Search

Liger is an adaptive optics (AO) fed imager and integral field spectrograph (IFS) designed to take advantage of the Keck All-sky Precision Adaptive-optics (KAPA) upgrade to the Keck I telescope. Liger adapts the design of the InfraRed Imaging Spectrograph (IRIS) for the Thirty Meter Telescope (TMT) to Keck by implementing a new imager and re-imaging optics. The performance of the imager is critical as it sequentially feeds the spectrograph and contains essential components such as the pupil wheel, filter wheel, and pupil viewing camera. We present the design and structural analysis of the Liger imager optical assembly including static, modal, and thermal simulations. We present the fabrication as well as the full assembly and characterization plan. The imager will be assembled bench-top in a clean room utilizing a coordinate-measuring machine (CMM) for warm alignment. To ensure optimal performance, the imager will be characterized in a test cryostat before integration with the full Liger instrument. This comprehensive approach to characterization ensures the precision and reliability of the imager, enhancing the observational capabilities of Liger and W.M. Keck Observatory.

Measurements of oxygen abundance throughout galaxies provide insight to the formation histories and ongoing processes. Here we present a study of the gas phase oxygen abundance in the HII regions and diffuse gas of the nearby starburst dwarf galaxy, IC 10. Using the Keck Cosmic Web Imager (KCWI) at W.M. Keck Observatory, we map the central region of IC 10 from 3500-5500A. The auroral [OIII]4363A line is detected with high signal-to-noise in 12 of 46 HII regions observed, allowing for direct measurement of the oxygen abundance, yielding a median and standard deviation of $\rm12+log(O/H)=8.37\pm0.25$. We investigate trends between these directly measured oxygen abundances and other HII region properties, finding weak negative correlations with the radius, velocity dispersion, and luminosity. We also find weak negative correlations between oxygen abundance and the derived quantities of turbulent pressure and ionized gas mass, and a moderate correlation with the derived dynamical mass. Strong line, $\rm R_{23}$ abundance estimates are used in the remainder of the HII regions and on a resolved spaxel-by-spaxel basis. There is a large offset between the abundances measured with $\rm R_{23}$ and the auroral line method. We find that the $\rm R_{23}$ method is unable to capture the large range of abundances observed via the auroral line measurements. The extent of this variation in measured abundances further indicates a poorly mixed interstellar medium (ISM) in IC 10, which is not typical of dwarf galaxies and may be partly due to the ongoing starburst, accretion of pristine gas, or a late stage merger., Comment: 20 pages, 9 figures, accepted for publication in AJ

We present results from the ``Quasar hosts Unveiled by high Angular Resolution Techniques" (QUART) survey studying the Circumgalactic Medium (CGM) by observing rest-frame UV emission lines Ly$\alpha$, C IV and He II around two radio-loud quasars, 3C 9 (z=2.02) and 4C 05.84 (z=2.32), using Keck Cosmic Web Imager (KCWI). We detect large-scale Ly$\alpha$ nebulae around both quasars with projected diameters $\sim$ 100 kpc, with spatially resolved, embedded 15-30 kpc He II and C IV nebulae around both quasars as well as kinematically distinct He II and C IV nebulae at a physical separation of $\sim$ 15 kpc from both quasars. Observations of H$\alpha$, H$\beta$, and [O III] emission using Keck MOSFIRE spectroscopically confirm that the Ly$\alpha$ nebulae extend to companion galaxies and that these quasars are in a protogroup/protocluster environment. We confirm that the He II and C IV emission is kinematically and spatially coincident with the companion galaxies. We estimate the virial masses of the companion galaxies, their metallicities, and star formation rates, and investigate the sources of ionization. We measure the dynamical mass of the host dark matter halos and estimate that the dark matter halos of these systems will grow to a mass of 2 $\times 10^{14}$ M$_{\odot}$ (3C 9) and 2 $\times 10^{13}$ M$_{\odot}$ (4C 05.84) by z=0. The combined CGM and companion galaxies observations indicate Ly$\alpha$ substructure can indicate the presence of companion galaxies in the CGM.

The Panoramic Search for Extraterrestrial Intelligence (PANOSETI) experiment is designed to detect pulsed optical signals on nanosecond timescales. PANOSETI is therefore sensitive to Cherenkov radiation generated by extensive air showers, and can be used for gamma-ray astronomy. Each PANOSETI telescope uses a 0.5 m Fresnel lens to focus light onto a 1024 pixel silicon photomultiplier camera that images a 9.9$^\circ\times$9.9$^\circ$ square field of view. Recent detections of PeV gamma-rays from extended sources in the Galactic Plane motivate constructing an array with effective area and angular resolution surpassing current observatories. The PANOSETI telescopes are much smaller and far more affordable than traditional imaging atmospheric Cherenkov telescopes (IACT), making them ideal instruments to construct such an array. We present the results of coincident observations between two PANOSETI telescopes and the gamma-ray observatory VERITAS, along with simulations characterizing the performance of a PANOSETI IACT array., Comment: 8 pages, 5 figures, Proceedings for the 38th International Cosmic Ray Conference (ICRC2023) in Nagoya Japan, Jul 26 - Aug 3, 2023

