Search

As IoT devices become widely, it is crucial to protect them from malicious intrusions. However, the data scarcity of IoT limits the applicability of traditional intrusion detection methods, which are highly data-dependent. To address this, in this paper we propose the Open-Set Dandelion Network (OSDN) based on unsupervised heterogeneous domain adaptation in an open-set manner. The OSDN model performs intrusion knowledge transfer from the knowledge-rich source network intrusion domain to facilitate more accurate intrusion detection for the data-scarce target IoT intrusion domain. Under the open-set setting, it can also detect newly-emerged target domain intrusions that are not observed in the source domain. To achieve this, the OSDN model forms the source domain into a dandelion-like feature space in which each intrusion category is compactly grouped and different intrusion categories are separated, i.e., simultaneously emphasising inter-category separability and intra-category compactness. The dandelion-based target membership mechanism then forms the target dandelion. Then, the dandelion angular separation mechanism achieves better inter-category separability, and the dandelion embedding alignment mechanism further aligns both dandelions in a finer manner. To promote intra-category compactness, the discriminating sampled dandelion mechanism is used. Assisted by the intrusion classifier trained using both known and generated unknown intrusion knowledge, a semantic dandelion correction mechanism emphasises easily-confused categories and guides better inter-category separability. Holistically, these mechanisms form the OSDN model that effectively performs intrusion knowledge transfer to benefit IoT intrusion detection. Comprehensive experiments on several intrusion datasets verify the effectiveness of the OSDN model, outperforming three state-of-the-art baseline methods by 16.9%., Comment: Accepted by ACM Transactions on Internet Technology

As Internet of Things devices become prevalent, using intrusion detection to protect IoT from malicious intrusions is of vital importance. However, the data scarcity of IoT hinders the effectiveness of traditional intrusion detection methods. To tackle this issue, in this paper, we propose the Adaptive Bi-Recommendation and Self-Improving Network (ABRSI) based on unsupervised heterogeneous domain adaptation (HDA). The ABRSI transfers enrich intrusion knowledge from a data-rich network intrusion source domain to facilitate effective intrusion detection for data-scarce IoT target domains. The ABRSI achieves fine-grained intrusion knowledge transfer via adaptive bi-recommendation matching. Matching the bi-recommendation interests of two recommender systems and the alignment of intrusion categories in the shared feature space form a mutual-benefit loop. Besides, the ABRSI uses a self-improving mechanism, autonomously improving the intrusion knowledge transfer from four ways. A hard pseudo label voting mechanism jointly considers recommender system decision and label relationship information to promote more accurate hard pseudo label assignment. To promote diversity and target data participation during intrusion knowledge transfer, target instances failing to be assigned with a hard pseudo label will be assigned with a probabilistic soft pseudo label, forming a hybrid pseudo-labelling strategy. Meanwhile, the ABRSI also makes soft pseudo-labels globally diverse and individually certain. Finally, an error knowledge learning mechanism is utilised to adversarially exploit factors that causes detection ambiguity and learns through both current and previous error knowledge, preventing error knowledge forgetfulness. Holistically, these mechanisms form the ABRSI model that boosts IoT intrusion detection accuracy via HDA-assisted intrusion knowledge transfer., Comment: Accepted by IEEE Internet of Things Journal

As the capacity of Solid-State Drives (SSDs) is constantly being optimised and boosted with gradually reduced cost, the SSD cluster is now widely deployed as part of the hybrid storage system in various scenarios such as cloud computing and big data processing. However, despite its rapid developments, the performance of the SSD cluster remains largely under-investigated, leaving its sub-optimal applications in reality. To address this issue, in this paper we conduct extensive empirical studies for a comprehensive understanding of the SSD cluster in diverse settings. To this end, we configure a real SSD cluster and gather the generated trace data based on some often-used benchmarks, then adopt analytical methods to analyse the performance of the SSD cluster with different configurations. In particular, regression models are built to provide better performance predictability under broader configurations, and the correlations between influential factors and performance metrics with respect to different numbers of nodes are investigated, which reveal the high scalability of the SSD cluster. Additionally, the cluster's network bandwidth is inspected to explain the performance bottleneck. Finally, the knowledge gained is summarised to benefit the SSD cluster deployment in practice., Comment: Accepted by Concurrency and Computation: Practice and Experience

