Search

Autologous platelet-rich plasma (PRP) has gained popularity as a less invasive treatment for various musculoskeletal tissue injuries and conditions due to its favorable safety profile, minimal manipulation and cost-effectiveness. Although PRP treatment has been clinically used for the treatment of osteoarthritis (OA) and damaged cartilage, evidence on therapeutic efficacy has been inconsistent, which calls for a methodology to achieve consistent and improved treatment outcomes. Given that PRP contains numerous proteins, we hypothesized that attenuation of a growth factor known to be detrimental to the healing tissue would enhance efficacy of PRP treatment. Considering that VEGF-mediated angiogenesis inhibits the repair of articular cartilage, we developed VEGF-attenuated PRP by sequestering VEGF in PRP using VEGF-binding microspheres. We demonstrated that VEGF attenuation in PRP did not inhibit the effect of PRP on chondrogenic differentiation of stem cells in vitro. In addition, healing of rat OA cartilage was significantly improved after treatment with VEGF-attenuated PRP when compared to the PRP treatment group or PBS control group. We expect that attenuation of unwanted biological activity using growth factor-binding microspheres could provide a new PRP customization method broadly applicable to various tissue repair processes.

The separation and sorting of human cells is an important step in the bioprocessing of cell-based therapeutics. Heterogeneous mixtures of cells must be sorted to isolate the desired cell type and purify the final product. This process is often achieved by antibody-based sorting techniques. In this work, we demonstrate that magnetic microspheres may be functionalized with peptides that selectively bind to cells on the basis of their relative concentration of specific surface proteins. Five-micrometer-magnetic microspheres were coated with the synthetic copolymer PVG (poly(poly(ethylene glycol)methyl ether methacrylate-ran-vinyl dimethyl azlactone-ran-glycidyl methacrylate) and functionalized with the vascular endothelial growth factor receptor binding peptide (VRBP), which binds to the vascular endothelial growth factor receptor (VEGFR). These microspheres exhibited low cytotoxicity and bind to cells depending on their relative surface protein expression. Finally, coated, magnetic microspheres were used to separate heterogeneous populations of cells dependent on their VEGFR expression through magnetic-assisted cell sorting (MACS), demonstrating that peptide-based cell sorting mechanisms may be useful in the bioprocessing of human-cell-based products.

The ongoing usefulness of Table 1 in the Zootaxa paper Comprehensive taxonomic, faunistic, biological, and geographic inventory and analysis of the Sciomyzidae (Diptera: Acalyptratae) of the Delmarva region and nearby states in eastern North America (Murphy et al. 2018) is compromised by impermanent literature-citation numbering. To secure Table 1 as a permanent resource for the study of Sciomyzidae, provided herein are bibliographic data for the 59 works cited in that paper by Bibliography of Sciomyzidae (“ScioBiblio”) number only. Details are provided regarding the history of the ScioBiblio and plans to reorganize and publish it.

Human mesenchymal stromal cells (hMSC), also called mesenchymal stem cells, are adult cells that have demonstrated their potential in therapeutic applications, highlighted by their ability to differentiate down different lineages, modulate the immune system, and produce biologics. There is a pressing need for scalable culture systems for hMSC due to the large number of cells needed for clinical applications. Most current methods for expanding hMSC fail to provide a reproducible cell product in clinically required cell numbers without the use of serum-containing media or harsh enzymes. In this work, we apply a tailorable, thin, synthetic polymer coating-poly(poly(ethylene glycol) methyl ether methacrylate-ran-vinyl dimethyl azlactone-ran-glycidyl methacrylate) (P(PEGMEMA-r-VDM-r-GMA), PVG)-to the surface of commercially available polystyrene (PS) microcarriers to create chemically defined three-dimensional (3D) surfaces for large-scale cell expansion. These chemically defined microcarriers provide a reproducible surface that does not rely on the adsorption of xenogeneic serum proteins to mediate cell adhesion, enabling their use in xeno-free culture systems. Specifically, this work demonstrates the improved adhesion of hMSC to coated microcarriers over PS microcarriers in xeno-free media and describes their use in a readily scalable, bioreactor-based culture system. Additionally, these surfaces resist the adsorption of media-borne and cell-produced proteins, which result in integrin-mediated cell adhesion throughout the culture period. This feature allows the cells to be efficiently passaged from the microcarrier using a chemical chelating agent (ethylenediaminetetraacetic acid (EDTA)) in the absence of cleavage enzymes, an improvement over other microcarrier products in the field. Bioreactor culture of hMSC on these microcarriers enabled the production of hMSC over 4 days from a scalable, xeno-free environment.

Prolonged and elevated transforming growth factor-β1 (TGF-β1) signaling can lead to undesired scar formation during tissue repair and fibrosis that is often a result of chronic inflammation in the lung, kidney, liver, heart, skin, and joints. We report new TGF-β1 binding peptides that interfere with TGF-β1 binding to its cognate receptors and thus attenuate its biological activity. We identified TGF-β1 binding peptides from the TGF-β1 binding domains of TGF-β receptors and engineered their sequences to facilitate chemical conjugation to biomaterials using molecular docking simulations. The in vitro binding studies and cell-based assays showed that RIPΔ, which was derived from TGF-β type I receptor, bound TGF-β1 in a sequence-specific manner and reduced the biological activity of TGF-β1 when the peptide was presented either in soluble form or conjugated to a commonly used synthetic biomaterial. This approach may have implications for clinical applications such as treatment of various fibrotic diseases and soft tissue repair and offer a design strategy for peptide antibodies based on the biomimicry of ligand-receptor interactions.

