Search

RNA-cleaving DNAzymes and their multicomponent nucleic acid enzymes (MNAzymes) have been successfully used to detect nucleic acids and proteins. The appropriate split of the catalytic cores of DNAzymes is critical to the formation of MNAzymes with high catalytic activities. However, for protein detection, no systematic investigation has been made on the effects of the split locations and secondary structures of MNAzymes on the catalytic activities of the cleavage reaction. We systematically studied how split locations and secondary structures affect the activity of the MNAzymes that catalyze multiple cleavage steps. We engineered the MNAzymes on the basis of the RNA-cleaving DNAzyme 10-23 as a model system. We designed 28 pairs of MNAzymes, representing 14 different split locations and two secondary structures: the three-arm and the four-arm structures. By comparing the multiple turnover numbers (kobs.m) of the 28 MNAzymes, we showed that the split location between the seventh cytosine and the eighth thymine of the catalytic core region and the four-arm structure resulted in optimum catalytic activity. Binding-induced DNA assembly of the optimized MNAzymes enabled sensitive detection of two model protein targets, demonstrating promising potential of the binding-assembled MNAzymes for protein analysis. The strategy of binding-assembled MNAzymes and systematic studies measuring multiple turnover numbers (kobs.m) provide a new approach to studying other partial (split) DNAzymes and engineering better MNAzymes for the detection of specific proteins.

CRISPR-Cas systems integrated with nucleic acid amplification techniques improve both analytical specificity and sensitivity. We describe here issues and solutions for the successful integration of reverse transcription (RT), recombinase polymerase amplification (RPA), and CRISPR-Cas12a nuclease reactions into a single tube under an isothermal condition (40 °C). Specific detection of a few copies of a viral DNA sequence was achieved in less than 20 min. However, the sensitivity was orders of magnitude lower for the detection of viral RNA due to the slow initiation of RPA when the complementary DNA (cDNA) template remained hybridized to RNA. During the delay of RPA, the crRNA-Cas12a ribonucleoprotein (RNP) gradually lost its activity in the RPA solution, and nonspecific amplification reactions consumed the RPA reagents. We overcame these problems by taking advantage of the endoribonuclease function of RNase H to remove RNA from the RNA-cDNA hybrids and free the cDNA as template for the RPA reaction. As a consequence, we significantly enhanced the overall reaction rate of an integrated assay using RT-RPA and CRISPR-Cas12a for the detection of RNA. We showed successful detection of 200 or more copies of the S gene sequence of SARS-CoV-2 RNA within 5-30 min. We applied our one-tube assay to 46 upper respiratory swab samples for COVID-19 diagnosis, and the results from both fluorescence intensity measurements and end-point visualization were consistent with those of RT-qPCR analysis. The strategy and technique improve the sensitivity and speed of RT-RPA and CRISPR-Cas12a assays, potentially useful for both semi-quantitative and point-of-care analyses of RNA molecules.

Protein coronae formed with nanoparticles confer several useful properties. However, the non‐specific nature of protein corona formation makes it difficult to deliver specific proteins for therapeutic applications. Herein, we report on the construction of a new type of protein corona, termed binding‐mediated protein corona. This new corona enables the efficient and controllable delivery of functional proteins, which is otherwise challenging for conventional protein coronae. We show the design and delivery of the ribonucleoprotein corona for the CRISPR/Cas9 system. Successful gene editing in human cell lines (Hela and HEK293) demonstrates the efficient delivery, high stability, low cytotoxicity, and well‐controlled activity of the Cas9‐guide RNA ribonucleoprotein. The binding‐mediated protein corona strategy opens up new opportunities for therapeutic protein delivery., We report on the construction of a new type of protein corona, termed binding‐mediated protein corona. This new corona enables the efficient and controllable delivery of functional proteins, which is otherwise challenging for conventional protein coronae.

