Search

This work presents a generalized substructure-based topology optimization method for passive constrained layer damping (PCLD) structures. Here, the model of PCLD structure is obtained by the Kirchhoff–Love thin plate formulation, and the whole structure is assumed to be composed of substructures with different yet connected scales and artificial lattice geometry features. Each substructure is condensed into a super-element to obtain the associated density-related matrices under the different geometry feature parameters, and the surrogate model for the stiffness and mass matrix of PCLD substructures with different densities has been particularly built. Using cubic spline interpolation, the derivatives of super-element matrices to the associated densities can be evaluated efficiently and accurately. The modal loss factor is defined as objective functions and topology optimization for the PCLD structures is formulated based on the model for PCLD plates that are described by combining the condensed substructures. Numerical examples under two lattice patterns of substructures and their corresponding physical tests show that the correctness and superiority of this substructure-based topology optimization approach for PCLD plates are verified. [ABSTRACT FROM AUTHOR]

Liners in wet ball mill for mineral processing industry must bear abrasive wear and corrosive wear, and consequently, the service life of the liner made from traditional materials, such as Hadfield steel and alloyed steels, is typically less than ten months. Bimetal liner, made from high Cr white cast iron and carbon steel, has been successfully developed by using liquid-liquid composite lost foam casting process. The microstructure and interface of the composite were analyzed using optical microscope, SEM, EDX and XRD. Micrographs indicate that the boundary of bimetal combination regions is staggered like dogtooth, two liquid metals are not mixed, and the interface presents excellent metallurgical bonding state. After heat treatment, the composite liner specimens have shown excellent properties, including hardness > 61 HRC, fracture toughness αk >16.5 J·cm-2 and bending strength >1,600 MPa. Wear comparison was made between the bimetal composite liner and alloyed steel liner in an industrial hematite ball mill of WISCO, and the results of eight-month test in wet grinding environment have proved that the service life of the bimetal composite liner is three times as long as that of the alloyed steel liner.

Copyright of Journal of Central China Normal University is the property of Huazhong Normal University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

A method based on high-performance liquid chromatography-ultraviolet (HPLC-UV) detection was developed for the rapid analysis of the specific migration of seven terephthalates and benzoates (TPBAs) in seven food simulants (10% (v/v) ethanol, 3% (m/v, i. e. 3 g/100 mL) acetic acid, 4% (v/v) acetic acid, 20% (v/v) ethanol, 50% (v/v) ethanol, 95% (v/v) ethanol, or olive oil)). Detailed comparisons were made on the extraction or purification of the seven TPBAs in olive oil food simulants by solvents, QuEChERS dSPE EMR-Lipid technology, and Captiva EMR-Lipid technology. The seven TPBAs were separated completely within 17 min by gradient elution on a phenyl column using water and methanol as the mobile phase. The detection wavelength was set at 237 nm. The injection volume was 10 μL. The linearities of the seven TPBAs were good, with r ≥0.9998 at 1-80 mg/L or 8-160 mg/kg in the seven food simulants. The average recoveries of the seven TPBAs were between 91.7% and 106%, with relative standard deviations (RSDs) between 0.1% and 3.1% ( n =6). The limits of quantification were 0.2-8.1 mg/kg. This method is simple, with convenient pretreatments, good chromatographic separation and linear relationships, as well as satisfactory recoveries and RSDs. The method has been applied to detect the specific migration of the seven TPBAs in real samples.

A novel method for simultaneous determination of total specific migration limits (SML (T)) of trimellitic, isophthalic, terephthalic, phthalic acid and their derivatives (1, 2, 4-benzenetricarboxylic anhydride, isophthaloyl chloride and terephthaloyl chloride) in food simulants (10% (v/v) ethanol, 20% (v/v) ethanol, 50% (v/v) ethanol, 3% (w/v) acetic acid and olive oil) was developed by high performance liquid chromatography-ultraviolet detection (HPLC-UV). After the migration test, the soaking solution was cooled down and vortexed. After the extraction of olive oil food simulants with 0. 1% (w/v) ammonium acetate aqueous solution, the clear aqueous solution or other aqueous food simulants was filtered through a hydrophilic polytetrafluoroethylene filter with a disposable syringe before injection. The Synergi Polar-RP column (250 mm x 4.6 mm, 4 µm) and gradient elution mode were selected. The variable wavelength detector was set at 232 nm. The limits of quantification were 0.1-0.2 mg/kg; the linearity of the method was good with r2 > 0.999 91 over the range from 0.5 to 12 mg/L for aqueous food simulants or 0.5 to 12 mg/kg for olive oil food simulants. The recoveries of them were between 94. 3% and 105% with the relative standard deviations between 0.1% and 2.3% at the levels of 1.25, 2.50, 6.25 mg/kg. The method shows the low limits of detection, good recoveries and accuracies, and meets the requirement of ( EU) No 10/2011 regulation for the total specific migration limits of trimellitic, isophthalic, terephthalic, phthalic acids and their derivatives. The method has been applied to the analysis of food contact material samples.

A novel method for rapid analysis of the migration amounts of 28 primary aromatic amines (PAAs) in aqueous food simulants (10% ethanol, 30 g/L acetic acid and 20% ethanol aqueous solution) was developed using high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). After the migration test, the soaking solution was cooled down from 100 degrees C, vortexed, filtered through a hydrophilic polytetrafluoroethylene filter with a disposable syringe, and then the filtrate was analyzed by HPLC-MS/MS. A Zorbax SB-Phenyl column (250 mm x 4.6 mm, 5 microm) was selected for chromatography. The mobile phase consisted of water and 0.1% formic acid-25% acetonitrile-methanol solution with gradient elution. The 28 PAAs in aqueous food simulants were detected by tandem mass spectrometer operated in positive electrospray ionization (ESI+) and multiple reaction monitoring (MRM) mode. The limits of quantification for the 28 PAAs were between 0.002 microg/L and 10 microg/L. The linearity of the method was good with correlation coefficients (r2) greater than 0.995 over the concentration range from 5 microg/L or 10 microg/L to 100 microg/L. The average recoveries of the 28 PAAs were between 76.6% and 114% with the relative standard deviations between 1.53% and 8.97% at the levels of 10, 20, and 40 microg/L. The method shows rapid pretreatment, the lower limits of quantification, good recoveries and accuracies, and meets the requirement of European Union (EU) No 10/2011 regulation for the specific migration of PAAs. The method has been applied to analyze the 28 PAAs in different aqueous food simulants from the migration test of 30 batches of food contact material samples exported to EU.