Search

This study examines the interface of biodegradable polylactic acid (PLA) fiber-reinforced thermoplastic starch composites to address market demand for their mechanical properties. We first used a combination of solution treatment (acid/alkali) and plasma modification to modify fibers. This method improves surface roughness and increases oxygen-containing groups of the fibers, which enhances the mechanical interlocking at the interface and promotes stronger hydrogen bonds between fibers and starch, respectively. Their synergy effect significantly strengthens interfacial adhesion and interfacial shear strength (IFSS). In contrast, cold plasma modification alone results in a smaller increase in IFSS because of its lower roughness and fewer oxygen-containing groups. Alkaline treatment and increased cold plasma power level are more conducive to higher IFSS through stronger synergistic effects. Although IFSS improved from 2.41 to 4.40 MPa after alkali and plasma treatments of 200 W, the tensile strength decreased from 811.46 to 351.55 MPa. To optimize the mechanical properties of composite materials, it is crucial to choose a kind of modification method that balances IFSS enhancement and tensile strength reduction.

Abstract Aims The endoscopic treatment of esophagogastric varices is challenging, and the nationwide application of endoscopic therapies for various types of esophagogastric varices and different clinical scenarios remains unclear. This study investigated the use of endoscopic therapy for portal hypertension in China. Methods This study used a questionnaire survey initiated by the Liver Health Consortium in China to investigate the use of endoscopic therapies for portal hypertension. Questionnaires were released online from January 30, 2023 to February 28, 2023 and filled out by chief physicians or senior instructors responsible for endoscopic therapies in participating hospitals across 31 provinces (autonomous regions and municipalities) in China. Comparisons of guideline adherence between primary and referral medical centers were performed using the chi‐square test or Fisher's exact test. Results In total, 836 hospitals participated in the survey. For primary and secondary prophylaxis of esophagogastric variceal bleeding (EGVB), adherence to the national guidelines was 72.5% (606/836) and 39.2% (328/836), respectively. Significant differences were observed in the rate of adherence between the primary and referral centers for primary (79.9% [111/139] vs. 71.0% [495/697], p = 0.033) and secondary prophylaxis (27.3% [38/139] vs. 41.6% [290/697], p = 0.002). Of the hospitals, 78.2% (654/836) preferred endoscopic therapies for acute EGVB, and the timing of endoscopy was usually within 12 h (48.5%, 317/654) and 12–24 h (36.9%, 241/654) after bleeding. Endoscopic therapy was more likely to be the first choice of treatment for acute EGVB in referral centers than in primary centers (82.6% [576/697] vs. 56.1% [78/139], p

Abstract To evaluate the changes of choroidal thickness (CT) and blood flow related to myopia, and its effects of vascular endothelial growth factor (VEGFA) on choroidal vessels in myopia. Subjects were included and divided into emmetropia (EM), non-high myopia (Non-HM) and high myopia (HM) groups. we measured choroidal thickness (CT), choriocapillaris vessel density (VD), and VEGFA content in tears in humans (137 subjects for CT, VD and 84 for tear) and detected the role of VEGFA in the choroid in form-deprivation myopia (FDM) in guinea pigs. Twenty-four guinea pigs were divided into control and FDM groups, and the expression changes of choroidal vessels and VEGFA were observed and compared using immunohistochemistry and Western blotting. Twenty-one guinea pigs were divided into control, FDM + Vehicle and FDM + Conbercept groups. The changes of diopter, axis length and choroidal vessels after intravitreal injection of Conbercept were observed. There were significant differences in CT and VD among the three groups (p

Abstract Background Early identification of children at high risk of developing myopia is essential to prevent myopia progression by introducing timely interventions. However, missing data and measurement error (ME) are common challenges in risk prediction modelling that can introduce bias in myopia prediction. Methods We explore four imputation methods to address missing data and ME: single imputation (SI), multiple imputation under missing at random (MI-MAR), multiple imputation with calibration procedure (MI-ME), and multiple imputation under missing not at random (MI-MNAR). We compare four machine-learning models (Decision Tree, Naive Bayes, Random Forest, and Xgboost) and three statistical models (logistic regression, stepwise logistic regression, and least absolute shrinkage and selection operator logistic regression) in myopia risk prediction. We apply these models to the Shanghai Jinshan Myopia Cohort Study and also conduct a simulation study to investigate the impact of missing mechanisms, the degree of ME, and the importance of predictors on model performance. Model performance is evaluated using the receiver operating characteristic curve (AUROC) and the area under the precision-recall curve (AUPRC). Results Our findings indicate that in scenarios with missing data and ME, using MI-ME in combination with logistic regression yields the best prediction results. In scenarios without ME, employing MI-MAR to handle missing data outperforms SI regardless of the missing mechanisms. When ME has a greater impact on prediction than missing data, the relative advantage of MI-MAR diminishes, and MI-ME becomes more superior. Furthermore, our results demonstrate that statistical models exhibit better prediction performance than machine-learning models. Conclusion MI-ME emerges as a reliable method for handling missing data and ME in important predictors for early-onset myopia risk prediction.

This study aims to explore the changes in the vitreous proteomics of form deprivation myopia (FDM) in guinea pigs, in order to reveal the molecular mechanisms involved in the onset and development of myopia. The myopia model in guinea pigs was successfully established by covering one eye of the guinea pigs with a latex bead sac for 4 weeks. This study used 4D data-independent acquisition proteomics technology to analyze vitreous body samples from both the FDM group and the control group. The goal of the proteomics analysis was to identify differences in protein expression within the vitreous body of FDM guinea pigs. Myopia was successfully induced in the FDM group after 4 weeks of modeling. A total of 6298 proteins were identified, among which 348 were differentially expressed proteins (DEPs), with 81 upregulated and 267 downregulated. These DEPs were subjected to in-depth bioinformatics analyses, including Gene Ontology, the Eukaryotic Orthologous Groups, and the Kyoto Encyclopedia of Genes and Genomes. These analyses revealed significant involvement in cellular processes, metabolic pathways, biological regulation, cytoskeletal organization, and cell movement. Our results indicate that calcium signaling plays a critical role in mediating eye changes associated with form deprivation, which may bear similarities to mechanisms observed in neurodegenerative diseases. A total of 348 DEPs related to the development and progression of myopia were identified. These changes involve key biological processes, including protein degradation, cell adhesion, and transport, especially alterations in calcium signaling pathways. Stromal interaction molecule 1 (STIM1) is an important biological marker of FDM, which was confirmed by Western blot, immunohistochemistry and ELISA. Our study found clear differences in the expression of proteins in the vitreous during the development of myopic guinea pigs, especially those related to calcium signaling pathway. Our study offers new insights into the pathogenesis of myopia, particularly changes related to protein metabolism pathways.