Arsenolipids are a class of lipid-soluble arsenic species. They are present in seafoods and show high potentials of cytotoxicity and neurotoxicity. Hindered by traditional low-throughput analytical techniques, the characterization of arsenolipids is far from complete. Here, we report on a sensitive and high-throughput screening method for arsenolipids in krill oil, tuna fillets, hairtail heads, and kelp. We demonstrate the detection and identification of 23 arsenolipids, including novel arsenic-containing fatty acids (AsFAs), hydroxylated AsFAs, arsenic-containing hydrocarbons (AsHCs), hydroxylated AsHCs, thiolated trimethylarsinic acids, and arsenic-containing lysophosphatidylcholines not previously reported. The new method incorporated precursor ion scan (PIS) into data-independent acquisition. High-performance liquid chromatography (HPLC) electrospray ionization quadrupole time-of-flight mass spectrometry (ESI-qToF-MS) was used to perform the sequential window acquisition of all theoretical spectra (SWATH). Comprehensive HPLC-MS and MS/MS data were further processed using a fragment-guided chromatographic computational program Precursorfinder developed here. Precursorfinder achieved efficient peak-picking, retention time comparison, hierarchical clustering, and wavelet coherence calculations to assemble fragment features with their target precursors. The identification of arsenolipids was supported by coeluting the HPLC-MS peaks detected with the characteristic fragments of arsenolipids. Method validation using available arsenic standards and the successful identification of previously unknown arsenolipids in seafood samples demonstrated the applicability of the method for environmental research.

The trans-cleavage activity of the target-activated CRISPR/Cas12a liberated an RNA crosslinker from a molecular transducer, which facilitated the assembly of gold nanoparticles. Integration of the molecular transducer with isothermal amplification and CRISPR/Cas12a resulted in visual detection of the N gene and E gene of SARS-CoV-2 in 45 min.

We have developed a single-tube assay for SARS-CoV-2 in patient samples. This assay combined advantages of reverse transcription (RT) loop-mediated isothermal amplification (LAMP) with clustered regularly interspaced short palindromic repeats (CRISPRs) and the CRISPR-associated (Cas) enzyme Cas12a. Our assay is able to detect SARS-CoV-2 in a single tube within 40 min, requiring only a single temperature control (62 °C). The RT-LAMP reagents were added to the sample vial, while CRISPR Cas12a reagents were deposited onto the lid of the vial. After a half-hour RT-LAMP amplification, the tube was inverted and flicked to mix the detection reagents with the amplicon. The sequence-specific recognition of the amplicon by the CRISPR guide RNA and Cas12a enzyme improved specificity. Visible green fluorescence generated by the CRISPR Cas12a system was recorded using a smartphone camera. Analysis of 100 human respiratory swab samples for the N and/or E gene of SARS-CoV-2 produced 100% clinical specificity and no false positive. Analysis of 50 samples that were detected positive using reverse transcription quantitative polymerase chain reaction (RT-qPCR) resulted in an overall clinical sensitivity of 94%. Importantly, this included 20 samples that required 30–39 threshold cycles of RT-qPCR to achieve a positive detection. Integration of the exponential amplification ability of RT-LAMP and the sequence-specific processing by the CRISPR-Cas system into a molecular assay resulted in improvements in both analytical sensitivity and specificity. The single-tube assay is beneficial for future point-of-care applications.

Binding of nucleic acid aptamers to specific targets and detection with fluorescence anisotropy (FA) or fluorescence polarization (FP) take advantage of the complementary features of aptamers and the fluorescence techniques. We review recent advances in affinity binding assays using aptamers and FA/FP, with an emphasis on studies of molecular interactions and identification of binding sites. Aptamers provide several benefits, including the ease of labelling fluorophores on specific sites, binding-induced changes in aptamer structures, hybridization of the aptamers to complementary sequences, changes in molecular volume upon binding of the aptamer to its target, and adsorption of aptamers onto nanomaterials. Some of these benefits have been utilized for FA/FP assays. Once the aptamer binds to its target, the resulting changes in molecular volume (size), structure, local rotation of the fluorophore, and/or the fluorescence lifetime influence changes to the FA/FP values. Measurements of these fluorescence anisotropy/polarization changes have provided insights into the molecular interactions, such as the binding affinity and the site of binding. Studies of molecular interactions conducted in homogeneous solutions, as well as those with separations, e.g., capillary electrophoresis, have been summarized in this review. Studies on mapping the position of binding in aptamers at the single nucleotide level have demonstrated a unique benefit of the FA/FP techniques and pointed to an exciting direction for future research.

