Search

Ionic electroactive polymers made of PVA/C10MIMCl electrolytes were fabricated with high optical transparency and enhanced actuation performance due to the higher degree of ion dissociation and wider ion migration channels.

Transistors made up of carbon nanotube CNT have demonstrated excellent current–voltage characteristics which outperform some high-grade silicon-based transistors. A continuously tunable energy barrier across semiconductor interfaces is desired to make the CNT-based transistors more robust. Despite that the direct band gap of the carbyne inside a CNT can be widely tuned by strain, the size of the carbyne cannot be controlled easily. The production of a monoatomic chain with more than 6000 carbon atoms is an enormous technological challenge. To predict the optimal chain length of a carbyne in different molecular environments, we have developed a Monte Carlo model in which a finite-length carbyne with a size of 4000–15,000 atoms is encapsulated by a CNT at finite temperatures. Our simulation shows that the stability of the carbyne@nanotube is strongly influenced by the nature and porosity of the CNT, the external pressure, the temperature, and the chain length. We have observed an initiation of the chain-breaking process in a compressed carbyne@nanotube. Our work provides much-needed input for optimizing the carbyne length to produce carbon chains much longer than 6000 atoms at ~300 K. Design rules are proposed for synthesizing ~1% strained carbyne@(6,5)CNT as a component in CNT-based transistors to tune the energy barriers continuously.

Understanding the morphology and hemodynamics of cerebral vasculature at large penetration depths and microscale resolution is fundamentally important to decipher brain diseases. Among the various imaging technologies, three-photon (3P) microscopy is of significance by virtue of its deep-penetrating capability and submicron resolution, which especially benefitsiin vivo/ivascular imaging. Aggregation-induced emission luminogens (AIEgens) have been recognized to be extraordinarily powerful as 3P probes. However, systematic studies on the structure-performance relationship of 3P AIEgens have been seldom reported. Herein, a series of AIEgens has been designed and synthesized. By intentionally introducing benzene rings onto electron donors (D) and acceptors (A), the molecular distortion, conjugation strength, and the D-A relationship can be facilely manipulated. Upon encapsulation with DSPE-PEGsub2000/sub, the optimized AIEgens are successfully applied for 3P microscopy with emission in the far-red/near-infrared-I (NIR-I, 700-950 nm) region under the near-infrared-III (NIR-III, 1600-1870 nm) excitation. Impressively, using mice with an opened skull, vasculature within 1700 μm and a microvessel with a diameter of 2.2 μm in deep mouse brain were clearly visualized. In addition, the hemodynamics of blood vessels were well-characterized. Thus, this work not only proposes a molecular design strategy of 3P AIEgens but also promotes the performance of 3P imaging in cerebral vasculature.

Gene therapy has shown great potential in the treatment of many diseases by downregulating the expression of certain genes. The development of gene vectors as a vehicle for gene therapy has greatly facilitated the widespread clinical application of nucleic acid materials (DNA, mRNA, siRNA, and miRNA). Currently, both viral and non-viral vectors are used as delivery systems of nucleic acid materials for gene therapy. However, viral vector-based gene therapy has several limitations, including immunogenicity and carcinogenesis caused by the exogenous viral vectors. To address these issues, non-viral nanocarrier-based gene therapy has been explored for superior performance with enhanced gene stability, high treatment efficiency, improved tumor-targeting, and better biocompatibility. In this review, we discuss various non-viral vector-mediated gene therapy approaches using multifunctional biodegradable or non-biodegradable nanocarriers, including polymer-based nanoparticles, lipid-based nanoparticles, carbon nanotubes, gold nanoparticles (AuNPs), quantum dots (QDs), silica nanoparticles, metal-based nanoparticles and two-dimensional nanocarriers. Various strategies to construct non-viral nanocarriers based on their delivery efficiency of targeted genes will be introduced. Subsequently, we discuss the cellular uptake pathways of non-viral nanocarriers. In addition, multifunctional gene therapy based on non-viral nanocarriers is summarized, in which the gene therapy can be combined with other treatments, such as photothermal therapy (PTT), photodynamic therapy (PDT), immunotherapy and chemotherapy. We also provide a comprehensive discussion of the biological toxicity and safety of non-viral vector-based gene therapy. Finally, the present limitations and challenges of non-viral nanocarriers for gene therapy in future clinical research are discussed, to promote wider clinical applications of non-viral vector-based gene therapy.

