Search

Accurate understanding and quantification of the risk to critical infrastructure posed by future large earthquakes continues to be a very challenging problem. Earthquake phenomena are quite complex and traditional approaches to predicting ground motions for future earthquake events have historically been empirically based whereby measured ground motion data from historical earthquakes are homogenized into a common data set and the ground motions for future postulated earthquakes are probabilistically derived based on the historical observations. This procedure has recognized significant limitations, principally due to the fact that earthquake ground motions tend to be dictated by the particular earthquake fault rupture and geologic conditions at a given site and are thus very site-specific. Historical earthquakes recorded at different locations are often only marginally representative. There has been strong and increasing interest in utilizing large-scale, physics-based regional simulations to advance the ability to accurately predict ground motions and associated infrastructure response. However, the computational requirements for simulations at frequencies of engineering interest have proven a major barrier to employing regional scale simulations. In a U.S. Department of Energy Exascale Computing Initiative project, the EQSIM application development is underway to create a framework for fault-to-structure simulations. This framework is being prepared to exploit emerging exascale platforms in order to overcome computational limitations. This article presents the essential methodology and computational workflow employed in EQSIM to couple regional-scale geophysics models with local soil-structure models to achieve a fully integrated, complete fault-to-structure simulation framework. The computational workflow, accuracy and performance of the coupling methodology are illustrated through example fault-to-structure simulations.

The hybrid cable-stayed suspension bridge is used to combine the advantages of cable-stayed and suspension bridges and hence has a broad prospect for application. The conventional simplified analytical models of the hybrid bridge are usually developed based on a schematic with the cable-stayed and suspension systems working separately without any overlapping zone, which cannot represent the modern hybrid bridge system. In this study, a novel analytical model is proposed based on the modified suspension–elastic foundation beam theory to estimate the mechanical performance and deflection of the hybrid bridge system with the consideration of the overlapped section between the suspension and stayed cables. The governing equations of the hybrid bridge system are developed based on the elastic foundation beam theory and the deflection theory, which are derived separately in the hybrid section, the pure suspension section and the cable-stayed section. The general solution of each section is presented. The Transfer Matrix Method is then employed to solve the unknowns from one end to the other, which are in turn used to solve the internal forces of the hybrid bridge system caused by the concentrated load. In addition, in view of no variation in the unstressed length of the main cable, the compatibility equation of the main cable is established with consideration of the longitudinal displacement of the main tower, which is used to derive the formulas for the internal force and deflection of the hybrid system. The model can be easily complied in any programming platform, such as Matlab, with simple input parameters, which can eliminate the complex finite element modeling process. Hence, it can be easily used in the preliminary design stage to determine the optimal size and layout of the bridge. Then, a case study is presented for the verification of the proposed model under a vertical load, which is simplified from the Xihoumen Bridge, a combined highway and railway bridge with a main span of 1488 m. Good agreement is obtained between the proposed model and the finite element method. Meanwhile, it is found that there exists a negative deflection zone for the main beam at a distance from the concentrated vertical load, which is mainly caused by the deflection of the main cables, leading to the cambering of the beam. [ABSTRACT FROM AUTHOR]

Interstory drift (ID) is a key response parameter for buildings subjected to lateral loads and is used to define performance-based limit states, allowable deformations and damage states in a number of seismic design codes and standards. An ability to rapidly and accurately measure both transient and residual ID during an earthquake would provide important observables for understanding the seismic demands and post-earthquake condition of a building. Accurate retrieval of ID from accelerometer-based instrumentation systems can be very challenging, if not impossible, as a result of instrumentation limitations and the post-processing associated with strong motion accelerometer data. This is particularly true for the case in which residual drifts occur during inelastic building response. In the study presented herein, a newly developed optical sensor system, designed specifically for directly measuring both transient and residual ID, was experimentally evaluated through shake table testing and computational simulations. The ability of the sensor to accurately measure ID is demonstrated and key operational considerations for sensor system deployment are examined through a model-based investigation.