Molecular diagnosis of COVID-19 primarily relies on the detection of RNA of the SARS-CoV-2 virus, the causative infectious agent of the pandemic. Reverse transcription polymerase chain reaction (RT-PCR) enables sensitive detection of specific sequences of genes that encode the RNA dependent RNA polymerase (RdRP), nucleocapsid (N), envelope (E), and spike (S) proteins of the virus. Although RT-PCR tests have been widely used and many alternative assays have been developed, the current testing capacity and availability cannot meet the unprecedented global demands for rapid, reliable, and widely accessible molecular diagnosis. Challenges remain throughout the entire analytical process, from the collection and treatment of specimens to the amplification and detection of viral RNA and the validation of clinical sensitivity and specificity. We highlight the main issues surrounding molecular diagnosis of COVID-19, including false negatives from the detection of viral RNA, temporal variations of viral loads, selection and treatment of specimens, and limiting factors in detecting viral proteins. We discuss critical research needs, such as improvements in RT-PCR, development of alternative nucleic acid amplification techniques, incorporating CRISPR technology for point-of-care (POC) applications, validation of POC tests, and sequencing of viral RNA and its mutations. Improved assays are also needed for environmental surveillance or wastewater-based epidemiology, which gauges infection on the community level through analyses of viral components in the community's wastewater. Public health surveillance benefits from large-scale analyses of antibodies in serum, although the current serological tests do not quantify neutralizing antibodies. Further advances in analytical technology and research through multidisciplinary collaboration will contribute to the development of mitigation strategies, therapeutics, and vaccines. Lessons learned from molecular diagnosis of COVID-19 are valuable for better preparedness in response to other infectious diseases.

DNAzyme motor systems using gold nanoparticles (AuNPs) as scaffolds are useful for biosensing and in situ amplification because these systems are free of protein enzymes, isothermal, homogeneous, and sensitive. However, detecting different targets using the available DNAzyme motor techniques requires redesigns of the DNAzyme motor. We report here a toehold-exchange translator and the translator-mediated DNAzyme motor systems, which enable sensitive responses to various nucleic acid targets using the same DNAzyme motor without requiring redesign. The translator is able to efficiently convert different nucleic acid targets into a specific output DNA that further activates the pre-silenced DNAzyme motor and consequently initiates the autonomous walking of the DNAzyme motor. Simply adjusting the target-binding region of the translator enables the same DNAzyme motor system to respond to various nucleic acid targets. The translator-mediated DNAzyme motor system is able to detect as low as 2.5 pM microRNA-10b and microRNA-21 under room temperature without the need of separation or washing. We further demonstrate the versatility of the translator and the DNAzyme motor by successful construction and operation of four logic gates, including OR, AND, NOR, and NAND logic gates. These logic gates use two microRNA targets as inputs and generate amplified fluorescence signals from the operation of the same DNAzyme motor. Incorporation of the toehold-exchange translator into the DNAzyme motor technology improves the biosensing applications of DNA motors to diverse nucleic acid targets.

Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) and CRISPR-associated (Cas) systems have revolutionized biological and biomedical sciences in many ways. The last few years have also seen tremendous interest in deploying the CRISPR-Cas toolbox for analytical and diagnostic assay development because CRISPR-Cas is one of the most powerful classes of molecular machineries for the recognition and manipulation of nucleic acids. In the short period of development, many CRISPR-enabled assays have already established critical roles in clinical diagnostics, biosensing, and bioimaging. We describe in this review the recent advances and design principles of CRISPR mediated analytical tools with an emphasis on the functional roles of CRISPR-Cas machineries as highly efficient binders and molecular scissors. We highlight the diverse engineering approaches for molecularly modifying CRISPR-Cas machineries and for devising better readout platforms. We discuss the potential roles of these new approaches and platforms in enhancing assay sensitivity, specificity, multiplexity, and clinical outcomes. By illustrating the biochemical and analytical processes, we hope this review will help guide the best use of the CRISPR-Cas toolbox in detecting, quantifying and imaging biologically and clinically important molecules and inspire new ideas, technological advances and engineering strategies for addressing real-world challenges such as the on-going COVID-19 pandemic.