Abstract The annual increase in myopia prevalence poses a significant economic and health challenge. Our study investigated the effect of calcitriol role in myopia by inducing the condition in guinea pigs through form deprivation for four weeks. Untargeted metabolomics methods were used to analyze the differences in metabolites in the vitreous body, and the expression of vitamin D receptor (VDR) in the retina was detected. Following form deprivation, the guinea pigs received intraperitoneal injections of calcitriol at different concentrations. We assessed myopia progression using diopter measurements and biometric analysis after four weeks. Results indicated that form deprivation led to a pronounced shift towards myopia, characterized by reduced choroidal and scleral thickness, disorganized collagen fibers, and decreased scleral collagen fiber diameter. Notably, a reduction in calcitriol expression in vitreous body, diminished vitamin D and calcitriol levels in the blood, and decreased VDR protein expression in retinal tissues were observed in myopic guinea pigs. Calcitriol administration effectively slowed myopia progression, preserved choroidal and scleral thickness, and prevented the reduction of scleral collagen fiber diameter. Our findings highlight a significant decrease in calcitriol and VDR expressions in myopic guinea pigs and demonstrate that exogenous calcitriol supplementation can halt myopia development, enhancing choroidal and scleral thickness and scleral collagen fiber diameter.

Abstract Background The innovative closed management of universities may have influenced the physical and mental health of students during the fourth stage of the COVID-19 pandemic in China. The study aimed to assess the gastrointestinal and mental health status of students in this stage and to explore the possible risk factors and mechanisms to provide a reference for future school responses to similar stressful events. Method A multicenter, cross-sectional survey was administered to 598 college students from 10 Chinese universities. The study used the 7-item Generalized Anxiety Disorder Scale (GAD-7), 9-item Patient Health Questionnaire (PHQ-9), Fear of COVID-19 Scale (FCV-19 S), and the Diagnostic Tendency of Functional Bowel Disease Scale (DT-FBD) to evaluate anxiety, depression, fear of COVID-19 and likelihood of being diagnose diagnosed with functional bowel disease (FBD), respectively. Results A total of 516 college students completed the questionnaire. The proportions of students with more severe anxiety, more severe depression, greater fear of COVID-19, and a greater likelihood of being diagnosed with FBD were 49.8%, 57.0%, 49%, and 49%, respectively. These symptoms were significantly and positively correlated with the frequency of irregular sleep and eating (p

Abstract Artificial spin ice (ASI) consisting patterned array of nano-magnets with frustrated dipolar interactions offers an excellent platform to study frustrated physics using direct imaging methods. Moreover, ASI often hosts a large number of nearly degenerated and non-volatile spin states that can be used for multi-bit data storage and neuromorphic computing. The realization of the device potential of ASI, however, critically relies on the capability of transport characterization of ASI, which has not been demonstrated so far. Using a tri-axial ASI system as the model system, we demonstrate that transport measurements can be used to distinguish the different spin states of the ASI system. Specifically, by fabricating a tri-layer structure consisting a permalloy base layer, a Cu spacer layer and the tri-axial ASI layer, we clearly resolve different spin states in the tri-axial ASI system using lateral transport measurements. We have further demonstrated that the tri-axial ASI system has all necessary required properties for reservoir computing, including rich spin configurations to store input signals, nonlinear response to input signals, and fading memory effect. The successful transport characterization of ASI opens up the prospect for novel device applications of ASI in multi-bit data storage and neuromorphic computing.

A tunable LED panel with multiple types of LEDs on a panel can provide various spectra for optimal plant growth. However, it is difficult for a lighting panel with multiple types of high-power LEDs to achieve uniform lighting. We demonstrated that by using optical reflectors at the sides of an LED panel to trap photons of LED arrays or using both the above-mentioned reflectors and optical lenses on each LED, high lighting uniformity can be achieved at a short distance to plants. The ray tracing simulation results show that the LED panel equipped with reflectors and optical lenses can achieve a high uniformity of >0.80 when the LED-plant distance is at half of the LED array’s pitch. We further verified that an LED panel (at a size of 88 cm × 54 cm) installed with reflectors can achieve light uniformities around 0.90 at a 15 cm LED-plant distance for the 6 types of LEDs (4 color LEDs and 2 white LEDs) on the panel. Compared with a branded tunable LED panel, our LED panel saves >25 cm vertical distance for each tier of plants and has 92.5% higher photon efficacy for 660 nm LEDs that exist on both panels.

Electrochemical (EC) detection is a powerful tool supporting simple, low-cost, and rapid analysis. Although screen printing is commonly used to mass fabricate disposable EC chips, its mask is relatively expensive. In this research, we demonstrated a method for fabricating three-electrode EC chips using 3D printing of relatively high-viscosity paste. The electrodes consisted of two layers, with carbon paste printed over silver/silver chloride paste, and the printed EC chips were baked at 70 °C for 1 h. Engineering challenges such as bulging of the tubing, clogging of the nozzle, dripping, and local accumulation of paste were solved by material selection for the tube and nozzle, and process optimization in 3D printing. The EC chips demonstrated good reversibility in redox reactions through cyclic voltammetry tests, and reliably detected heavy metal ions Pb(II) and Cd(II) in solutions using differential pulse anodic stripping voltammetry measurements. The results indicate that by optimizing the 3D printing of paste, EC chips can be obtained by maskless and flexible 3D printing techniques in lieu of screen printing.

Abstract This study aimed to investigate the therapeutic efficacy of programmed spatial anatomy of myopectineal orifice technique in laparoscopic total extraperitoneal hernioplasty (TEP) surgery. A total of 121 adult male patients with unilateral inguinal hernias who underwent TEP in the Department of General Surgery, Wujin Hospital, affiliated with Jiangsu University, from January 2019 to December 2020 were selected. Patients were divided into the procedural (63 cases) and traditional groups (58 cases) according to the surgical methods adopted. The procedural group underwent programmed spatial anatomy of the myopectineal orifice combined with TEP, and the traditional group underwent traditional TEP. The perioperative evaluation indicators and postoperative complications were observed and compared between the two groups. Compared with the traditional group, the time of handling hernia, the intraoperative operation time, intraoperative blood loss, postoperative ambulation time, and postoperative hospital stay in the procedural group were significantly reduced (P 0.05). The programmed spatial anatomy of the myopectineal orifice can significantly improve the treatment outcome of TEP, significantly improve the patients' intraoperative and postoperative indicators, and reduce the incidence of postoperative complications. It is worthy of being promoted among young physicians and basic hospitals.