We present Keck Cosmic Web Imager (KCWI) integral field spectroscopy (IFS) observations of rest-frame UV emission lines $\rm Ly\alpha$, C IV $\lambda \lambda$ 1548 \AA, 1550\AA and He II 1640 \AA observed in the circumgalactic medium (CGM) of two $z=2$ radio-loud quasar host galaxies. We detect extended emission on 80-90 kpc scale in $\rm Ly\alpha$ in both systems with C IV, and He II emission also detected out to 30-50 kpc. All emission lines show kinematics with a blue and redshifted gradient pattern consistent with velocities seen in massive dark matter halos and similar to kinematic patterns of inflowing gas seen in hydrodynamical simulations. Using the kinematics of both resolved $\rm Ly\alpha$ emission and absorption, we can confirm that both kinematic structures are associated with accretion. Combining the KCWI data with molecular gas observations with Atacama Large Millimeter/submillimeter Array (ALMA) and high spatial resolution of ionized gas with Keck OSIRIS, we find that both quasar host galaxies reside in proto-group environments at $z=2$. We estimate $1-6\times10^{10}$M$_\odot$ of warm-ionized gas within 30-50 kpc from the quasar that is likely accreting onto the galaxy group. We estimate inflow rates of 60-200 M$_\odot$yr$^{-1}$, within an order of magnitude of the outflow rates in these systems. In the 4C 09.17 system, we detect narrow gas streams associated with satellite galaxies, potentially reminiscent of ram-pressure stripping seen in local galaxy groups and clusters. We find that the quasar host galaxies reside in dynamically complex environments, with ongoing mergers, gas accretion, ISM stripping, and outflows likely playing an important role in shaping the assembly and evolution of massive galaxies at cosmic noon., Comment: 24 pages, 11 figures, 6 tabes. Accepted for publication in MNRAS

Optical SETI (Search for Extraterrestrial Intelligence) instruments that can explore the very fast time domain, especially with large sky coverage, offer an opportunity for new discoveries that can complement multimessenger and time domain astrophysics. The Panoramic SETI experiment (PANOSETI) aims to observe optical transients with nanosecond to second duration over a wide field-of-view ($\thicksim$2,500 sq.deg.) by using two assemblies of tens of telescopes to reject spurious signals by coincidence detection. Three PANOSETI telescopes, connected to a White Rabbit timing network used to synchronize clocks at the nanosecond level, have been deployed at Lick Observatory on two sites separated by a distance of 677 meters to distinguish nearby light sources (such as Cherenkov light from particle showers in the Earth's atmosphere) from astrophysical sources at large distances. In parallel to this deployment, we present results obtained during four nights of simultaneous observations with the four 12-meter VERITAS gamma-ray telescopes and two PANOSETI telescopes at the Fred Lawrence Whipple Observatory. We report PANOSETI's first detection of astrophysical gamma rays, comprising three events with energies in the range between $\thicksim$15 TeV and $\thicksim$50 TeV. These were emitted by the Crab Nebula, and identified as gamma rays using joint VERITAS observations., Comment: 9 pages, 5 figures, SPIE Astronomical Telescopes + Instrumentation conference, 2022, Montr\'eal, Qu\'ebec, Canada

Liger is a next-generation near-infrared imager and integral field spectrograph (IFS) planned for the W.M. Keck Observatory. Liger is designed to take advantage of improved adaptive optics (AO) from the Keck All-Sky Precision Adaptive Optics (KAPA) upgrade currently underway. Liger operates at 0.84-2.45 $\mu$m with spectral resolving powers of R$\sim$4,000-10,000. Liger makes use of a sequential imager and spectrograph design allowing for simultaneous observations. There are two spectrograph modes: a lenslet with high spatial sampling of 14 and 31 mas, and a slicer with 75 and 150 mas sampling with an expanded field of view. Two pick-off mirrors near the imager detector direct light to these two IFS channels. We present the design and structural analysis for the imager detector and IFS pick-off mirror mounting assembly that will be used to align and maintain stability throughout its operation. A piezoelectric actuator will be used to step through $\rm3\,mm$ of travel during alignment of the instrument to determine the optimal focus for both the detector and pick-off mirrors which will be locked in place during normal operation. We will demonstrate that the design can withstand the required gravitational and shipping loads and can be aligned within the positioning tolerances for the optics., Comment: 10 pages, 7 figures, 3 tables

Liger is a second generation near-infrared imager and integral field spectrograph (IFS) for the W. M. Keck Observatory that will utilize the capabilities of the Keck All-sky Precision Adaptive-optics (KAPA) system. Liger operates at a wavelength range of 0.81 {\mu}m - 2.45 {\mu}m and utilizes a slicer and a lenslet array IFS with varying spatial plate scales and fields of view resulting in hundreds of modes available to the astronomer. Because of the high level of complexity in the raw data formats for the slicer and lenslet IFS modes, Liger must be designed in conjunction with a Data Reduction System (DRS) which will reduce data from the instrument in real-time and deliver science-ready data products to the observer. The DRS will reduce raw imager and IFS frames from the readout system and provide 2D and 3D data products via custom quick-look visualization tools suited to the presentation of IFS data. The DRS will provide the reduced data to the Keck Observatory Archive (KOA) and will be available to astronomers for offline post-processing of observer data. We present an initial design for the DRS and define the interfaces between observatory and instrument software systems., Comment: 12 pages, 4 figures, 2 tables

Liger is an adaptive optics (AO) fed imager and integral field spectrograph (IFS) designed to take advantage of the Keck All-sky Precision Adaptive-optics (KAPA) upgrade for the W.M. Keck Observatory. We present the design and analysis of the imager optical assembly including the spectrograph Re-Imaging Optics (RIO) which transfers the beam path from the imager focal plane to the IFS slicer module and lenslet array. Each imager component and the first two RIO mechanisms are assembled and individually aligned on the same optical plate. Baffling suppresses background radiation and scattered light, and a pupil viewing camera allows the imager detector to focus on an image of the telescope pupil. The optical plate mounts on an adapter frame for alignment of the overall system. The imager and RIO will be characterized in a cryogenic test chamber before installation in the final science cryostat., Comment: 8 pages, 5 figures