Millions of people worldwide are exposed to unacceptable levels of arsenic, a proven human carcinogen, in drinking water. In animal models, arsenic and selenium are mutually protective through formation and biliary excretion of seleno-bis (S-glutathionyl) arsinium ion [(GS)2AsSe]−. Selenium-deficient humans living in arsenic-endemic regions are at increased risk of arsenic-induced diseases, and may benefit from selenium supplementation. The influence of selenium on human arsenic hepatobiliary transport has not been studied using optimal human models. HepaRG cells, a surrogate for primary human hepatocytes, were used to investigate selenium (selenite, selenide, selenomethionine, and methylselenocysteine) effects on arsenic hepatobiliary transport. Arsenite + selenite and arsenite + selenide at different molar ratios revealed mutual toxicity antagonism, with the latter being higher. Significant levels of arsenic biliary excretion were detected with a biliary excretion index (BEI) of 14 ± 8%, which was stimulated to 32 ± 7% by selenide. Consistent with the formation and biliary efflux of [(GS)2AsSe]−, arsenite increased the BEI of selenide from 0% to 24 ± 5%. Arsenic biliary excretion was lost in the presence of selenite, selenomethionine, and methylselenocysteine. Sinusoidal export of arsenic was stimulated ∼1.6-fold by methylselenocysteine, but unchanged by other selenium forms. Arsenic canalicular and sinusoidal transport (±selenide) was temperature- and GSH-dependent and inhibited by MK571. Knockdown experiments revealed that multidrug resistance protein 2 (MRP2/ABCC2) accounted for all detectable biliary efflux of arsenic (±selenide). Overall, the chemical form of selenium and human MRP2 strongly influenced arsenic hepatobiliary transport, information critical for human selenium supplementation in arsenic-endemic regions.

Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) and CRISPR-associated (Cas) protein systems have transformed the field of genome editing and transcriptional modulation. Progress in CRISPR–Cas technology has also advanced molecular detection of diverse targets, ranging from nucleic acids to proteins. Incorporating CRISPR–Cas systems with various nucleic acid amplification strategies enables the generation of amplified detection signals, enrichment of low-abundance molecular targets, improvements in analytical specificity and sensitivity, and development of point-of-care (POC) diagnostic techniques. These systems take advantage of various Cas proteins for their particular features, including RNA-guided endonuclease activity, sequence-specific recognition, multiple turnover trans-cleavage activity of Cas12 and Cas13, and unwinding and nicking ability of Cas9. Integrating a CRISPR–Cas system after nucleic acid amplification improves detection specificity due to RNA-guided recognition of specific sequences of amplicons. Incorporating CRISPR–Cas before nucleic acid amplification enables enrichment of rare and low-abundance nucleic acid targets and depletion of unwanted abundant nucleic acids. Unwinding of dsDNA to ssDNA using CRISPR–Cas9 at a moderate temperature facilitates techniques for achieving isothermal exponential amplification of nucleic acids. A combination of CRISPR–Cas systems with functional nucleic acids (FNAs) and molecular translators enables the detection of non-nucleic acid targets, such as proteins, metal ions, and small molecules. Successful integrations of CRISPR technology with nucleic acid amplification techniques result in highly sensitive and rapid detection of SARS-CoV-2, the virus that causes the COVID-19 pandemic., Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) and CRISPR-associated (Cas) protein systems revolutionize genome engineering and advance analytical chemistry and diagnostic technology.

The Alberta Biomonitoring Program (ABP) was created in 2005 with the initial goal of establishing baseline levels of exposure to environmental chemicals in specific populations in the province of Alberta, Canada, and was later expanded to include multiple phases. The first two phases focused on evaluating exposure in pregnant women (Phase One, 2005) and children (Phase Two, 2004-2006) by analyzing residual serum specimens. Phase Three (2013-2016) employed active recruitment techniques to evaluate environmental exposures using a revised list of chemicals in paired serum pools from pregnant women and umbilical cord blood. These three phases of the program monitored a total of 226 chemicals in 285 pooled serum samples representing 31,529 individuals. Phase Four (2017-2020) of the ABP has taken a more targeted approach, focusing on the impact of the federal legalization of cannabis on the exposure of pregnant women in Alberta to cannabis, as well as tobacco and alcohol using residual prenatal screening serum specimens. Chemicals monitored in the first three phases include herbicides, neutral pesticides, metals, metalloids, and micronutrients, methylmercury, organochlorine pesticides, organophosphate pesticides, parabens, phthalate metabolites, perfluoroalkyl substances (PFAS), phenols, phytoestrogens, polybrominated compounds, polychlorinated biphenyls (PCBs), dioxins and furans, polycyclic aromatic hydrocarbons (PAHs), and tobacco biomarkers. Phase Four monitored six biomarkers of tobacco, alcohol, and cannabis. All serum samples were pooled. Mean concentrations and 95% confidence intervals (CIs) were calculated for the chemicals detected in ≥25% of the sample pools. cross the first three phases, the data from the ABP has provided baseline exposure levels for the chemicals in pregnant women, children, and newborns across the province. Comparison within and among the phases has highlighted differences in exposure levels with age, geography, seasonality, sample type, and time. The strategies employed throughout the program phases have been demonstrated to provide effective models for population biomonitoring.