The superior electronic, optical and magnetic properties of the one-dimensional carbyne are of high technological relevance for the development of future optoelectronic and magnetoelectronic applications. However, the production of a monoatomic chain with more than 6000 carbon atoms is an enormous technological challenge. To predict the exact growth conditions and in particular the optimal chain length of a carbyne fibre in different molecular environments, we have developed a Monte Carlo model in which a finite-length carbyne with a size of 4000-15000 atoms is encapsulated by a carbon nanotube at finite temperature. Our simulation shows that the stability of the carbyne-nanotube is strongly influenced by the nature and porosity of the carbon nanotube, the external pressure, the temperature and the chain length. When the exact geometric structure of the carbon nanotube and the environmental parameters are provided as input, our simulation can predict the optimal length of the encapsulated carbyne. We have found four mechanisms of triggering chain breakage and have predicted the probable size of the carbyne fragments in excited states. Our work provides much needed input for optimising the carbyne length to produce carbon chains much longer than 6000 atoms at room temperature.

Active packaging films have emerged as alternatives to replace petroleum-based packaging materials. In this work, poly(vinyl alcohol) (PVA)/starch/ethyl lauroyl arginate (LAE) films possessing enhanced properties were prepared. Scanning electron microscopy (SEM) showed that PVA and starch were compatible, the concentrations of LAE greatly affected the structural integrity. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction showed that the inclusion of LAE did not significantly affect the intermolecular interactions and crystal structures of the polymer matrix. With an increase of the LAE content, the tensile strength (TS) was slightly decreased due to the altered microstructures, the elongation at break (EB) significantly increased ascribed to the synergistic effect of acetic acid, glycerol and LAE. The values of TS and EB were 17.25 MPa and 586.08%, respectively when LAE was 10%. Active films showed good barrier properties from UV while retaining the transmittance in the visible light region. The films containing 1% of LAE exhibited antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), the inhibition zone of bacterial growth gradually expanded with increasing LAE content. This study demonstrates the potential of using LAE as the antibacterial agent for synthesizing natural-based polymeric films for active packaging applications.

Cancer is a life-threatening disease worldwide. Although several approaches, such as surgery, chemotherapy, and radiotherapy, have been proven effective for many patients in clinics, they usually suffer from drug resistance, severe toxic-side effects, patient discomfort, and sometimes, unsatisfactory efficacies. In recent years, phototherapy, as a less invasive but effective therapeutic method, has brought hope for cancer treatment. However, most reported photo-therapeutic agents are constructed using complex components with non-negligible toxicity risk, thus retarding the start of their clinical trials. To address this issue, herein, biocompatible photothermal/photodynamic dual-mode therapeutic nanoparticles (CBP NPs) were successfully designed and constructed based on the Food and Drug Administration (FDA)-approved ingredients, chlorin e6 (Ce6) and poly(dopamine) (PDA). Upon light irradiation, hyperthermia was induced and reactive oxygen species (ROS) were generated simultaneously by CBP NPs, contributing to synergistic phototherapy toward cancer. The

This review is intended to provide an overview of the design and fabrication of ionic liquid-based ionic electroactive polymer (IL-iEAP) transducers for advanced applications in biological and electronic fields. The iEAP is a class of smart materials that can perform sensing or actuating functions by controlling the movement of cations and anions in the active layer. This type of material can deform under low voltage stimulation and generate electrical signals when undergoing mechanical deformation because of ion redistribution. Numerous research attention has been focused on studying the deformation mechanisms and the potential for actuation, sensing, and energy harvesting applications. Compared to the traditional water-based iEAP, the non-volatile IL-iEAP delivers a wider electrochemical window and a more stable actuation performance. In this paper, the classification of iEAP with different actuation mechanisms is first outlined, followed by introducing various preparation methods including nanotechnology for IL-iEAPs, and discussing the key factors governing their actuation performance. In addition, the advanced functions of IL-iEAP in actuating and sensing, especially self-sensing in bionics and electromechanical equipment applications, are reviewed. Finally, novel nanotechnologies used for fabricating IL-iEAPs and the prospects of their microelectromechanical system (MEMS) applications are discussed.