We present a survey of the central region of the nearest starburst galaxy, IC 10, using the W. M. Keck Observatory Keck Cosmic Web Imager (KCWI) at high spectral and spatial resolution. We map the central starburst of IC 10 to sample the kinematic and ionization properties of the individual star-forming regions. Using the low spectral resolution mode of KCWI we map the oxygen abundance and with the high spectral resolution mode we identify 46 individual H II regions. These H II regions have an average radius of 4.0 pc, star formation rate $\sim1.3\times10^{-4}$ M$_\odot$ yr$^{-1}$, and velocity dispersion $\sim$16 km s$^{-1}$. None of the H II regions appear to be virialized ($\rm \alpha_{vir}>>1$), and, on average, they show evidence of ongoing expansion. IC 10's H II regions are offset from the star forming region size-luminosity scaling relationships, as well as Larson's Law that relates size and velocity dispersion. We investigate the balance of inward and outward pressure, $\rm P_{in}$ and $\rm P_{out}$, finding $\rm P_{out}>P_{in}$ in 89% of H II regions, indicating feedback driven expansion even in these low mass H II regions. We find warm gas pressure ($\rm P_{gas}$) provides the dominant contribution to the outward pressure ($\rm P_{out}$). This counteracts the inward pressure which is dominated by turbulence in the surrounding gas rather than self-gravity. Five H II regions show evidence of outflows which are most likely supported by either stellar winds (2 regions) or champagne flows (3 regions). These observations provide new insights into the state of the star-forming regions in IC 10 and negative feedback from low mass clusters., Comment: 57 pages, 35 figures, 9 tables, accepted for publication in The Astrophysical Journal

PANOSETI (Pulsed All-Sky Near-infrared Optical Search for Extra Terrestrial Intelligence) is a dedicated SETI (Search for Extraterrestrial Intelligence) observatory that is being designed to observe 4,441 sq. deg. to search for nano- to milli-second transient events. The experiment will have a dual observatory system that has a total of 90 identical optical 0.48 m telescopes that each have a 99 square degree field of view. The two observatory sites will be separated by 1 km distance to help eliminate false positives and register a definitive signal. We discuss the overall mechanical design of the telescope modules which includes a Fresnel lens housing, a shutter, three baffles, an 32x32 array of Hamamatsu Multi-Photon Pixel Counting (MPPC) detectors that reside on a linear stage for focusing. Each telescope module will be housed in a triangle of a 3rd tessellation frequency geodesic dome that has the ability to have directional adjustment to correct for manufacturing tolerances and astrometric alignment to the second observatory site. Each observatory will have an enclosure to protect the experiment, and an observatory room for operations and electronics. We will review the overall design of the geodesic domes and mechanical telescope attachments, as well as the overall cabling and observatory infrastructure layout., Comment: 11 pages, 10 figures, SPIE 2020

The PANOSETI experiment is an all-sky, all-the-time visible search for nanosecond to millisecond time-scale transients. The experiment will deploy observatory domes at several sites, each dome containing ~45 telescopes and covering ~4,440 square degrees. Here we describe the focal-plane electronics for the visible wavelength telescopes, each of which contains a Mother Board and four Quadrant Boards. On each quadrant board, 256 silicon photomultiplier (SiPM) photon detectors are arranged to measure pulse heights to search for nanosecond time-scale pulses. To simultaneously examine pulse widths over a large range of time scales (nanoseconds to milliseconds), the instrument implements both a Continuous Imaging Mode (CI-Mode) and a Pulse Height Mode (PH-Mode). Precise timing is implemented in the gateware with the White Rabbit protocol., Comment: 12 pages, 16 figures, SPIE Astronomical Telescopes + Instrumentation, 2020

We present Atacama Large Millimeter/submillimeter Array (ALMA) observations of six radio-loud quasar host galaxies at $z=1.4-2.3$. We combine the kpc-scale resolution ALMA observations with high spatial-resolution adaptive optics integral field spectrograph data of the ionized gas. We detect molecular gas emission in five quasar host galaxies and resolve the molecular interstellar medium using the CO (3-2) or CO (4-3) rotational transitions. Clumpy molecular outflows are detected in four quasar host galaxies and in a merger system 21 kpc away from one quasar. Between the ionized and cold-molecular gas phases, the majority of the outflowing mass is in a molecular phase, while for three out of four detected multi-phase gas outflows, the majority of the kinetic luminosity and momentum flux is in the ionized phase. Combining the energetics of the multi-phase outflows, we find that their driving mechanism is consistent with energy-conserving shocks produced by the impact of the quasar jets with the gas in the galaxy. By assessing the molecular gas mass to the dynamics of the outflows, we estimate a molecular gas depletion time scale of a few Myr. The gas outflow rates exceed the star formation rates, suggesting that quasar feedback is a major mechanism of gas depletion at the present time. The coupling efficiency between the kinetic luminosity of the outflows and the bolometric luminosity of the quasar of 0.1-1% is consistent with theoretical predictions. Studying multi-phase gas outflows at high redshift is important for quantifying the impact of negative feedback in shaping the evolution of massive galaxies., Comment: 23 pages, 8 figures, 6 tabes. Accepted for publication in ApJ

The InfraRed Imaging Spectrograph (IRIS) is the first-light client instrument for the Narrow Field Infrared Adaptive Optics System (NFIRAOS) on the Thirty Meter Telescope (TMT). Now approaching the end of its final design phase, we provide an overview of the instrument control software. The design is challenging since IRIS has interfaces with many systems at different stages of development (e.g., NFIRAOS, telescope control system, observatory sequencers), and will be built using the newly-developed TMT Common Software (CSW), which provides framework code (Java/Scala), and services (e.g., commands, telemetry). Lower-level software will be written in a combination of Java and C/C++ to communicate with hardware, such as motion controllers and infrared detectors. The overall architecture and philosophy of the IRIS software is presented, as well as a summary of the individual software components and their interactions with other systems., Comment: 20 pages, 9 figures, SPIE (2020) 11452-28

