Search

The application of novel meat sources to the production of traditional smoked premium ham was evaluated. Various feeding strategies were designed for 90 Duroc x (Duroc x Landrace) pigs. The experiment was conducted to investigate the effects on the quality of meat and smoked ham when supplementing the diet of slaughter pigs with linseed oil and rapeseed oil and with the addition of vitamin E. Proximate composition, pH, texture and colour parameters of the quadriceps femoris muscles (raw pork and pork ham) were determined. The multivariate analysis of these traits demonstrated that the 3% addition of linseed oil to pigs' diet caused a decrease in the fat content in meat, and in higher meat tenderness and protein content. Diet supplementation with 3% linseed oil caused a significant increase in the technological yield of ham production (20.3%), but only in products with high fat content (8.30%). Data allowed the authors to conclude that diet supplementation with 3% linseed oil, coupled with 100 mg vitamin E, is the best form of supplementing a diet for fatteners that are reared in compliance with the rigorous principles of the pork quality system. [ABSTRACT FROM AUTHOR]

The effects of β-glucan particle size and the ratios of β-glucan to flour on the physicochemical properties of wheat rolls were examined. A total of 100, 195 and 280 µm particles were analyzed with flour replacement from 0% to 20%. Wheat rolls made with the various particles and flour replacement levels were measured for rheology, yield and volume, texture, color, porosity, total dietary fiber (TDF) content and β-glucan content. All products had a smaller volume compared to the control, whereas the lightness was not significantly affected. Texture analysis indicated that the most favorable textural values were observed for the formulation involving the 195 μm β-glucan particles. Rolls with the same flour replacement level using the smaller particles had a higher share of TDF due to the greater surface of water evaporation. The main finding from the research was that the best results in most measured parameters were observed using 195 µm dietary fiber preparation. Thus, particle size reduction might be used to improve product properties but only to a certain extent because the load of micronized fiber weakens the structure, resulting in decreased product quality. [ABSTRACT FROM PUBLISHER]

Tenderness is the most important characteristic of meat, determining consumer approval. There are numerous methods of its improvement, although of diverse effectiveness. addition of vitamin D3 to the feed for a short period before slaughter (7–10 days) is one of the natural ways to enhance the tenderness. Vitamin D3 is responsible for Ca2+ mobilisation in serum and increase in activity of proteolytic enzymes belonging to calpains, which results in significant improvement of beef tenderness and reduction of ageing time. The use of vitamin D3 is an application tool determining tenderness improvement of beef with substantial reduction in processing costs. Moreover, shorter post mortem ageing process will exceed the retail display time, which will consequently reduce losses due to unsold meat being returned from shops to the manufacturers. Based on the results of studies conducted over the last 15 years, this paper presents the possibility and the effects of the use of vitamin D3 to improve beef tenderness.

Anthocyanins, a subclass of flavonoids known for their vibrant colors and health-promoting properties, are pivotal in the nutritional science and food industry. This review article delves into the analytical methodologies for anthocyanin detection and quantification in food matrices, comparing quantitative and topical techniques. Quantitative methods, including High-performance Liquid Chromatography (HPLC) and Mass Spectrometry (MS), offer precise quantification and profiling of individual anthocyanins but require sample destruction, limiting their use in continuous quality control. Topical approaches, such as Near-infrared Spectroscopy (NIR) and hyperspectral imaging, provide rapid, in situ analysis without compromising sample integrity, ideal for on-site food quality assessment. The review highlights the advancements in chromatographic techniques, particularly Ultra-high-performance Liquid Chromatography (UHPLC) coupled with modern detectors, enhancing resolution and speed in anthocyanin analysis. It also emphasizes the growing importance of topical techniques in the food industry for their efficiency and minimal sample preparation. By examining the strengths and limitations of both analytical realms, this article aims to shed light on current challenges and prospective advancements, providing insights into future research directions for improving anthocyanin analysis in foods.