Abstract Objective To investigate the manifestation of dry eye and its relationship with CXCR3 and CCR5 expression in patients with ocular acid burns. Methods This is a case–control study. A total of 27 eyes of 22 cases ocular with acid burns of I-V degrees from Jan.2020 to Feb.2021 in Jinshan Hospital of Fudan University were selected as observation group, and 8 eyes of 8 cases of normal people were selected as control group. The follow-up period was 3 months. The visual acuity, intraocular pressure (IOP), corneal fluorescein staining scores (CFS), breakup time of tear film (BUT), Schirmer I test, corneal thickness and tear meniscus height (TMH) were observed at 1 day, 1 and 3 months after injury. The protein expressions of CXCR3 and CCR5 were examined by ELISA and compared among groups at each time point. Results BUT and Schirmer I tests value in the observation group were lower than those in the control group 3 months after injury (BUT: Group I ~ IV p = 0.0266, p = 0.0222, p = 0.0003, p = 0.0059, respectively; Schirmer I test: Group I ~ IV p = 0.0027, p = 0.0033, p = 0.0016, p = 0.0032, respectively). CFS scores were higher than those in the control group at 1 day after injury (all p

Previous work has reported an axion insulator state in a layered topological antiferromagnet MnBi2Te4 evidenced by a zero Hall plateau. Here, in addition to the zero Hall plateau, the authors identify edge states in transport measurements at zero field which challenge the axion insulator interpretation.

In strongly correlated materials multiple electronic phases can form simultaneously in real space, offering the potential of devices with multiple electronic properties, if such phase separation can be controlled. Here, Li et al study this electronic phase separation in LaMnO3/CaMnO3/PrMnO3 superlattice, and find a nano-network electronic phase separation resulting from local strain relaxation that persists through thermal cycling.

BackgroundMetabolic syndrome (MetS) has been associated with digestive system diseases, and recent observational studies have suggested an association between MetS and cholelithiasis. However, the causal relationship between them remains unclear. This study aimed to assess the causal effect of MetS on cholelithiasis using Mendelian randomization (MR) analysis.MethodsSingle nucleotide polymorphisms (SNPs) of MetS and its components were extracted from the public genetic variation summary database. The inverse variance weighting method (IVW), weighted median method, and MR-Egger regression were used to evaluate the causal relationship. A sensitivity analysis was performed to ensure the stability of the results.ResultsIVW showed that MetS increased the risk of cholelithiasis (OR = 1.28, 95% CI = 1.13–1.46, P = 9.70E−05), and the weighted median method had the same result (OR = 1.49, 95% CI = 1.22–1.83, P = 5.68E−05). In exploring the causal relationship between MetS components and cholelithiasis, waist circumference (WC) was significantly associated with cholelithiasis. IVW analysis (OR = 1.48, 95% CI = 1.34–1.65, P = 1.15E−13), MR-Egger regression (OR = 1.62, 95% CI = 1.15–2.28, P = 0.007), and weighted median (OR = 1.73, 95% CI = 1.47–2.04, P = 1.62E−11) all found the same results.ConclusionOur study indicated that MetS increases the incidence of cholelithiasis, especially in MetS patients with abdominal obesity. Control and treatment of MetS can effectively reduce the risk of gallstone formation.

The conversion of lignite into aromatic compounds by highly active catalysts is a key strategy for lignite valorization. In this study, Ni/NiO@NC nanocomposites with a high specific surface area and a vesicular structure were successfully prepared via a facile sol–gel method. The Ni/NiO@NC catalysts exhibited excellent catalytic activity for the catalytic hydroconversion (CHC) of benzyloxybenzene (as lignite-related modeling compounds) under mild conditions (120 °C, 1.5 MPa H2, 60 min). The possible mechanism of the catalytic reaction was investigated by analyzing the type and content of CHC reaction products at different temperatures, pressures, and times. More importantly, the magnetic catalyst could be conveniently separated by a magnet after the reaction, and it maintained high catalytic efficiency after six reuses. This study provides an efficient and recyclable catalyst for the cleavage of >CH–O bonds in lignite, thereby offering another way for improved utilization of lignite.

An intelligent trajectory planning and obstacle avoidance method based on the improved twin delayed deep deterministic policy gradient algorithm (TD3) was proposed to solve the trajectory planning problem for a 4-DOF manipulator mounted on a satellite.The training strategy had 2 periods.In the pre-training stage, the target position was always guided combining with the output of the strategy network to optimize the trajectory.After the pre-training, the algorithm can autonomously output the velocity trajectory while the initial position and the target were specified randomly in the joint space of the manipulator.This target-guided mechanism decreased the unnecessary explorations and improved the learning efficiency in high dimensional action space.In the second training stage, a collision-free safety reference trajectory was firstly obtained by demonstration, and then this trajectory was constantly learned during the training process until the final output trajectory has the ability to avoid obstacles.

The present study aims to investigate effects of total flavonoids from Taraxacum mongolicum Hand.-Mazz. (FT) on fermentation quality, antioxidant status, and microbial community of Caragana korshinskii Kom. (CK) silage. CK was ensiled with no additive (CON), 1% FT, and 2% FT on a fresh weight (FW) basis for 60 days. The results showed that 1% FT and 2% FT groups displayed higher DM content than CON group, and 2% FT group had the best effect on nutrient preservation. Compared with CON and 1% FT groups, 2% FT group exhibited the best silage fermentation quality and the highest antioxidant activity, including increased lactic acid, acetic acid concentrations, and the activities of antioxidant enzymes, as well as decreased pH and the ammonia nitrogen (NH3-N) concentration. Moreover, the addition of 2% FT significantly affected the microbial community, such as increased abundance of Lactobacillus and decreased abundances of Pseudomonas and unidentified Cyanobacteria. The abundances of Lactobacillus parafarraginis and Lactobacillus brevis were negatively correlated to pH, while they were positively correlated with T-AOC, GSH-Px, and CAT activities. In conclusion, 2% FT may be used as additives to promote the fermentation quality and antioxidant activity of CK silage.

Superhydrophobic flexible strain sensors, which combine superhydrophobic coatings with highly sensitive flexible sensors, significantly enhance sensor performance and expand applications in human motion monitoring. Superhydrophobic coatings provide water repellency, surface self-cleaning, anti-corrosion, and anti-fouling properties for the sensors. Additionally, they enhance equipment durability. At present, many studies on superhydrophobic flexible sensors are still in the early research stage; the wear resistance and stability of sensors are far from reaching the level of industrial application. This paper discusses fundamental theories such as the wetting mechanism, tunneling effect, and percolation theory of superhydrophobic flexible sensors. Additionally, it reviews commonly used construction materials and principles of these sensors. This paper discusses the common preparation methods for superhydrophobic flexible sensors and summarizes the advantages and disadvantages of each method to identify the most suitable approach. Additionally, this paper summarizes the wide-ranging applications of the superhydrophobic flexible sensor in medical health, human motion monitoring, anti-electromagnetic interference, and de-icing/anti-icing, offering insights into these fields.