A catalog of the Sciomyzidae of Chile is presented. Included are all valid names and synonyms for the 27 species and 11 genera known from Chile, including information about name, author, year of publication, page number, type species, type depository, type locality, and references. Tetanoceroides Malloch is the most species-rich genus in Chile, with seven species, followed by Pherbellia Robineau-Desvoidy, with five species; however, if undescribed species are included, Pherbellia is the most species-rich genus in Chile, with nine species. The geographic distribution of species was determined from examination of bibliographic data and label data on specimens in collections. A key is provided to the genera of Sciomyzidae in Chile.

The regenerative potential of bone marrow cells could be harnessed for tissue engineering applications. Bone marrow can be easily collected from patients, providing a valuable autologous source of therapeutic cells. However, years of delivery of bone marrow cells have highlighted the need for their genetic manipulation to overcome heterogeneity and to confer specificity to the regenerative process. In this study, we optimized the use of condensed mRNA as a non-viral alternative. As a proof of concept, we used mRNA encoding for reporter proteins such as EGFP or Firefly luciferase, which was condensed by complexing agents and delivered to human bone marrow cells using mineral-coated microparticles. We demonstrated that human bone marrow cells could be transfected with complexed mRNA, and that this approach was more efficient than the delivery of complexed plasmid DNA. In addition, human bone marrow cells were vulnerable to the toxicity of mRNA complexing agents, but these deleterious effects were mitigated by using mineral-coated microparticles as a carrier of complexed mRNA. Microparticle-mediated delivery of complexed mRNA also enabled higher cell metabolic activity and higher transfection in multiple in vitro culture conditions, including suspension culture and three-dimensional culture., Graphical Abstract

Three-dimensional (3D) multicellular aggregates, in comparison to two-dimensional monolayer culture, can provide tissue culture models that better recapitulate the abundant cell-cell and cell-matrix interactions found in vivo. In addition, aggregates are potentially useful building blocks for tissue engineering. However, control over the interior aggregate microenvironment is challenging due to inherent barriers for diffusion of biological mediators (e.g. growth factors) throughout the multicellular aggregates. Previous studies have shown that incorporation of biomaterials into multicellular aggregates can support cell survival and control differentiation of stem cell aggregates by delivering morphogens from within the 3D construct. In this study, we developed a highly efficient microparticle-based gene delivery approach to uniformly transfect human mesenchymal stromal cells (hMSC) within multicellular aggregates and cell sheets. We hypothesized that release of plasmid DNA (pDNA) lipoplexes from mineral-coated microparticles (MCMs) within 3D hMSC constructs would improve transfection in comparison to standard free pDNA lipoplex delivery in the media. Our approach increased transfection efficiency 5-fold over delivery of free pDNA lipoplexes in the media and resulted in homogenous distribution of transfected cells throughout the 3D constructs. Additionally, we found that MCMs improved hMSC transfection by specifically increasing macropinocytosis-mediated uptake of pDNA. Finally, we showed up to a three-fold increase of bone morphogenetic protein-2 (BMP-2) expression and enhanced calcium deposition within 3D hMSC constructs following MCM-mediated delivery of a BMP-2 encoding plasmid and culture in osteogenic medium. The technology described here provides a valuable tool for achieving efficient and homogenous transfection of 3D cell constructs and is therefore of particular value in tissue engineering and regenerative medicine applications. STATEMENT OF SIGNIFICANCE: This original research describes a materials-based approach, whereby use of mineral-coated microparticles improves the efficiency of non-viral gene delivery in three-dimensional human mesenchymal stromal cell constructs. Specifically, it demonstrates the use of mineral-coated microparticles to enable highly efficient transfection of human mesenchymal stromal cells in large, 3D culture formats. The manuscript also identifies specific endocytosis pathways that interact with the mineral coating to afford the improved transfection efficiency, as well as demonstrates the utility of this approach toward improving differentiation of large cell constructs. We feel that this manuscript will impact the current understanding and near-term development of materials for non-viral gene delivery in broad tissue engineering and biofabrication applications, and therefore be of interest to a diverse biomaterials audience.

Interleukin-1 receptor antagonist (IL-1Ra) is a naturally occurring anti-inflammatory cytokine that inhibits IL-1 activity and has been proposed to treat a wide variety of systemic and local inflammatory pathologies for multiple decades. However, the short half-life and high concentration required to inhibit IL-1 activity has limited its use in clinical applications. Many strategies have been developed with the goal of improving the therapeutic efficacy of IL-1Ra for a variety of pathologies, including fusing IL-1Ra to protein/peptide/polymer partners, releasing IL-1Ra from injectable polymer or mineral particles, and release of IL-1Ra from injectable coacervates and gels. This literature review examines injectable biomaterials engineered to improve IL-1Ra delivery, both locally and systemically, to increase its efficacy and ease of use in clinic. STATEMENT OF SIGNIFICANCE: Interleukin-1 receptor antagonist (IL-1Ra) is a therapeutic protein with the potential to treat numerous inflammatory conditions and diseases. However, its short biological half-life and high therapeutic concentration may limit its utility in all but a few clinical scenarios. In this review, we present the biomaterial based delivery strategies which have been explored to deliver IL-1Ra to improve its efficacy and applicability to treat inflammation.

Successful commercialization of cell-based therapies depends on technologies and processes that support scalable, reproducible, and economical cell biomanufacturing. Currently, derivation of target therapeutic cell types from primary cells and stem cells often involves lengthy expansion and differentiation processes that use substantial quantities of recombinant growth factors (GFs) and cytokines. Engineered biomaterials that can regulate GF delivery, activity, and signaling offer promise as tools to enable more efficient GF usage in cell culture. This review discusses emerging design strategies for GF-regulating biomaterials and how such materials may be applied to mitigate growth factor cost in cell biomanufacturing.

