Search

Many journals in ecology and evolutionary biology encourage or require authors to make their data and code available alongside articles. In this study we investigated how often this data and code could be used together, when both were available, to computationally reproduce results published in articles. We surveyed the data and code sharing practices of 177 meta-analyses published in ecology and evolutionary biology journals published between 2015-17: 60% of articles shared data only, 1% shared code only, and 15% shared both data and code. In each of the articles which had shared both (n = 26), we selected a target result and attempted to reproduce it. Using the shared data and code files, we successfully reproduced the targeted results in 27-73% of the 26 articles, depending on the stringency of the criteria applied for a successful reproduction. The results from this sample of meta-analyses in the 2015-17 literature can provide a benchmark for future meta-research studies gauging the computational reproducibility of published research in ecology and evolutionary biology., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Kambouris et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

This paper explores judgements about the replicability of social and behavioural sciences research and what drives those judgements. Using a mixed methods approach, it draws on qualitative and quantitative data elicited from groups using a structured approach called the IDEA protocol ('investigate', 'discuss', 'estimate' and 'aggregate'). Five groups of five people with relevant domain expertise evaluated 25 research claims that were subject to at least one replication study. Participants assessed the probability that each of the 25 research claims would replicate (i.e. that a replication study would find a statistically significant result in the same direction as the original study) and described the reasoning behind those judgements. We quantitatively analysed possible correlates of predictive accuracy, including self-rated expertise and updating of judgements after feedback and discussion. We qualitatively analysed the reasoning data to explore the cues, heuristics and patterns of reasoning used by participants. Participants achieved 84% classification accuracy in predicting replicability. Those who engaged in a greater breadth of reasoning provided more accurate replicability judgements. Some reasons were more commonly invoked by more accurate participants, such as 'effect size' and 'reputation' (e.g. of the field of research). There was also some evidence of a relationship between statistical literacy and accuracy., Competing Interests: We declare we have no competing interests., (© 2023 The Authors.)

Overcoming the sluggish electrode kinetics of both oxygen reduction and evolution reactions (ORR/OER) with non-precious metal electrocatalysts will accelerate the development of rechargeable metal-air batteries and regenerative fuel cells. The authors investigated the electrochemical behavior and ORR/OER catalytic activity of core-porous shell Mn/Mn 3 O 4 nanoparticles in comparison with other manganese dioxides (β- and γ-MnO 2 ), and benchmarked against Pt/C and Pt/C-IrO 2 . Under reversible operation in O 2 -saturated 5 M KOH at 22 °C, the early stage activity of core-shell Mn/Mn 3 O 4 shows two times higher ORR and OER current density compared to the other MnO 2 structures at 0.32 and 1.62 V versus RHE, respectively. It is revealed that Mn(III) oxidation to Mn(IV) is the primary cause of Mn/Mn 3 O 4 activity loss during ORR/OER potential cycling. To address it, an electrochemical activation method using Co(II) is proposed. By incorporating Co(II) into MnO x , new active sites are introduced and the content of Mn(II) is increased, which can stabilize the Mn(III) sites through comproportionation with Mn(IV). The Co-incorporated Mn/Mn 3 O 4 has superior activity and durability. Furthermore, it also surpassed the activity of Pt/C-IrO 2 with similar durability. This study demonstrates that cost-effective ORR/OER catalysis is possible., (© 2023 The Authors. Small published by Wiley-VCH GmbH.)

