Search

With a suitable milling system, it is achievable to produce wholegrain flours that match the granulation and technological properties of refined flours while maintaining a complete nutritional profile. This process also minimizes the generation of additional industrial waste. This study aimed to characterize wholemeal flours with a fine granulation size of less than 160 µm: wheat (MWF), rye (MRF), spelt (MSF), barley (MBF), buckwheat (MBWF), and sorghum (MSGF). For comparison, the plain wheat flour type 530 (T530) was analyzed. The flours were assessed in terms of their chemical compositions and alpha amylase activities (the Falling Number assay), pasting properties (amylograph and a Rapid Visco Analyser (RVA)), water absorption using a farinograph, and technological quality based on their water (WRC) and sodium carbonate solvent retention capacity (SRC) profiles. Among the micronized wholemeal flours, wheat flour (MWF) exhibited the highest nutritional value, greatest water absorption, and highest final gelatinization temperature, but had the lowest energy value, carbohydrate content, water SRC, and sodium carbonate SRC. Wholemeal rye flour (MRF) displayed the lowest nutrient content and the highest amylolytic activity, water absorption, and sodium carbonate SRC. The plain wheat flour type 530 (T530) had the lowest water absorption. Special buckwheat flour (MBWF) showed the highest energy value due to its elevated carbohydrate content, along with the lowest sugar and TDF contents, amylolytic activity, and pasting temperature. [ABSTRACT FROM AUTHOR]

The grinding technique evolved along with the development of mankind and today it has become a real industry. The need to diversify flour assortments has raised the performance of the milling industry and, more than that, the products obtained are of superior quality due to the new machines and techniques for conditioning and grinding. By conditioning we mean the treatment of wheat with water or water and heat. It can be said that, among the technological operations of preparing wheat for mills, conditioning is the one that most influences the technological process of mills, the degree of extraction, the content of mineral substances of the flour, the separation of the germs and implicitly the baking properties of the flour. The essential parameters taken into account in this stage are the moisture content and the degree of hardness of the wheat grain. When determining the degree of extraction, the hectoliter weight has the major impact. Normally, an extraction of over 95% is sought when we talk about wholemeal flours. With the latest generation machines and their control with the help of new technology, 100% wholemeal wheat flours are obtained. The degree of extraction also influences the physico-chemical parameters of the flour and, of course, the ash content. Enzymatic activity of flour depends on the degree of extraction, and wholemeal flour is richer in enzymes than white flour. This difference is primarily due to the distribution of non-uniform enzymes in the wheat grain, starting from the core of the wheat grain to its periphery. Wholemeal flour contains significant amounts of bran and germs - the finer the bran, the darker the color of the flour - so it is important that the bran particles are larger and rarer for the flour obtained from the endosperm to express its characteristics in a meaningful way in the finished product. [ABSTRACT FROM AUTHOR]

Native Millet (Panicum decompositum) is a native grass species that was used as a staple food by many Australian Aboriginal communities. In this study, the potential for using Native Millet (NM) as a novel flour in the modern food market was investigated. Intact grain and white and wholemeal flours from two populations of NM were compared to bread wheat cv. Spitfire (SW) using a range of physical and chemical tests. The baking properties of NM flour were assessed using basic flatbreads made with 25:75 and 50:50 (NM:SW) mixes of wholemeal flour with 100% SW wholemeal flour used as the control. The grain size of NM was found to be smaller than SW. Milling yield, defined as the proportion of flour obtained from a whole seed, for NM was 4–10% lower than SW under the same moisture conditions used for tempering (drying) wheat. The properties of wholemeal flour indicated that NM flour has lower viscosity and low flour pasting ability compared to SW. This is likely due to the low starch content and high fibre content of NM seed. Wholemeal flour derived from NM had a protein content of 13.6% compared to 12.1% for SW. Based on a sensory analysis using an untrained panel, the distinct colour and texture may negatively affect the acceptance of NM flour by the consumer, but taste and aroma was not found to differ among samples. There were strong indications that the novelty of NM flour may help outweigh any limitations to consumer acceptance, making it a valuable product in future food markets. [ABSTRACT FROM AUTHOR]

