Search

Solution viscosities (η) and protein-protein interactions (PPI) of three monoclonal antibodies (mAb-A, mAb-B, mAb-C), two bispecific antibodies (BsAb-A/B, BsAb-A/C), and two 1:1 binary mixtures (mAb-A + mAb-B and mAb-A + mAb-C) were measured. mAb-A and mAb-C have similar isoelectric point (pI) values but significantly different η versus protein concentration ( c2) profiles. The viscosity of the mAb-A + mAb-C mixture followed an Arrhenius mixing rule and was identical to viscosity of the bispecific BsAb-A/C. In contrast, mAb-A and mAb-B had similar η versus c2 profiles, but the Arrhenius mixing rule failed to predict the higher viscosities of their mixtures. The viscosity of the bispecific BsAb-A/B followed the 1:1 mAb-A + mAb-B mixture at all concentrations. The nature of the interactions for mAb-A, mAb-B, the BsAb-A/B bispecific, and the 1:1 mAb-A + mAb-B mixture were characterized by static and dynamic light scattering (SLS and DLS). mAb-A and mAb-B exhibited net-attractive and -repulsive electrostatic interactions, respectively. The bispecific antibody (BsAb-A/B) had short-ranged attractive interactions, suggesting that the increase in viscosity for this molecule and the mAb-A + mAb-B mixture was due to cross-interactions between Fab regions. At high and low ionic strengths and protein concentrations, the Rayleigh scattering profile, the collective diffusion coefficient, and viscosity for the mixture closely followed that for the bispecific antibody. These results highlight the possible anomalous viscosity increases of bispecific antibodies constructed from relatively low-viscosity mAbs but demonstrates a potentially fruitful approach of using mAb mixtures to predict the viscosity of candidate bispecific constructs.

Video-based particle tracking microrheology that requires ∼2 μl per sample is used to measure the viscosity of protein solutions of monoclonal antibodies. Direct imaging provides an immediate assessment of probe stability and the validity of the microrheology measurement. Precise measurements are made by choosing a displacement lag time that is a balance between minimizing tracking error while maximizing the number of sampled particle displacements. The excess kurtosis α2 of the probe displacement probability distribution and its test statistic Zα2 are used to set the optimal lag time. The viscosity is calculated by fitting a Gaussian distribution to the sampled displacements. Microrheology viscosities for two monoclonal antibody solutions are in good agreement with bulk rheology. Using a similar comparison of the microrheology of sucrose solutions with a correlation relating viscosity and concentration, an analysis of covariance (p = 0.941) demonstrates the high accuracy of small volume microrheology mea...

A critical part of the clinical development path for a therapeutic antibody involves evaluating the physical and chemical stability of candidate molecules throughout the manufacturing process. In particular, the risks of chemical liabilities that can impact antigen binding, such as deamidation, oxidation, and isomerization in the antibody CDR sequences, need to be controlled through formulation development or eliminated by replacing the amino acid motif displaying the chemical instability. Commonly, the antibody CDR sequence contains multiple sequence motifs (potential hotspots) for chemical instability. However, only a subset of these motifs results in actual chemical modification, and thus, experimental assessment of the extent of instability is necessary to identify positions for potential sequence engineering. Ideally, this information should be available prior to antibody humanization at the stage of parental rodent antibody identification. Early knowledge of liabilities allows for ranking of clones or the mitigation of liabilities by concurrent engineering with the antibody humanization process instead of time-consuming sequential activities. However, concurrent engineering of chemical liabilities and humanization requires translatability of the chemical modifications from the rodent parental antibody to the humanized. We experimentally compared the stability of all sequence motifs by mass spectrometric peptide mapping between the rodent parental antibody and the final humanized antibody and observed a linear correlation. These results have enabled a streamlined developability assessment process for therapeutic antibodies from lead discovery to clinical development.

