Search

Distributed beamforming is a key enabler to provide power wirelessly to a massive amount of energy-neutral devices (ENDs). However, without prior information and fully depleted ENDs, initially powering these devices efficiently is an open question. This work investigates and assesses the feasibility of harvesting sufficient energy to transmit a backscatter pilot signal from the END, which can be then used for coherent downlink transmission. We experimentally evaluated adaptive single-tone and multi-tone signals during initial charging. The results indicate that the response time for ENDs with unknown locations can extend to several tens of seconds. Notably, the adaptive single-tone excitation shows, among others, better performance at lower transmit power levels, providing a faster response. These findings underscore the potential of adaptive single-tone signals in optimizing power delivery to END in future networks., Comment: 1st International Workshop on Energy Neutral and Sustainable IoT Devices and Infrastructure (EN-IoT 2024)

Extremely large-scale antenna array (ELAA) systems emerge as a promising technology in beyond 5G and 6G wireless networks to support the deployment of distributed architectures. This paper explores the use of ELAAs to enable joint localization, synchronization and mapping in sub-6 GHz uplink channels, capitalizing on the near-field effects of phase-coherent distributed arrays. We focus on a scenario where a single-antenna user equipment (UE) communicates with a network of access points (APs) distributed in an indoor environment, considering both specular reflections from walls and scattering from objects. The UE is assumed to be unsynchronized to the network, while the APs can be time- and phase-synchronized to each other. We formulate the problem of joint estimation of location, clock offset and phase offset of the UE, and the locations of scattering points (SPs) (i.e., mapping). Through comprehensive Fisher information analysis, we assess the impact of bandwidth, AP array size, wall reflections, SPs and phase synchronization on localization accuracy. Furthermore, we derive the maximum-likelihood (ML) estimator, which optimally combines the information collected by all the distributed arrays. To overcome its intractable high dimensionality, we propose a novel three-step algorithm that first estimates phase offset leveraging carrier phase information of line-of-sight (LoS) paths, then determines the UE location and clock offset via LoS paths and wall reflections, and finally locates SPs using a null-space transformation technique. Simulation results demonstrate the effectiveness of our approach in distributed architectures supported by radio stripes (RSs) -- an innovative alternative for implementing ELAAs -- while revealing the benefits of carrier phase exploitation and showcasing the interplay between delay and angular information under different bandwidth regimes.

Indoor positioning applications are craving for ever higher precision and accuracy across the entire coverage zone. Optimal anchor placement and the deployment of multiple distributed anchor nodes could have a major impact in this regard. This paper examines the influences of these two difficult to approach hypotheses by means of a straightforward ultrasonic 3D indoor positioning system deployed in a real-life scenario via a geometric based simulation framework. To obtain an optimal anchor placement, a particle swarm optimization (PSO) algorithm is introduced and consequently performed for setups ranging from 4 to 10 anchors. In this way, besides the optimal anchor placement layout, the influence of deploying several distributed anchor nodes is investigated. In order to theoretically compare the optimization progress, a system model and Cram\'er-Rao lower bound (CRLB) are established and the results are quantified based on the simulation data. With limited anchors, the placement is crucial to obtain a high precision high reliability (HPHR) indoor positioning system (IPS), while the addition of anchors, to a lesser extent, gives a supplementary improvement.

Multipath-based simultaneous localization and mapping (MP-SLAM) is a well established approach to obtain position information of transmitters and receivers as well as information regarding the propagation environments in future multiple input multiple output (MIMO) communication systems. Conventional methods for MP-SLAM consider specular reflections of the radio signals occurring at smooth, flat surfaces, which are modeled by virtual anchors (VAs) that are mirror images of the physical anchors (PAs), with each VA generating a single multipath component (MPC). However, non-ideal reflective surfaces (such as walls covered by shelves or cupboards) cause dispersion effects that violate the VA model and lead to multiple MPCs that are associated to a single VA. In this paper, we introduce a Bayesian particle-based sum-product algorithm (SPA) for MP-SLAM in MIMO communications systems. Our method considers non-ideal reflective surfaces by jointly estimating the parameters of individual dispersion models for each detected surface in delay and angle domain leveraging multiple-measurement-to-feature data association. We demonstrate that the proposed SLAM method can robustly and jointly estimate the positions and dispersion extents of ideal and non-ideal reflective surfaces using numerical simulation., Comment: 8 pages, 4 figures