Ethanolysis is an effective method to depolymerize weak bonds in lignite under mild conditions, which can result in the production of high-value-added chemicals. However, improving ethanolysis yield and regulating its resulting product distribution is a big challenge. Hence, exploiting highly active catalysts is vital. In this work, Fe2(MoO4)3 catalysts with zero-dimensional nanoparticles, one-dimensional (1D) nanorods, two-dimensional (2D) nanosheets, and three-dimensional (3D) nanoflower structures were successfully prepared and applied in the ethanolysis of Naomaohu coal. The results showed that for all samples, the yield of ethanol-soluble portions (ESP) was significantly improved. The highest yield was obtained for the Fe2(MoO4)3 nanorods, with an increase from 28.84% to 47.68%, and could be attributed to the fact that the Fe2(MoO4)3 nanorods had a higher number of exposed active (100) facets. In addition, the amounts of oxygen-containing compounds, such as ethers, esters, and phenols, increased significantly. The mechanism of ethanolysis catalyzed by the Fe2(MoO4)3 nanorods was also studied using phenylbenzyl ether (BOB) as a model compound. BOB was completely converted at 260 °C after 2 h. It is suggested that Fe2(MoO4)3 nanorods can effectively break the C-O bonds of coal macromolecules, thus promoting the conversion of coal.

Purpose: As the mechanism of interaction between circular RNAs (circRNAs) and microRNAs (miRNAs) in regulating the development of prostate cancer (PCa) is not clear, this study focuses on investigating these effects. Materials and Methods: Sample tissues were collected from the PCa of patients, and microarray analysis of human circRNAs was conducted. The expression of circ_0001686, hsa_miR-411-5p (miR-411-5p) were also detected by qRT-PCR. Circ_0001686 and miR-411-5p mimics were transfected into the PCa cell lines (CWR22RV1and LNCaP) and MTT, colony formation, Transwell, and scratch wound assays were used to analyze the biological behaviors of PCa cells. Si-circ_0001686 and ASO-miR-411-5p were used as negative controls, and dual-luciferase reporter assays were performed to verify the interactions among circ_0001686, miR-411-5p, and SMAD3/TGFBR2. The levels of SMAD3 and TGFBR2 in different treated PCa cells were measured by western blot, and in vivo experiments in a nude mouse model were carried out to strengthen the in vitro findings of miR-411-5p. Results: The expression of circ_0001686 was up-regulated, while the expression of miR-411-5p was down-regulated in PCa cells. Moreover, circ_0001686 promoted cell proliferation, migration, and invasion. Molecular mechanism exploration revealed that circ_0001686 could reduce miR-411-5p, affecting the downstream target genes of SMAD3 and TGFBR2. In vitro and in vivo studies verified that miR-411-5p inhibits PCa progression. Conclusions: Circ_0001686 can reduce miR-411-5p to increase the expression of SMAD3/TGFBR2, which consequently promotes the proliferation, invasion, and migration of PCa cells.

IntroductionTotal anomalous pulmonary venous connection (TAPVC) is a rare but critical cardiac anomaly, in which pulmonary veins are connected to an abnormal location rather than the left atrium. The prognosis can be extremely poor without intervention, with a mortality of 80% during infancy. The purpose of this research is to summarize the outcomes and relevant risk factors of 80 total anomalous pulmonary venous connection (TAPVC) patients who underwent primary TAPVC sutureless repair and discuss the indications and benefits of primary sutureless repair.MethodsThis retrospective review included 80 patients with TAPVC who underwent primary sutureless repair at a single institution between January 2015 and December 2020. Patients were subdivided into 4 groups according to Darling's classification. Risk factors that increase the postoperative pulmonary vein flow velocity were explored by Multiple Linear regression.ResultsAnatomic TAPVC subtypes included supracardiac 35 (43.8%), cardiac 24 (30%), infracardiac 17 (21.2%), and mixed 4 (5%). Median age at repair was 16.5 days and median weight was 3.5 kg. Preoperative pulmonary venous obstruction (PVO)was presented in 20 (25%) patients. There were 2 early deaths and 1 late death. 2 patients developed postoperative PVO and none required reintervention. Prolonged cardiopulmonary bypass time (CPB) (p = 0.009), preoperative pneumonia (p = 0.022) and gender (p = 0.041) were found to be associated with the increase of postoperative pulmonary vein flow velocity.DiscussionUnder the primary sutureless technique, no statistical difference was observed among the 4 subgroups in terms of postoperative pulmonary vein flow velocity (p = 0.589). The primary sutureless technique may eliminate the differences between subtypes while decrease the postoperative PVO rate, which makes it applicable in any subtypes of TAPVC. Following the favorable outcomes in preventing postoperative PVO in all subtypes in this study, we advocate the indications for primary sutureless repair may expand further to all the TAPVC patients.

BackgroundCholedocholithiasis complicated with cholecystolithiasis is a common disease. This study explores a novel strategy, called ERCP-based transcystic gallbladder-preserving cholecystolithotomy, for the simultaneous removal of common bile duct stones and gallbladder stones.MethodsFrom December 2018 to June 2021, all patients with cholecystolithiasis and common bile duct stones who met the criteria for gallbladder preservation in our hospital were included in the study and prospectively followed up.ResultsWe included 48 patients, including 20 patients with acute biliary pancreatitis. All patients successfully underwent ERCP to remove common bile duct stones. One patient had gallbladder perforation during gallbladder-preserving cholecystolithotomy. The guide wire successfully entered the gallbladder, and the transpapillary gallbladder metal-covered stent was successfully placed in 44 patients. The technical success rate was 91.67% (44/48). All stones were removed in 34 patients, for a clinical success rate of 77.27% (34/44). The total postoperative complication rate was 6.25% (3/48), with 2 cases of pancreatitis (4.17%) and 1 case of cholangitis (2.08%). Three patients were lost to follow-up. Among the 31 patients who were followed up for a mean of 27 months (6–40), 5 patients (16.13%) experienced gallstone recurrence. The recurrence rates at 12 months, 18 months, 24 months, 30 months and 36 months were 0%, 3.23%, 6.45%, 12.9%, and 16.13%, respectively.ConclusionFor patients with cholecystolithiasis and common bile duct stones, ERCP-based transcystic gallbladder-preserving cholecystolithotomy without gallbladder incision can preserve gallbladder structure, and this procedure is safe and feasible for the protection of gallbladder function.Clinical trial registration: The study was registered in the Chinese Clinical Trial Registry, and the registry number is ChiCTR1900028006.

