quality but large in quantity. The particle size distribution calculated by n-tetradecane and n-tetradecane-toluene mechanism is closer to the experimental data than that calculated by n-heptane mechanism. Then combustion process of n-tetradecane and n-tetradecane-toluene mechanism is more suitable for marine engine, which is reflected in the higher temperature and the smaller equivalent ratio in the cylinder.

Mississippi Valley-Type (MVT) deposits are among the main types of Pb-Zn deposits that feature carbonate minerals as the main gangue minerals; their formation runs through the entire metallogenic process of MVT deposits. Therefore, carbonate minerals contain rich information on metallogenic fluid evolution and are thus important prospecting indicators. The Fuli Pb-Zn deposit in eastern Yunnan is located in the southeast of the Sichuan-Yunnan-Guizhou (SYG) Pb-Zn metallogenic province, which is the biggest producer of zinc and lead in China and contains more than 400 deposits and over 20 million tons of Pb + Zn reserves. The ore occurs in the interlayer fracture zone of Middle Permian Yangxin Formation Dolomite, and the orebody shape is generally stratiform. The main metal-bearing minerals of this deposit are sphalerite, galena, and pyrite; the gangue minerals mainly comprise dolomite and calcite. Three mineralized stages are observed (the early metallogenic period, the main metallogenic period, and the late metallogenic period) according to the characteristics of stratigraphic output, the intercalated contact relationship of gangue minerals, and the alteration characteristics of the wall rock. To determine the source and properties of the ore-forming fluid and the ore-forming process of the Fuli Pb-Zn deposit, different stages of mineralogy and trace element geochemical characteristics of hydrothermal dolomite were systematically studied. The minerals were observed under microscope and subjected to in situ analysis by LA-ICP-MS and C–O isotope test. The δ18OSMOW value of the dolomite in the metallogenic period was between 13.29‰ and 20.55‰, and the δ13CPDB value was between −4.13‰ and 3.5‰. Dolomite of the metallogenic period mainly came from the dissolution of carbonate wall rocks, while C in the ore-forming fluid came from the wall rocks. A few dolomites showed a trend of depleting δ13CPDB and δ18OSMOW at the same time, implying the influence of sedimentary rock contamination in the mantle multiphase system. The lower δ18O was due to the exchange of O isotopes between the wall rocks and the depleted δ18O in ore-forming fluids. From the early to the later stage of mineralization, the ore-forming fluid changed from alkaline to neutral to weakly acidic due to a decrease in the oxygen fugacity and temperature of the fluid; this change resulted in the precipitation of sulfide and dolomite in the deposit. From the early to the late stages of mineralization, Fe and Mn showed a downward trend. Fe and Mn entered the alkaline environment of the carbonate minerals, while Fe and Mn were released into the acidic fluid, indicating that due to the metasomatism from strong to weak, their metallogenic environment evolved from alkaline to acidic. From the early to the late stage of mineralization, Sr showed an upward trend, which might indicate that the continuous reaction between the hydrothermal fluid and the wall rock continuously released Sr into the fluid. The Fe-Sr and Mn-Sr diagrams show that two kinds of fluid mixing occurred in the ore-forming process. The Fuli Pb-Zn deposit may have formed from mineral precipitation caused by the mixing of the metal-rich, oxidized acidic fluid and the sulfur-rich, reduced alkaline fluid. The results show that the Fuli Pb-Zn deposit belongs to MVT deposits.

Bamboo is one of the most promising biomass materials in the world. However, the poor anti-mildew property and poor dimensional stability limits its outdoor applications. Current scholars focus on the modification of bamboo through heat treatment. Arc-shaped bamboo sheets are new bamboo products for special decoration in daily life. In this paper, we reported pressure-steam heat treatment and explored the effect of pressure-steam on the micro-structure, crystallinity index, anti-mildew, chemical composition, physical properties, and mechanical properties of bamboo via X-ray diffractometer (XRD), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR), wet chemistry method and nanoindentation (NI). Herein, saturated-steam heat treatment was applied for modified moso bamboo for enhancing the anti-mildew properties and mechanical properties of moso bamboo. Results showed that with the introduction of saturated steam, the content of hemicellulose and cellulose decreased, while the lignin-relative content increased significantly. The anti-mildew property of moso bamboo was enhanced due to the decomposition of polysaccharide. Last, the modulus of elasticity and hardness of treated moso bamboo cell walls were enhanced after saturated-steam heat treatment. For example, the MOE of the treated moso bamboo cell wall increased from 12.7 GPa to 15.7 GPa. This heat treatment strategy can enhance the anti-mildew property of moso bamboo and can gain more attention from entrepreneurs and scholars.