We present observations of ionized gas outflows in eleven z$ =1.39-2.59$ radio-loud quasar host galaxies. Data was taken with the integral field spectrograph (IFS) OSIRIS and the adaptive optics system at the W.M. Keck Observatory targeting nebular emission lines (H$\beta$, [OIII], H$\alpha$, [NII] and [SII]) redshifted into the near-infrared (1-2.4 \micron). Outflows with velocities of 500 - 1700 km\,s$^{-1}$ are detected in 10 systems on scales ranging from $<1$ kpc to 10 kpc with outflow rates from 8-2400 M$_\odot$yr$^{-1}$. For five sources, the outflow momentum rates are 4-80 times $L_{AGN}$/c, consistent with outflows being driven by an energy conserving shock. The five other outflows are either driven by radiation pressure or an isothermal shock. The outflows are the dominant source of gas depletion, and we find no evidence for star formation along the outflow paths. For eight objects, the outflow paths are consistent with the orientation of the jets. Yet, given the calculated pressures, we find no evidence of the jets currently doing work on these galactic-scale ionized outflows. We find that galactic-scale feedback occurs well before galaxies establish a substantial fraction of their stellar mass, as expected from local scaling relationships., Comment: 39 pages, 18 figures, 7 tables, accepted for publication in ApJ

Liger is a next-generation near-infrared imager and integral field spectrograph (IFS) for the W.M. Keck Observatory designed to take advantage of the Keck All-Sky Precision Adaptive Optics (KAPA) upgrade. Liger will operate at spectral resolving powers between R$\sim$4,000 - 10,000 over a wavelength range of 0.8-2.4$\mu$m. Liger takes advantage of a sequential imager and spectrograph design that allows for simultaneous observations between the two channels using the same filter wheel and cold pupil stop. We present the design for the filter wheels and pupil mask and their location and tolerances in the optical design. The filter mechanism is a multi-wheel design drawing from the heritage of the current Keck/OSIRIS imager single wheel design. The Liger multi-wheel configuration is designed to allow future upgrades to the number and range of filters throughout the life of the instrument. The pupil mechanism is designed to be similarly upgradeable with the option to add multiple pupil mask options. A smaller wheel mechanism allows the user to select the desired pupil mask with open slots being designed in for future upgrade capabilities. An ideal pupil would match the shape of the image formed of the primary and would track its rotation. For different pupil shapes without tracking we model the additional exposure time needed to achieve the same signal to noise of an ideal pupil and determine that a set of fixed masks of different shapes provides a mechanically simpler system with little compromise in performance., Comment: 9 pages, 7 figures, 1 table

Liger is a next generation adaptive optics (AO) fed integral field spectrograph (IFS) and imager for the W. M. Keck Observatory. This new instrument is being designed to take advantage of the upgraded AO system provided by Keck All-Sky Precision Adaptive-optics (KAPA). Liger will provide higher spectral resolving power (R$\sim$4,000-10,000), wider wavelength coverage ($\sim$0.8-2.4 $\mu$m), and larger fields of view than any current IFS. We present the design and analysis for a custom-made dewar chamber for characterizing the Liger opto-mechanical system. This dewar chamber is designed to test and assemble the Liger imaging camera and slicer IFS components while being adaptable for future experiments. The vacuum chamber will operate below $10^{-5}$ Torr with a cold shield that will be kept below 90 K. The dewar test chamber will be mounted to an optical vibration isolation platform and further isolated from the cryogenic and vacuum systems with bellows. The cold head and vacuums will be mounted to a custom cart that will also house the electronics and computer that interface with the experiment. This test chamber will provide an efficient means of calibrating and characterizing the Liger instrument and performing future experiments., Comment: 8 pages, 6 figures

The InfraRed Imaging Spectrograph (IRIS) is a first-light instrument for the Thirty Meter Telescope (TMT) that will be used to sample the corrected adaptive optics field by the Narrow-Field Infrared Adaptive Optics System (NFIRAOS) with a near-infrared (0.8 - 2.4 $\mu$m) imaging camera and integral field spectrograph. To better understand IRIS science specifications we use the IRIS data simulator to characterize relative photometric precision and accuracy across the IRIS imaging camera 34"x34" field of view. Because the Point Spread Function (PSF) varies due to the effects of anisoplanatism, we use the Anisoplanatic and Instrumental Reconstruction of Off-axis PSFs for AO (AIROPA) software package to conduct photometric measurements on simulated frames using PSF-fitting as the PSF varies in single-source, binary, and crowded field use cases. We report photometric performance of the imaging camera as a function of the instrumental noise properties including dark current and read noise. Using the same methods, we conduct comparisons of photometric performance with reconstructed PSFs, in order to test the veracity of the current PSF-Reconstruction algorithms for IRIS/TMT., Comment: SPIE 2020, 16 pages, 10 figures, 4 tables

We present detailed observations of photoionization conditions and galaxy kinematics in eleven z$=1.39-2.59$ radio-loud quasar host galaxies. Data was taken with OSIRIS integral field spectrograph (IFS) and the adaptive optics system at the W.M. Keck Observatory that targeted nebular emission lines (H$\beta$,[OIII],H$\alpha$,[NII]) redshifted into the near-infrared (1-2.4 \micron). We detect extended ionized emission on scales ranging from 1-30 kpc photoionized by stars, shocks, and active galactic nuclei (AGN). Spatially resolved emission-line ratios indicate that our systems reside off the star formation and AGN-mixing sequence on the Baldwin, Phillips $\&$ Terlevich (BPT) diagram at low redshift. The dominant cause of the difference between line ratios of low redshift galaxies and our sample is due to lower gas-phase metallicities, which are 2-5$\times$ less compared to galaxies with AGN in the nearby Universe. Using gas velocity dispersion as a proxy to stellar velocity dispersion and dynamical mass measurement through inclined disk modeling we find that the quasar host galaxies are under-massive relative to their central supermassive black hole (SMBH) mass, with all systems residing off the local scaling ($M_{\bullet}-\sigma~$,$M_{\bullet}-M_{*}~$) relationship. These quasar host galaxies require substantial growth, up to an order of magnitude in stellar mass, to grow into present-day massive elliptical galaxies. Combining these results with part I of our sample paper (Vayner et al. 2021) we find evidence for winds capable of causing feedback before the AGN host galaxies land on the local scaling relation between black hole and galaxy stellar mass, and before the enrichment of the ISM to a level observed in local galaxies with AGN., Comment: 31 pages, 18 figures, 7 tables. Accepted for publication in ApJ