Spinal cord injury often results in devastating consequences for those afflicted, with very few therapeutic options. A central element of spinal cord injuries is astrogliosis, which forms a glial scar that inhibits neuronal regeneration post-injury. Chondroitinase ABC (ChABC) is an enzyme capable of degrading chondroitin sulfate proteoglycan (CSPG), the predominant extracellular matrix component of the glial scar. However, poor protein stability remains a challenge in its therapeutic use. Messenger RNA (mRNA) delivery is an emerging gene therapy technology for in vivo production of difficult-to-produce therapeutic proteins. Here, mineral-coated microparticles as an efficient, non-viral mRNA delivery vehicles to produce exogenous ChABC in situ within a spinal cord lesion are used. ChABC production reduces the deposition of CSPGs in an in vitro model of astrogliosis, and direct injection of these microparticles within a glial scar forces local overexpression of ChABC and improves recovery of motor function seven weeks post-injury.

Summary The retinal pigment epithelium (RPE)-choriocapillaris (CC) complex in the eye is compromised in age-related macular degeneration (AMD) and related macular dystrophies (MDs), yet in vitro models of RPE-CC complex that enable investigation of AMD/MD pathophysiology are lacking. By incorporating iPSC-derived cells into a hydrogel-based extracellular matrix, we developed a 3D RPE-CC model that recapitulates key features of both healthy and AMD/MD eyes and provides modular control over RPE and CC layers. Using this 3D RPE-CC model, we demonstrated that both RPE- and mesenchyme-secreted factors are necessary for the formation of fenestrated CC-like vasculature. Our data show that choroidal neovascularization (CNV) and CC atrophy occur in the absence of endothelial cell dysfunction and are not necessarily secondary to drusen deposits underneath RPE cells, and CC atrophy and/or CNV can be initiated systemically by patient serum or locally by mutant RPE-secreted factors. Finally, we identify FGF2 and matrix metalloproteinases as potential therapeutic targets for AMD/MDs.

Human mesenchymal stromal cells (MSCs) are promising candidates for cell therapy due to their ease of isolation and expansion and their ability to secrete antiapoptotic, pro‐angiogenic, and immunomodulatory factors. Three‐dimensional (3D) aggregation “self‐activates” MSCs to augment their pro‐angiogenic and immunomodulatory potential, but the microenvironmental features and culture parameters that promote optimal MSC immunomodulatory function in 3D aggregates are poorly understood. Here, we generated MSC aggregates via three distinct methods and compared them with regard to their (a) aggregate structure and (b) immunomodulatory phenotype under resting conditions and in response to inflammatory stimulus. Methods associated with fast aggregation kinetics formed aggregates with higher cell packing density and reduced extracellular matrix (ECM) synthesis compared to those with slow aggregation kinetics. While all three methods of 3D aggregation enhanced MSC expression of immunomodulatory factors compared to two‐dimensional culture, different aggregation methods modulated cells' temporal expression of these factors. A Design of Experiments approach, in which aggregate size and aggregation kinetics were systematically covaried, identified a significant effect of both parameters on MSCs' ability to regulate immune cells. Compared to small aggregates formed with fast kinetics, large aggregates with slow assembly kinetics were more effective at T‐cell suppression and macrophage polarization toward anti‐inflammatory phenotypes. Thus, culture parameters including aggregation method, kinetics, and aggregate size influence both the structural properties of aggregates and their paracrine immunomodulatory function. These findings underscore the utility of engineering strategies to control properties of 3D MSC aggregates, which may identify new avenues for optimizing the immunomodulatory function of MSC‐based cell therapies., Mesenchymal stromal cell (MSC) aggregates display augmented immunomodulatory potential that is dependent on aggregate size and formation kinetics. Large, slow‐forming MSC aggregates outperform small, fast‐forming aggregates in their capacity to induce M2 macrophage polarization and suppress T‐cell proliferation. Aggregate size and aggregation kinetics also influence ECM synthesis and packing density, thereby linking aggregation‐dependent structural features to immunomodulatory function in MSC aggregates.

Dictyodes Malloch, 1933 (Diptera: Sciomyzidae) is a new synonym of RetelliaRobineau-Desvoidy, 1830, with Retellia claropunctataRobineau-Desvoidy, 1830 (Tetanocera) serving as the type species of Retellia. Steyskal's (1974) analysis is confirmed, that Malloch (1933) redescribed Tetanocera dictyodesWiedemann, 1830 [as Dictyodes dictyodes] from a specimen that Malloch misidentified as T. dictyodes but which was, in fact, an undescribed species. Retellia platensis (Steyskal, 1974) (Dictyodes) new combination is confirmed as a new synonym of Retellia lacera (Wiedemann, 1830) (Tetanocera) new combination; a lectotype and a paralectotype are designated for the latter species. Steyskal's (1974) designation of Pherbina cayennensisRobineau-Desvoidy, 1830, an unplaced but possibly related species, as a nomen dubium is supported. A key to distinguish species of Retellia from similar-looking species in the Neotropical Region and a key to the two valid species of Retellia are provided. Relationships among Retellia and other genera of Sciomyzidae are discussed.