Accurate measurement of soil infiltration lines is very important for agricultural irrigation systems. It can help monitor the irrigation of soil to control irrigation amounts and promote crop growth. The soil infiltration line is a complex dynamic boundary and is difficult to model accurately, leading to estimation deviation. A traditional TDR (time domain reflectometry) method is used in soil infiltration line measurement, but it lacks good applicability and accuracy. In this paper, we proposed a method—VFTT (The vector network analyzer’s frequency domain signals are converted to the time domain)—by the time domain to frequency domain conversion principle to improve the accuracy of soil infiltration line measurement. The experiment results show that the measurement method of soil infiltration line based on VFTT has high accuracy and robustness. After fitting the measured value with the actual one, R2 reaching more than 0.98 can effectively measure the position of the soil infiltration line.

Low-speed two-stroke marine diesel engines dominate the modern global long-distance transportation market; with the increasingly stringent regulations, the combustion and emissions of these engines is gaining intense interest. The primary objective of the present study was to understand the effects of air-fuel mixing by pilot injection strategy on the combustion and emission characteristics of the marine diesel engines through a numerical study. Specifically, a computational fluid dynamic (CFD) model was established and validated by experimental data for a typical low-speed two-stroke marine diesel engine. The combustion parameters under different stages were analyzed, including mean in-cylinder temperature and pressure, indicated thermal efficiency (ITE), indicated specific fuel consumption (ISFC), and distribution of fuel-air mixture. Results indicated that, due to the premixing effect, the pilot injection produced unburned soot from the main injection’s ignition as well as decrease the intervals between the middle and final stages of combustion, thus raising the in-cylinder temperature. The interaction between the reduction of soot particles resulted from the increased temperature, and the decrease of the stage intervals led to lower overall boundary heat loss, which improved the effective thermal efficiency. The pilot injection timing and quality, respectively, showed quadratic and linear impact modes on engine performance and emissions.

The mechanical properties of poplar scrimber reinforced with glass fiber mesh were investigated. The influence of the different structures and densities were studied with respect to the modulus of rupture (MOR), modulus of elasticity (MOE), and impact toughness (IT). The glass fiber improved the mechanical properties of poplar scrimber. The MOR, MOE, and IT of the scrimber had an obvious dependence on the number of glass fiber layers. When the layers of glass fiber meshes were increased, the MOR, MOE, and IT were increased compared to the control group (scrimber without glass fiber reinforcement). The MOR, MOE, and IT of single-layer glass fiber reinforced scrimber increased a lot compared to the control group. The MOR, MOE, and IT of double-layer glass fiber reinforced scrimber (DGRS) were increased, but the amplitude of the increase was smaller than that of SGRS. Compared to the MOR, MOE, and IT of DGRS, the MOR, MOE, and IT of triple-layer glass fiber reinforced scrimber (TGRS) decreased slightly. When the density was increased, the increasing rate of the MOR, MOE, and IT of the glass fiber reinforced scrimber showed a downward trend, and the glass fiber had better strengthen effects on the scrimber at low density (0.6 g/cm3 and 0.7 g/cm3).