Quasar-driven outflows must have made their most significant impact on galaxy formation during the epoch when massive galaxies were forming most rapidly. To study the impact of quasar feedback we conducted rest-frame optical integral field spectrograph (IFS) observations of three extremely red quasars (ERQs) and one type-2 quasar at $z=2-3$, obtained with the NIFS and OSIRIS instruments at the Gemini North and W. M. Keck Observatory with the assistance of laser-guided adaptive optics. We use the kinematics and morphologies of the [OIII] 5007\AA and H$\alpha$ 6563\AA emission lines redshifted into the near-infrared to gauge the extents, kinetic energies and momentum fluxes of the ionized outflows in the quasars host galaxies. For the ERQs, the galactic-scale outflows are likely driven by radiation pressure in a high column density environment or due to an adiabatic shock. For the type-2 quasar, the outflow is driven by radiation pressure in a low column density environment or due to a radiative shock. The outflows in the ERQs carry a significant amount of energy ranging from 0.05-5$\%$ of the quasar's bolometric luminosity, powerful enough to have a significant impact on the quasar host galaxies. However, the outflows are likely only impacting the inner few kpc of each host galaxy. The observed outflow sizes are generally smaller than other ionized outflows observed at high redshift. The high ratio between the momentum flux of the ionized outflow and the photon momentum flux from the quasar accretion disk and high nuclear obscuration makes these ERQs great candidates for transitional objects where the outflows are likely responsible for clearing material in the inner regions of each galaxy, unveiling the quasar accretion disk at optical wavelengths., Comment: 18 Pages, 12 figures, 2 tabes, published in MNRAS

We present detector characterization of a state-of-the-art near-infrared (950nm - 1650 nm) Discrete Avalanche Photodiode detector (NIRDAPD) 5x5 array. We designed an experimental setup to characterize the NIRDAPD dark count rate, photon detection efficiency (PDE), and non-linearity. The NIRDAPD array was illuminated using a 1050 nm light-emitting diode (LED) as well as 980 nm, 1310 nm, and 1550 nm laser diodes. We find a dark count rate of 3.3x10$^6$ cps, saturation at 1.2x10$^8$ photons per second, a photon detection efficiency of 14.8% at 1050 nm, and pulse detection at 1 GHz. We characterized this NIRDAPD array for a future astrophysical program that will search for technosignatures and other fast (>1 Ghz) astrophysical transients as part of the Pulsed All-sky Near-infrared Optical Search for Extraterrestrial Intelligence (PANOSETI) project. The PANOSETI program will consist of an all-sky optical (350 - 800 nm) observatory capable of observing the entire northern hemisphere instantaneously and a wide-field NIR (950 - 1650 nm) component capable of drift scanning the entire sky in 230 clear nights. PANOSETI aims to be the first wide-field fast-time response near-infrared transient search., Comment: 8 pages, 7 figures, 1 table

OSIRIS is a near-infrared (1.0--2.4 $\mu$m) integral field spectrograph operating behind the adaptive optics system at Keck Observatory, and is one of the first lenslet-based integral field spectrographs. Since its commissioning in 2005, it has been a productive instrument, producing nearly half the laser guide star adaptive optics (LGS AO) papers on Keck. The complexity of its raw data format necessitated a custom data reduction pipeline (DRP) delivered with the instrument in order to iteratively assign flux in overlapping spectra to the proper spatial and spectral locations in a data cube. Other than bug fixes and updates required for hardware upgrades, the bulk of the DRP has not been updated since initial instrument commissioning. We report on the first major comprehensive characterization of the DRP using on-sky and calibration data. We also detail improvements to the DRP including characterization of the flux assignment algorithm; exploration of spatial rippling in the reduced data cubes; and improvements to several calibration files, including the rectification matrix, the bad pixel mask, and the wavelength solution. We present lessons learned from over a decade of OSIRIS data reduction that are relevant to the next generation of integral field spectrograph hardware and data reduction software design., Comment: 18 pages, 16 figures; accepted for publication in AJ

We investigate star forming scaling relations using Bayesian inference on a comprehensive data sample of low- (z<0.1) and high-redshift (1

The InfraRed Imaging Spectrograph (IRIS) is a first-light instrument for the Thirty Meter Telescope (TMT) that will be used to sample the corrected adaptive optics field by NFIRAOS with a near-infrared (0.8 - 2.4 $\mu$m) imaging camera and Integral Field Spectrograph (IFS). In order to understand the science case specifications of the IRIS instrument, we use the IRIS data simulator to characterize photometric precision and accuracy of the IRIS imager. We present the results of investigation into the effects of potential ghosting in the IRIS optical design. Each source in the IRIS imager field of view results in ghost images on the detector from IRIS's wedge filters, entrance window, and Atmospheric Dispersion Corrector (ADC) prism. We incorporated each of these ghosts into the IRIS simulator by simulating an appropriate magnitude point source at a specified pixel distance, and for the case of the extended ghosts redistributing flux evenly over the area specified by IRIS's optical design. We simulate the ghosting impact on the photometric capabilities, and found that ghosts generally contribute negligible effects on the flux counts for point sources except for extreme cases where ghosts coalign with a star of $\Delta$m$>$2 fainter than the ghost source. Lastly, we explore the photometric precision and accuracy for single sources and crowded field photometry on the IRIS imager., Comment: SPIE 2018, 14 pages, 14 figures, 4 tables, Proceedings of SPIE 10702-373, Ground-based and Airborne Instrumentation for Astronomy VII, 10702A7 (16 July 2018)