SummaryTMPRSS2-ERG gene fusion, a molecular alteration driving nearly a half of prostate cancer cases, has been intensively characterized at the transcript level, while limited studies explored the molecular identity and function of the endogenous fusion at the protein level. Here, we developed and applied immunoprecipitation-mass spectrometry (IP-MS) assays for the measurement of a low-abundance T1E4 TMPRSS2-ERG fusion protein, its isoforms and its interactome in VCaP prostate cancer cells. IP-MS assays quantified total ERG (∼27,000 copies/cell) and its four unique isoforms, and revealed that the T1E4-ERG isoform accounts for 71% of the total ERG protein in VCaP cells. For the first time, the N-terminal peptide (methionine-truncated and N-acetylated TASSSSDYGQTSK) unique for the T1/E4 fusion was identified and quantified. IP-MS with the C-terminal antibodies identified 29 proteins in the ERG interactome, including SWI/SNF chromatin remodeling complex subunits and numerous transcriptional co-regulators. Our data also suggested that TMPRSS2-ERG protein-protein interactions were exerted through at least two different regions. Knowledge on the distinct TMPRSS2-ERG protein isoforms and interactomes may facilitate development of more accurate diagnostics and targeted therapeutics of prostate cancer.

Arsenic affects hundreds of millions of people around the world, with majority of the arsenic-affected populations living in Southeast Asia. Recent reports estimated that population exposed to water arsenic at concentrations higher than the World Health Organization guideline level of 10 μg/L or higher than 50 μg/L included 70–80 million people living in India, 28–60 million in Bangladesh, 47–60 million in Pakistan, about 10 million in Vietnam, 2–5 million in China, more than 3 million in Nepal, about 3.4 million in Myanmar, and 0.32–2.4 million in Cambodia. The sum of the arsenic-affected populations from these areas ranged from 150 million to 240 million. Chronic exposure to high concentrations of arsenic from drinking water is associated with increased risk of various adverse health effects, such as cancers, cardiovascular disease, diabetes, and neurological effects. Continued research and mitigation actions are required to protect public health from arsenic-induced diseases.

Affinity probes, such as nucleic acid aptamers, have been combined with fluorescence anisotropy (FA)/fluorescence polarization (FP) technology for the development of a diverse range of assays. Formation of a complex between a small fluorescent molecule and its binding partner usually increases the overall size of the fluorescent molecule and decreases its rate of rotation, resulting in increases in fluorescence anisotropy/polarization. Structure-switching of the fluorescently labeled aptamers arising from target binding can also affect molecular volume, local rotation of the fluorophore, and/or fluorescence lifetime, causing changes in anisotropy/polarization. Incorporation of the unique adsorptive properties of single-stranded nucleic acid aptamers on nanomaterials, hybridization of aptamers with complementary sequences, and the amplifiable ability of nucleic acid aptamers have broadened the applications of fluorescence anisotropy assays and enhanced their sensitivity. This review focuses on nucleic acid aptamer-based fluorescence anisotropy assays for the detection of small molecules, such as therapeutic drugs, environmental contaminants, natural toxins, and metabolites.

Beacon-mediated Exponential Amplification Reaction (BEAR) enables isothermal, exponential signal amplification. BEAR uses only a single enzyme and a single primer. Detection of 0.2 amol of a mitochondrial DNA with a point mutation in less than an hour demonstrates an application of the BEAR technique for nucleic acid research.