As replications of individual studies are resource intensive, techniques for predicting the replicability are required. We introduce the repliCATS (Collaborative Assessments for Trustworthy Science) process, a new method for eliciting expert predictions about the replicability of research. This process is a structured expert elicitation approach based on a modified Delphi technique applied to the evaluation of research claims in social and behavioural sciences. The utility of processes to predict replicability is their capacity to test scientific claims without the costs of full replication. Experimental data supports the validity of this process, with a validation study producing a classification accuracy of 84% and an Area Under the Curve of 0.94, meeting or exceeding the accuracy of other techniques used to predict replicability. The repliCATS process provides other benefits. It is highly scalable, able to be deployed for both rapid assessment of small numbers of claims, and assessment of high volumes of claims over an extended period through an online elicitation platform, having been used to assess 3000 research claims over an 18 month period. It is available to be implemented in a range of ways and we describe one such implementation. An important advantage of the repliCATS process is that it collects qualitative data that has the potential to provide insight in understanding the limits of generalizability of scientific claims. The primary limitation of the repliCATS process is its reliance on human-derived predictions with consequent costs in terms of participant fatigue although careful design can minimise these costs. The repliCATS process has potential applications in alternative peer review and in the allocation of effort for replication studies., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Fraser et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The ever-increasing demand for flexible and portable electronics has stimulated research and development in building advanced electrochemical energy devices which are lightweight, ultrathin, small in size, bendable, foldable, knittable, wearable, and/or stretchable. In such flexible and portable devices, semi-solid/solid electrolytes besides anodes and cathodes are the necessary components determining the energy/power performances. By serving as the ion transport channels, such semi-solid/solid electrolytes may be beneficial to resolving the issues of leakage, electrode corrosion, and metal electrode dendrite growth. In this paper, the fundamentals of semi-solid/solid electrolytes (e.g., chemical composition, ionic conductivity, electrochemical window, mechanical strength, thermal stability, and other attractive features), the electrode-electrolyte interfacial properties, and their relationships with the performance of various energy devices (e.g., supercapacitors, secondary ion batteries, metal-sulfur batteries, and metal-air batteries) are comprehensively reviewed in terms of materials synthesis and/or characterization, functional mechanisms, and device assembling for performance validation. The most recent advancements in improving the performance of electrochemical energy devices are summarized with focuses on analyzing the existing technical challenges (e.g., solid electrolyte interphase formation, metal electrode dendrite growth, polysulfide shuttle issue, electrolyte instability in half-open battery structure) and the strategies for overcoming these challenges through modification of semi-solid/solid electrolyte materials. Several possible directions for future research and development are proposed for going beyond existing technological bottlenecks and achieving desirable flexible and portable electrochemical energy devices to fulfill their practical applications. It is expected that this review may provide the readers with a comprehensive cross-technology understanding of the semi-solid/solid electrolytes for facilitating their current and future researches on the flexible and portable electrochemical energy devices.

The Arctic is among the fastest-warming areas of the globe. Understanding the impact of climate change on foundational Arctic marine species is needed to provide insight on ecological resilience at high latitudes. Marine forests, the underwater seascapes formed by seaweeds, are predicted to expand their ranges further north in the Arctic in a warmer climate. Here, we investigated whether northern habitat gains will compensate for losses at the southern range edge by modelling marine forest distributions according to three distribution categories: cryophilic (species restricted to the Arctic environment), cryotolerant (species with broad environmental preferences inclusive but not limited to the Arctic environment), and cryophobic (species restricted to temperate conditions) marine forests. Using stacked MaxEnt models, we predicted the current extent of suitable habitat for contemporary and future marine forests under Representative Concentration Pathway Scenarios of increasing emissions (2.6, 4.5, 6.0, and 8.5). Our analyses indicate that cryophilic marine forests are already ubiquitous in the north, and thus cannot expand their range under climate change, resulting in an overall loss of habitat due to severe southern range contractions. The extent of marine forests within the Arctic basin, however, is predicted to remain largely stable under climate change with notable exceptions in some areas, particularly in the Canadian Archipelago. Succession may occur where cryophilic and cryotolerant species are extirpated at their southern range edge, resulting in ecosystem shifts towards temperate regimes at mid to high latitudes, though many aspects of these shifts, such as total biomass and depth range, remain to be field validated. Our results provide the first global synthesis of predicted changes to pan-Arctic coastal marine forest ecosystems under climate change and suggest ecosystem transitions are unavoidable now for some areas., (© 2022 The Authors. Global Change Biology published by John Wiley & Sons Ltd.)