Data scarcity hinders the usability of data-dependent algorithms when tackling IoT intrusion detection (IID). To address this, we utilise the data rich network intrusion detection (NID) domain to facilitate more accurate intrusion detection for IID domains. In this paper, a Geometric Graph Alignment (GGA) approach is leveraged to mask the geometric heterogeneities between domains for better intrusion knowledge transfer. Specifically, each intrusion domain is formulated as a graph where vertices and edges represent intrusion categories and category-wise interrelationships, respectively. The overall shape is preserved via a confused discriminator incapable to identify adjacency matrices between different intrusion domain graphs. A rotation avoidance mechanism and a centre point matching mechanism is used to avoid graph misalignment due to rotation and symmetry, respectively. Besides, category-wise semantic knowledge is transferred to act as vertex-level alignment. To exploit the target data, a pseudo-label election mechanism that jointly considers network prediction, geometric property and neighbourhood information is used to produce fine-grained pseudo-label assignment. Upon aligning the intrusion graphs geometrically from different granularities, the transferred intrusion knowledge can boost IID performance. Comprehensive experiments on several intrusion datasets demonstrate state-of-the-art performance of the GGA approach and validate the usefulness of GGA constituting components., Comment: Accepted by IEEE Internet of Things Journal

In this paper, we allocate IoT devices as resources for smart services with time-constrained resource requirements. The allocation method named as BRAD can work under multiple resource scenarios with diverse resource richnesses, availabilities and costs, such as the intelligent healthcare system deployed by Harbin Institute of Technology (HIT-IHC). The allocation aims for bimetric-balancing under the multi-scenario case, i.e., the profit and cost associated with service satisfaction are jointly optimised and balanced wisely. Besides, we abstract IoT devices as digital objects (DO) to make them easier to interact with during resource allocation. Considering that the problem is NP-Hard and the optimisation objective is not differentiable, we utilise Grey Wolf Optimisation (GWO) algorithm as the model optimiser. Specifically, we tackle the deficiencies of GWO and significantly improve its performance by introducing three new mechanisms to form the BRAD-GWA algorithm. Comprehensive experiments are conducted on realistic HIT-IHC IoT testbeds and several algorithms are compared, including the allocation method originally used by HIT-IHC system to verify the effectiveness of the BRAD-GWA. The BRAD-GWA achieves a 3.14 times and 29.6% objective reduction compared with the HIT-IHC and the original GWO algorithm, respectively., Comment: Accepted by IEEE HPCC 2022

In this paper, we propose a Joint Semantic Transfer Network (JSTN) towards effective intrusion detection for large-scale scarcely labelled IoT domain. As a multi-source heterogeneous domain adaptation (MS-HDA) method, the JSTN integrates a knowledge rich network intrusion (NI) domain and another small-scale IoT intrusion (II) domain as source domains, and preserves intrinsic semantic properties to assist target II domain intrusion detection. The JSTN jointly transfers the following three semantics to learn a domain-invariant and discriminative feature representation. The scenario semantic endows source NI and II domain with characteristics from each other to ease the knowledge transfer process via a confused domain discriminator and categorical distribution knowledge preservation. It also reduces the source-target discrepancy to make the shared feature space domain-invariant. Meanwhile, the weighted implicit semantic transfer boosts discriminability via a fine-grained knowledge preservation, which transfers the source categorical distribution to the target domain. The source-target divergence guides the importance weighting during knowledge preservation to reflect the degree of knowledge learning. Additionally, the hierarchical explicit semantic alignment performs centroid-level and representative-level alignment with the help of a geometric similarity-aware pseudo-label refiner, which exploits the value of unlabelled target II domain and explicitly aligns feature representations from a global and local perspective in a concentrated manner. Comprehensive experiments on various tasks verify the superiority of the JSTN against state-of-the-art comparing methods, on average a 10.3% of accuracy boost is achieved. The statistical soundness of each constituting component and the computational efficiency are also verified., Comment: Accepted by IEEE Internet of Things Journal

