Search

Marine pipeline vibration condition monitoring is a critical and challenging issue, on account of the complex marine environment, while powering the required monitoring sensors remains problematic. This study introduces a vibration sensor based on a ball triboelectric nanogenerator (B-TENG) for marine pipelines condition monitoring. The B-TENG consists of an acrylic cube, polyester rope, aluminum electrodes, and PTFE ball, which converts vibration signals into electrical signals without the need for an external energy supply. The experimental results show that B-TENG can accurately monitor the frequency, amplitude, and direction of vibration in the range of 1–5 Hz with a small error of 0.67%, 4.4%, and 5%, and an accuracy of 0.1 Hz, 0.97 V/mm, and 1.5°, respectively. The hermetically sealed B-TENG can monitor vibration in underwater environments. Therefore, the B-TENG can be used as a cost-effective, self-powered, highly accurate vibration sensor for marine pipeline monitoring.

With the advantages of superior wear resistance, mechanical durability, and stability, the liquid–solid triboelectric nanogenerator (LS-TENG) has been attracting much attention in the field of energy harvesting and self-powered sensors. However, most of the studies on LS-TENG focused on device innovations, changes in solid materials, and the effect of solid properties on output performance, and there is a lack of studies on liquids, especially at the molecular level. A U-tube LS-TENG was assembled to conduct experiments, whereby the effects of molecular structures, including molecular composition, carbon chain length, functional groups and material properties on the output performance were investigated. The deuterium replacing hydrogen and the atomic compositions could not achieve the enhancement of the output performance. Whether the chemical functional groups improve the output performance of LS-TENG depends on the mating solid material. Hydroxyl and cyanogenic groups can improve the output performance for the FEP case, while amide and cyanogenic groups can improve the output performance for the PTFE case. The order of output performances for functional groups of four groups of liquids with both FEP and PTFE materials is also obtained. It was also found that the dielectric constant is not positively correlated with the output performance. The results of this study might provide a reference for the deeper study and application of LS-TENG.

The gut microbiome is associated with hepatitis B virus (HBV)-induced liver disease, which progresses from chronic hepatitis B, to liver cirrhosis, and eventually to hepatocellular carcinoma. Studies have analyzed the gut microbiome at each stage of HBV-induced liver diseases, but a consensus has not been reached on the microbial signatures across these stages. Here, we conducted by a systematic meta-analysis of 486 fecal samples from publicly available 16S rRNA gene datasets across all disease stages, and validated the results by a gut microbiome characterization on an independent cohort of 15 controls, 23 chronic hepatitis B, 20 liver cirrhosis, and 22 hepatocellular carcinoma patients. The integrative analyses revealed 13 genera consistently altered at each of the disease stages both in public and validation datasets, suggesting highly robust microbiome signatures. Specifically, Colidextribacter and Monoglobus were enriched in healthy controls. An unclassified Lachnospiraceae genus was specifically elevated in chronic hepatitis B, whereas Bilophia was depleted. Prevotella and Oscillibacter were depleted in liver cirrhosis. And Coprococcus and Faecalibacterium were depleted in hepatocellular carcinoma. Classifiers established using these 13 genera showed diagnostic power across all disease stages in a cross-validation between public and validation datasets (AUC = 0.65–0.832). The identified microbial taxonomy serves as non-invasive biomarkers for monitoring the progression of HBV-induced liver disease, and may contribute to microbiome-based therapies.

Vibration measurement and analysis play an important role in diagnosing mechanical faults, but existing vibration sensors are limited by issues such as dependence on external power sources and high costs. To overcome these challenges, the use of triboelectric nanogenerator (TENG)−based vibration sensors has recently attracted attention. These vibration sensors measure a small range of vibration frequencies and are not suitable for measuring high-frequency vibrations. Herein, a self-powered vibration sensor based on an elastic steel triboelectric nanogenerator (ES−TENG) is proposed. By optimizing the elastic steel sheet structure and combining time-frequency transformation and filtering processing methods, the measurement of medium- and high-frequency vibrations is achieved. These results demonstrate that the ES−TENG can perform vibration measurements in the range of 2–10,000 Hz, with a small average error (~0.42%) between the measured frequency and external vibration frequency values. Therefore, the ES−TENG can be used as a self-powered, highly-accurate vibration sensor for intelligent machinery monitoring.

Harvesting wind energy from the ambient environment is a feasible method for powering wireless sensors and wireless transmission equipment. Triboelectric nanogenerators (TENGs) have proven to be a stable and promising technology for harvesting ambient wind energy. This study explores a new method for the performance enhancement and practical application of TENGs. An array of flag-type triboelectric nanogenerators (F-TENGs) for harvesting wind energy is proposed. An F-TENG consists of one piece of polytetrafluoroethylene (PTFE) membrane, which has two carbon-coated polyethylene terephthalate (PET) membranes on either side with their edges sealed. The PTFE was pre-ground to increase the initial charge on the surface and to enhance the effective contact area by improving the surface roughness, thus achieving a significant improvement in the output performance. The vertical and horizontal arrays of F-TENGs significantly improved the power output performance. The optimal power output performance was achieved when the vertical parallel distance was approximately 4D/15 (see the main text for the meaning of D), and the horizontal parallel distance was approximately 2D. We found that the peak output voltage and current of a single flag-type TENG of constant size were increased by 255% and 344%, respectively, reaching values of 64 V and 8 μA, respectively.