Nano-carbon-based materials are widely reported as lithium host materials in lithium metal batteries (LMBs); however, researchers report contradictory claims as to where the lithium plating occurs. Herein, the use of pure hollow core-carbon spheres coated on Cu (PHCCSs@Cu) to study the lithium deposition behavior with respect to this type of structure in lithium anode-free cells is described. It is demonstrated that the lithium showed some initial and limited intercalation into the PHCCSs and then plated on the external carbon walls and the top surface of the carbon coating during the charging process. The unfavorable deposition of lithium inside the PHCCSs is discussed from the viewpoint of lithium-ion transport and lithium nucleation. The application potential of PHCCSs and the data from these LMB studies are also discussed.

Accumulation of water at the interface of the cathode catalyst layer (CCL) and the diffusion media is a major cause of performance loss in H 2 /air fuel cells. Proper engineering of the interface by the use of advanced materials and preparation methods can effectively reduce the extent of this loss by improving the transport of water and gas across this interface. Herein, we present detailed modeling results of water and gas transport across this interface for in-house synthesized carbon material with multiple levels of porosity and by considering the interfacial properties of the carbon material and the microporous layer (MPL). The oxygen reduction reaction and the counter-flow transport of oxygen and water within the CCL and MPL pores were modeled considering a partially flooded interface. Well-characterized multimodal porous carbon was chosen as a candidate material for this study, and the effects of all the various levels of porosity in the MPL, wettability, permeability, and the quality of contact between the MPL and CCL on the transport phenomena of fluids were investigated. This study provides new insights into the balance of opposing transport phenomena on the local and overall performance of the catalyst layer and rationalizes the design parameters for an MPL material based on both the material and interfacial properties.

In photocatalytic water splitting, fluidization is known to minimize the adverse effects of mass-transfer, poor radiation distribution, parasitic back-reactions and photocatalyst handling difficulties, which limit the scalability of immobilized-film and suspended slurry photocatalysts. Fluidization of one-dimensional TiO 2 photocatalyst particles, such as nanorods, -wires and -ribbons, is highly desired as it further enhances the efficiency of photocatalytic reaction, due to their peculiar photo-electrochemical characteristics that result in more effective separation of photo-generated charges and absorption of photons. However, the harsh physical environment of a fluidized bed reactor does not readily allow for nanostructured TiO 2 photocatalysts, as the fine features would be quickly removed from the particle surface. Here, we propose a scalable method for fabrication of rutile TiO 2 nanorods on porous glass beads as a 3D protective substrate to reduce the attrition rate caused by fluidization. The quality of the synthesized nanorod films was optimized through controlling a growth quality factor, R q , allowing for good quality films to be grown in different batch amounts and different hydrothermal reactor sizes. The utilization of porous glass beads substrate has reduced the attrition rate, and the protective features of the particles reduced the rate of attrition by an order of magnitude, compared to a particulate photocatalyst, to near negligible levels. Such considerably reduced attrition makes the as-developed porous glass beads supported rutile TiO 2 nanorods a viable fluidizable photocatalyst candidate for various applications, including water splitting and degradation of organic compounds., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Structured protocols offer a transparent and systematic way to elicit and combine/aggregate, probabilistic predictions from multiple experts. These judgements can be aggregated behaviourally or mathematically to derive a final group prediction. Mathematical rules (e.g., weighted linear combinations of judgments) provide an objective approach to aggregation. The quality of this aggregation can be defined in terms of accuracy, calibration and informativeness. These measures can be used to compare different aggregation approaches and help decide on which aggregation produces the "best" final prediction. When experts' performance can be scored on similar questions ahead of time, these scores can be translated into performance-based weights, and a performance-based weighted aggregation can then be used. When this is not possible though, several other aggregation methods, informed by measurable proxies for good performance, can be formulated and compared. Here, we develop a suite of aggregation methods, informed by previous experience and the available literature. We differentially weight our experts' estimates by measures of reasoning, engagement, openness to changing their mind, informativeness, prior knowledge, and extremity, asymmetry or granularity of estimates. Next, we investigate the relative performance of these aggregation methods using three datasets. The main goal of this research is to explore how measures of knowledge and behaviour of individuals can be leveraged to produce a better performing combined group judgment. Although the accuracy, calibration, and informativeness of the majority of methods are very similar, a couple of the aggregation methods consistently distinguish themselves as among the best or worst. Moreover, the majority of methods outperform the usual benchmarks provided by the simple average or the median of estimates., Competing Interests: The University of Melbourne provided consultancy fees to Cognimotive Consulting Inc. in which DRM has a financial interest. However this did not alter our adherence to PLOS ONE policies on sharing data and materials because it did not interfere with the full and objective presentation of results and methods." The University of Melbourne provided consultancy fees to DelphiCloud in which AL has a financial interest. However this did not alter our adherence to PLOS ONE policies on sharing data and materials because it did not interfere with the full and objective presentation of results and methods.