UV protection and coatings for plastics are important in many applications. The cladding of low microwave (MW) absorption composite coatings on high MW transparent plastic substrates is a challenge due to their disparate dielectric properties. Moreover, an uneven heat energy conversion within the composite creates an additional hurdle in producing a coating with good surface integrity. In this study, a protocol was developed to overcome these difficulties based on a hybrid approach. The adverse effect of temperature mismatch between the coating and substrate was reduced through a two-way susceptor-aided heating mechanism. Low MW absorbing sol–gel derived composite coatings consisting of silicon dioxide (SiO2) and titanium dioxide (TiO2) were successfully cladded on the surface of MW and visual light transparent polycarbonate to produce a clear protective coating with UV-resistance. Nanoindentation tests were conducted to assess the effectiveness of the proposed protocol. Significant enhancement in the surface elastic modulus and hardness were achieved.

Photodynamic efficiency is strongly dependent on the generation rate of reactive oxygen species (ROS) and the tissue penetration depth. Recent advances in materials science reveal that organic molecules with room-temperature phosphorescence (RTP) can potentially serve as efficient photosensitizers owing to their limited dark cytotoxicity and abundant triplet excitons upon light irradiation. In this study, we combine RTP materials with two-photon excitation to improve the ROS generation, therapeutic precision, and tissue penetration of photodynamic therapy. We successfully prepared a novel RTP-based photosensitizer (BF

Microwave (MW) sintering offers higher heating rate, rapid processing, reduced energy consumption, and reduced sintering temperature. However, the technique is not fully understood, difficult to control, and often relies on experience and trial-and-error approach. Consequently, hot spots, uneven heating, thermal runaway, and shape distortion develop in sintered compacts. Therefore, developing a model that can simulate the sintering process, enhance predictability, and determine the critical sintering conditions is essential. Multiphysics finite element (FE) modelling of hybrid MW sintering of a magnesium alloy AZ61 compact was undertaken in this study. The FE model coupled the electromagnetic, heat conduction, and densification equations. The model utilised parameters related to the furnace, compact, and susceptor to predict the spatial distribution of electric field, thermal response, and densification in the compact. A power-based sintering criterion was developed to predict the sintering of the compact and estimate its critical sintering energy. Modelling results showed that heating time, compact size, and thickness of the susceptor are critical to the sintering process. It was also shown that the susceptor not only mediated the sintering of the compact but also homogenised its temperature and densification. Thus, MW sintering of the compact was predicted to occur at 500 °C for 8 to 10 min with a predicted relative density of about 0.98. Experimental MW sintering data showed good concurrence with the developed model. These results are useful for controlling the MW sintering process, eliminating trial-and-error, and determining the critical sintering conditions.

Gene-based therapies have emerged as a new modality for combating a myriad of currently incurable diseases. However, the fragile nature of gene therapeutics has significantly hampered their biomedical applications. Correspondingly, the development of gene-delivery vectors is of critical importance for gene-based therapies. To date, a variety of gene-delivery vectors have been created and utilized for gene delivery. In general, they can be categorized into viral- and non-viral vectors. Due to safety issues associated with viral vectors, non-viral vectors have recently attracted much more research focus. Of these non-viral vectors, polymeric vectors, which have been preferred due to their low immunogenicity, ease of production, controlled chemical composition and high chemical versatility, have constituted an ideal alternative to viral vectors. In particular, biodegradable polymers, which possess advantageous biocompatibility and biosafety, have been considered to have great potential in clinical applications. In this context, the aim of this review is to introduce the recent development and progress of biodegradable polymers for gene delivery applications, especially for their chemical structure design, gene delivery capacity and additional biological functions. Accordingly, we first define and categorize biodegradable polymers, followed by describing their corresponding degradation mechanisms. Various types of biodegradable polymers resulting from natural and synthetic polymers will be introduced and their applications in gene delivery will be examined. Finally, a future perspective regarding the development of biodegradable polymer vectors will be given.