The e antigen of hepatitis B (HBeAg) is positively associated with an increased risk of developing liver cancer and cirrhosis in chronic hepatitis B (CHB) patients. Clinical monitoring of HBeAg provides guidance to the treatment of CHB and the assessment of disease progression. We describe here an affinity binding assay for HBeAg, which takes advantage of G-quadruplex aptamers for enhanced binding and stability. We demonstrate a strategy to improve the binding affinity of aptamers by modifying their sequences upon their G-quadruplex and secondary structures. On the basis of predicting a stable G-quadruplex and a secondary structure, we truncated 19 nucleotides (nt) from the primer regions of an 80-nt aptamer, and the resulting 61-nt aptamer enhanced binding affinity by 19 times (Kd = 1.2 nM). We mutated a second aptamer (40 nt) in one loop region and incorporated pyrrolo-deoxycytidine to replace deoxycytidine in another loop. The modified 40-nt aptamer, with a stable G-quadruplex and two modified loops, exhibited a 100 times higher binding affinity for HBeAg (Kd = 0.4 nM) than the unmodified original aptamer. Using the two newly modified aptamers, one serving as the capture and the other as the reporter, we have developed an improved sandwich binding assay for HBeAg. Analyses of HBeAg in serum samples (concentration ranging from 0.1 to 60 ng/mL) of 10 hepatitis B patients, showing consistent results with clinical tests, demonstrate a successful application of the aptamer modification strategy and the associated aptamer binding assay.

Isothermal exponential amplification techniques, such as strand-displacement amplification (SDA), rolling circle amplification (RCA), loop-mediated isothermal amplification (LAMP), nucleic acid sequence based amplification (NASBA), helicase-dependent amplification (HDA), and recombinase polymerase amplification (RPA), have great potential for on-site, point-of-care, and in situ assay applications. These amplification techniques eliminate the need for temperature cycling, as required for the polymerase chain reaction (PCR), while achieving comparable amplification yields. We highlight here recent advances in the exponential amplification reaction (EXPAR) for the detection of nucleic acids, proteins, enzyme activities, cells, and metal ions. The incorporation of fluorescence, colorimetric, chemiluminescence, Raman, and electrochemical approaches enables the highly sensitive detection of a variety of targets. Remaining issues, such as undesirable background amplification resulting from nonspecific template interactions, must be addressed to further improve isothermal and exponential amplification techniques.

The Exponential Amplification Reaction (EXPAR) enables isothermal amplification of nucleic acids. However, applications of EXPAR for the amplification of trace amounts of nucleic acids are hindered by high background. The mechanism of background generation is currently not well understood, although it is assumed to involve nonspecific extension of EXPAR templates by DNA polymerase. We present here a study of the mechanisms of triggering EXPAR background amplification. We show that interactions of EXPAR templates lead to background amplification via polymerase extension of the templates. We further designed and tested two strategies to minimize background amplification: blocking of the 3'-end of the template and sequence-independent weakening of the template-template interactions. Sequence-specific 3'-end blocking showed reduced background, suggesting that 3'-end template interactions are a contributing factor to background amplification. Sequence-independent binding of the whole EXPAR template substantially reduced background amplification by competing with template-template interactions along the entire template sequence. This study provided evidence that nonspecific template interactions and extension by DNA polymerase triggered the amplification of background in EXPAR. The addition of single stranded binding protein to bind nonspecifically with the EXPAR template decreased background by 3 orders of magnitude.

Arsenic in hair and nails has been used to assess chronic exposure of humans to environmental arsenic. However, it remains to be seen whether it is appropriate to evaluate acute exposure to sub-lethal doses of arsenic typically used in therapeutics. In this study, hair, fingernail and toenail samples were collected from nine acute promyelocytic leukemia (APL) patients who were administered intravenously the daily dose of 10 mg arsenic trioxide (7.5 mg arsenic) for up to 54 days. These hair and nail samples were analyzed for arsenic species using high performance liquid chromatography separation and inductively coupled plasma mass spectrometry detection (HPLC-ICPMS). Inorganic arsenite was the predominant form among water-extractable arsenicals. Dimethylarsinic acid (DMAV), monomethylarsonic acid (MMAV), monomethylarsonous acid (MMAIII), monomethylmonothioarsonic acid (MMMTAV), and dimethylmonothioarsinic acid (DMMTAV) were also detected in both hair and nail samples. This is the first report of the detection of MMAIII and MMMTAV as metabolites of arsenic in hair and nails of APL patients.