The InfraRed Imaging Spectrograph (IRIS) is the first-light client instrument for the Narrow Field Infrared Adaptive Optics System (NFIRAOS) on the Thirty Meter Telescope (TMT). IRIS includes three natural guide star (NGS) On-Instrument Wavefront Sensors (OIWFS) to measure tip/tilt and focus errors in the instrument focal plane. NFIRAOS also has an internal natural guide star wavefront sensor, and IRIS and NFIRAOS must precisely coordinate the motions of their wavefront sensor positioners to track the locations of NGSs while the telescope is dithering (offsetting the telescope to cover more area), to avoid a costly re-acquisition time penalty. First, we present an overview of the sequencing strategy for all of the involved subsystems. We then predict the motion of the telescope during dithers based on finite-element models provided by TMT, and finally analyze latency and jitter issues affecting the propagation of position demands from the telescope control system to individual motor controllers., Comment: 21 pages, 19 figures, SPIE (2018) 10707-49

Infrared Imaging Spectrograph (IRIS) is the first light instrument for the Thirty Meter Telescope (TMT) that consists of a near-infrared (0.84 to 2.4 micron) imager and integral field spectrograph (IFS) which operates at the diffraction-limit utilizing the Narrow-Field Infrared Adaptive Optics System (NFIRAOS). The imager will have a 34 arcsec x 34 arcsec field of view with 4 milliarcsecond (mas) pixels. The IFS consists of a lenslet array and slicer, enabling four plate scales from 4 mas to 50 mas, multiple gratings and filters, which in turn will operate hundreds of individual modes. IRIS, operating in concert with NFIRAOS will pose many challenges for the data reduction system (DRS). Here we present the updated design of the real-time and post-processing DRS. The DRS will support two modes of operation of IRIS: (1) writing the raw readouts sent from the detectors and performing the sampling on all of the readouts for a given exposure to create a raw science frame; and (2) reduction of data from the imager, lenslet array and slicer IFS. IRIS is planning to save the raw readouts for a given exposure to enable sophisticated processing capabilities to the end users, such as the ability to remove individual poor seeing readouts to improve signal-to-noise, or from advanced knowledge of the point spread function (PSF). The readout processor (ROP) is a key part of the IRIS DRS design for writing and sampling of the raw readouts into a raw science frame, which will be passed to the TMT data archive. We discuss the use of sub-arrays on the imager detectors for saturation/persistence mitigation, on-detector guide windows, and fast readout science cases (< 1 second)., Comment: 14 pages, 5 figures, 6 tables, Proceeding 10707-112 of the SPIE Astronomical Telescopes + Instrumentation 2018

The Pulsed All-sky Near-infrared Optical Search for ExtraTerrestrial Intelligence (PANOSETI) is an instrument program that aims to search for fast transient signals (nano-second to seconds) of artificial or astrophysical origin. The PANOSETI instrument objective is to sample the entire observable sky during all observable time at optical and near-infrared wavelengths over 300 - 1650 nm$^1$. The PANOSETI instrument is designed with a number of modular telescope units using Fresnel lenses ($\sim$0.5m) arranged on two geodesic domes in order to maximize sky coverage$^2$. We present the prototype design and tests of these modular Fresnel telescope units. This consists of the design of mechanical components such as the lens mounting and module frame. One of the most important goals of the modules is to maintain the characteristics of the Fresnel lens under a variety of operating conditions. We discuss how we account for a range of operating temperatures, humidity, and module orientations in our design in order to minimize undesirable changes to our focal length or angular resolution., Comment: 12 pages, 8 figures, 1 table

We present overall specifications and science goals for a new optical and near-infrared (350 - 1650 nm) instrument designed to greatly enlarge the current Search for Extraterrestrial Intelligence (SETI) phase space. The Pulsed All-sky Near-infrared Optical SETI (PANOSETI) observatory will be a dedicated SETI facility that aims to increase sky area searched, wavelengths covered, number of stellar systems observed, and duration of time monitored. This observatory will offer an "all-observable-sky" optical and wide-field near-infrared pulsed technosignature and astrophysical transient search that is capable of surveying the entire northern hemisphere. The final implemented experiment will search for transient pulsed signals occurring between nanosecond to second time scales. The optical component will cover a solid angle 2.5 million times larger than current SETI targeted searches, while also increasing dwell time per source by a factor of 10,000. The PANOSETI instrument will be the first near-infrared wide-field SETI program ever conducted. The rapid technological advance of fast-response optical and near-infrared detector arrays (i.e., Multi-Pixel Photon Counting; MPPC) make this program now feasible. The PANOSETI instrument design uses innovative domes that house 100 Fresnel lenses, which will search concurrently over 8,000 square degrees for transient signals (see Maire et al. and Cosens et al., this conference). In this paper, we describe the overall instrumental specifications and science objectives for PANOSETI., Comment: 15 pages, 7 figures, 1 table

We propose a novel instrument design to greatly expand the current optical and near-infrared SETI search parameter space by monitoring the entire observable sky during all observable time. This instrument is aimed to search for technosignatures by means of detecting nano- to micro-second light pulses that could have been emitted, for instance, for the purpose of interstellar communications or energy transfer. We present an instrument conceptual design based upon an assembly of 198 refracting 0.5-m telescopes tessellating two geodesic domes. This design produces a regular layout of hexagonal collecting apertures that optimizes the instrument footprint, aperture diameter, instrument sensitivity and total field-of-view coverage. We also present the optical performance of some Fresnel lenses envisaged to develop a dedicated panoramic SETI (PANOSETI) observatory that will dramatically increase sky-area searched (pi steradians per dome), wavelength range covered, number of stellar systems observed, interstellar space examined and duration of time monitored with respect to previous optical and near-infrared technosignature finders., Comment: 14 pages, 5 figures, 3 tables