An innovative strategy is presented to engineer supported-Pt nanowire (NW) electrocatalysts with a high Pt content for the cathode of hydrogen fuel cells. This involves deposition of graphitic carbon nitride (g-CN) onto 3D multimodal porous carbon (MPC) (denoted as g-CN@MPC) and using the g-CN@MPC as an electrocatalyst support. The protective coating of g-CN on the MPC provides good stability for the electrocatalyst support against electrochemical oxidation, and also enhances oxygen adsorption and provides additional active sites for the oxygen reduction reaction. Compared with commercial carbon black Vulcan XC-72R (denoted as VC) support material, the larger hydrophobic surface area of the g-CN@MPC enables the supported high-content Pt NWs to disperse uniformly on the support. In addition, the unique 3D interconnected pore networks facilitate improved mass transport within the g-CN@MPC support material. As a result, the g-CN@MPC-supported high-content Pt catalysts show improved performance with respect to their counterparts, namely, MPC, VC, and g-CN@VC-supported Pt NW catalysts and the conventional Pt nanoparticle (NP) catalyst (i.e., Pt(20 wt%)NPs/VC (Johnson Matthey)) used as the benchmark. More importantly, the g-CN-tailored high-content Pt NW (≈60 wt%) electrocatalyst demonstrates high PEM fuel cell power/performance at a very low cathode catalyst loading (≈0.1 mg Pt  cm -2 )., (© 2021 Wiley-VCH GmbH.)

Adoption of proton exchange membrane (PEM) water electrolysis technology on a global level will demand a significant reduction of today's iridium loadings in the anode catalyst layers of PEM electrolyzers. However, new catalyst and electrode designs with reduced Ir content have been suffering from limited stability caused by (electro)chemical degradation. This has remained a serious impediment to a wider commercialization of larger-scale PEM electrolysis technology. In this combined DFT computational and experimental study, we investigate a novel family of iridium-niobium mixed metal oxide thin-film catalysts for the oxygen evolution reaction (OER), some of which exhibit greatly enhanced stability, such as minimized voltage degradation and reduced Ir dissolution with respect to the industry benchmark IrO x catalyst. More specifically, we report an unusually durable IrNbO x electrocatalyst with improved catalytic performance compared to an IrO x benchmark catalyst prepared in-house and a commercial benchmark catalyst (Umicore Elyst Ir75 0480) at significantly reduced Ir catalyst cost. Catalyst stability was assessed by conventional and newly developed accelerated degradation tests, and the mechanistic origins were analyzed and are discussed. To achieve this, the IrNbO x mixed metal oxide catalyst and its water splitting kinetics were investigated by a host of techniques such as synchrotron-based NEXAFS analysis and XPS, electrochemistry, and ab initio DFT calculations as well as STEM-EDX cross-sectional analysis. These analyses highlight a number of important structural differences to other recently reported bimetallic OER catalysts in the literature. On the methodological side, we introduce, validate, and utilize a new, nondestructive XRF-based catalyst stability monitoring technique that will benefit future catalyst development. Furthermore, the present study identifies new specific catalysts and experimental strategies for stepwise reducing the Ir demand of PEM water electrolyzers on their long way toward adoption at a larger scale.