With the fast growing quantity of data generated by smart devices and the exponential surge of processing demand in the Internet of Things (IoT) era, the resource-rich cloud centres have been utilised to tackle these challenges. To relieve the burden on cloud centres, edge-cloud computation offloading becomes a promising solution since shortening the proximity between the data source and the computation by offloading computation tasks from the cloud to edge devices can improve performance and Quality of Service (QoS). Several optimisation models of edge-cloud computation offloading have been proposed that take computation costs and heterogeneous communication costs into account. However, several important factors are not jointly considered, such as heterogeneities of tasks, load balancing among nodes and the profit yielded by computation tasks, which lead to the profit and cost-oriented computation offloading optimisation model PECCO proposed in this paper. Considering that the model is hard in nature and the optimisation objective is not differentiable, we propose an improved Moth-flame optimiser PECCO-MFI which addresses some deficiencies of the original Moth-flame Optimiser and integrate it under the edge-cloud environment. Comprehensive experiments are conducted to verify the superior performance of the proposed method when optimising the proposed task offloading model under the edge-cloud environment., Comment: Accepted by Concurrency and Computation: Practice and Experience

A large volume of remote sensing (RS) data has been generated with the deployment of satellite technologies. The data facilitates research in ecological monitoring, land management and desertification, etc. The characteristics of RS data (e.g., enormous volume, large single-file size and demanding requirement of fault tolerance) make the Hadoop Distributed File System (HDFS) an ideal choice for RS data storage as it is efficient, scalable and equipped with a data replication mechanism for failure resilience. To use RS data, one of the most important techniques is geospatial indexing. However, the large data volume makes it time-consuming to efficiently construct and leverage. Considering that most modern geospatial data centres are equipped with HDFS-based big data processing infrastructures, deploying multiple geospatial indices becomes natural to optimise the efficacy. Moreover, because of the reliability introduced by high-quality hardware and the infrequently modified property of the RS data, the use of multi-indexing will not cause large overhead. Therefore, we design a framework called Multi-IndeXing-RS (MIX-RS) that unifies the multi-indexing mechanism on top of the HDFS with data replication enabled for both fault tolerance and geospatial indexing efficiency. Given the fault tolerance provided by the HDFS, RS data is structurally stored inside for faster geospatial indexing. Additionally, multi-indexing enhances efficiency. The proposed technique naturally sits on top of the HDFS to form a holistic framework without incurring severe overhead or sophisticated system implementation efforts. The MIX-RS framework is implemented and evaluated using real remote sensing data provided by the Chinese Academy of Sciences, demonstrating excellent geospatial indexing performance., Comment: Accepted by Tsinghua Science and Technology

As one of the most useful online processing techniques, the theta-join operation has been utilized by many applications to fully excavate the relationships between data streams in various scenarios. As such, constant research efforts have been put to optimize its performance in the distributed environment, which is typically characterized by reducing the number of Cartesian products as much as possible. In this article, we design and implement a novel fast theta-join algorithm, called Prefap, by developing two distinct techniques - prefiltering and amalgamated partitioning-based on the state-of-the-art FastThetaJoin algorithm to optimize the efficiency of the theta-join operation. Firstly, we develop a prefiltering strategy before data streams are partitioned to reduce the amount of data to be involved and benefit a more fine-grained partitioning. Secondly, to avoid the data streams being partitioned in a coarse-grained isolated manner and improve the quality of the partition-level filtering, we introduce an amalgamated partitioning mechanism that can amalgamate the partitioning boundaries of two data streams to assist a fine-grained partitioning. With the integration of these two techniques into the existing FastThetaJoin algorithm, we design and implement a new framework to achieve a decreased number of Cartesian products and a higher theta-join efficiency. By comparing with existing algorithms, FastThetaJoin in particular, we evaluate the performance of Prefap on both synthetic and real data streams from two-way to multiway theta-join to demonstrate its superiority., Comment: Accepted by Concurrency and Computation: Practice and Experience