Two-photon polymerization direct laser writing (TPP DLW) is an emerging technology for producing advanced functional devices with complex three-dimensional (3D) micro-structures. Tremendous efforts have been devoted to developing two-photon polymerizable photo-sensitive nanocomposites with tailored properties. Light-induced reconfigurable smart materials such as liquid crystalline elastomers (LCEs) are promising materials. However, due to the difficulties in designing two-photon polymerizable liquid crystal monomer (LCM) nanocomposite photoresists, it is challenging to fabricate true 3D LCE micro-structures. In this paper, we report the preparation of photo-sensitive LCE nanocomposites containing photothermal nanomaterials, including multiwalled carbon nanotubes, graphene oxide and gold nanorods (AuNRs), for TPP DLW. The printability of the LCE nanocomposites is assessed by the fidelity of the micro-structures under different laser writing conditions. DLW of GO/LCM photoresist has shown a vigorous bubble formation. This may be due to the excessive heat generation upon rapid energy absorption of 780 nm laser energy. Compared to pure LCM photoresists, AuNR/LCM photoresists have a lower laser intensity threshold and higher critical laser scanning speed, due to the high absorption of AuNRs at 780 nm, which enhanced the photo-sensitivity of the photoresist. Therefore, a shorter printing time can be achieved for the AuNR/LCM photoresist.

Nowadays, energy and the environment have become critical issues for determining the sustainability of the Earth. Freshwater crises, as an increasingly serious global problem, pose a great threat to our economies, the environment and us. Solar-driven evaporation has emerged as a promising and sustainable approach to convert solar energy into clean water. In fact, the production of freshwater is not only governed by heat generation at the interface, but the process also relies on the coordination and cooperation of functional modules in the solar-driven evaporation system. This review begins with system designs of solar evaporators, considering thermal manipulation structures, water transportation pathways, and vapour condensation modules, which focus on improving the overall energy utilization, long-term usability, and freshwater yield. This is followed by a summary and discussions of cutting-edge solar evaporation applications and their underlying mechanisms. Finally, existing challenges and potential solutions for future applications are discussed and provided. This review aims to provide useful guidelines and references to scientists and researchers for the future development of clean water generation systems.

Diamondoids are cage-like hydrocarbon materials with unique characteristics such as low dielectric constants, negative electron affinity, large steric bulk, and electron-donating ability. They are widely used for advanced functional materials in nanocomposite science. Surface modification of diamondoids also produces functional derivatives that broaden its applications. This article provides a concise review of the fundamentals of diamondoids, including their origin and functionalization, electronic structure, optical properties, and vibrational characteristics. The recent advances of diamondoids and their derivatives in applications, such as nanocomposites and thin film coatings, are presented. The fabrication of diamondoid-based nanostructured devices, including electron emitters, catalyst sensors, and light-emitting diodes, are also reviewed. Finally, the future developments of this unique class of hydrocarbon materials in producing a novel nanostructure system using advanced nanotechnologies are discussed. This review is intended to provide a basic understanding of diamondoid properties, discuss the recent progress of its modifications and functionalization, and highlight its novel applications and future prospects.

Electroactive hydrogels have received increasing attention due to the possibility of being used in biomimetics, such as for soft robotics and artificial muscles. However, the applications are hindered by the poor mechanical properties and slow response time. To address these issues, in this study, supramolecular ionic polymer–carbon nanotube (SIPC) composite hydrogels were fabricated via in situ free radical polymerization. The polymer matrix consisted of carbon nanotubes (CNTs), styrene sulfonic sodium (SSNa), β-cyclodextrin (β-CD)-grafted acrylamide, and ferrocene (Fc)-grafted acrylamide, with the incorporation of SSNa serving as the ionic source. On applying an external voltage, the ions accumulate on one side of the matrix, leading to localized swelling and bending of the structure. Therefore, a controllable and reversible actuation can be achieved by changing the applied voltage. The tensile strength of the SIPC was improved by over 300%, from 12 to 49 kPa, due to the reinforcement effect of the CNTs and the supramolecular host–guest interactions between the β-CD and Fc moieties. The inclusion of CNTs not only improved the tensile properties but also enhanced the ion mobility, which lead to a faster electromechanical response. The presented electro-responsive composite hydrogel shows a high potential for the development of robotic devices and soft smart components for sensing and actuating applications.