The Galactic center offers us a unique opportunity to test General Relativity (GR) with the orbits of stars around a supermassive black hole. Observations of these stars have been one of the great successes of adaptive optics on 8-10 m telescopes, driving the need for the highest angular resolution and astrometric precision. New tests of gravitational physics in the strong gravity regime with stellar orbits will be made possible through the leap in angular resolution and sensitivity from the next generation of extremely large ground-based telescopes. We present new simulations of specific science cases such as the detection of the GR precession of stars, the measurement of extended dark mass, and the distance to the Galactic center. We use realistic models of the adaptive optics system for TMT and the IRIS instrument to simulate these science cases. In additions, the simulations include observational issues such as the impact of source confusion on astrometry and radial velocities in the dense environment of the Galactic center. We qualitatively show how improvements in sensitivity, astrometric and spectroscopic precision, and increasing the number of stars affect the science with orbits at the Galactic center. We developed a tool to determine the constraints on physical models using a joint fit of over 100 stars that are expected to be observable with TMT. These science cases require very high astrometric precision and stability, thus they provide some of the most stringent constraints on the planned instruments and adaptive optics systems., Comment: 12 pages, 6 figures

We present high angular resolution multi-wavelength data of the 3C 298 radio-loud quasar host galaxy (z=1.439) taken using the W.M. Keck Observatory OSIRIS integral field spectrograph with adaptive optics, Atacama Large Millimeter/submillimeter Array (ALMA), Hubble Space Telescope (HST) WFC3, and the Very Large Array (VLA). Extended emission is detected in the rest-frame optical nebular emission lines H$\beta$, [OIII], H$\alpha$, [NII], and [SII], as well as molecular lines CO (J=3-2) and (J=5-4). Along the path of 3C 298's relativistic jets we detect conical outflows of ionized gas with velocities up to 1700 km s$^{-1}$ and outflow rate of 450-1500 M$_\odot$yr$^{-1}$. Near the spatial center of the conical outflow, CO (J=3-2) emission shows a molecular gas disc with a total molecular mass ($\rm M_{H_{2}}$) of 6.6$\pm0.36\times10^{9}$M$_{\odot}$. On the molecular disc's blueshifted side we observe a molecular outflow with a rate of 2300 M$_\odot$yr$^{-1}$ and depletion time scale of 3 Myr. We detect no narrow H$\alpha$ emission in the outflow regions, suggesting a limit on star formation of 0.3 M$_\odot$yr$^{-1}$kpc$^{-2}$. Quasar driven winds are evacuating the molecular gas reservoir thereby directly impacting star formation in the host galaxy. The observed mass of the supermassive black hole is $10^{9.37-9.56}$M$_{\odot}$ and we determine a dynamical bulge mass of 1-1.7$\rm\times10^{10}\frac{R}{1.6 kpc}$ M$_{\odot}$. The bulge mass of 3C 298 resides 2-2.5 orders of magnitude below the expected value from the local M$\rm_{bulge}-M_{BH}$ relationship. A second galactic disc observed in nebular emission is offset from the quasar by 9 kpc suggesting the system is an intermediate stage merger. These results show that galactic scale negative feedback is occurring early in the merger phase of 3C 298, well before the coalescence of the galactic nuclei and assembly on the local relationship., Comment: 23 pages, 11 figures, 4 tables, Accepted for publication in the Astrophysical Journal

The Thirty Meter Telescope (TMT) first light instrument IRIS (Infrared Imaging Spectrograph) will complete its preliminary design phase in 2016. The IRIS instrument design includes a near-infrared (0.85 - 2.4 micron) integral field spectrograph (IFS) and imager that are able to conduct simultaneous diffraction-limited observations behind the advanced adaptive optics system NFIRAOS. The IRIS science cases have continued to be developed and new science studies have been investigated to aid in technical performance and design requirements. In this development phase, the IRIS science team has paid particular attention to the selection of filters, gratings, sensitivities of the entire system, and science cases that will benefit from the parallel mode of the IFS and imaging camera. We present new science cases for IRIS using the latest end-to-end data simulator on the following topics: Solar System bodies, the Galactic center, active galactic nuclei (AGN), and distant gravitationally-lensed galaxies. We then briefly discuss the necessity of an advanced data management system and data reduction pipeline., Comment: 15 pages, 7 figures, SPIE (2016) 9909-05

We present results from IROCKS (Intermediate Redshift OSIRIS Chemo-Kinematic Survey) for sixteen z~1 and one z~1.4 star-forming galaxies. All galaxies were observed with OSIRIS with the laser guide star adaptive optics system at Keck Observatory. We use rest-frame nebular Ha emission lines to trace morphologies and kinematics of ionized gas in star-forming galaxies on sub-kiloparsec physical scales. We observe elevated velocity dispersions (sigma > 50 km/s) seen in z > 1.5 galaxies persist at z~1 in the integrated galaxies. Using an inclined disk model and the ratio of v/sigma, we find that 1/3 of the z~1 sample are disk candidates while the other 2/3 of the sample are dominated by merger-like and irregular sources. We find that including extra attenuation towards HII regions derived from stellar population synthesis modeling brings star formation rates (SFR) using Ha and stellar population fit into a better agreement. We explore properties of compact Ha sub-component, or "clump," at z~1 and find that they follow a similar size-luminosity relation as local HII regions but are scaled-up by an order of magnitude with higher luminosities and sizes. Comparing the z~1 clumps to other high-redshift clump studies, we determine that the clump SFR surface density evolves as a function of redshift. This may imply clump formation is directly related to the gas fraction in these systems and support disk fragmentation as their formation mechanism since gas fraction scales with redshift., Comment: Accepted for publication in ApJ (Aug. 2016)