High temperature proton exchange membrane fuel cells (HT-PEMFCs) are one type of promising energy device with the advantages of fast reaction kinetics (high energy efficiency), high tolerance to fuel/air impurities, simple plate design, and better heat and water management. They have been expected to be the next generation of PEMFCs specifically for application in hydrogen-fueled automobile vehicles and combined heat and power (CHP) systems. However, their high-cost and low durability interposed by the insufficient performance of key materials such as electrocatalysts and membranes at high temperature operation are still the challenges hindering the technology's practical applications. To develop high performance HT-PEMFCs, worldwide researchers have been focusing on exploring new materials and the related technologies by developing novel synthesis methods and innovative assembly techniques, understanding degradation mechanisms, and creating mitigation strategies with special emphasis on catalysts for oxygen reduction reaction, proton exchange membranes and bipolar plates. In this paper, the state-of-the-art development of HT-PEMFC key materials, components and device assembly along with degradation mechanisms, mitigation strategies, and HT-PEMFC based CHP systems is comprehensively reviewed. In order to facilitate further research and development of HT-PEMFCs toward practical applications, the existing challenges are also discussed and several future research directions are proposed in this paper.

Three spectrophotometric methods have been developed and compared for the quantification of low concentrations (0.03-63 μM) of aqueous permanganate in neutral pH conditions. Although permanganate is a widely used oxidant in drinking water and wastewater treatment, no widely accepted method of quantification has been reported to date. While one method presented does not require the need for any reagent chemicals (direct spectrophotometric analysis), it yielded a relatively low molar absorption coefficient of 3340 M -1  cm -1 at 525 nm and a level of detection (LOD) and quantification (LOQ) of 0.45 and 1.51 μM, respectively. Some instability of permanganate species during direct quantification was found to occur over 60 min, with a total decrease of 0.002 (arbitrary units) of absorbance, equivalent to a decrease in concentration of 0.6 μM. Beyond 60 min, no further degradation was observed. Indirect spectrophotometric analyses using 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and sodium iodide (NaI) provided a significantly more sensitive method for permanganate quantification, yielding molar absorption coefficients of 140,030 and 61,130 M -1  cm -1 , respectively. The LOD and LOQ were determined to be 0.01 and 0.03 μM for the ABTS method and 0.02 and 0.08 μM for the NaI method, respectively. Although conservative and accurate limits of quantification for both the ABTS and NaI methods are presented, which should be sufficient of most practical applications, lower limits may be possible with further refinement of the methods., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Electrocoagulation is a burgeoning technology now being considered for niche water treatment applications. Although much research has been conducted to determine the efficacy of electrocoagulation to remove various contaminants, the more fundamental electrochemical aspects of the technology are often overlooked. This research provides insight into the fundamental relationship of water flow, electrochemical metal dissolution and current density distribution through computational fluid dynamic (CFD) models, mathematical models and in-situ current density distribution identification experiments. Theoretically, it was determined that current distributed along the electrode was inversely proportional to the water flowrate. The turbulent flow through the EC reactor was simulated with varying inter-electrode gaps and flowrates, while the average velocity segments across the electrode surface was calculated, corresponding to the same segments used to experimentally determine the current distribution. Through the CFD models and current distribution determining technique, it was observed that current density was distributed unevenly and followed the trend predicted by theory. Areas of lower current density were generally accompanied by higher velocity flow. More uniform current was yielded with larger inter-electrode gaps, due to the greater flow uniformity. While operating with a 1 mm gap, the current and water velocity varied across the electrode by Δ27.6 mA/cm 2 and Δ0.220 m/s, and was minimized to Δ3.6 mA/cm 2 and Δ0.062 m/s at a 10 mm gap. Although current uniformity was increased, the overall current density decreased significantly due to the greater ohmic resistance associated with the larger gap. The removal of natural organic matter was reduced as much as 79% when the inter-electrode gap was reduced from 10 to 1 mm., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The efficacy of electrocoagulation at a pilot-scale as an alternative drinking water treatment technology to conventional coagulation is explored. A novel reactor was integrated into a pilot plant at the surface water supply of a small, remote community. Using iron anodes, the effect of metal loading (ML), current density and inter-electrode gap on the reduction of natural organic matter (NOM) was studied. Dissolved organics were characterized by large fractions of low molecular weight (<750 Da) hydrophilic carbon structures with lower charge density. A greater reduction in UV254 was yielded compared to dissolved organic carbon, indicating better removal of larger molecular weight fractions of NOM. As ML dosages increased from 27.8 to 60.8 mg/L, specific ultraviolet absorbance decreased from 1.92 ± 0.14 to 1.60 ± 0.10 L/m•mg respectively, from an initial raw water value of 2.21 L/m•mg. No clear trend was observed for the effect of current density and inter-electrode gap for NOM, however ML was the primary variable dictating the process' effectiveness. Energy requirements were observed to vary greatly and were highly dependent on ML, current density and inter-electrode gap; variables that all effect the operating potential and resistance. In general, conditions that yielded the greatest reduction of NOM, a 1 mm gap and 4-cell configuration, had energy requirements between 0.480 and 0.602 kWh/m 3 of water treated.