All reared larvae of flies of the genus Colobaea Zetterstedt, 1837 (Diptera: Sciomyzidae), which comprises 15 valid species, kill and consume freshwater nonoperculate pulmonate snails. New data are presented on the geographic distribution, biology, morphology of immature stages, and classification of Colobaea. Life cycle information is provided from field data and laboratory rearings for four of the 11 Palearctic species—C. bifasciella (Fallén), C. deemingi Knutson & Bratt n.sp., C. pectoralis (Zetterstedt), and C. punctata (Lundbeck)—and for one of the three Nearctic species, C. americana Steyskal. Colobaea bifasciella is shown to be one of the most highly specialized parasitoid Sciomyzini, laying eggs on shells of Galba truncatula (O.F. Müller) and Stagnicola palustris (O.F. Müller) in temporary, intermittent, or vernal semiterrestrial situations. Each larva feeds in only one host snail, which is not killed until shortly before the larva completes development. Puparia are strongly modified to fit tightly within the shell of the host. The other reared species are shown to be less specialized than C. bifasciella, with eggs being laid upon vegetation, the larvae behaving as parasitoids-predators-saprophages of exposed aquatic snails, and the puparia of all four species being adapted to a lesser degree than C. bifasciella to fitting within the shell of the host snail. In nature, C. americana attacks Gyraulus parvus (Say) and Physa Draparnaud sp.; C. pectoralis attacks Anisus vortex (L.) and Bathyomphalus contortus (L.); and C. punctata attacks Gyraulus albus O.F. Müller, Lymnaea “peregra,” Planorbarius corneus (L.), and Planorbis planorbis (L.). In the laboratory, these species also attacked and consumed other freshwater nonoperculate snails; C. deemingi was reared on Gyraulus intermixtus (Mousson) and Radix gedrosiana (Say), and an adult fly of the Palearctic C. distincta (Meigen) emerged from a puparium found in the shell of Anisus spirorbis (L.) collected in nature. Described and figured are eggs, larvae of all three instars, and puparia of the five laboratory-reared species. To provide perspective on features of Colobaea, diagnostic features are summarized of the immature stages of the Sciomyzini and the suprageneric categories of Sciomyzidae. The biogeography of the tribe Sciomyzini is presented, along with details of known geographical distribution. The classification and phylogenetic position of Colobaea are discussed. Included are a checklist of all known taxa of Colobaea, maps of geographic distribution, and a key to adults of the 15 valid species.

There is a vital need to develop in vitro models of the developing human brain to recapitulate the biological effects that toxic compounds have on the brain. To model perineural vascular plexus (PNVP) in vitro, which is a key stage in embryonic development, human embryonic stem cells (hESC)-derived endothelial cells (ECs), neural progenitor cells, and microglia (MG) with primary pericytes (PCs) in synthetic hydrogels in a custom-designed microfluidics device are cocultured. The formation of a vascular plexus that includes networks of ECs (CD31+, VE-cadherin+), MG (IBA1+), and PCs (PDGFRβ+), and an overlying neuronal layer that includes differentiated neuronal cells (βIII Tubulin+, GFAP+) and radial glia (Nestin+, Notch2NL+), are characterized. Increased brain-derived neurotrophic factor secretion and differential metabolite secretion by the vascular plexus and the neuronal cells over time are consistent with PNVP functionality. Multiple concentrations of developmental toxicants (teratogens, microglial disruptor, and vascular network disruptors) significantly reduce the migration of ECs and MG toward the neuronal layer, inhibit formation of the vascular network, and decrease vascular endothelial growth factor A (VEGFA) secretion. By quantifying 3D cell migration, metabolic activity, vascular network disruption, and cytotoxicity, the PNVP model may be a useful tool to make physiologically relevant predictions of developmental toxicity.

We describe a screening approach to identify customized substrates for serum-free human mesenchymal stromal cell (hMSC) culture. In particular, we combine a biomaterials screening approach with design of experiments (DOE) and multivariate analysis (MVA) to understand the effects of substrate stiffness, substrate adhesivity, and media composition on hMSC behavior in vitro. This approach enabled identification of poly(ethylene glycol)-based and integrin binding hydrogel substrate compositions that supported functional hMSC expansion in multiple serum-containing and serum-free media, as well as the expansion of MSCs from multiple, distinct sources. The identified substrates were compatible with standard thaw, seed, and harvest protocols. Finally, we used MVA on the screening data to reveal the importance of serum and substrate stiffness on hMSC expansion, highlighting the need for customized cell culture substrates in optimal hMSC biomanufacturing processes.

Matrigel, a basement-membrane matrix extracted from Engelbreth–Holm–Swarm mouse sarcomas, has been used for more than four decades for a myriad of cell-culture applications. However, Matrigel is limited in its applicability to cellular biology, therapeutic-cell manufacturing and drug discovery, owing to its complex, ill-defined and variable composition. Variations in the mechanical and biochemical properties within a single batch of Matrigel — and between batches — have led to uncertainty in cell-culture experiments and a lack of reproducibility. Moreover, Matrigel is not conducive to physical or biochemical manipulation, making it difficult to fine-tune the matrix to promote intended cell behaviours and achieve specific biological outcomes. Recent advances in synthetic scaffolds have led to the development of xenogenic-free, chemically defined, highly tunable and reproducible alternatives. In this Review, we assess the applications of Matrigel in cell culture, regenerative medicine and organoid assembly, detailing the limitations of Matrigel and highlighting synthetic-scaffold alternatives that have shown equivalent or superior results. Additionally, we discuss the hurdles that are limiting a full transition from Matrigel to synthetic scaffolds and provide a brief perspective on the future directions of synthetic scaffolds for cell-culture applications. Matrigel is widely used for cell culture. However, its ill-defined composition, batch-to-batch variability and animal-derived nature lead to experimental uncertainty and a lack of reproducibility. In this Review, we discuss the limitations of Matrigel and highlight synthetic alternatives for stem-cell culture, regenerative medicine and organoid assembly.