Since the conceptualization of nanomedicine, numerous nanostructure-mediated drug formulations have progressed into clinical trials for treating cancer. However, recent clinical trial results indicate such kind of drug formulations has a limited improvement on the antitumor efficacy. This is due to the biological barriers associated with those formulations, for example, circulation stability, extravasation efficiency in tumor, tumor penetration ability, and developed multi-drug resistance. When employing for nanomedicine formulations, pristine organic-based and inorganic-based nanostructures have their own limitations. Accordingly, organic/inorganic (O/I) hybrids have been developed to integrate the merits of both, and to minimize their intrinsic drawbacks. In this context, the recent development in O/I hybrids resulting from a self-assembly strategy will be introduced. Through such a strategy, organic and inorganic building blocks can be self-assembled via either chemical covalent bonds or physical interactions. Based on the self-assemble procedure, the hybridization of four organic building blocks including liposomes, micelles, dendrimers, and polymeric nanocapsules with five functional inorganic nanoparticles comprising gold nanostructures, magnetic nanoparticles, carbon-based materials, quantum dots, and silica nanoparticles will be highlighted. The recent progress of these O/I hybrids in advanced modalities for combating cancer, such as, therapeutic agent delivery, photothermal therapy, photodynamic therapy, and immunotherapy will be systematically reviewed.

Open in a separate window Size- and shape-dependent features of plasmonic nanocrystals govern the development of their applications. In the past decades, gold nanostructures, such as gold nanorods and nanoshells, have been well studied and applied for sensing, bioimaging, and photothermal generation. However, knowledge of copper chalcogenide, a new generation of plasmonic nanomaterials, is limited, especially about their preparation and size- and shape-dependent photothermal properties. In this work, controllable size and shape Cu2–xS nanocrystals (NCs) are synthesized by a facile aqueous route. Using low-molecular-weight polyethylenimine (PEI) as the reducing and capping agents, the size and shape of Cu2–xS NCs can be controlled with lengths from 6.5 to 46.5 nm and the aspect ratio from 2.2 to 7.5 by adjusting the concentration of PEI. The plasmonic peak of Cu2–xS experiences a redshift (from 1145 to 1369 nm) when the length increases from 6.5 to 44.5 nm. Under the irradiation of 1064 nm laser with 1.33 W/cm2, an excellent photothermal conversion rate (from 34.9 to 49.0%) is obtained. The characterization of Cu2–xS NCs is conducted with a UV–vis spectrometer, transmission electron microscopy, powder X-ray diffraction measurements, and 1064 nm laser.

Four-dimensional (4D) printable light-powered materials have emerged as a new generation of materials for the development of functional devices. The design of these types of materials is mostly based on the trans-cis transformation of azobenzene moieties in a liquid crystalline elastomer (LCE) matrix, in which the motion is triggered by ultraviolet (UV) irradiation. In this paper, we first report on a direct laser printable photoresist for producing light-powered 4D structures with enhanced mechanical properties and near-infrared (NIR) responsive mechanical deformation. The reported nanocomposite design is based on the photothermal effects of gold nanorods (AuNRs), which can induce the nematic-to-isotropic transition of LCE upon exposure to NIR irradiation. The miscibility between AuNRs and LCE is enhanced by thiol functionalization. Appropriate printing parameters are determined, and nanocomposites containing 0-3 wt % of AuNR loading are fabricated via femtosecond two-photon direct laser writing. The effects of the AuNR loading fraction and laser power on the light-powered actuating performance are evaluated. It is found that the nanocomposite with AuNR loading of 3 wt % demonstrates the maximum percentage (20%) of elongation under an NIR laser power of 2 W. An increase in laser power can lead to faster deformation but slower restoration. The nanocomposites demonstrate relatively good stability. Even after 300 actuation cycles, 80% of the elongation magnitude can be retained. In addition, an improvement of 80% in the complex modulus of the nanocomposites, due to the inclusion of AuNRs, is observed.

A thermal and photo dual-responsive drug delivery system is newly designed for controlled anticancer drug delivery. The concept of this design is to encapsulate upconversion nanoparticles in a phot...