IRIS (InfraRed Imaging Spectrograph) is the diffraction-limited first light instrument for the Thirty Meter Telescope (TMT) that consists of a near-infrared (0.84 to 2.4 $\mu$m) imager and integral field spectrograph (IFS). The IFS makes use of a lenslet array and slicer for spatial sampling, which will be able to operate in 100's of different modes, including a combination of four plate scales from 4 milliarcseconds (mas) to 50 mas with a large range of filters and gratings. The imager will have a field of view of 34$\times$34 arcsec$^{2}$ with a plate scale of 4 mas with many selectable filters. We present the preliminary design of the data reduction system (DRS) for IRIS that need to address all of these observing modes. Reduction of IRIS data will have unique challenges since it will provide real-time reduction and analysis of the imaging and spectroscopic data during observational sequences, as well as advanced post-processing algorithms. The DRS will support three basic modes of operation of IRIS; reducing data from the imager, the lenslet IFS, and slicer IFS. The DRS will be written in Python, making use of open-source astronomical packages available. In addition to real-time data reduction, the DRS will utilize real-time visualization tools, providing astronomers with up-to-date evaluation of the target acquisition and data quality. The quicklook suite will include visualization tools for 1D, 2D, and 3D raw and reduced images. We discuss the overall requirements of the DRS and visualization tools, as well as necessary calibration data to achieve optimal data quality in order to exploit science cases across all cosmic distance scales., Comment: 13 pages, 2 figures, 6 tables, Proceeding 9913-165 of the SPIE Astronomical Telescopes + Instrumentation 2016

The InfraRed Imaging Spectrograph (IRIS) will be a first-light client instrument for the Narrow Field Infrared Adaptive Optics System (NFIRAOS) on the Thirty Meter Telescope. IRIS includes three configurable tip/tilt (TT) or tip/tilt/focus (TTF) On-Instrument Wavefront Sensors (OIWFS). These sensors are positioned over natural guide star (NGS) asterisms using movable polar-coordinate pick-off arms (POA) that patrol an approximately 2-arcminute circular field-of-view (FOV). The POAs are capable of colliding with one another, so an algorithm for coordinated motion that avoids contact is required. We have adopted an approach in which arm motion is evaluated using the gradient descent of a scalar potential field that includes an attractive component towards the goal configuration (locations of target stars), and repulsive components to avoid obstacles (proximity to adjacent arms). The resulting vector field is further modified by adding a component transverse to the repulsive gradient to avoid problematic local minima in the potential. We present path planning simulations using this computationally inexpensive technique, which exhibit smooth and efficient trajectories., Comment: 10 pages, 5 figures, SPIE (2016) 9913-29

IRIS (InfraRed Imaging Spectrograph) is one of the first-generation instruments for the Thirty Meter Telescope (TMT). IRIS is composed of a combination of near-infrared (0.84--2.4 $\mu$m) diffraction limited imager and integral field spectrograph. To achieve near-diffraction limited resolutions in the near-infrared wavelength region, IRIS uses the advanced adaptive optics system NFIRAOS (Narrow Field Infrared Adaptive Optics System) and integrated on-instrument wavefront sensors (OIWFS). However, IRIS itself has challenging specifications. First, the overall system wavefront error should be less than 40 nm in Y, z, J, and H-band and 42 nm in K-band over a 34.0 $\times$ 34.0 arcsecond field of view. Second, the throughput of the imager components should be more than 42 percent. To achieve the extremely low wavefront error and high throughput, all reflective design has been newly proposed. We have adopted a new design policy called "Co-Axis double-TMA", which cancels the asymmetric aberrations generated by "collimator/TMA" and "camera/TMA" efficiently. The latest imager design meets all specifications, and, in particular, the wavefront error is less than 17.3 nm and throughput is more than 50.8 percent. However, to meet the specification of wavefront error and throughput as built performance, the IRIS imager requires both mirrors with low surface irregularity after high-reflection coating in cryogenic and high-level Assembly Integration and Verification (AIV). To deal with these technical challenges, we have done the tolerance analysis and found that total pass rate is almost 99 percent in the case of gauss distribution and more than 90 percent in the case of parabolic distribution using four compensators. We also have made an AIV plan and feasibility check of the optical elements. In this paper, we will present the details of this optical system., Comment: 18 pages, 14 figures, Proceeding 9908-386 of the SPIE Astronomical Telescopes + Instrumentation 2016

We present the current optical design for the IRIS Atmospheric Dispersion Corrector (ADC). The ADC is designed for residual dispersions less than ~1 mas across a given passband at elevations of 25 degrees. Since the last report, the area of the IRIS Imager has increased by a factor of four, and the pupil size has increased from 75 to 90mm, both of which contribute to challenges with the design. Several considerations have led to the current design: residual dispersion, amount of introduced distortion, glass transmission, glass availability, and pupil displacement. In particular it was found that there are significant distortions that appear (two different components) that can lead to image blur over long exposures. Also, pupil displacement increases the wavefront error at the imager focus. We discuss these considerations, discuss the compromises, and present the final design choice and expected performance., Comment: 9 pages, 7 figures, SPIE (2016) 9908-373

IRIS is a near-infrared (0.84 to 2.4 microns) integral field spectrograph and wide-field imager being developed for first light with the Thirty Meter (TMT). It mounts to the advanced optics (AO) system NFIRAOS and has integrated on-instrument wavefront sensors (OIWFS) to achieve diffraction-limited spatial resolution at wavelengths longer than 1 micron. With moderate spectral resolution (R ~4,000 - 8,000) and large bandpass over a continuous field of view, IRIS will open new opportunities in virtually every area of astrophysical science. It will be able to resolve surface features tens of kilometers across Titan, while also mapping the distant galaxies at the scale of an individual star forming region. This paper summarizes the entire design and capabilities, and includes the results from the nearly completed preliminary design phase., Comment: 13 pages, SPIE proceeedings

TMT has defined the accuracy to be achieved for both absolute and differential astrometry in its top-level requirements documents. Because of the complexities of different types of astrometric observations, these requirements cannot be used to specify system design parameters directly. The TMT astrometry working group therefore developed detailed astrometry error budgets for a variety of science cases. These error budgets detail how astrometric errors propagate through the calibration, observing and data reduction processes. The budgets need to be condensed into sets of specific requirements that can be used by each subsystem team for design purposes. We show how this flowdown from error budgets to design requirements is achieved for the case of TMT's first-light Infrared Imaging Spectrometer (IRIS) instrument., Comment: 8 pages, 4 figures. Proceeding of SPIE, Astronomical Telescopes and Instrumentation 2016