Introduction: Human-induced pluripotent stem cells (iPSCs) represent a promising cell source for the construction of organotypic culture models for chemical toxicity screening and characterization. Materials and Methods: To characterize the effects of chemical exposure on the human neurovasculature, we constructed neurovascular unit (NVU) models consisting of endothelial cells (ECs) and astrocytes (ACs) derived from human-iPSCs, as well as human brain-derived pericytes (PCs). The cells were cocultured on synthetic poly(ethylene glycol) (PEG) hydrogels that guided the self-assembly of capillary-like vascular networks. High-content epifluorescence microscopy evaluated dose-dependent changes to multiple aspects of NVU morphology. Results: Cultured vascular networks underwent quantifiable morphological changes when incubated with vascular disrupting chemicals. The activity of predicted vascular disrupting chemicals from a panel of 38 compounds (U.S. Environmental Protection Agency) was ranked based on morphological features detected in the NVU model. In addition, unique morphological neurovascular disruption signatures were detected per chemical. A comparison of PEG-based NVU and Matrigel(™)-based NVU models found greater sensitivity and consistency in chemical detection by the PEG-based NVU models. Discussion: We suspect that specific morphological changes may be used for discerning adverse outcome pathways initiated by chemical exposure and rapid mechanistic characterization of chemical exposure to neurovascular function. Conclusion: The use of human stem cell-derived vascular tissue and PEG hydrogels in the construction of NVU models leads to rapid detection of adverse chemical effects on neurovascular stability. The use of multiple cell types in coculture elucidates potential mechanisms of action by chemicals applied to the model.

We have designed a lightly crosslinked PEG based copolymer coating with compositional flexibility as well as extended stability for studying human mesenchymal stem cells (hMSCs). Copolymers contain a majority of poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) as a cytophobic background with poly(ethylene glycol) methacrylate (PEGMA) for peptide coupling, and less than 10% glycidyl methacrylate (GMA) for crosslinking. Copolymer thin films were crosslinked into 30 nm thick mats by either thermal treatment or ultraviolet light and were stable for 35 days in water at 37 °C. The amount of PEGMA in the copolymer was optimized to ∼11% to minimize non-specific cell–protein interactions while maximizing the amount of total bound peptides. Following the binding of RGDSP to the mat, hMSCs were seeded. The hMSC adhesion, spreading and focal adhesion complex formation were promoted in a concentration dependent manner. Mats coupled with a non-adhesive scramble (RDGSP) maintained their cytophobicity. Competitive detachment experiments further demonstrated that cell adhesion was mediated by receptor binding to the RGDSP peptide. Cell culture experiments performed at 1 and 2 weeks show that mats can still resist cell adhesion after incubation in a serum containing medium. X-ray photoelectron spectroscopy (XPS) was effectively used to quantify the average total peptide concentration as 12.6 ± 6.14 pmol cm−2. A square 2.2 mm N (1s) element map shows an average value of 17.9 pmol cm−2 of RGDSP, which correlates well with the multipoint high resolution data. The stability of the copolymer, compositional flexibility, ease of application and the ability to precisely quantify bound peptides on the mats make these materials ideal for the study of cellular processes, where stability, functionality and topography of the biointerface are relevant.

Microtissues containing multiple cell types have been used in both in vitro models and in vivo tissue repair applications. However, to improve throughput, there is a need to develop a platform that supports self-assembly of a large number of 3D microtissues containing multiple cell types in a dynamic suspension system. Thus, the objective of this study was to exploit the binding interaction between the negatively charged glycosaminoglycan, heparin, and a known heparin binding peptide to establish a method that promotes assembly of mesenchymal stem cell (MSC) spheroids into larger aggregates. We characterized heparin binding peptide (HEPpep) and heparin coatings on cell surfaces and determined the specificity of these coatings in promoting assembly of MSC spheroids in dynamic culture. Overall, combining spheroids with both coatings promoted up to 70 ± 11% of spheroids to assemble into multiaggregate structures, as compared to only 10 ± 4% assembly when cells having the heparin coating were cultured with cells coated with a scrambled peptide. These results suggest that this self-assembly method represents an exciting approach that may be applicable for a wide range of applications in which cell aggregation is desired.

Endogenous recruitment of circulating angiogenic cells (CACs) is an emerging strategy to induce angiogenesis within a defect site, and multiple recent strategies have deployed soluble protein releasing biomaterials for this purpose. However, the way in which the design of biomaterials affects CAC recruitment and invasion are poorly understood. Here we used an enhanced-throughput cell invasion assay to systematically examine the effects of biomaterial design on CAC recruitment. The screens co-optimized hydrogel presentation of a stromal-derived factor-1α (SDF-1α) gradient, hydrogel degradability, and hydrogel stiffness for maximal CAC invasion. We also examined the specificity of this invasion by assessing dermal fibroblast, mesenchymal stem cell, and lymphocyte invasion individually and in co-culture with CACs to identify hydrogels specific to CAC invasion. These screens suggested a subset of MMP-degradable hydrogels presenting a specific range of SDF-1α gradient slopes that induced specific invasion of CACs, and we posit that the design parameters of this subset of hydrogels may serve as instructive templates for the future design of biomaterials to specifically recruit CACs. We also posit that this design concept may be applied more broadly in that it may be possible to utilize these specific subsets of biomaterials as “filters” to control which types of cell populations invade into and populate the biomaterial. Statement of Significance The recruitment of specific cell types for cell-based therapies in vivo is of great interest to the regenerative medicine community. Circulating angiogenic cells (CACs), CD133+ cells derived from the blood stream, are of particular interest for induction of angiogenesis in ischemic tissues, and recent studies utilizing soluble-factor releasing biomaterials to recruit these cells in vivo show great promise. However, these studies are largely “proof of concept” and are not systematic in nature. Thus, little is currently known about how biomaterial design affects the recruitment of CACs. In the present work, we use a high throughput cell invasion screening platform to systematically examine the effects of biomaterial design on circulating angiogenic cell (CAC) recruitment, and we successfully screened 263 conditions at 3 replicates each. Our results identify a particular subset of conditions that robustly recruit CACs. Additionally, we found that these conditions also specifically recruited CACs and excluded the other tested cells types of dermal fibroblasts, mesenchymal stem cells, and lymphocytes. This suggests an intriguing new role for biomaterials as “filters” to control the types of cells that invade and populate that biomaterial.