Due to the increasing awareness of environmental protection, limitations on exhaust emissions of diesel engines have become increasingly stringent. This challenges diesel engine manufacturers to find a new balance between engine performance and emissions. Advanced combustion modes for diesel engines, such as homogeneous charge compression ignition (HCCI) and premixed charge compression ignition (PCCI), which can simultaneously reduce exhaust emissions and substantially improve thermal efficiency, have drawn increasing attention. In order to allow enough time to prepare the homogeneous mixture, the early injection strategy has been utilized widely in HCCI and PCCI diesel engines. This paper is aimed at providing a comprehensive review of the effects of early injection parameters on the performance and emissions of HCCI and PCCI engines fueled by both diesel and alternative fuels. Various early injection parameters, including injection pressure, injection timing, and injection angle, are discussed. In addition, the effect of the blending ratio of alternative fuels is also summarized. Every change in parameters has its own advantages and disadvantages, which are explained in detail in order to help researchers choose the best early injection parameters for HCCI and PCCI engines.

The effect of wall roughness with different lubricant film thicknesses on the characteristics of adhered fuel films of diesel-n-butanol blending fuels after spray impingement has been investigated. Four steel plates with different types of roughness (root mean square height-Sq) that were coated with different lubricant film thicknesses (hl) were used as impinged walls. The experimental conditions included dry walls (hl = 0), semi-wetted walls (SWW) with different thin oil films (0 < hl/Sq < 1), and fully wetted walls (FWW) with a thick lubricant film (hl > Sq). The results indicate that the adhered fuel mass ratio (ε) of blended fuel with 25% n-butanol (B25) was higher than that of blended fuel with 15% n-butanol (B15) under the same conditions. ε increased with an increase in Sq on the dry walls, but, under SWW conditions, it decreased with an increase in oil film thickness. The fuel film morphology was almost unaffected by the change in Sq, but the results implied that the roughness parameter-Skewness (Ssk) exerted a greater impact. The mean thickness ha and accumulated diameter Dl of the adhered fuel film increased with an increase in hl, but, under FWW conditions, the effect of the roughness on the adhered film’s features was insignificant.

In order to study the characteristics of diesel spray impinging in small-size internal combustion (IC) engine, the laboratorial platform of spray impingement is used to visualize the droplet impact phenomenon. A high-speed camera is used to record the whole process of the spray. An experimental research is accomplished under the impingement phenomenon of diesel spray on the wall with a fixed injection volume of 25 mg, injection pressure of 40 MPa, wall-injector distance of 40mm and orifice diameter of 0.26 mm. The computational fluid dynamics (CFD) simulation is carried out and the turbulence kinetic energy (TKE) distribution diagram is obtained. The results show that the maximum spray radius is 29.3 mm and maximum spray height is 10.2 mm at 2.8 ms. The spray impingement phenomenon presents the “blanket” shape. The simulation results are similar to the experimental results with the average error of the spray height within 3%.

The effect of lubricating oil on the morphology of particulate matter (PM) was studied in a diesel engine fueled with pure diesel fuel and blended fuel containing 0.5% by weight of lubricating oil. Particulate matter emitted by diesel engines is formed primarily by soot agglomerates which are composed of primary particles. In this paper, particulate matter was collected with a thermophoretic sampling system, and a high-resolution transmission electron microscope (TEM) was used to investigate the primary particles. A Fast Particulate Spectrometer, DMS 500, was used to determine the particle size distributions. The TEM results indicated that the mean diameters of the primary particles increased after the oil was added into the fuel. Particle size distributions results showed that lubricating oil in the fuel gave rise to a higher concentration in nucleation mode.

Dimethyl ether (DME)/diesel blended fuels are used to improve the emissions caused by spray wall impingement during the early injection period. However, experimental results have showed that the spray wall impingement still cannot be avoided due to the engine structure and low density of the in-cylinder charge at the early injection timing. Furthermore, the wall film formed in the spray wall impingement process directly affects fuel/air mixture formation, combustion, exhaust emissions and oil quality subsequently. In this paper, the wall film distribution of DME/diesel blended fuels formed during the spray wall impingement process has been experimentally investigated. The variations of wall film distribution, wall film area and average thickness with different injection pressures, impingement distances, impingement angles and blending ratios have been discussed under both dry wall and wet wall conditions. Results showed that the wall film distribution styles were mainly determined by the spray impingement momentum. The variation of the wall film area and average thickness were affected by three factors including the impingement momentum, wall film mass and fuel properties. Correlation analysis was introduced in order to evaluate the effect of each impact factor on the variation of wall film area and average thickness.