Today, one of the most important challenges of ensuring the society's health is the prevention of civilization diseases. Most of them are associated with an imbalance between antioxidants and free radicals in the human body. Due to the need to increase the intake of antioxidants, opportunities are being studied to increase their consumption. Therefore, the aim of this study was to evaluate the influence of plant extracts of marigold ( Tagetes erecta spp.) (MEx) and perilla ( Perilla frutescens L.) (PEx) on selected qualitative properties of muffins. We studied the effects of the extracts in amounts of 1% (1), 3% (3), and 5% (5) on selected muffin characteristics, i.e., crust and crumb color, cooking yield, specific volume, and water activity, and changes in textural properties as well as sensory acceptance analysis. The level of crust lightness (L*) of muffins was lower than that of the control sample only for the samples with the PEx. For the crumb, the muffins with MEx and PEx were darker than the control sample. Fortification of muffins resulted in a concentration-dependent increase in antioxidant capacity. The PEx_3 and PEx_5 samples were rated highest in the sensory acceptance evaluation. The other quality attributes were similar to the control sample, indicating the validity of introducing extracts in the muffin recipe.

Modified atmosphere packaging and active packaging were combined to prolong the shelf life and quality of the clean label, gluten-free (GF), yeast-leavened cakes enriched in oat fiber preparation. Star anise, cinnamon bark, and clove essential oils were used as emitters of active substances. The following concentrations of gases were chosen: 0% CO 2 /100%/N 2 (MAP 1 ), 60% CO 2 /40% N 2 (MAP 2 ), and approx. 78% N 2 /21% O 2 /0.04% CO 2 (ATM). Microbiological and physicochemical analyses were conducted. GF cakes were stored for 14 days (analysis in 0, 7, and 14 days). The results showed a decrease in moisture content and lightness of crumb and an increase in hardness. EOs significantly ( p ≤ 0.05) slowed down the growth of microorganisms regardless of the type of gas mixture. However, the best bacteriostatic effect was in MAP 2 . The content of beta-glucan did not change throughout the storage time. Generally, the best results were obtained with the combination of MAP and active packaging-60% of CO 2 and 40% of N 2 -where cinnamon or clove essential oils were used.

More consumers are being diagnosed with celiac disease or diseases in which wheat products should be avoided. For this reason, it is important to increase the range of gluten-free products available. In this study, it was decided to optimize the technology for the creation of a muffin with β-glucan (BG) and pomegranate (PG), while establishing water share (WT), using the response surface methodology. It was shown that β-glucan and water had the most significant influence on specific volume and moisture ( p ≤ 0.001). However, the increase of hardness, color, and total phenolic content (TPC) was mainly influenced by the increase of pomegranate content ( p ≤ 0.01 for harness and color and p ≤ 0.001 for TPC). Consumers accepted products high in β-glucan more than high in pomegranate. Optimization ended with a composition that included 1.89% BG, 9.51% PG, and 77.87% WT. There were no significant differences between the model and the experimental sample, apart from higher consumer acceptability.

The aim of the study was to investigate the changes in the activity of antioxidant enzymes, i.e., superoxide dismutase (SOD), glutathione peroxidase (GPx) and glutathione reductase (GR), and 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging activity in ostrich meat, as influenced by various packaging systems and storage time under refrigeration. Three packaging methods were used: vacuum packaging (VP) and modified atmosphere packaging (MAP) in two combinations of gases, MAP1 (40% O 2 /40% CO 2 /20% N 2 ) and MAP2 (60% O 2 /30% CO 2 /10% N 2 ). Meat samples were taken from the M. ilifibularis (IF) muscles of eight ostriches in each treatment group. The meat samples were stored in a refrigerator in 2 °C and analyzed at days 0, 4, 8, 12 and 16. The lowest level of SOD activity during storage was observed in ostrich muscles packed in vacuum, as compared to MAP1 and MAP2. In turn, the highest increase in GPx activity was recorded in VP, especially up to day 8 of storage, when this parameter reached maximum value (54.37). GR increased up to the eighth day of storage in MAP1 and VP. Between the 12th and 16th days of storage, stabilization of the GR activity level was observed only in VP, while under MAP1, it further decreased. DPPH remained relatively stable until the eighth day of storage and after this period, a decrease in this parameter was recorded, reaching the lowest value on day 12 for all types of packaging systems.