BackgroundExisting guidelines recommend endoscopic treatment within 12 h or 12–24 h for patients with esophagogastric variceal bleeding (EGVB) in cirrhosis. In addition, research findings on the optimal time for endoscopy are inconsistent.AimThe aim of this study was to investigate the relationship between the timing of endoscopy and clinical outcomes in cirrhotic patients with EGVB and to analyze the risk factors for the composite outcomes after endoscopic treatment.MethodsFrom January 2019 to June 2020, 456 patients with cirrhotic EGVB who underwent endoscopy were matched by a 1:1 propensity score. Finally, 266 patients were divided into two groups, including 133 patients within 12 h (urgent endoscopy group) of admission and after 12 h (non-urgent endoscopy group). Baseline data and clinical outcomes were compared. Logistic regression model analysis was used to determine risk factors for 30 days rebleeding and mortality.ResultsIn 266 patients, the overall 30 days rebleeding rate and mortality were 10.9% (n = 29) and 3.4% (n = 9), respectively. Patients who underwent endoscopic treatment within 12 h had significantly higher 30 days rebleeding outcomes than those who underwent treatment beyond 12 h (15 vs. 6.8%, p = 0.003). However, 30 days mortality did not differ significantly between the two groups (3 vs. 3.8%, p = 0.736). Logistic regression analysis showed that age and shock on admission were independent risk factors for the composite outcome of 30 days rebleeding and mortality in patients with EGVB.ConclusionThe 30 days rebleeding rate in patients with cirrhotic EGVB treated with urgent endoscopy was significantly higher than that in patients treated with non-urgent endoscopy, but there was no significant difference in 30 days mortality.

Abstract Manipulating valley-dependent Berry phase effects provides remarkable opportunities for both fundamental research and practical applications. Here, by referring to effective model analysis, we propose a general scheme for realizing topological magneto-valley phase transitions. More importantly, by using valley-half-semiconducting VSi2N4 as an outstanding example, we investigate sign change of valley-dependent Berry phase effects which drive the change-in-sign valley anomalous transport characteristics via external means such as biaxial strain, electric field, and correlation effects. As a result, this gives rise to quantized versions of valley anomalous transport phenomena. Our findings not only uncover a general framework to control valley degree of freedom, but also motivate further research in the direction of multifunctional quantum devices in valleytronics and spintronics.

Abstract Background To investigate the relationships between motor fusion and sex, age and spherical equivalent (SE). Methods This observational study enrolled 243 healthy, nonstrabismic adults, including 94 men and 149 women aged 20 to 59 years. The subjects were divided into three groups according to SE: myopic, emmetropic and hyperopic groups. The subjects were also divided into four groups according to age: 20–29, 30–39, 40–49 and 50–59 years groups. Motor fusion was measured with a synoptophore, including subjective angle (SA), divergence, convergence and fusional vergence range (FVR). Results The mean values of divergence, convergence and FVR for the whole sample group were 9.72 ± 0.26°, 19.34 ± 0.54°, and 29.06 ± 0.62°, respectively. A higher value of divergence was found in the myopic group than in the emmetropic group (p

Abstract A method to calculate the optimal reclosing time of AC/DC hybrid system based on dynamic energy is proposed. First, in the whole fault process starting from fault initiation to accelerated tripping of circuit breakers after reclosing, the dynamic energy function that characterizes the stability degree of system is built. On this basis, the variation rate of dynamic energy is defined as the energy accumulation speed, which quantitatively characterizes the accumulation or consumption of dynamic energy in the fault duration. And detailed expressions of energy accumulation speed when single‐phase fault and three‐phase fault occur in the system are derived respectively. Then, with the accumulated dynamic energy of system being the minimum as the objective, the optimal reclosing time is searched, and the pattern in which the trajectory of operating points passes new equilibrium point when the system is reclosed at the optimal reclosing time is revealed. Finally, hardware‐in‐the‐loop tests are conducted in RT‐LAB for simulation verification. Simulation results demonstrate that, as reclosing time varies, total accumulated dynamic energy of system has multiple minimum points. Selecting the reclosing time calculated according to the method can improve stability of system.

This paper presents a model to predict the shielding effectiveness (SE) and resonant modes of cylindrical enclosure with apertures or dielectric substrate. In this model, the Robinson equivalent circuit model (RECM) is introduced to deal with aperture impedance, and the extended form of the Baum–Liu–Tesche equation is deduced to calculate the induced voltage in the enclosure. The electromagnetic topology (EMT) model is established to analyze the process of energy transmission inside the enclosure. The energy propagation coefficient matrix and the scattering coefficient matrix are calculated to deal with the SE results of the observation point. To quantify the efficiency of the proposed model, the calculation results are compared with the full-wave transmission line matrix method (TLM) and RECM through the Fréchet distance. The comparison results show that the accuracy of the proposed model is better over a wide frequency range compared with RECM, and meanwhile, it consumes less run time and fewer CPU resources than traditional numerical methods. The validity of the presented model is verified by TLM.

In this study, a new method based on the random field model (RFM) of corrosion depth was developed to investigate the effect of corrosion randomness on the constitutive relationship of steel. Through Monte Carlo simulations of the main parameters of the RFM, a large number of corroded surfaces with different corrosion degrees corresponding to the general and offshore atmospheres were generated. Finite element parametric simulations were conducted to analyze the degradation laws and random characteristics of the mechanical properties of corroded steel. The results showed that the mechanical properties such as elastic modulus, yield strength and tensile strength all conformed to normal distribution. With an increase in the corrosion loss ratio, the mean values of all parameters decreased linearly (the yield plateau slope increased), and the standard deviations increased linearly. Finally, the probabilistic model of each mechanical property and a stochastic constitutive model of corroded steel were established.

Growing evidence has shown the oncogenic function of matrix metallopeptidase 7 (MMP7) in various tumors. However, no systemic pan-cancer analysis on the association between MMP7 and different cancers based on big clinical data is available. TIMER2, GEPIA2, UALCAN, cBioPortal, String, Metascape, and other web databases were searched in the present study. Generally, MMP7 expression is significantly upregulated in most The Cancer Genome Atlas (TCGA) cancer types compared to the paired normal controls, yet is downregulated in tumor tissues of invasive breast carcinoma (BRCA), kidney chromophobe (KICH), kidney renal clear cell carcinoma (KIRC), liver hepatocellular carcinoma (LIHC), and skin cutaneous melanoma (SKCM). MMP7 protein expression is notably higher in the primary tumor tissues of colon cancer, lung adenocarcinoma (LUAD), and uterine corpus endometrial carcinoma (UCEC) than in normal tissues and is significantly lower in the primary tumor tissues of breast cancer, clear cell renal carcinoma, and ovarian cancer. Furthermore, MMP7 expression is strongly associated with pathological stages, clinical outcomes, tumor mutational burden (TMB), and microsatellite instability (TSI). Gene amplification was detected in most TCGA cancer types. In addition, the missense mutation is the primary type of MMP7 genetic alteration in tumors. Significant positive correlations between MMP7 expression and cancer-associated fibroblasts (CAFs) have been demonstrated in most TCGA cancers. MMP7 expression was also found to be positively correlated with infiltration of dendritic cells and macrophages in some specific tumor types. Functional enrichment analysis by the Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways and gene ontology (GO) methods revealed that RNA processing and DNA damage checkpoints might reveal the pathogenetic mechanisms of MMP7. This pan-cancer analysis provides a clear panorama for the tumorigenic roles of MMP7 across different cancer types. Moreover, MMP7 could be a potential drug therapeutic target in such cancers.