Background and Objectives: Gevrek is grissini/breadstick like snack product. In this study, whole flours of modern wheat (Esperia), ancient wheats (einkorn, emmer, and spelt) and pseudocereal (amaranth, buckwheat, and quinoa) were used in gevrek formulation instead of refined wheat flour, and the effects on the physical, nutritional, and functional properties of gevreks were researched. Findings: The use of pseudocereals in the gevrek formulation decreased the lightness and yellowness value compared to the control and ancient wheat gevreks. Also, pseudocereals especially buckwheat decreased the hardness of gevreks significantly (p <.05). The phytic acid content of Esperia and buckwheat gevrek were 50.98% and 51.21% less than amaranth gevreks, respectively. The use of buckwheat and emmer contributed greatly to the increase in total phenolic content as well as antioxidant activity. Amaranth gevrek was superior in terms of Ca, Fe, and Mg content among all gevrek samples. Esperia and emmer gevreks were the most liked by the panelists when all parameters were taken into account. Conclusions: The use of ancient wheats and pseudocereals in the gevrek formulation yielded products with improved protein, antioxidant activity and phenolic content, acceptable technological quality and distinctive sensory properties. Significance and Novelty: Compared to traditional gevrek, our findings were the first to show that it is possible to produce nutritionally superior ancient wheat and pseudocereal‐enriched functional snacks (gevrek). [ABSTRACT FROM AUTHOR]

Durum wheat varieties are important sources of nutrients and provide remarkable amounts of phytochemicals. Especially, phenolics, which are mostly located in external layers of grains, have recently gained increased interest due to their high antioxidant power. This study aimed to evaluate the differences in the quality traits and phenolic compounds' concentration (e.g., phenolic acids) of different durum wheat genotypes, namely four Italian durum wheat cultivars and a USA elite variety, in relation to their yield potential and year of release. Phenolic acids were extracted both from wholemeal flour and semolina and analysed through HPLC-DAD analysis. Ferulic acid was the most represented phenolic acid, both in the wholemeal flour (438.3 µg g−1 dry matter) and in semolina (57.6 µg g−1 dry matter) across all cultivars, followed by p-coumaric acid, sinapic acid, vanillin, vanillic acid, syringic acid, and p-hydroxybenzoic acid. Among the cultivars, Cappelli showed the highest phenolic acid content, whilst Kronos had the lowest one. Negative correlations occurred between some phenolic acids and morphological and yield-related traits, especially for Nadif and Sfinge varieties. On the contrary, durum wheat genotypes with low yield potential such as Cappelli accumulated higher concentrations of phenolic acids under the same growing conditions, thereby significantly contributing to the health-promoting purposes. [ABSTRACT FROM AUTHOR]

Bakery products are high content in starch, sugar, and calories, but low content in fiber. They can be used for enrichment Fruit powder can serve as a valuable source for fortifying sponge cake products with fiber, natural antioxidants, and minerals. This scientific research was conducted to provide an opportunity to use Bulgarian fruit (nectarine) in the form of flour and to enrich confectionery products. Nectarine flour is prepared by drying the fruit in a dryer and then grinding. The fruit flour was mixed with 3 types of whole grain flour – oat, einkorn, and wheat. As a control, take a flour mixture of wheat flour and nectarine powder. A proportion was chosen based on previous research on flour mixtures with whole wheat flour and nectarine powder, in a ratio of 70:30, which were then incorporated into the composition of the sponge cakes. It was observed that the new products with whole grain flour and nectarine showed good physical properties, higher antioxidant activity, enriched with fiber, and reduced energy value compared to the control sample. These incorporated flour mixtures in the composition of sponge cakes are in optimal amounts and can be used as an enrichment in them. [ABSTRACT FROM AUTHOR]