The emergence of sixth-generation (6G) networks has spurred the development of novel testbeds, including sub-THz networks, cell-free systems, and 6G simulators. To maximize the benefits of these systems, it is crucial to make the generated data publicly available and easily reusable by others. Although data sharing has become a common practice, a lack of standardization hinders data accessibility and interoperability. In this study, we propose the Dataset Storage Standard (DSS) to address these challenges by facilitating data exchange and enabling convenient processing script creation in a testbed-agnostic manner. DSS supports both experimental and simulated data, allowing researchers to employ the same processing scripts and tools across different datasets. Unlike existing standardization efforts such as SigMF and NI RF Data Recording API, DSS provides a broader scope by accommodating a common definition file for testbeds and is not limited to RF data storage. The dataset format utilizes a hierarchical structure, with a tensor representation for specific experiment scenarios. In summary, DSS offers a comprehensive and flexible framework for enhancing the FAIR principles (Findability, Accessibility, Interoperability, and Reusability) in 6G testbeds, promoting open and efficient data sharing in the research community.

This paper deals with propagation and channel modeling for physically large arrays. The focus lies on acquiring a spatially consistent model, which is essential, especially for positioning and sensing applications. Ultra-wideband, synthetic array measurement data have been acquired with large positioning devices to support this research. We present a modified multipath channel model that accounts for a varying visibility of multipath components along a large array. Based on a geometric model of the measurement environment, we analyze the visibility of specular components. We show that, depending on the size of the reflecting surface, geometric visibility and amplitude estimates obtained with a super-resolution channel estimation algorithm show a strong correspondence. Furthermore, we highlight the capabilities of the developed synthetic array measurement system., Comment: 6 pages, 6 figures, submitted to EuCNC-2023

Geometric environment information aids future distributed radio infrastructures in providing services, such as ultra-reliable communication, positioning, and wireless power transfer (WPT). An a priori known environment model cannot always be assumed in practice. This paper investigates the capabilities of detecting specularly reflecting surfaces in a bistatic multiple-input multiple-output (MIMO) radar setup operating at sub-10 GHz frequencies. While rough surfaces generate diffuse reflections originating from their actual position, flat surfaces act like "mirrors," causing directive reflections that virtually originate "behind" them. Despite these propagation characteristics, we can estimate the locations of flat metal walls from reflections at their surface using synthetic aperture (SA) measurements. The performance gain achievable by exploiting this environment information is analyzed by evaluating WPT capabilities in a geometry-based beamforming setup. We show that it is possible to predict channel state information (CSI) with a geometric channel model. Our geometry-based beamformer suffers an efficiency loss of only 1.1dB compared with a reciprocity-based beamformer given perfect CSI.

Multiple concepts for future generations of wireless communication standards utilize coherent processing of signals from many distributed antennas. Names for these concepts include distributed MIMO, cell-free massive MIMO, XL-MIMO, and large intelligent surfaces. They aim to improve communication reliability, capacity, as well as energy efficiency and provide possibilities for new applications through joint communication and sensing. One such recently proposed solution is the concept of RadioWeaves. It proposes a new radio infrastructure for distributed MIMO with distributed internal processing, storage, and compute resources integrated into the infrastructure. The large bandwidths available in the higher bands have inspired much work regarding sensing in the mmWave- and sub-THz-bands, however, sub-6 GHz cellular bands will still be the main provider of broad cellular coverage due to the more favorable propagation conditions. In this paper, we present results from a sub-6 GHz measurement campaign targeting the non-stationary spatial channel statistics for a large RadioWeave and the temporal non-stationarity in a dynamic scenario with RadioWeaves. From the results, we also predict the possibility of multi-static sensing and positioning of users in the environment., Comment: 6 pages, 2 columns, 12 figures, IEEE European Conference on Networks and Communications & 6G Summit 2023

Multipath-based simultaneous localization and mapping (SLAM) is a promising approach to obtain position information of transmitters and receivers as well as information regarding the propagation environments in future mobile communication systems. Usually, specular reflections of the radio signals occurring at flat surfaces are modeled by virtual anchors (VAs) that are mirror images of the physical anchors (PAs). In existing methods for multipath-based SLAM, each VA is assumed to generate only a single measurement. However, due to imperfections of the measurement equipment such as non-calibrated antennas or model mismatch due to roughness of the reflective surfaces, there are potentially multiple multipath components (MPCs) that are associated to one single VA. In this paper, we introduce a Bayesian particle-based sum-product algorithm (SPA) for multipath-based SLAM that can cope with multiple-measurements being associated to a single VA. Furthermore, we introduce a novel statistical measurement model that is strongly related to the radio signal. It introduces additional dispersion parameters into the likelihood function to capture additional MPCs-related measurements. We demonstrate that the proposed SLAM method can robustly fuse multiple measurements per VA based on numerical simulations.