The aim of this study was to evaluate the effect of the packaging system type on the physical characteristics and microbial changes in ostrich meat during refrigerated storage. The applied packaging systems were vacuum packaging (VP) and modified atmosphere packaging (MAP) using two combinations of gases: MAP1 (40% O 2 /40% CO 2 /20% N 2 ) and MAP2 (60% O 2 /30% CO 2 /10% N 2 ). Eight meat samples were obtained in three replicates for all parameters, except for pH, for which six replicates were obtained from the M. ilifibularis (IF) muscle, and were stored in a refrigerator at 2 °C and analyzed at 0, 4, 8, 12 and 16 days for the effect of packaging methods on physical meat quality. The initial pH (5.99) decreased at the end of the storage time for MAP1 to 5.81, whereas VP was stable from day 0 to 12 and increased up to 6.08 on day 16. Regarding meat color, the L* value increased during storage for MAP1 and MAP2 from 36.99 to 40.75 and 41.60, respectively, whereas it declined for VP to 34.22. The same tendencies were reported for redness (a*) and yellowness (b*). Drip loss was the lowest in MAP1 and highest in VP. The lowest total viable bacteria counts were identified in VP, as compared to MAP1 and MAP2.

The demand for new gluten-free (GF) products is still very crucial issue in food industry. There is also a need for bioactive compounds and natural alternatives for food additives. For now, not only providing structure without gluten is major challenge, but also high sensory acceptance and nutritional value are on the top. This study is focused on the effect of high-purity oat β-glucan as a structure-making agent on physicochemical and sensory properties of gluten-free yeast leavened cake. The response surface methodology (RSM) was used to set the design of the experiment. Water and oat β-glucan were chosen as independent variables. Enzymatic extraction was conducted in order to obtain pure oat β-glucan (approx. 85%). Physicochemical and microstructure analyses, and a consumer hedonic test were carried out to check the quality of the final product. As a last step, verification was undertaken to compare the predicted and experimental values of the results. The results showed that the optimisation process was crucial in obtaining high-quality, gluten-free yeast leavened cake. The optimised amounts of water and oat β-glucan were 66.12% and 2.63% respectively. This proves that the application of oat β-glucan to gluten-free products is possible and gives positive results in terms of texture, volume and sensory acceptance. Due to oat β-glucan's pro-health benefits, the final product can be seen as a functional alternative for common gluten-free products in the market., Competing Interests: Conflict of interestThe authors declare that they have no conflict of interest., (© The Author(s) 2020.)

The biggest challenge in the production of gluten-free baked products is creating a structure without gluten while maintaining physicochemical and sensory properties. The aim of this study was to evaluate the possibility of applying oat β-glucan as the thickening and structure-making agent instead of xanthan (control sample), due to its pro-health technological properties, in yeast-leavened gluten-free cake. Thus, high-in-β-glucan oat fibre powder was incorporated into cake formulations as 5, 10, 15 and 20% replacement of rice or corn flour. The complex analysis of physicochemical and sensory properties was conducted, where texture and rheological aspects were the most important. An analysis of the correlation between rheological and physical properties was also conducted. Corn and rice cakes differed, but the results showed the increase of β-glucan, total dietary fibre, springiness, cohesiveness, storage (G') and loss (G″) modulus and the decrease of firmness and lightness. Improvement of porosity and volume was also noticed. Significant correlation was observed among G', G″, specific volume and texture components. Accelerated texture changes were noticed after 24 h of storage. To sum up, it is justified to incorporate oat fibre into gluten-free baked products, both to increase nutritional value and improve cake structure.

The oil-in-water emulsion system is very common in food production. The aim of this study was the evaluation of extracted (enzymatic treatment) cereal β-glucan as a stabiliser in comparison to other commonly used food additives. Oat (OBG) and barley (BBG) β-glucan were applied at concentrations of 1%, 2% and 4%; gum guar, xanthan gum, hydroxypropyl methylcellulose at 0.5% each; lecithin at 2%; polyglycerol polyricinoleate at 4%; and, finally pectin at 3.2%. The following physical properties were examined: emulsion stability, foaming capacity and stability, droplet size distribution and viscosity. The results showed that cereal β-glucan reached very good emulsion stability (>80% after 14 days) and relatively high values of apparent viscosity (up to 12,243 cPa·s for 4% OBG, and 2264 cPa·s for 4% BBG; γ̇=20 1/s, day 14). The droplet size of barley β-glucan emulsion ranged between 14.88 and 60.06 μm, and of oat β-glucan emulsion between 15.68 and 46.22 μm. The results showed that cereal β-glucan acts like a viscosifier and can be applied in a variety of food products to improve their texture and viscosity., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Near-infrared spectroscopy is a known technique for assessing the quality of compounds found in food products. However, it is still not widely used for predicting physical properties of meat using the online system. This study aims to assess the possibility of application of a NIR equipped with fiber optic system as an online measurement system to predict Warner⁻Bratzler shear force (WBSF) value, cooking loss (CL), and color of longissimus lumborum muscle, depending on aging time. The prediction model satisfactorily estimated the WBSF on day 1 and day 7 of aging as well as a* color parameter on day one and CL on day 21. This could be explained by the fact that during beef aging, the physicochemical structure of meat becomes more uniform and less differentiation of raw data is observed. There is still a challenge to obtain a verifiable model for the prediction of physical properties, using NIR, by utilizing more varied raw data.