Consumer grade supercapacitors as power supply resources require outstanding electrode materials with large conductivity, high durability and retention rates, as well as large capacity. Graphene is a promising functional material as an electrical double layer capacitance electrode due to its large surface area, high chemical stability and moderate conductivity. However, the existing graphene synthesis methods, including CVD and chemical exfoliation, are limited to lab scale production. Although laser induced graphene has demonstrated outstanding performance as an electrode material for microsupercapacitors, its difficulty to attach to the metallic current collector limits its application as a large capacity electrode material. Herein, laser induced forward transfer of graphene is developed for additively depositing laser induced graphene onto nickel foam as a composite electrode. The laser annealing enhanced the lattice matching between the extended Basal plane of graphene and Ni (111) resulting in its high electrical conductivity (359 712 S m−1), high retention rate (over 98% capacitance retention after 10 000 cycles), and large areal specific capacitance (995 mF cm−2) and power density (9.39 mW cm−2). The assembled supercapacitors with these additively printed electrodes can work as a USB charger with a stable 5 V output voltage, for charging smart phones and other smart devices.

Poly[2-( tert-butylaminoethyl) methacrylate] (PTA), an important class of antimicrobial polymers, has demonstrated its great biocidal efficiency, favorable nontoxicity, and versatile applicability. To further enhance its antimicrobial efficiency, an optimization of the chemical structure of PTA polymers is performed via atom transfer radical polymerization (ATRP) in terms of the antimicrobial ability against Escherichia coli ( E. coli) and Staphylococcus aureus ( S. aureus). After the optimization, the resulting PTA is blended into a polylactide (PLA) matrix to form PTA/PLA composite thin films. It is first found, that the antimicrobial efficiency of PTA/PLA composites was significantly enhanced by controlling the PLA crystallinity and the PLA spherulite size. A possible mechanistic route regarding this new finding has been rationally discussed. Lastly, the cytotoxicity and mechanical properties of a PTA/PLA composite thin film exhibiting the best biocidal effect are evaluated for assessing its potential as a new material for creating antimicrobial biomedical devices.

Wearable sensing technologies are vital for realizing personalized health monitoring. Noninvasive human sweat sampling is essential for monitoring an individual's physical state using rich physiological data. However, existing wearable sensing technologies lack the controlled capture of body sweat and in performing on-device measurement without inflammatory contact. Herein, we report the development of a wearable sweat-capture device using patterned graphene arrays with controlled superwettability and electrical conductivity for simultaneously capturing and electrochemically measuring sweat droplets. The sweat droplets exhibited strong attachment on the superhydrophilic graphene patterns, even during moderate exercising. The captured sweat droplets present strong electrochemical signals using graphene films as the working electrode and metal pins as the counter electrode arrays assembled on 3D printed holders, at the detection limit of 6 μM for H2O2 sensing. This research enables full-body spatiotemporal mapping of sweat, which is beneficial for a broad range of personalized monitoring applications, such as drug abuse detection, athletics performance optimization, and physiological wellness tracking.

Powder metallurgy and rapid microwave (MW) sintering techniques were successfully applied to engineer a hybrid cell structure into magnesium alloy AZ61 syntactic foams. The hybrid cell structure, comprising open- and closed-cells, originated from leached carbamide granules and hollow microspheres of fly ash (HS), respectively. External MW susceptors accelerated the sintering process and greatly mitigated the formation of undesirable interfacial reactions. The cell hybridisation technique facilitated control over the density and strength of the syntactic foams. Accordingly, floatable syntactic foams with a density of about 0.79 g/cm3 and compressive strength of 16 MPa were synthesised without recourse to any surface modification or chemically-induced superhydrophobicity. The processing techniques were capable of mitigating damage to the HS microspheres as confirmed by microstructural examinations. Furthermore, potential applications of the floatable syntactic foam sample, as a microboat and chemical release agent, were demonstrated by using ethanol as a propellant. AZ61 syntactic foams synthesised in this study exhibited low density and adequate strength, suggesting their applicability as alternative materials to polymer composite foams. Keywords: Magnesium alloy, Powder metallurgy, Microwave sintering, Mechanical properties, Syntactic foam, Hybrid cells