The aim of the present study was to test sample reproducibility for model neural tissues formed on synthetic hydrogels. Human embryonic stem (ES) cell-derived precursor cells were cultured on synthetic poly(ethylene glycol) (PEG) hydrogels to promote differentiation and self-organization into model neural tissue constructs. Neural progenitor, vascular, and microglial precursor cells were combined on PEG hydrogels to mimic developmental timing, which produced multicomponent neural constructs with 3D neuronal and glial organization, organized vascular networks, and microglia with ramified morphologies. Spearman’s rank correlation analysis of global gene expression profiles and a comparison of coefficient of variation for expressed genes demonstrated that replicate neural constructs were highly uniform to at least day 21 for samples from independent experiments. We also demonstrate that model neural tissues formed on PEG hydrogels using a simplified neural differentiation protocol correlated more strongly to in vivo brain development than samples cultured on tissue culture polystyrene surfaces alone. These results provide a proof-of-concept demonstration that 3D cellular models that mimic aspects of human brain development can be produced from human pluripotent stem cells with high sample uniformity between experiments by using standard culture techniques, cryopreserved cell stocks, and a synthetic extracellular matrix. Impact statement Pluripotent stem (PS) cells have been characterized by an inherent ability to self-organize into 3D “organoids” resembling stomach, intestine, liver, kidney, and brain tissues, offering a potentially powerful tool for modeling human development and disease. However, organoid formation must be quantitatively reproducible for applications such as drug and toxicity screening. Here, we report a strategy to produce uniform neural tissue constructs with reproducible global gene expression profiles for replicate samples from multiple experiments.

Mouse digit tip regeneration involves an intricate coordinated regrowth of the terminal phalanx, nail, dermis and epidermis. During this time, regenerating digits undergo wound healing, blastema formation, and differentiation. However, the regenerative response of the digit is dependent on the level of the amputation. Amputation of 60% P3 removal results in no regeneration. This level-dependent regenerative ability of the mouse digit provides a comparative model between regeneration and non-regeneration that may enable identification of specific factors critical to regeneration. Although the ability to create regenerating and non-regenerating conditions has been well established, the regenerative response between these regions ("intermediate" zone) has received less scrutiny, and may add insight to the regenerative processes, including the degree of histolysis, and the level of blastema formation. The objective of this study is then to compare the regeneration capacity between amputation levels within the regenerating ( 60%) regions. Results indicated that regenerative and intermediate amputations led to significant histolysis and blastema formation of the distal phalanx 14 days post-amputation. Unlike the regenerating digits, intermediate amputations led to incomplete regeneration whereby regrowth of the digits were not to the levels of the intact or regenerating digits. Non-regenerating amputations did not exhibit significant histolysis or blastema formation. Remarkably, the histolytic process resulted in day 14 P3 lengths that were similar regardless of the initial amputation over 19%. The differences in histolysis, blastema formation and injury outcomes were also marked by changes in the number of proliferating cells and osteoclasts. Altogether, these results indicate that although intermediate amputations result in histolysis and blastema formation similar to regenerating digits, the resulting cellular composition of the blastema differs, contributing to incomplete regeneration.

Summary A defined protocol for efficiently deriving endothelial cells from human pluripotent stem cells was established and vascular morphogenesis was used as a model system to understand how synthetic hydrogels influence global biological function compared with common 2D and 3D culture platforms. RNA sequencing demonstrated that gene expression profiles were similar for endothelial cells and pericytes cocultured in polyethylene glycol (PEG) hydrogels or Matrigel, while monoculture comparisons identified distinct vascular signatures for each cell type. Endothelial cells cultured on tissue-culture polystyrene adopted a proliferative phenotype compared with cells cultured on or encapsulated in PEG hydrogels. The proliferative phenotype correlated to increased FAK-ERK activity, and knockdown or inhibition of ERK signaling reduced proliferation and expression for cell-cycle genes while increasing expression for “3D-like” vasculature development genes. Our results provide insight into the influence of 2D and 3D culture formats on global biological processes that regulate cell function., Graphical Abstract, Highlights • Defined, high-efficiency differentiation of human PSCs to endothelial cell • Comprehensive genome-wide comparisons of 2D and 3D cell-culture formats • Gene expression profiles for endothelial cells and pericytes in 3D cell culture • Highly proliferative phenotypes on tissue-culture polystyrene surfaces, Murphy, Schwartz and colleagues report a genome-wide analysis of biological function for endothelial cells and pericytes cultured using 2D or 3D formats. Global gene expression patterns are comparable for vascular cells cultured in synthetic hydrogels or Matrigel during vascular network formation, while cells cultured on tissue-culture polystyrene surfaces adopt a proliferative phenotype that correlates to increased FAK-ERK activity.