In this study, some dietary fiber (DF) sources were investigated as fortifiers of wheat bread: oat (OB), flax (FB), and apple (AB). Adding oat and flax fibers to bread significantly changed the fatty acid profiles. OB was highest in oleic acid (33.83% of lipids) and linoleic acid (24.31% of lipids). Only in FB, γ-linolenic fatty acid was present in a significant amount-18.32%. The bioaccessibility trails revealed that the DF slow down the intake of saturated fatty acids. PUFA were least bioaccessible from all fatty acids groups in the range of (72% in OB to 87% in FB). The control bread had the greatest value (80.5) and was significantly higher than values for OB, FB, and AB in terms of glycemic index. OB, FB and AB addition led to obtain low glycemic index. AB had a significant highest value of total phenolic (897.2 mg/kg) with the lowest values in FB (541.2 mg/kg). The only significant lowering of caloric values in this study was observed in AB. The study could address the gap in the area of research about taking into consideration glycemic index, fatty acid profile and phenolic content in parallel in terms of DF application in breads.

Overconsumption of sweets contributes to increasing obesity among children and adults. Functional food brings an opportunity to improve nutritional value of commonly eaten products, e.g., pastry products. New trends in the food industry tend to produce low-calorie products by replacing sugar or fat with additives having pro-health benefits. The aim of this study was to determine the effect of replacing sucrose with steviol glycosides (natural non-caloric sweetener) on the quality properties of bakery products. The analysis of muffin's texture, color, cooking yield, browning index, and sensory analysis were performed. The study showed that a 25% addition of steviol sweetener (as a sucrose replacement) was the most appropriate modification of the basic formula. The resulting muffins gained sensory attractiveness and health-promoting qualities. Moreover, the study showed that a reduction of sucrose in excess of 50% had a negative impact on the quality of muffins and their sensory profiles.

Changes of color, proportions of myoglobin forms, pH, Warner-Bratzler shear force (WBSF) of beef m. semimembranosus (SM) were examined during 21days of vacuum-aging. Significant changes in lightness, redness, yellowness, chroma, and hue angle (p≤0.05) of SM during aging were found. Proportions of myoglobin forms changed on the 7th day of aging. Aging decreased WBSF in general, but a significant decrease (p≤0.05) from 67.86N to 55.3N was observed after day 14 of aging. The color parameters (L*, a*, C, ΔE) and O2Mb in 21-day aged SM were stabilized faster during blooming. Beef SM that had faster stabilization of bright red color during blooming were more tender (correlation of O2Mb with WBSF r=-0.87; p≤0.001). This could be important information for the producers, since the best quality traits could be achieved after sufficient blooming and aging time., (Copyright © 2016. Published by Elsevier Ltd.)

In response to the growing interest of modern society in functional food products, this study attempts to develop a bakery product with high dietary fibre content added in the form of an oat fibre powder. Oat fibre powder with particle sizes of 75 µm (OFP1) and 150 µm (OFP2) was used, substituting 4, 8, 12, 16 and 20% of the flour. The physical properties of the dough and the final bakery products were then measured. Results indicated that dough with added fibre had higher elasticity than the control group. The storage modulus values of dough with OFP1 most closely approximated those of the control group. The addition of OFP1 did not affect significantly the colour compared to the other samples. Increasing the proportion of oat fibre powder resulted in increased firmness, which was most prominent in wheat bread rolls with oat fibre powder of smaller particle sizes. The addition of oat fibre powder with smaller particles resulted in a product with the rheological and colour parameters that more closely resembled control sample.