Flexible plastic bags are the container of choice for most intravenous (i.v.) infusions. Under certain circumstances, however, the air-liquid interface present in these i.v. bags can lead to physical instability of protein biopharmaceuticals, resulting in product aggregation. In principle, the air headspace present in the bags can be removed to increase drug stability, but experiments described here show that this can result in incomplete draining of solution from the bag using gravity delivery, or generation of negative pressure in the bag when an infusion pump is used. It is expected that these issues could lead to incomplete delivery of medication to patients or pump-related problems, respectively. However, here it is shown that contrary to the standard pharmacy practice of using nonvented spikes with i.v. bags, the use of vented spikes with i.v. bags that lack air headspace allows complete delivery of the dose solution without impacting the physical stability of a protein-based drug.

Controversy over polity, particularly on the parish level, agitated the American Catholic church in the antebellum period. Condemned as “trusteeism,” demands for a strong lay role in parochial government seemed settled in the bishops’ favor by the Civil War. But in the early twentieth century, a prominent Polish American editor reopened the issue. Michael Kruszka, an ethnic nationalist and anti-clericalist, established the Federation of Polish Catholic Laymen in 1911, providing institutional form to demands for parish democracy, the appointment of ethnic bishops, and other goals. He utilized the common Polonian structure of a fraternal benefit society to undergird his ideological appeal. Dozens of lodges appeared in Polish parishes, mostly in the Midwest. The Federation quickly aroused opposition from bishops and loyalist Polish priests, igniting quarrels, and dividing many parishes. Since promotion of the Federation was conducted in a foreign language and Kruszka made no effort to seek non-Polish allies, the episcopate was able to confine the controversy to one ethnic group. The outbreak of World War I in 1914, which offered new prospects for independence of the homeland, drew Kruszka’s attention to matters of nationalism and his interest in the Federation waned. His death in 1918 removed the main promoter of polity change. By the end of the war, the Federation had shifted its focus to fraternalism and the movement for change in governance receded into history.

Highly concentrated protein solutions are becoming increasingly commonplace within the biopharmaceutical industry as more products are developed that feature high doses of drug intended for subcutaneous administration. An as-yet undeveloped subclass of these products feature multiple proteins coformulated together in high-concentration protein mixtures. Previous work has illustrated that the viscosity of aqueous solutions of various proteins at high concentrations can be remarkably different across otherwise similar molecules. This work characterizes the viscosity behavior of mixtures of such proteins, primarily monoclonal antibodies, and shows that a simple mixing rule first proposed by Arrhenius predicts the viscosity of an arbitrary mixture. This approach is shown to successfully calculate the viscosity of mixtures of proteins ranging up to 250 mg/mL total protein concentration and approximately 1700 cP at different ionic strengths and with accuracy errors of less than 10%. Only information about the viscosity of the isolated protein components of the mixture is required for the calculations.

The conjugation of hydrophobic cytotoxic agents such as monomethyl auristatin E (MMAE) to the interchain sulfhydryl groups of monoclonal antibodies (Mabs) through a protease-labile linker generates a heterogeneous drug load distribution. The conjugation process can generate high-drug-load species that can affect the physical stability of antibody-drug conjugates (ADCs). In this study, the mechanism of physical instability of ADCs was investigated by formulating the ADC pool as well as isolated drug load species in high and low ionic strength buffers to understand the effect of ionic strength on the stability of drug-conjugated Mabs. The results showed that the presence of high ionic strength buffer led to time-dependent aggregate and fragment formation of ADCs, predominantly ADCs with high-drug-load species under stress conditions. In addition, differential scanning calorimetry (DSC) results confirmed that there is a direct correlation between thermal unfolding and drug payload and that specific changes in the DSC thermogram profiles can be assigned to modifications by MMAE.

Formulation development of an ADC resembles that of a conventional antibody, but the conjugated form introduces new molecular attributes such as drug-to-antibody ratio and stability of the drug itself that need to be considered. An extended set of analytical tools, coupled with understanding of how ADCs and conventional antibodies differ in terms of their stability, guides formulation selection.