Chemically-prepared MnO2 containing a highly crystalline ramsdellite phase was tested as a cathode material in aqueous Zn-salt (ZnSO4 and Zn(CF3SO3)2) based electrolytes for the first time. This aqueous MnO2/Zn cell has shown excellent performance and reversibility, retaining ≈65% of its initial capacity for more than 1000 cycles. The charge storage mechanism is complex and includes a ramsdellite/tetragonal spinel two-phase reaction.

Harmful algal blooms (HAB) release microtoxins that contaminate drinking water supplies and risk the health of millions annually. Crystalline ferrate(VI) is a powerful oxidant capable of removing algal microtoxins. We investigate in-situ electrochemically produced ferrate from common carbon steel as an on-demand alternative to crystalline ferrate for the removal of microcystin-LR (MC-LR) and compare the removal efficacy for both electrochemical (EC) and chemical dosing methodologies. We report that a very low dose of EC-ferrate in deionized water (0.5 mg FeO 4 2- L -1 ) oxidizes MC-LR (MC-LR 0 = 10 μg L -1 ) to below the guideline limit (1.0 μg L -1 ) within 10 minutes' contact time. With bicarbonate or natural organic matter (NOM), doses of 2.0-5.0 mg FeO 4 2- L -1 are required, with lower efficacy of EC-ferrate than crystalline ferrate due to loss of EC-ferrate by water oxidation. To evaluate the EC-ferrate process to concurrently oxidize micropollutants, coagulate NOM, and disinfect drinking water, we spiked NOM-containing real water with MC-LR and Escherichia coli, finding that EC-ferrate is effective at 10.0 mg FeO 4 2- L -1 under normal operation or 2.0 mg FeO 4 2- L -1 if the test water has initial pH optimized. We suggest in-situ EC-ferrate may be appropriate for sporadic HAB events in small water systems as a primary or back-up technology.

A proof-of-concept for the fabrication of genetically customizable biogenic materials for photovoltaic applications is presented. E. coli is first genetically engineered to heterologously express the carotenoid biosynthetic pathway from plants. This modification yields a strain that overproduces the photoactive pigment lycopene. The pigment-producing cells are then coated with TiO 2 nanoparticles via a tryptophan-mediated supramolecular interface, and subsequent incorporation of the resulting biogenic material (cells@TiO 2 ) as an anode in an I - /I 3 - -based dye-sensitized solar cell yields an excellent photovoltaic (PV) response. This work lays strong foundations for the development of bio-PV materials and next-generation organic optoelectronics that are green, inexpensive, and easy to manufacture., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This Review addresses the technical challenges, scientific basis, recent progress, and outlook with respect to the stability and degradation of catalysts for the oxygen evolution reaction (OER) operating at electrolyzer anodes in acidic environments with an emphasis on ion exchange membrane applications. First, the term "catalyst stability" is clarified, as well as current performance targets, major catalyst degradation mechanisms, and their mitigation strategies. Suitable in situ experimental methods are then evaluated to give insight into catalyst degradation and possible pathways to tune OER catalyst stability. Finally, the importance of identifying universal figures of merit for stability is highlighted, leading to a comprehensive accelerated lifetime test that could yield comparable performance data across different laboratories and catalyst types. The aim of this Review is to help disseminate and stress the important relationships between structure, composition, and stability of OER catalysts under different operating conditions., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