Current research on DNA storage usually focuses on the improvement of storage density by developing effective encoding and decoding schemes while lacking the consideration on the uncertainty in ultra-long-term data storage and retention. Consequently, the current DNA storage systems are often not self-contained, implying that they have to resort to external tools for the restoration of the stored DNA data. This may result in high risks in data loss since the required tools might not be available due to the high uncertainty in far future. To address this issue, we propose in this paper a self-contained DNA storage system that can bring self-explanatory to its stored data without relying on any external tool. To this end, we design a specific DNA file format whereby a separate storage scheme is developed to reduce the data redundancy while an effective indexing is designed for random read operations to the stored data file. We verified through experimental data that the proposed self-contained and self-explanatory method can not only get rid of the reliance on external tools for data restoration but also minimise the data redundancy brought about when the amount of data to be stored reaches a certain scale., Comment: Accepted by Nature Scientific Reports

In this paper, we study a data caching problem in the cloud environment, where multiple frequently co-utilised data items could be packed as a single item being transferred to serve a sequence of data requests dynamically with reduced cost. To this end, we propose an online algorithm with respect to a homogeneous cost model, called PackCache, that can leverage the FP-Tree technique to mine those frequently co-utilised data items for packing whereby the incoming requests could be cost-effectively served online by exploiting the concept of anticipatory caching. We show the algorithm is 2\alpha competitive, reaching the lower bound of the competitive ratio for any deterministic online algorithm on the studied caching problem, and also time and space efficient to serve the requests. Finally, we evaluate the performance of the algorithm via experimental studies to show its actual cost-effectiveness and scalability., Comment: Accepted by IEEE Transactions on Computers

Over the past decades, researchers had put lots of effort investigating ranking techniques used to rank query results retrieved during information retrieval, or to rank the recommended products in recommender systems. In this project, we aim to investigate searching, ranking, as well as recommendation techniques to help to realize a university academia searching platform. Unlike the usual information retrieval scenarios where lots of ground truth ranking data is present, in our case, we have only limited ground truth knowledge regarding the academia ranking. For instance, given some search queries, we only know a few researchers who are highly relevant and thus should be ranked at the top, and for some other search queries, we have no knowledge about which researcher should be ranked at the top at all. The limited amount of ground truth data makes some of the conventional ranking techniques and evaluation metrics become infeasible, and this is a huge challenge we faced during this project. This project enhances the user's academia searching experience to a large extent, it helps to achieve an academic searching platform which includes researchers, publications and fields of study information, which will be beneficial not only to the university faculties but also to students' research experiences., Comment: Master thesis at the University of Melbourne

Heterogeneous domain adaptation (HDA) transfers knowledge across source and target domains that present heterogeneities e.g., distinct domain distributions and difference in feature type or dimension. Most previous HDA methods tackle this problem through learning a domain-invariant feature subspace to reduce the discrepancy between domains. However, the intrinsic semantic properties contained in data are under-explored in such alignment strategy, which is also indispensable to achieve promising adaptability. In this paper, we propose a Simultaneous Semantic Alignment Network (SSAN) to simultaneously exploit correlations among categories and align the centroids for each category across domains. In particular, we propose an implicit semantic correlation loss to transfer the correlation knowledge of source categorical prediction distributions to target domain. Meanwhile, by leveraging target pseudo-labels, a robust triplet-centroid alignment mechanism is explicitly applied to align feature representations for each category. Notably, a pseudo-label refinement procedure with geometric similarity involved is introduced to enhance the target pseudo-label assignment accuracy. Comprehensive experiments on various HDA tasks across text-to-image, image-to-image and text-to-text successfully validate the superiority of our SSAN against state-of-the-art HDA methods. The code is publicly available at https://github.com/BIT-DA/SSAN., Comment: Accepted at ACM MM 2020