As a result of improved relevance to in vivo physiology, in vitro studies are increasingly performed in diverse, three-dimensional (3D) biomaterials. However, material-cell type pairing effects on cytokine availability remain unclear. We cultured five cell types in agarose, alginate, collagen, Matrigel, or RGD-functionalized polyethylene glycol (PEG) hydrogels. We measured 21 cytokines in the conditioned media, and we identified differences in measured cytokine levels that were cell-type- or material-dependent. We further evaluated our data using principal component analysis. Interestingly, component one identified two classes of biomaterials with characteristic cytokine expression levels. Component two identified cell-type-dependent differences in cytokines related to the wound response. Although elements of soluble cytokine availability are shared despite parameter differences, material and cellular properties variably influenced cytokine levels, underlining the influence of biomaterial-cell type pairings on in vitro assay outcomes. Relationships between material properties, cellular responses, and cytokine availability in 3D in vitro models warrant further investigation.

Extracellular matrix (ECM) mimicking hydrogel scaffolds have greatly improved the physiological relevance of in vitro assays, but introduce another dimension that creates variability in cell related readouts when compared to traditional 2D cells-on-plastic assays. We have developed a synthetic poly(ethylene glycol) (PEG) based ECM mimicking hydrogel and tested it against two gold standard animal-based naturally derived hydrogel scaffolds in MCF7 cell response. We have used the percent coefficient of variation (CV) as a metric to evaluate the reproducibility of said responses. Results indicated that PEG hydrogels performed similarly to naturally derived gold standards, and variance was similar in basic characterization assays, such as viability and cell adherence. PEG based hydrogels had lower CV values in estrogen receptor driven responses to several doses of estrogen in both estrogen receptor transactivation and estrogen induced proliferation.

The status of the 20 genera comprising at least 60 species of Sciomyzidae known from China is reviewed. Ten genera are recorded for the first time from China. A diagnostic key to all genera known from China is provided along with figures of the main characters. The geographic distribution of every genus known from China is discussed and distribution maps are presented. Recorded for the first time in the Oriental Region are 2 genera (Coremacera Rondani, 1856 and Pherbina Robineau-Desvoidy, 1830) and 5 species (in Dichetophora Rondani, 1868, Pherbellia Robineau-Desvoidy, 1830, and Tetanocera Duméril, 1800). Euthycera meleagris Hendel, 1933, previously synonymized with Dichetophora meleagris (Hendel, 1933), is resurrected as a valid name. Pherbellia brevistriata Li, Yang & Gu, 2001 is placed as a junior synonym of Pherbellia nana reticulata (Thomson, 1869). Reported for the first time are the female of Pherbellia ditoma Steyskal, 1956 and the male of Pherbellia orientalis Rozkošný & Knutson, 1991, both discovered in China during this study.

Early assessment of adverse drug effects in humans is critical to avoid long-lasting harm. However, current approaches for early detection of adverse effects still lack predictive and organ-specific biomarkers to evaluate undesired responses in humans. Microphysiological systems (MPSs) are in vitro representations of human tissues and provide organ-specific translational insights for physiological processes. In this study, a brain MPS was utilized to assess molecular signatures of neurotoxic and non-neurotoxic compounds using targeted and untargeted molecular approaches. The brain MPS comprising of human embryonic stem (ES) cell-derived neural progenitor cells seeded on three-dimensional (3D), chemically defined, polyethylene glycol hydrogels was treated with the neurotoxic drug, bortezomib and the non-neurotoxic drug, tamoxifen over 14-days. Possible toxic effects were monitored with human N-acetylaspartic acid (NAA) kinetics, which correlates the neuronal function/health and DJ-1/PARK7, an oxidative stress biomarker. Changes in NAA levels were observed as early as 2-days post-bortezomib treatment, while onset detection of oxidative stress (DJ-1) was delayed until 4-days post-treatment. Separately, the untargeted extracellular metabolomics approach revealed distinct fingerprints 2-days post-bortezomib treatment as perturbations in cysteine and glycerophospholipid metabolic pathways. These results suggest accumulation of reactive oxygen species associated with oxidative stress, and disruption of membrane structure and integrity. The NAA response was strongly correlated with changes in a subset of the detected metabolites at the same time point 2-days post-treatment. Moreover, these metabolite changes correlated strongly with DJ-1 levels measured at the later time point (4-days post-treatment). This suggests that early cellular metabolic dysfunction leads to later DJ-1 leakage and cell death, and that early measurement of this subset of metabolites could predict the later occurrence of cell death. While the approach demonstrated here provides an individual case study for proof of concept, we suggest that this approach can be extended for preclinical toxicity screening and biomarker discovery studies.

Orthopedic research relies heavily on animal models to study mechanisms of bone healing in vivo as well as investigate the new treatment techniques. Critical-sized segmental defects are challenging to treat clinically, and research efforts could benefit from a reliable, ambulatory small animal model of a segmental femoral defect. In this study, we present an optimized surgical protocol for the consistent and reproducible creation of a 5 mm critical diaphyseal defect in a rat femur stabilized with an external fixator. The diaphyseal ostectomy was performed using a custom jig to place 4 Kirschner wires bicortically, which were stabilized with an adapted external fixator device. An oscillating bone saw was used to create the defect. Either a collagen sponge alone or a collagen sponge soaked in rhBMP-2 was implanted into the defect, and the bone healing was monitored over 12 weeks using radiographs. After 12 weeks, rats were sacrificed, and histological analysis was performed on the excised control and treated femurs. Bone defects containing only collagen sponge resulted in non-union, while rhBMP-2 treatment yielded the formation of a periosteal callous and new bone remodeling. Animals recovered well after implantation, and external fixation proved successful in stabilizing the femoral defects over 12 weeks. This streamlined surgical model could be readily applied to study bone healing and test new orthopedic biomaterials and regenerative therapies in vivo.