An innovative Pt-free counter electrode was developed through which an electrolyte solution could be circulated in dye-sensitized solar cells (DSCs) to facilitate mass transfer, resulting in greatly suppressed charge recombination and a considerably enhanced electron lifetime, and accordingly much higher power conversion efficiency than a DSC with a stationary electrolyte.

The microporous layer (MPL) is a key cathodic component in proton exchange membrane fuel cells owing to its beneficial influence on two-phase mass transfer. However, its performance is highly dependent on material properties such as morphology, porous structure, and electrical resistance. To improve water management and performance, electrochemically exfoliated graphene (EGN) microsheets are considered as an alternative to the conventional carbon black (CB) MPLs. The EGN-based MPLs decrease the kinetic overpotential and the Ohmic potential loss, whereas the addition of CB to form a composite EGN+CB MPL improves the mass-transport limiting current density drastically. This is reflected by increases of approximately 30 and 70 % in peak power densities at 100 % relative humidity (RH) compared with those for CB- and EGN-only MPLs, respectively. The composite EGN+CB MPL also retains the superior performance at a cathode RH of 20 %, whereas the CB MPL shows significant performance loss., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A novel nanowire-structured polypyrrole-cobalt composite, PPy-CTAB-Co, is successfully synthesized with a surfactant of cetyltrimethylammounium bromide (CTAB). As an electro-catalyst towards oxygen reduction reaction (ORR) in alkaline media, this PPy-CTAB-Co demonstrates a superior ORR performance when compared to that of granular PPy-Co catalyst and also a much better durability than the commercial 20 wt% Pt/C catalyst. Physiochemical characterization indicates that the enhanced ORR performance of the nanowire PPy-CTAB-Co can be attributed to the high quantity of Co-pyridinic-N groups as ORR active sites and its large specific surface area which allows to expose more active sites for facilitating oxygen reduction reaction. It is expected this PPy-CTAB-Co would be a good candidate for alkaline fuel cell cathode catalyst.

In this study, a simple and reproducible synthesis strategy was employed to fabricate TiO2 microspheres with hierarchical nanostructure. The microspheres are macroscopic in the bulk particle size (several hundreds to more than 1000 μm), but they are actually composed of P25 nanoparticles as the building units. Although it is simple in the assembly of P25 nanoparticles, the structure of the as-prepared TiO2 microspheres becomes unique because a hierarchical porosity composed of macropores, larger mesopores (ca. 12.4 nm), and smaller mesopores (ca. 2.3 nm) has been developed. The interconnected macropores and larger mesopores can be utilized as fast paths for mass transport. In addition, this hierarchical nanostructure may also contribute to some extent to the enhanced photocatalytic activity due to increased multilight reflection/scattering. Compared with the state-of-the-art photocatalyst, commercial Degussa P25 TiO2, the as-prepared TiO2 microsphere catalyst has demonstrated significant enhancement in photodriven conversion of CO2 into the end product CH4. Further enhancement in photodriven conversion of CO2 into CH4 can be easily achieved by the incorporation of metals such as Pt. The preliminary experiments with Pt loading reveal that there is still much potential for considerable improvement in TiO2 microsphere based photocatalysts. Most interestingly and significantly, the synthesis strategy is simple and large quantity of TiO2 microspheres (i.e., several hundred grams) can be easily prepared at one time in the lab, which makes large-scale industrial synthesis of TiO2 microspheres feasible and less expensive.

