Search

Accurate crop mapping provides important information for government decision-making and agricultural management. Recent advancements in deep learning have significantly enhanced the capabilities of remote sensing-based crop mapping. In this study, we developed a new deep learning approach, DSH, which comprises three modules, DeepLabV3+ (D), channel self-attention (S), and histogram matching (H). The DeepLabV3+ module learns the spatial distribution of crops in the spatial and spectral dimensions. The channel self-attention module was used to enhance the weights of the important features. The histogram-matching module addresses the domain gap between the training and testing images and enhances the transferability of the DSH. In addition, the input data of the DSH are monthly synthesized Sentinel-2 data, thus relaxing the data collection requirements. The performance of the DSH was evaluated and benchmarked against HRNetV2, DeepLabV3+, and random forest (RF) at eight sites in the U.S. China, and France with different farming structures, climate conditions, and landscape complexities. Temporal transfer revealed that the classification performance of DSH improved as the growth season progressed, peaked in the peak growth season (August), and then declined at each study site. The DSH model trained during the peak growth season demonstrated superior temporal transferability. Spatial transfer experiments demonstrated that transferring DSH to sites with similar planting structures achieved higher precision than full spatial transfers. Spatiotemporal transfer experiments conducted at eight sites over three years (2020–2022) demonstrated an average overall accuracy (OA) of 88.1% for DSH, highlighting the importance of similar planting structures for effective spatiotemporal transfer. DSH outperformed HRNetV2, DeepLabV3+, and RF in OA, producer’s accuracy, and user’s accuracy at all eight study sites. Notably, DSH exhibited comparable performance during both the peak and full growth seasons, with an average OA of 93.9%. The classification accuracy of test images after histogram matching remained stable from 2020 to 2022, whereas the accuracy of raw test images fluctuated annually. This indicates that histogram matching is effective in improving the transferability of DSH. Embedding the channel self-attention module into the position of the high-level features had a more significant impact on improving DSH’s performance than other configurations. Visualizing features from the channel self-attention and high-level layers revealed that integrating the channel self-attention module with DeepLabV3+‘s high-level features significantly improved crop mapping by enhancing relevant semantic information. Overall, DSH exhibits robust spatiotemporal generalizability and requires minimal input data, making it suitable for large-scale crop mapping.

Accurate cropland distribution data are essential for efficiently planning production layouts, optimizing farmland use, and improving crop planting efficiency and yield. Although reliable cropland data are crucial for supporting modern regional agricultural monitoring and management, cropland data extracted directly from existing global land use/cover products present uncertainties in local regions. This study evaluated the area consistency, spatial pattern overlap, and positional accuracy of cropland distribution data from six high-resolution land use/cover products from approximately 2020 in the alpine agricultural regions of the Hehuang Valley and middle basin of the Yarlung Zangbo River (YZR) and its tributaries (Lhasa and Nianchu Rivers) area on the Qinghai-Tibet Plateau. The results indicated that (1) in terms of area consistency analysis, European Space Agency (ESA) WorldCover cropland distribution data exhibited the best performance among the 10 m resolution products, while GlobeLand30 cropland distribution data performed the best among the 30 m resolution products, despite a significant overestimation of the cropland area. (2) In terms of spatial pattern overlap analysis, AI Earth 10-Meter Land Cover Classification Dataset (AIEC) cropland distribution data performed the best among the 10 m resolution products, followed closely by ESA WorldCover, while the China Land Cover Dataset (CLCD) performed the best for the Hehuang Valley and GlobeLand30 performed the best for the YZR area among the 30 m resolution products. (3) In terms of positional accuracy analysis, the ESA WorldCover cropland distribution data performed the best among the 10 m resolution products, while GlobeLand30 data performed the best among the 30 m resolution products. Considering the area consistency, spatial pattern overlap, and positional accuracy, GlobeLand30 and ESA WorldCover cropland distribution data performed best at 30 m and 10 m resolutions, respectively. These findings provide a valuable reference for selecting cropland products and can promote refined cropland mapping of the Hehuang Valley and YZR area.

AbstractAs an alpine area, surface fires significantly affect the fragile ecosystems of the Qinghai-Tibetan Plateau (QTP). However, no studies on the accuracy of any remote sensing burned area (BA) products on the QTP has not been evaluated, resulting in higher uncertainties in BA mapping. To address this, we used 56-view medium-resolution Landsat images of the QTP from 2001 to 2020 to verify the MCD64A1 and FireCCI51 products by stratified sampling. The results showed that MCD64A1 was more accurate than FireCCI51 for identifying small-scale (5 km2) BAs. Additionally, MCD64A1 was more accurate than FireCCI51 for identifying BAs in forests, FireCCI51 was more accurate than MCD64A1 for identifying BAs in grasslands, shrublands, and wetlands. These results can aid fire risk assessment in the region to improve ecosystem stewardship and inform further improvements in BA products.