The ATP-binding cassette (ABC) transporter multidrug resistance protein 1 (MRP1/ABCC1) protects cells from arsenic (a proven human carcinogen) through the cellular efflux of arsenic triglutathione [As(GS)3] and the diglutathione conjugate of monomethylarsonous acid [MMA(GS)2]. Previously, differences in MRP1 phosphorylation (at Y920/S921) and N-glycosylation (at N19/N23) were associated with marked differences in As(GS)3 transport kinetics between HEK293 and HeLa cell lines. In the current study, cell line differences in MRP1-mediated cellular protection and transport of other arsenic metabolites were explored. MRP1 expressed in HEK293 cells reduced the toxicity of the major urinary arsenic metabolite dimethylarsinic acid (DMAV), and HEK-WT-MRP1-enriched vesicles transported DMAV with high apparent affinity and capacity (Km 0.19 µM, Vmax 342 pmol⋅mg-1protein⋅min-1). This is the first report that MRP1 is capable of exporting DMAV, critical for preventing highly toxic dimethylarsinous acid formation. In contrast, DMAV transport was not detected using HeLa-WT-MRP1 membrane vesicles. MMA(GS)2 transport by HeLa-WT-MRP1 vesicles had a greater than threefold higher Vmax compared with HEK-WT-MRP1 vesicles. Cell line differences in DMAV and MMA(GS)2 transport were not explained by differences in phosphorylation at Y920/S921. DMAV did not inhibit, whereas MMA(GS)2 was an uncompetitive inhibitor of As(GS)3 transport, suggesting that DMAV and MMA(GS)2 have nonidentical binding sites to As(GS)3 on MRP1. Efflux of different arsenic metabolites by MRP1 is likely influenced by multiple factors, including cell and tissue type. This could have implications for the impact of MRP1 on both tissue-specific susceptibility to arsenic-induced disease and tumor sensitivity to arsenic-based therapeutics.

Halobenzoquinones (HBQs) are a class of emerging disinfection byproducts. Chronic exposure to chlorinated drinking water is potentially associated with an increased risk of human bladder cancer. HBQ-induced cytotoxicity involves depletion of cellular glutathione (GSH), but the underlying mechanism remains unclear. Here we used ultrahigh performance liquid chromatography-high resolution mass spectrometry and electron paramagnetic resonance spectroscopy to study interactions between HBQs and GSH and found that HBQs can directly react with GSH, forming various glutathionyl conjugates (HBQ-SG) in both aqueous solution and HepG2 cells. We found that the formation of HBQ-SG varies with the initial molar ratio of GSH to HBQ in reaction mixtures. Higher molar ratios of GSH to HBQ facilitate the conjugation of more GSH molecules to an HBQ molecule. We deduced the reaction mechanism between GSH and HBQs, which involves redox cycling-induced formation of halosemiquinone (HSQ) free radicals and glutathione disulfide, Michael addition, as well as nucleophilic substitution. The proposed reaction rates are in the following order: formation of HSQ radicalssubstitution of bromine by GSHMichael addition of GSH on the benzoquinone ringsubstitution of chlorine by GSHsubstitution of the methyl group by GSH. The conjugates identified in HBQ-treated HepG2 cells were the same as those found in aqueous solution containing a 5:1 ratio of GSH:HBQs.

Contamination of organic pollutants in the environment is usually accompanied by heavy metals. However, a little information on the influences of heavy metals on the uptake, translocation and transformation of organic pollutants in plants is available. In this study, ten-day hydroponic exposure was conducted to explore the influence of copper (Cu) on the bioaccumulation and biotransformation of polychlorinated biphenyls (PCBs) in intact young rice (Oryza sativa L.). Low dose of Cu (≤100 μmol/L) increased the accumulation of CB-61 in rice plants, while excess concentrations of Cu (>100 μmol/L) inhibited uptake and translocation of CB-61. Effect of Cu on the uptake of CB-61 was attributed to the Cu-triggered damage to the roots of rice plants. The presence of a moderate dose of Cu (50 μmol/L) enhanced the formation of hydroxylated polychlorinated biphenyls (OH-PCBs) and methoxylated polychlorinated biphenyls (MeO-PCBs), whereas excess concentrations of Cu (250 μmol/L) inhibited the metabolism of CB-61. The effect of Cu on the interconversion between 4'-OH-CB-61 and 4'-MeO-CB-61 was also concentration dependent: the biotransformation was promoted by a moderate concentration of Cu but inhibited by excess concentrations of Cu. The activities of Cytochrome P450 (CYP450) and S-adenosyl-l-methionine (SAM)-dependent methyltransferase in the roots of rice plants exposed to Cu and CB-61 or its derivatives were consistent with the pattern and trend of the metabolites observed in rice roots. These results could provide valuable insights into the interactions and combined effects of PCBs and heavy metals in plants.