Formulation development of an ADC resembles that of a conventional antibody, but the conjugated form introduces new molecular attributes such as drug-to-antibody ratio and stability of the drug itself that need to be considered. An extended set of analytical tools, coupled with understanding of how ADCs and conventional antibodies differ in terms of their stability, guides formulation selection.

Microfluidic stickers are used as a sample environment to measure the microrheology of monoclonal antibody (mAb) protein solutions. A Peltier-based microscope stage is implemented and validated, and is capable of controlling the sample temperature over the range 0.9–40 °C. The design accounts for heat transfer to and from the objective, controls the sample environment humidity to mitigate condensation, and provides adequate damping to reduce vibration from the cooling system. A concentrated sucrose solution is used as a standard sample to provide an in situ temperature measurement by the Stokes-Einstein-Sutherland relation. By combining microfluidic stickers and microrheology, 72 temperature-concentration viscosity measurements of mAb solutions can be made in 1 day, a significant increase in throughput over conventional rheometry.

Antibody drug conjugates enable the targeted delivery of potent chemotherapeutic agents directly to cancerous cells. They are made by the chemical conjugation of cytotoxins to monoclonal antibodies, which can be achieved by first reducing interchain disulfide bonds followed by conjugation of the resulting free thiols with drugs. This process yields a controlled, but heterogeneous, population of conjugated products that contains species with various numbers of drugs linked to different former interchain disulfide cysteine residues on the antibodies. We have developed a mathematical approach using inputs from capillary electrophoresis and hydrophobic interaction chromatography to determine the positional isomer distribution within a population of antibody drug conjugates. The results are confirmed by analyzing isolated samples of specific drug-to-antibody ratio species. The procedure is amenable to rapid determination of positional isomer distributions and features low material requirements. A survey of several antibody drug conjugates based on the same IgG framework and small molecule drug combination has shown a very similar distribution of isomers among all of the molecules using this technique, suggesting a robust conjugation process.

Detection and characterization of molecular interactions on membrane surfaces is important to biological and pharmacological research. Here, silver nanocubes interfaced with glass-supported model membranes form a label-free sensor that measures protein binding to the membrane. The technique utilizes plasmon resonance scattering of nanocubes, which are chemically coupled to the membrane. In contrast to other plasmonic sensing techniques, this method features simple, solution-based device fabrication and readout. Static and dynamic protein/membrane binding are monitored and quantified.

Routine quantitative analysis of biomolecule surface density by fluorescence microscopy has been limited by the difficulty of preparing appropriate calibration standards that relate measured fluorescence intensity to actual surface concentration. Supported lipid bilayers are planar fluid films of uniform density and composition which can incorporate a variety of lipidated fluorophores and work well as fluorescence standards. Here, we outline a straightforward strategy to calibrate digital micrographs of fluorescent surfaces such as planar cellular junctions for comparison to supported bilayer standards. It can be implemented with standard microscopy equipment. To illustrate the advantages of this approach, we quantify cell- and bilayer-side protein density patterns in a hybrid immunological synapse between a T-cell and a supported bilayer.

Setting the parameters of education for the prototypical Janek (Johnny) required a series of important decisions. Definition of the teaching corps, curriculum, and authority structure were negotiated among priests, teach? ers, ethnic leaders, and parents. The Polish-American press took a lively and continual interest, with editors publicizing the discussion while vigorously offering their opinions. Outsiders, such as diocesan superintendents of education and the public education establishment, also influenced school development. Finally, the formation of Polish-American Roman Catholic elementary education occurred in the context of an evolving ethnic iden? tity which conditioned continuity and innovation. Students of Polonian1 education have examined the topic from sev? eral perspectives. Internal histories of communities of religious women have usually stressed their heroic sacrifices for ethnic instruction.2 Studies by outside scholars have varied more, but the consequence too often has been