With the aid of TEM characterization, we describe two distinct Pt nanostructures generated via the electroless reduction of Pt(NH3)4(NO2)2 within Nafion. Under one set of conditions, we produce bundles of Pt nanorods that are 2 nm in diameter and 10-20 nm long. These bundled Pt nanorods, uniformly distributed within 5 μm of the Nafion surface, are strikingly similar to the proposed hydrated nanomorphology of Nafion, and therefore strongly suggestive of Nafion templating. By altering the reaction environment (pH, reductant strength, and Nafion hydration), we can also generate nonregular polyhedron Pt nanoparticles that range in size from a few nanometers in diameter up to 20 nm. These Pt nanoparticles form a dense Pt layer within 100-200 nm from the Nafion surface and show a power-law dependence of particle size and distribution on the distance from the Nafion membrane surface. Control over the distribution and the type of Pt nanostructures in the surface region may provide a cost-effective, simple, and scaleable pathway for enhancing manufacturability, activity, stability, and utilization efficiency of Pt catalysts for electrochemical devices.

The industrial anthraquinone auto-oxidation process produces most of the world's supply of hydrogen peroxide. For applications that require small amounts of H2 O2 or have economically difficult transportation means, an alternate, on-site H2 O2 production method is needed. Advanced drinking water purification technologies use neutral-pH H2 O2 in combination with UV treatment to reach the desired water purity targets. To produce neutral H2 O2 on-site and on-demand for drinking water purification, the electroreduction of oxygen at the cathode of a proton exchange membrane (PEM) fuel cell operated in either electrolysis (power consuming) or fuel cell (power generating) mode could be a possible solution. The work presented here focuses on the H2 /O2 fuel cell mode to produce H2 O2 . The fuel cell reactor is operated with a continuous flow of carrier water through the cathode to remove the product H2 O2 . The impact of the cobalt-carbon composite cathode catalyst loading, Teflon content in the cathode gas diffusion layer, and cathode carrier water flowrate on the production of H2 O2 are examined. H2 O2 production rates of up to 200 μmol h(-1)  cmgeometric (-2) are achieved using a continuous flow of carrier water operating at 30 % current efficiency. Operation times of more than 24 h have shown consistent H2 O2 and power production, with no degradation of the cobalt catalyst., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This review concerns the efficient conversion of sunlight into chemical fuels through the photoelectrochemical splitting of water, which has the potential to generate sustainable hydrogen fuel. In this review, we discuss various photoelectrode materials and relative design strategies with their associated fabrication for solar water splitting. Factors affecting photoelectrochemical performance of these materials and designs are also described. The most recent progress in the research and development of new materials as well as their corresponding photoelectrodes is also summarized in this review. Finally, the research strategies and future directions for water splitting are discussed with recommendations to facilitate the further exploration of new photoelectrode materials and their associated technologies.

In this paper, Nb-doped TiO(2) with anatase and rutile phases was synthesized by the acid-catalyzed sol-gel method, and used as catalyst supports for the oxygen reduction reaction (ORR). X-ray diffraction (XRD), transmission electron microscopy (TEM), Energy dispersive X-ray spectroscopy (EDX), and Brunauer-Emmett-Teller (BET) were used to characterize the support materials in terms of material structures, morphology, composition, and surface area. XRD analysis showed that both the high concentration of hydrochloric acid present in the synthesis and the presence of Pt in the support could favor the formation of conductive rutile phased TiO(2), resulting in the improvement of electronic conduction of the Nb-doped TiO(2) support, which was confirmed by measured conductivities. For electrochemical characterization and ORR catalyst activity validation, Pt particles were deposited on the supports synthesized in this paper to form several catalysts, which were tested for electrochemical Pt surface area, ORR mass activity and specific activity. A monotonic increase in Pt ORR mass activity with increasing catalyst support's conductivity suggested that the support conductivity plays an important role in enhancing catalyst mass activity. The results showed that these non-carbon supported catalysts are promising as PEM fuel cell cathode catalysts.