Abstract Background Accurate prediction of major adverse cardiovascular events (MACEs) is very important for the management of acute coronary syndrome (ACS) patients. We aimed to construct an effective prognostic nomogram for individualized risk estimates of MACEs for patients with ACS after percutaneous coronary intervention (PCI). Methods This was a prospective study of patients with ACS after PCI from January 2013 to July 2019 (n = 2465). After removing patients with incomplete clinical information, a total of 1986 patients were randomly divided into evaluation (n = 1324) and validation (n = 662) groups. Predictors included in the nomogram were determined by a multivariate Cox proportional hazards regression model based on the training set. Receiver operating characteristic (ROC) curves and calibration curves were used to assess the discrimination and predictive accuracy of the nomogram, which were then compared with those of the classic models. The clinical utility of the nomogram was assessed by X-tile analysis and Kaplan–Meier curve analysis. Results Independent prognostic factors, including lactate level, age, left anterior descending branch stenosis, right coronary artery stenosis, brain natriuretic peptide level, and left ventricular ejection fraction, were determined and contained in the nomogram. The nomogram achieved good areas under the ROC curve of 0.712–0.762 in the training set and 0.724–0.818 in the validation set and well-fitted calibration curves. In addition, participants could be divided into two risk groups (low and high) according to this model. Conclusions A simple-to-use nomogram incorporating lactate level effectively predicted 6-month, 1-year, and 4-year MACE incidence among patients with ACS after PCI.

Abstract Aims This study aimed to determine prevalence, predictors, and association with ischaemic stroke risk of spontaneous echocardiographic contrast (SEC) or left ventricular thrombus (LVT) in patients with heart failure with reduced ejection fraction (HFrEF). Methods and results Clinical, echocardiographic, and follow‐up data from January 2009 through February 2019 were retrospectively extracted from electronic medical records of patients with heart failure with left ventricular ejection fraction 0.05). In patients with sinus rhythm, the associations between SEC/LVT and ischaemic stroke persist with HRs of 2.57 (95% CI: 1.69–3.92) and 5.74 (95% CI: 3.38–9.75). Conclusions In patients with HFrEF, SEC was not uncommon and increased risk of ischaemic stroke as well as LVT. Anticoagulants could play a role in the reduction of stroke risk, suggesting that patients with SEC/LVT, even those in sinus rhythm, would benefit from systemic anticoagulation treatment.

Abstract Background The ankle joint complex (AJC) is of fundamental importance for balance, support, and propulsion. However, it is particularly susceptible to musculoskeletal and neurological injuries, especially neurological injuries such as drop foot following stroke. An important factor in ankle dysfunction is damage to the central nervous system (CNS). Correspondingly, the fundamental goal of rehabilitation training is to stimulate the reorganization and compensation of the CNS, and to promote the recovery of the motor system’s motor perception function. Therefore, an increasing number of ankle rehabilitation robots have been developed to provide long-term accurate and uniform rehabilitation training of the AJC, among which the parallel ankle rehabilitation robot (PARR) is the most studied. The aim of this study is to provide a systematic review of the state of the art in PARR technology, with consideration of the mechanism configurations, actuator types with different trajectory tracking control techniques, and rehabilitation training methods, thus facilitating the development of new and improved PARRs as a next step towards obtaining clinical proof of their rehabilitation benefits. Methods A literature search was conducted on PubMed, Scopus, IEEE Xplore, and Web of Science for articles related to the design and improvement of PARRs for ankle rehabilitation from each site’s respective inception from January 1999 to September 2020 using the keywords “ parallel”, “ ankle”, and “ robot”. Appropriate syntax using Boolean operators and wildcard symbols was utilized for each database to include a wider range of articles that may have used alternate spellings or synonyms, and the references listed in relevant publications were further screened according to the inclusion criteria and exclusion criteria. Results and discussion Ultimately, 65 articles representing 16 unique PARRs were selected for review, all of which have developed the prototypes with experiments designed to verify their usability and feasibility. From the comparison among these PARRs, we found that there are three main considerations for the mechanical design and mechanism optimization of PARRs, the choice of two actuator types including pneumatic and electrically driven control, the covering of the AJC’s motion space, and the optimization of the kinematic design, actuation design and structural design. The trajectory tracking accuracy and interactive control performance also need to be guaranteed to improve the effect of rehabilitation training and stimulate a patient’s active participation. In addition, the parameters of the reviewed 16 PARRs are summarized in detail with their differences compared by using figures and tables in the order they appeared, showing their differences in the two main actuator types, four exercise modes, fifteen control strategies, etc., which revealed the future research trends related to the improvement of the PARRs. Conclusion The selected studies showed the rapid development of PARRs in terms of their mechanical designs, control strategies, and rehabilitation training methods over the last two decades. However, the existing PARRs all have their own pros and cons, and few of the developed devices have been subjected to clinical trials. Designing a PARR with three degrees of freedom (DOFs) and whereby the mechanism’s rotation center coincides with the AJC rotation center is of vital importance in the mechanism design and optimization of PARRs. In addition, the design of actuators combining the advantages of the pneumatic-driven and electrically driven ones, as well as some new other actuators, will be a research hotspot for the development of PARRs. For the control strategy, compliance control with variable parameters should be further studied, with sEMG signal included to improve the real-time performance. Multimode rehabilitation training methods with multimodal motion intention recognition, real-time online detection and evaluation system should also be further developed to meet the needs of different ankle disability and rehabilitation stages. In addition, the clinical trials are in urgent need to help the PARRs be implementable as an intervention in clinical practice.

The widely used simple cubic-centered (SCC) model structure has limitations in handling diagonal loading and accurately representing Poisson’s ratio. Therefore, the objective of this study is to develop a set of modeling procedures for granular material discrete element models (DEM) with high efficiency, low cost, reliable accuracy, and wide application. The new modeling procedures use coarse aggregate templates from an aggregate database to improve simulation accuracy and use geometry information from the random generation method to create virtual specimens. The hexagonal close-packed (HCP) structure, which has advantages in simulating shear failure and Poisson’s ratio, was employed instead of the SCC structure. The corresponding mechanical calculation for contact micro-parameters was then derived and verified through simple stiffness/bond tests and complete indirect tensile (IDT) tests of a set of asphalt mixture specimens. The results showed that (1) a new set of modeling procedures using the hexagonal close-packed (HCP) structure was proposed and was proved to be effective, (2) micro-parameters of the DEM models were transit form material macro-parameters based on a set of equations that were derived based on basic configuration and mechanism of discrete element theories, and (3) that the results from IDT tests prove that the new approach to determining model micro-parameters based on mechanical calculation is reliable. This new approach may enable a wider and deeper application of the HCP structure DEM models in the research of granular material.