Near infrared to ultraviolet (NIR-to-UV) up-conversion nanocomposites, composed of an upconversion nanoparticle (UCNP) core and a transformable polyspiropyran shell, were prepared by distillation precipitation polymerization and the template method. The polyspiropyran shell can undergo reversible hydrophoblic-hydrophilic transformations through the switching of UV and visible light and by variation of pH. About 10 wt% of the anticancer drug, doxorubicin (DOX), can be loaded into the drug carrying layer under pH 7.4 by electrostatic force. The NIR and pH responsive features of the polyspiropyran shell were shown by the dynamic light scattering (DLS) results, in which the size of nanocomposites (UCNPs@SP-MA/MAA) became larger under NIR irradiation and pH 4.5. The hydrophobic to hydrophilic surface transformation alters the permittivity of the polyspiropyran shell and the release behavior. The cumulative release rate of the DOX-loaded UCNPs@SP-MA/MAA reached 53.8% under pH 4.5 and NIR irradiation. The cytotoxicity of the bare UCNPs@SP-MA/MAA and the DOX-loaded UCNPs@SP-MA/MAA were evaluated against breast cancer cells and the results confirmed that the toxicity of UCNPs@SP-MA/MAA nanocomposites was minimal, even at high dosage (100 μg/mL), while the toxicity of DOX can be triggered by NIR light.

The present study proposes an efficient processing scheme for fabricating carbon nanotubes (CNTs)-reinforced magnesium (Mg) alloy AZ61 composite foams with enhanced compressive and energy absorption properties. The scheme combines powder metallurgy, rapid microwave (MW) sintering, and pore wall reinforcement to overcome the low strength, non-uniform pore structure, prolonged sintering process, and high production cost associated with conventional unreinforced Mg-based foams. In the proposed scheme, a dual-stage mixing method is used to homogeneously disperse and incorporate CNTs into the matrix for strength enhancement, and susceptor role, and carbamide granules are used to control the pore size and porosity fractions. In addition, MW sintering is used to rapidly consolidate the samples in 20 min through the synergy between an external and an internal susceptor (i.e. CNTs), which facilitates uniform and volumetric heating of the entire samples. Thus, sample oxidation and the formation of deleterious secondary phases are minimised, while up to 69% energy is saved. Experimental results show that the dispersion and incorporation of CNTs into the matrix, via the present processing scheme, clearly enhance the compressive and energy absorption properties of the composite foams, as compared with the unreinforced foams. The proposed processing scheme is a rapid and energy-saving efficient technique, which can be used to fabricate high quality Mg alloy composite foams with improved compression and energy absorption properties.

In this study, dual-responsive polymeric nanocapsules, in which the state (swelling or collapse) can be repeatedly controlled by external stimuli (i.e., temperature and light), have been designed and prepared through distillation–precipitation polymerization. Temperature sensitive monomers of N-isopropylacrylamide are cross-linked by photoresponsive bis(methacryloylamino) onto a silica nanospherical template to form a core–shell (SiO2–PNIPAM/Azo) structure. The silica core is then removed by hydrofluoric acid to produce PNIPAM/Azo nanocapsules (P/ANCs) of diameter ∼238 nm at ∼25 °C. The size of the nanocapsule is temperature responsive and, as such, its diameter could be reduced to ∼182 nm on increasing the temperature to 40 °C. In addition, the permeability of nanocapsules can be adjusted by UV irradiation. The cis–trans transformation of modified azobenzene allowed us to perform both the encapsulation and controlled release of molecules. Rhodamine B (RhB) was successfully encapsulated using the photomec...

Seawater dehydrates humans when it is drunk untreated, due to its high concentrations of salts. Currently, it can only be purified into large amounts of freshwater using reverse osmosis, with large electricity consumption, carbon emissions and environmental damage. Although seawater directly evaporates under natural sunlight, the efficiencies and scales are too small for practical collection. Herein, we report a floating graphene membrane for evaporating seawater into freshwater exclusively using solar energy, with high efficiency and large scalability. Polyimide films can be fully converted to graphene membranes using one-step laser scribing, without involving chemicals or generating wastes. These green desalination graphene membranes evaporate water at a rate up to 1.37 kg m−2 h−1 under one sun illumination, which possesses even higher purity than domestic water. These graphene membranes can float firmly at the air–water interface with a self-righting ability, such that the process is feasible for practical water desalination on ocean surfaces.