Search

We present measurements of site preference (SP) and bulk 15N/14N ratios (δ15NbulkN2O) of nitrous oxide (N2O) by quantum cascade laser absorption spectroscopy (QCLAS) as a powerful tool to investigate N2O production pathways in biological wastewater treatment. QCLAS enables high-precision N2O isotopomer analysis in real time. This allowed us to trace short-term fluctuations in SP and δ15NbulkN2O and, hence, microbial transformation pathways during individual batch experiments with activated sludge from a pilot-scale facility treating municipal wastewater. On the basis of previous work with microbial pure cultures, we demonstrate that N2O emitted during ammonia (NH4+) oxidation with a SP of −5.8 to 5.6 ‰ derives mostly from nitrite (NO2-) reduction (e.g., nitrifier denitrification), with a minor contribution from hydroxylamine (NH2OH) oxidation at the beginning of the experiments. SP of N2O produced under anoxic conditions was always positive (1.2 to 26.1 ‰), and SP values at the high end of this spectrum (24.9 to 26.1 ‰) are indicative of N2O reductase activity. The measured δ15NbulkN2O at the initiation of the NH4+ oxidation experiments ranged between −42.3 and −57.6 ‰ (corresponding to a nitrogen isotope effect Δδ15N = δ15Nsubstrate - δ15NbulkN2O of 43.5 to 58.8 ‰), which is considerably higher than under denitrifying conditions (δ15NbulkN2O 2.4 to −17 ‰; Δδ15N = 0.1 to 19.5 ‰). During the course of all NH4+ oxidation and nitrate (NO3-) reduction experiments, δ15NbulkN2O increased significantly, indicating net 15N enrichment in the dissolved inorganic nitrogen substrates (NH4+, NO3-) and transfer into the N2O pool. The decrease in δ15NbulkN2O during NO2- and NH2OH oxidation experiments is best explained by inverse fractionation during the oxidation of NO2- to NO3-. [ABSTRACT FROM AUTHOR]

Abstract: Nitrous oxide (N2O) is an important greenhouse gas and a major sink for stratospheric ozone. In biological wastewater treatment, microbial processes such as autotrophic nitrification and heterotrophic denitrification have been identified as major sources; however, the underlying pathways remain unclear. In this study, the mechanisms of N2O production were investigated in a laboratory batch-scale system with activated sludge for treating municipal wastewater. This relatively complex mixed population system is well representative for full-scale activated sludge treatment under nitrifying and denitrifying conditions. Under aerobic conditions, the addition of nitrite resulted in strongly nitrite-dependent N2O production, mainly by nitrifier denitrification of ammonia-oxidizing bacteria (AOB). Furthermore, N2O is produced via hydroxylamine oxidation, as has been shown by the addition of hydroxylamine. In both sets of experiments, N2O production was highest at the beginning of the experiment, then decreased continuously and ceased when the substrate (nitrite, hydroxylamine) had been completely consumed. In ammonia oxidation experiments, N2O peaked at the beginning of the experiment when the nitrite concentration was lowest. This indicates that N2O production via hydroxylamine oxidation is favored at high ammonia and low nitrite concentrations, and in combination with a high metabolic activity of ammonia-oxidizing bacteria (at 2 to 3 mgO2/l); the contribution of nitrifier denitrification by AOB increased at higher nitrite and lower ammonia concentrations towards the end of the experiment. Under anoxic conditions, nitrate reducing experiments confirmed that N2O emission is low under optimal growth conditions for heterotrophic denitrifiers (e.g. no oxygen input and no limitation of readily biodegradable organic carbon). However, N2O and nitric oxide (NO) production rates increased significantly in the presence of nitrite or low dissolved oxygen concentrations. [Copyright &y& Elsevier]

The objective of this research was to develop a mechanistic model for quantifying N2O emissions from activated sludge plants and demonstrate how this may be used to evaluate the effects of process configuration and diurnal loading patterns. The model describes the mechanistic link between the factors recognized to correlate positively with N2O emissions. The primary factors are the presence of ammonia and nitrite accumulation. Low dissolved oxygen concentrations also may be implicated through differential impacts on ammonia-oxidizing bacteria (AOB) versus nitrite-oxidizing bacteria (NOB) activity. Factors promoting N2O emissions at treatment plants are discussed below. The model was applied to data from laboratory and pilot-scale systems. From a practical standpoint, plant configuration (e.g., plug-flow versus complete-mix), influent loading patterns (and peak load), and certain operating strategies (e.g., handling of return streams) are all important in determining N2O emissions. [ABSTRACT FROM AUTHOR]

The article focuses on a study on the implementation of online nitrous oxide off-gas analysis for the process control of full-scale nitritation-anammox treatment. Nitrous oxide production is driven by ammonia-oxidizing bacteria. Long-term continuous nitrous oxide off-gas analysis is needed for the accurate recording of emission dynamics and levels of conventional wastewater treatment plants.

Nitrous oxide (N 2 O) emissions from wastewater treatment contribute significantly to greenhouse gas emissions. They have been shown to exhibit a strong seasonal and daily profile in previously conducted monitoring campaigns. However, only two year-long online monitoring campaigns have been published to date. Based on three monitoring campaigns on three full-scale wastewater treatment plants (WWTPs) with different activated sludge configurations, each of which lasted at least one year, we propose a refined monitoring strategy for long-term emission monitoring with multiple flux chambers on open tanks. Our monitoring campaigns confirm that the N 2 O emissions exhibited a strong seasonal profile and were substantial on all three plants (1-2.4% of the total nitrogen load). These results confirm that N 2 O is the most important greenhouse gas emission from wastewater treatment. The temporal variation was more distinct than the spatial variation within aeration tanks. Nevertheless, multiple monitoring spots along a single lane are crucial to assess representative emission factors in flow-through systems. Sequencing batch reactor systems were shown to exhibit comparable emissions within one reactor but significant variation between parallel reactors. The results indicate that considerable emission differences between lanes are to be expected in cases of inhomogeneous loading and discontinuous feeding. For example, N 2 O emission could be shown to depend on the amount of treated reject water: lanes without emitted <1% of the influent load, while parallel lanes emitted around 3%. In case of inhomogeneous loading, monitoring of multiple lanes is required. Our study enables robust planning of monitoring campaigns on WWTPs with open tanks. Extensive full-scale emission monitoring campaigns are important as a basis for reliable decisions about reducing the climate impact of wastewater treatment. More specifically, such data sets help us to define general emission factors for wastewater treatment plants and to construct and critically evaluate N 2 O emission models., (Copyright © 2019 Elsevier B.V. All rights reserved.)