Integrated methods are used in the modification of trajectory, including improved perturbation impact point deviation prediction, adaptive proportional guidance and adaptive proportional differential guidance, thus improving the firing accuracy of guided mortar shell. The six degrees of freedom of both the trajectory model and the control model were established, and their guidance laws were designed based on the three guidance schemes. Firstly, the perturbation impact point deviation prediction method is improved by setting up a discrimination factor in the rising phase of trajectory based on the principle of traditional perturbation impact point deviation prediction method and in combination with the trajectory characteristics of guided mortar, which further improves the correction efficiency. The adaptive proportional guidance law is designed in the longitudinal plane, while the adaptive proportional differential guidance law is designed in the transverse plane due to the fact that the constant proportional coefficient in the proportional guidance law does not conform to the requirements of actual trajectory. In this paper, Monte Carlo simulation method and ammunition flight test are used to verify the designed guidance law, and the simulation results illustrate that the integrated guidance method is both reasonable and effective. As for the error of the guidance tool and actuator, the method is available for the reduction of impact point deviation and the improvement of accuracy. The circular error probability (CEP) not under control decreases from 126.317m to 10.1284m when control is applied. Besides, the feasibility of the designed guidance law is verified by the flight tests of guided mortar projectile in large, medium and small range respectively from the perspective of engineering application. It can be seen from the test trajectory impact point data that the guidance law is available for the effective correction of trajectory deviation in the actual hardware operation and site environment with reliable guidance. As the outcome, the CEP reaches 10.86m, and the impact point deviation of some guided missiles is within 2m.

The safe realization of on-orbit capture remains a challenging task because of uncontrolled service objects, big impact forces, post-impact control, and so on. In this study, based on the relationships between the kinematics and forces established by impedance control, a force constraint function is developed to reduce the contact force during the collision process of capture. Additionally, to realize flexible contact and improve motion performance during the capture process, a control method combining impedance and a sliding mode is designed to make the end-effector exhibit mass-spring-damping behavior after contact with the target, decreasing movement overshoot and stabilization time. Finally, numerical simulations are carried out in a scenario where a planar two-link space robot is utilized to capture a non-cooperative target, and the effectiveness of the proposed method is demonstrated.

Introduction: Mucinous carcinoma (MC) of the breast is a special histological type of breast cancer. Clinicopathological characteristics and genomic features of MC is not fully understood. Materials and methods: 186,497 primary breast cancer patients from SEER database diagnosed with invasive ductal carcinoma (IDC) or MC were included. 801 primary IDC or MC patients from TCGA cohort were included for transcriptomic and genomic analysis. Results: MC patients were older, had lower tumor grade and T and N stage, higher hormone receptor positive proportions and lower HER2 positive proportions than IDC patients. Kaplan-Meier plots showed that the breast cancer-specific survival (BCSS) of MC patients was significantly better than IDC patients (P

Colorimetric biosensors can be used to detect a particular analyte through color changes easily by naked eyes or simple portable optical detectors for quantitative measurement. Thus, it is highly attractive for point-of-care detections of harmful viruses to prevent potential pandemic outbreak, as antiviral medication must be administered in a timely fashion. This review paper summaries existing and emerging techniques that can be employed to detect viruses through colorimetric assay design with detailed discussion of their sensing principles, performances as well as pros and cons, with an aim to provide guideline on the selection of suitable colorimetric biosensors for detecting different species of viruses. Among the colorimetric methods for virus detections, loop-mediated isothermal amplification (LAMP) method is more favourable for its faster detection, high efficiency, cheaper cost, and more reliable with high reproducible assay results. Nanoparticle-based colorimetric biosensors, on the other hand, are most suitable to be fabricated into lateral flow or lab-on-a-chip devices, and can be coupled with LAMP or portable PCR systems for highly sensitive on-site detection of viruses, which is very critical for early diagnosis of virus infections and to prevent outbreak in a swift and controlled manner.

Based on localized surface plasmon resonance (LSPR) enhanced quantum dot (QD) emission in a sandwich assay of “capture PCT antibody/PCT/detection PCT antibody labelled with QD” on a gold nanoarray chip, a fully automated point-of-care (POC) system for quick quantitative analysis of procalcitonin (PCT) for sepsis diagnostics was developed. The core technology of the system is to design and fabricate gold nanostructures that can generate plasmonics at resonant wavelength coincident with excitation wavelength of the fluorescent dyes. Gold nanopillar arrays at the size of 140 nm square and 320 nm pitch were found to be good candidates for the desired dye emission. Gold nanochip fabricated by e-beam lithography or nanoimprinting was integrated into a microfluidic chip, with analyte sampling and bioassay reagent flow controlled by LabVIEW program. To detect QD emission of the bioassay from the chip, a CCD camera and a laser source controlled by LabVIEW were incorporated to form a user-friendly and fully-automated POC system for on-site detection of PCT in clinics. Upon detection, the microfluidic chip is inserted into the POC system, where the processes of blood sample loading, detection antibody recognition, fluorescent dye labelling, fluorescent detection, and data analysis are conducted automatically in the device within 30 min at a test sensitivity of 0.5 ng/ml, which fulfills the clinical needs for diagnosis of sepsis through PCT biomarker.

Magneto-optical effects in magnets are commonly attributed to the interplay between exchange splitting and spin-orbit coupling. Here, Feng et al. report a topological magneto-optical effect in non-coplanar antiferromagnets due to finite scalar spin chirality, without any reference to exchange splitting or spin-orbit coupling.

Sol-Gel-based reaction mixture sols have been long used to fabricate dense and uniform bioactive coatings with superior mechanical stability over metallic implants. On account of precise control over synthesis, fabrication, formed and low temperature of processing, this technology is one of the most feasible routes to produce bio-ceramic coatings. The study aims to develop a physical barrier over metal implants in form of bioinert Zirconia coatings, phase-stabilized using Dysprosium. The metallic substrates were cut into 10 mm × 10 mm samples and diamond polished after being polished with a 1000 grade emery sheet. Novel spin-coated zirconia films were fabricated over 316L Stainless steel substrates and were sintered at 600°C to obtain firm and uniform crack-free coatings. The thickness of the coatings was determined by ELCA-D meter thermal analysis was performed using TGA-DTA. Phase determination was performed using X-Ray diffraction followed by morphological investigations using Scanning electron microscopy. The corrosion resistance was evaluated with Polarization studies and electrokinetic data was derived using Tafel extrapolation. Biocompatibility evaluation was performed against MG-63 cell lines and RBCs along with bone-forming ability in vitro in SBF. Stable crack-free 3 Layer coatings fabricated at 2000 rpm for 3 s with a thickness of around 1 μm were found to be optimal for corrosion resistance behavior of steel implants at a low I Corr value of 0.501 µA/cm 2 and adhesion strength of 40.93 MPa when untreated falling down to 39.92 MPa when immersed in SBF. The study concludes that medium rpm coatings sustain enough sol to produce crack-free coatings that form a strong physical barrier between body fluid and implant surface thereby reducing the attack of corrosive ions and protecting the implant surface without participating in any form of bioactivity but supporting native bone regeneration capabilities.