Atrophic non-unions are a major clinical problem. Mineral coated microparticles (MCM) are electrolyte-coated hydroxyapatite particles that have been shown in vitro to bind growth factors electrostatically and enable a tuneable sustained release. Herein, we studied whether MCM can be used in vivo to apply Bone Morphogenetic Protein-2 (BMP-2) to improve bone repair of atrophic non-unions. For this purpose, atrophic non-unions were induced in femurs of CD-1 mice (n = 48). Animals either received BMP-2-coated MCM (MCM + BMP; n = 16), uncoated MCM (MCM; n = 16) or no MCM (NONE; n = 16). Bone healing was evaluated 2 and 10 weeks postoperatively by micro-computed tomographic (µCT), biomechanical, histomorphometric and immunohistochemical analyses. µCT revealed more bone volume with more highly mineralised bone in MCM + BMP femurs. Femurs of MCM + BMP animals showed a significantly higher bending stiffness compared to other groups. Histomorphometry further demonstrated that the callus of MCM + BMP femurs was larger and contained more bone and less fibrous tissue. After 10 weeks, 7 of 8 MCM + BMP femurs presented with complete osseous bridging, whereas NONE femurs exhibited a non-union rate of 100 %. Of interest, immunohistochemistry could not detect macrophages within the callus, indicating a good biocompatibility of MCM. In conclusion, the local application of BMP-2-coated MCM improved bone healing in a challenging murine non-union model and, thus, should be of clinical interest in the treatment of non-unions.

Vascular endothelial growth factor (VEGF) spatial and temporal activity must be tightly controlled during angiogenesis to form perfusable vasculature in a healing wound. The native extracellular matrix (ECM) regulates growth factor activity locally via sequestering, and researchers have used ECM-mimicking approaches to regulate the activity of VEGF in cell culture and in vivo. However, the impact of dynamic, affinity-mediated growth factor sequestering has not been explored in detail with biomaterials. Here, we sought to modulate VEGF activity dynamically over time using poly(ethylene glycol) microspheres containing VEGF-binding peptides (VBPs) and exhibiting varying degradation rates. The degradation rate of VBP microspheres conferred a differential ability to up- or down-regulate VEGF activity in culture with primary human endothelial cells. VBP microspheres with fast-degrading crosslinks reduced VEGF activity and signaling, while VBP microspheres with no inherent degradability sequestered and promoted VEGF activity in culture with endothelial cells. VBP microspheres with degradable crosslinks significantly reduced neovascularization in vivo, but neither non-degradable VBP microspheres nor bolus delivery of soluble VBP reduced neovascularization. The covalent incorporation of VBP to degradable microspheres was required to reduce neovascularization in a mouse model of choroidal neovascularization in vivo, which demonstrates a potential clinical application of degradable VBP microspheres to reduce pathological angiogenesis. The results herein highlight the ability to modulate the activity of a sequestered growth factor by changing the crosslinker identity within PEG hydrogel microspheres. The insights gained here may instruct the design and translation of affinity-based growth factor sequestering biomaterials for regenerative medicine applications.

Activation of vascular endothelial cells (ECs) by growth factors initiates a cascade of events during angiogenesis in vivo consisting of EC tip cell selection, sprout formation, EC stalk cell proliferation, and ultimately vascular stabilization by support cells. Although EC functional assays can recapitulate one or more aspects of angiogenesis in vitro , they are often limited by undefined substrates and lack of dependence on key angiogenic signaling axes . Here, we designed and characterized a chemically-defined model of endothelial sprouting behavior in vitro using human induced pluripotent stem cell-derived endothelial cells (iPSC-ECs). We rapidly encapsulated iPSC-ECs at high density in poly(ethylene glycol) (PEG) hydrogel spheres using thiol-ene chemistry and subsequently encapsulated cell-dense hydrogel spheres in a cell-free hydrogel layer. The hydrogel sprouting array supported pro-angiogenic phenotype of iPSC-ECs and supported growth factor-dependent proliferation and sprouting behavior. iPSC-ECs in the sprouting model responded appropriately to several reference pharmacological angiogenesis inhibitors of vascular endothelial growth factor, NF-κB, matrix metalloproteinase-2/9, protein kinase activity, and β-tubulin, which confirms their functional role in endothelial sprouting. A blinded screen of 38 putative vascular disrupting compounds from the US Environmental Protection Agency’s ToxCast library identified six compounds that inhibited iPSC-EC sprouting and five compounds that were overtly cytotoxic to iPSC-ECs at a single concentration. The chemically-defined iPSC-EC sprouting model (iSM) is thus amenable to enhanced-throughput screening of small molecular libraries for effects on angiogenic sprouting and iPSC-EC toxicity assessment. Statement of Significance Angiogenesis assays that are commonly used for drug screening and toxicity assessment applications typically utilize natural substrates like Matrigel TM that are difficult to spatially pattern, costly, ill-defined, and may exhibit lot-to-lot variability. Herein, we describe a novel angiogenic sprouting assay using chemically-defined, bioinert poly(ethylene glycol) hydrogels functionalized with biomimetic peptides to promote cell attachment and degradation in a reproducible format that may mitigate the need for natural substrates. The quantitative assay of angiogenic sprouting here enables precise control over the initial conditions and can be formulated into arrays for screening. The sprouting assay here was dependent on key angiogenic signaling axes in a screen of angiogenesis inhibitors and a blinded screen of putative vascular disrupting compounds from the US-EPA.