As a natural disaster prone to occur in mountainous areas, geological hazards cause serious economic losses to China every year. In order to reveal the factors influencing of geological hazards susceptibility in typical mountain valley, this paper takes Changdu City as the study area.Firstly, we analyze the spatial distribution of geological hazards, and then divides it into three major watersheds based on the differences of disaster-inducing environments in the study area, selects 10 indicators such as elevation, slope and terrain relief to build a evaluation index system of geological hazard susceptibility , and the weights of index determined based on the Random Forest. The spatial distribution of geological hazards in each watershed of Changdu City is obtained by overlaying with GIS, and it is found that: (1) The types of geological hazards in Changdu City are mainly small disasters, while the distribution of large disasters is relatively small but the hazards are huge and the danger level is high. (2) In general, the factors influencing geological hazards are more or less the same in each basin, but there are still some differences, with the factor of medium altitude and road being more prominent in the Jinsha River basin, the factor of density of settlements being more prominent in the Lancang River basin, and the factor of road being more prominent in the Nujiang River basin.(3) The Jinsha River basin has the largest area of low susceptibility, and the Lancang and Nujiang River basins have the largest area of medium susceptibility; all three basins have the smallest area of high susceptibility, but they are distributed in the whole basin, and mainly in areas with strong human activities and soft lithology.

Many countries and regions are currently developing new forest strategies to better address the challenges facing forest ecosystems. Timely and accurate monitoring of deforestation events is necessary to guide tropical forest management activities. Synthetic aperture radar (SAR) is less susceptible to weather conditions and plays an important role in high-frequency monitoring in cloudy regions. Currently, most SAR image-based deforestation identification uses manually supervised methods, which rely on high quality and sufficient samples. In this study, we aim to explore radar features that are sensitive to deforestation, focusing on developing a method (named 3DC) to automatically extract deforestation events using radar multidimensional features. First, we analyzed the effectiveness of radar backscatter intensity (BI), vegetation index (VI), and polarization feature (PF) in distinguishing deforestation areas from the background environment. Second, we selected the best-performing radar features to construct a multidimensional feature space model and used an unsupervised K-mean clustering method to identify deforestation areas. Finally, qualitative and quantitative methods were used to validate the performance of the proposed method. The results in Paraguay, Brazil, and Mexico showed that (1) the overall accuracy (OA) and F1 score (F1) of 3DC were 88.1–98.3% and 90.2–98.5%, respectively. (2) 3DC achieved similar accuracy to supervised methods without the need for samples. (3) 3DC matched well with Global Forest Change (GFC) maps and provided more detailed spatial information. Furthermore, we applied the 3DC to deforestation mapping in Paraguay and found that deforestation events occurred mainly in the second half of the year. To conclude, 3DC is a simple and efficient method for monitoring tropical deforestation events, which is expected to serve the restoration of forests after deforestation. This study is also valuable for the development and implementation of forest management policies in the tropics.

It is important to develop or validate remote sensing methods to explore agricultural management and food self-sufficiency in the agricultural areas of the Qinghai–Tibet Plateau under the influence of global change, ecological protection, and socio-economic development. Studies on the use of remote sensing to monitor crop planting on the Qinghai-Tibetan Plateau are limited, with inconclusive results. Therefore, in this study, we analyzed Sentinel-2A/B images and field survey data in Hualong, China (located in Hehuang Valley, Qinghai-Tibetan Plateau) for winter wheat identification and verification at different spatial scales based on the time series of the normalized difference phenology index (NDPI) and dynamic time warping (DTW) algorithm. The characteristic phenological period and the corresponding DTW threshold were optimized using remote sensing data extracted for winter wheat. The results showed that NDPI corresponding to the jointing-heading stage, grouting-harvesting stage, and jointing-harvesting stage with DTW could identify winter wheat regardless of whether the spatial scale was a single quadrat, a combination of two quadrats, or the entire study area. The NDPI corresponding to the jointing-heading stage (corresponding DTW threshold T = 0.158) could generate a relatively rational winter wheat map; the NDPI corresponding to the time series of the grouting-harvesting stage (combined with DTW threshold T = 0.195) could detect a planting area with relatively high accuracy when supported by cultivated land, which matches the statistical reporting of the winter wheat area data. Similarly, with the support of cultivated land data, the planted area could be identified early based on the phenological characteristics of winter wheat before overwintering; however, the extraction scheme needs to be optimized further.

The northeastern margin of the Qinghai–Tibet Plateau (QTP) is an agricultural protection area in China’s new development plan, and the primary region of winter wheat growth within QTP. Winter wheat monitoring is critical for understanding grain self-sufficiency, climate change, and sustainable socioeconomic and ecological development in the region. However, due to the complex terrain and high altitude of the region, with discontinuous arable land and the relatively low level of agricultural development, there are no effective localization methodologies for extracting and monitoring the detailed planting distribution information of winter wheat. In this study, Sentinel-2A/B data from 2019 to 2020, obtained through the Google Earth Engine platform, were used to build time series reference curves of vegetation indices in Minhe. Planting distribution information of winter wheat was extracted based on the phenology time-weighted dynamic time warping (PT-DTW) method, and the effects of different vegetation indices’ time series and their corresponding threshold parameters were compared. The results showed that: (1) the three vegetation indices—normalized difference vegetation index (NDVI), normalized differential phenology index (NDPI), and normalized difference greenness index (NDGI)—maintained high mapping potential; (2) under the optimal threshold, >88% accuracy of index identification for winter wheat extraction was achieved; (3) due to improved extraction accuracy and resulting boundary range, NDPI and its corresponding optimal parameter (T = 0.05) performed the best. The process and results of this study have certain reference value for the study of winter wheat planting information change and the formulation of dynamic monitoring schemes in agricultural areas of QTP.