Gastric cancer is a major health burden worldwide. Circular RNAs (circRNAs) are a novel family of noncoding RNAs that are involved in multiple types of cancers, including gastric cancer. As biological functions and the underlying molecular mechanisms of the newly identified circRNA circ0007360 have not been investigated, our present study focused on the role of circ0007360 in the progression of gastric cancer. After characterizing circ0007360 as a cytoplasmic circRNA, we revealed the inhibitory effects of circ0007260 on the survival, migration, invasion, and stemness of gastric cancer cells. Subsequently, miR-762 was identified as a direct target microRNA (miRNA) of circ0007360 and was proved to act as a vital downstream transcript to fulfill the tumor-promoting effects in the absence of circ0007360. Furthermore, we demonstrated that interferon regulatory factor 7 (IRF7), which was validated as a target gene of miR-762, serves as an indirect target of circ0007360 to attenuate the progression of gastric cancer. Moreover, in vivo experiments confirmed the potentiation of gastric cancer cell growth and stemness upon depletion of circ0007360. In summary, our results revealed that activation of the circ0007360/miR-762/IRF7 axis is a novel mechanism for the attenuation of gastric cancer progression. Our study unveils the diagnostic and therapeutic values of circ0007360 in patients with gastric cancer.

In order to achieve the attitude maneuver performance of the noncontact close-proximity formation satellite architecture, this paper presents a compound control strategy with variable-parameter sliding mode control and disturbance observer-based feedforward compensation. Firstly, the variable-parameter sliding mode control is proposed to guarantee the attitude maneuver performance of the payload module. Secondly, the collision avoiding control with disturbance observer-based feedforward compensation is proposed to guarantee the synchronization of the two separated modules within the small air clearance constraint of the noncontact Lorentz actuator. Finally, a physical air-floating platform is established to verify the effectiveness of the proposed approach.

The flammability of the biodegradable plastic PLA limits its application in industrial fields with high flame-retardant requirements. This paper provides a novel strategy for constructing refractory and thermostable PLA composites using layered double hydroxides (LDHs) chemically modified with ammonium polyphosphate (APP). XRD, FT-IR, SEM-EDS, and TEM confirm that the goal of LDHs has been successfully prepared. The thermal stability and combustion behavior of PLA composites were evaluated by the thermogravimetric analysis (TGA) and cone calorimetry tests (CCT). The crystallization behavior and tensile performances were also examined. The results showed that the incorporation of 15 wt% MgAlY-APP-LDHs practically makes the PLA composites reach the UL-94 V-0 grade. There were 43% and 20% reduction in the PHRR and THR of PLA/15APP-LDHs respectively due to the catalytic effect of Y elements and barrier effects of LDHs, which was a major performance against fire hazards. Furthermore, the increase in crystallinity and the decrease in mechanical strength of PLA composites are attributed to the nucleation of LDHs. In short, this research introduces the production of multifunctional PLA composites through APP intercalation of LDHs, which are deemed as prospective candidates for the next generation of sustainable plastics products.

Background: Ultrasound is ideal for displaying intracranial great vessels but not intracranial microvessels and terminal vessels. Even with contrast agents, the imaging effect is still unsatisfactory. In recent years, significant theoretical advances have been achieved in super-resolution imaging. The latest commonly used ultrafast plane-wave ultrasound Doppler imaging of the brain and microbubble-based super-resolution ultrasound imaging have been applied to the imaging of cerebral microvessels and blood flow in small animals such as mice but have not been applied to in vivo imaging of the cerebral microvessels in monkeys and larger animals. In China, preliminary research results have been obtained using super-resolution imaging in certain fields but rarely in fundamental and clinical experiments on large animals. In recent years, we have conducted a joint study with the Xi'an Jiaotong University to explore the application and performance of this new technique in the diagnosis of cerebrovascular diseases in large animals.Objective: To explore the characteristics and advantages of microbubble-based super-resolution ultrasound imaging of intracranial vessels in rhesus monkeys compared with conventional transcranial ultrasound.Methods: First, the effectiveness and feasibility of the super-resolution imaging technique were verified by modular simulation experiments. Then, the imaging parameters were adjusted based on in vitro experiments. Finally, two rhesus monkeys were used for in vivo experiments of intracranial microvessel imaging.Results: Compared with conventional plane-wave imaging, super-resolution imaging could measure the inner diameters of cerebral microvessels at a resolution of 1 mm or even 0.7 mm and extract blood flow information. In addition, it has a better signal-to-noise ratio (5.625 dB higher) and higher resolution (~30-fold higher). The results of the experiments with rhesus monkeys showed that microbubble-based super-resolution ultrasound imaging can achieve an optimal resolution at the micron level and an imaging depth >35 mm.Conclusion: Super-resolution imaging can realize the monitoring imaging of high-resolution and fast calculation of microbubbles in the process of tissue damage, providing an important experimental basis for the clinical application of non-invasive transcranial ultrasound.

The development of highly selective and highly sensitive nanometer colorimetric chemical sensors is an urgent requirement in the immediate detection of heavy metal ions. In this work, silver-nanoparticle (Ag NPs)-based chemosensors were prepared by a simple and green method, in which the silver nitrate, carboxymethyl cellulose sodium (CMS) and Polyvinylpyrrolidone (PVP), and glucose are used as the silver source, double stabilizer and green reductant, respectively. The obtained colloidal CMS/PVP-Ag NPs showed a high dispersibility and stability, and creating a high selectivity and sensitivity to detect Hg2+ and Fe3+ with remarkable and rapid color variation. Low limits of detection (LOD) of 7.1 nM (0–20 μM) and 15.2 nM (20–100 μM) for Hg2+ and 3.6 nM for Fe3+ were achieved. More importantly, the CMS/PVP-Ag NPs has a high sensitivity even in a complex system with multiple heavy ions, the result of the practical ability to detect Hg2+ and Fe3+ in tap water and seawater reached a rational range of 98.33~104.2% (Hg2+) and 98.85~104.80% (Fe3+), indicating the great potential of the as-prepared nanocomposites colorimetric chemosensor for practical applications.