Massive antenna arrays form physically large apertures with a beam-focusing capability, leading to outstanding wireless power transfer (WPT) efficiency paired with low radiation levels outside the focusing region. However, leveraging these features requires accurate knowledge of the multipath propagation channel and overcoming the (Rayleigh) fading channel present in typical application scenarios. For that, reciprocity-based beamforming is an optimal solution that estimates the actual channel gains from pilot transmissions on the uplink. But this solution is unsuitable for passive backscatter nodes that are not capable of sending any pilots in the initial access phase. Using measured channel data from an extremely large-scale MIMO (XL-MIMO) testbed, we compare geometry-based planar wavefront and spherical wavefront beamformers with a reciprocity-based beamformer, to address this initial access problem. We also show that we can predict specular multipath components (SMCs) based only on geometric environment information. We demonstrate that a transmit power of 1W is sufficient to transfer more than 1mW of power to a device located at a distance of 12.3m when using a (40x25) array at 3.8GHz. The geometry-based beamformer exploiting predicted SMCs suffers a loss of only 2dB compared with perfect channel state information.

Radio stripes (RSs) is an emerging technology in beyond 5G and 6G wireless networks to support the deployment of cell-free architectures. In this paper, we investigate the potential use of RSs to enable joint positioning and synchronization in the uplink channel at sub-6 GHz bands. The considered scenario consists of a single-antenna user equipment (UE) that communicates with a network of multiple-antenna RSs distributed over a wide area. The UE is assumed to be unsynchronized to the RSs network, while individual RSs are time- and phase-synchronized. We formulate the problem of joint estimation of position, clock offset, and phase offset of the UE and derive the corresponding maximum-likelihood (ML) estimator, both with and without exploiting carrier phase information. To gain fundamental insights into the achievable performance, we also conduct a Fisher information analysis and inspect the theoretical lower bounds numerically. Simulation results demonstrate that promising positioning and synchronization performance can be obtained in cell-free architectures supported by RSs, revealing at the same time the benefits of carrier phase exploitation through phase-synchronized RSs.

Radio frequency (RF) wireless power transfer (WPT) is a promising technology for 6G use cases. It enables a massive, yet sustainable deployment of batteryless energy neutral (EN) devices at unprecedented scale. Recent research on 6G is exploring high operating frequencies up to the THz spectrum, where antenna arrays with large apertures are capable of forming narrow, "laser-like" beams. At sub-10 GHz frequencies, physically large antenna arrays are considered that are operating in the array near field. Transmitting spherical wavefronts, power can be focused in a focal point rather than a beam, which allows for efficient and radiation-safe WPT. We formulate a multipath channel model comprising specular components and diffuse scattering to find the WPT power budget in a realistic indoor scenario. Specular components can be predicted by means of a geometric model. This is used to transmit power via multiple beams simultaneously, increasing the available power budget and expanding the initial access distance. We show that exploiting this "beam diversity" reduces the required fading margin for the initial access to EN devices., Comment: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

This paper deals with multipath-based positioning and tracking in off-body channels. An analysis of the effects introduced by the human body and the implications on positioning and tracking is presented based on channel measurements obtained in an indoor scenario. It shows the influence of the radio signal bandwidth on the human body induced field of view (FOV) and the number of multipath components (MPCs) detected and estimated by a deterministic maximum likelihood (ML) algorithm. A multipath-based positioning and tracking algorithm is proposed that associates these estimated MPC parameters with floor plan features and exploits a human body-dependent FOV function. The proposed algorithm is able to provide accurate position estimates even for an off-body radio channel in a multipath-prone environment with the signal bandwidth found to be a limiting factor., Comment: 5 pages, 4 figures. Submitted to IEEE EuCAP-22

In this paper we investigate the possibility of modeling a single antenna alone and in close proximity to a physical object by means of discrete point source scatterers. The scatter point model allows joint modeling of a physical antenna and the human body as a single extended object with direction dependent scattering coefficients for the scatter points. We introduce the term extended antenna describing antenna and human body together. To investigate the identifiability of the model parameters we make use of ultrawideband channel measurements and accurate ground truth position and orientation measurements obtained with an optical tracking system. By comparing measurements of the antenna attached directly to the user with measurements for the antenna without the user nearby, we show the shadowing and scattering effects of the human body and the antenna., Comment: 5 pages, 6 figures. To be published in Proc. IEEE EuCAP-21