IntroductionDuring the 20th century, the worldwide genetic diversity of wheat was sharply eroded by continual selection for high yields and industry demands for particular standardized qualities. A collection of Israeli and Palestinian landraces (IPLR) was established to represent genetic diversity, accumulated for ten millennia under diverse environments, which was mostly lost in this transition. As our long-term goal is to study this pre- Green Revolution genetic reservoir, herein we focus on its flour and bread quality and sensorial attributes.MethodsInitially, a database was built for the entire IPLR collection (n=901) holding both Triticum durum (durum wheat) and T. aestivum (bread wheat) which included genetic and phenotypic characterization of agronomic traits, grain and flour quality. Then, a representative subset of the IPLR was selected and compared to modern varieties for dough quality, rheology, aroma and taste using both whole and refined flours and breads. The sensory panel used 40 subjects who evaluated common protocol or sourdough breads made by four artisan bakers.ResultsResults show modern durum cultivar C-9 had superior rheological properties (gluten index, elasticity, dough development time) as compared with landraces, while bread landrace 'Diar Alla' was markedly preferable for baking in relation to the modern cultivar Gadish. Baking tests and subsequent sensory evaluation clearly demonstrated a preference toward refined breads, apart from whole breads prepared using sourdough starters. In bread wheat, loaves baked using landrace flour were scored higher in several quality parameters, whereas in durum lines, the opposite trend was evident. Loaves baked from landraces 'Diar Alla' and to a lesser extent 'Hittia Soada' presented a markedly different aroma from the control loaves prepared from modern flours, both in terms of overall compositions and individual compounds, including classes such as pyranones, pyrazines, furans and pyrroles (maltol). Modern lines, on the other hand, were consistently richer in terpenes and phenylpropanoids. Further analysis demonstrated a significant association between specific aroma classes and sensory attributes scored by panelists.DiscussionThe findings of the study may help advance new niches in the local wheat market aimed at health and nutrition including adapting durum varieties to the bread market and developing flavor-enhanced wholemeal breads.

With a suitable milling system, it is achievable to produce wholegrain flours that match the granulation and technological properties of refined flours while maintaining a complete nutritional profile. This process also minimizes the generation of additional industrial waste. This study aimed to characterize wholemeal flours with a fine granulation size of less than 160 µm: wheat (MWF), rye (MRF), spelt (MSF), barley (MBF), buckwheat (MBWF), and sorghum (MSGF). For comparison, the plain wheat flour type 530 (T530) was analyzed. The flours were assessed in terms of their chemical compositions and alpha amylase activities (the Falling Number assay), pasting properties (amylograph and a Rapid Visco Analyser (RVA)), water absorption using a farinograph, and technological quality based on their water (WRC) and sodium carbonate solvent retention capacity (SRC) profiles. Among the micronized wholemeal flours, wheat flour (MWF) exhibited the highest nutritional value, greatest water absorption, and highest final gelatinization temperature, but had the lowest energy value, carbohydrate content, water SRC, and sodium carbonate SRC. Wholemeal rye flour (MRF) displayed the lowest nutrient content and the highest amylolytic activity, water absorption, and sodium carbonate SRC. The plain wheat flour type 530 (T530) had the lowest water absorption. Special buckwheat flour (MBWF) showed the highest energy value due to its elevated carbohydrate content, along with the lowest sugar and TDF contents, amylolytic activity, and pasting temperature.

Research was carried out to evaluate the indicators determining the baking, functional, and technological properties and to identify correlations between these parameters in wholemeal rye flour. Using different evaluation methods, the authors determined 18 parameters of baking and rheological properties in ten Russian varieties of winter rye. In addition, the characteristics of the swelling curve were measured using an Amylograph Brabender at 30°C, and the water extract viscosity (VWE) and the content of water-soluble pentosans and protein were evaluated. A high correlation was found between maximum swelling after incubation at 30°C for 30 min, with the falling number (r = 0.85), amylogram peak viscosity (r = 0.90) and VWE (r = 0.94), and between VWE and gelatinization temperature (r = 0.72) and the falling number (r = 0.82). The most significant indicators for inclusion in breeding programs for baking and fodder varieties of winter rye are falling number, water extract viscosity, swelling rate, protein content, water-soluble pentosan content, water-absorption capacity, dough stability, and farinograph quality number. In the early stages of selection, only four characteristics can be limited for the evaluation of wholemeal flours: the falling number, swelling rate, water extract viscosity, and the farinograph quality number. The principal component analysis also demonstrated that there are reliable differences between the rye varieties under study in terms of the set of traits that characterize their raw material value. [ABSTRACT FROM AUTHOR]

Sweet potato flour is a key ingredient for the production of new food products worldwide, which imparts desired properties, nutritional value, antioxidants, and natural color to processed foods. However, little information regarding the functional properties of the sweet potato flour is available. In this study, the genetic diversity in the physiochemical, nutritional, and antioxidant properties of wholemeal flour from seven sweet potato varieties was investigated. The total phenolic content (TPC) of the free and bound fractions ranged from 13.85 to 90.74 mg gallic acid equivalent (GAE)/100 g and from 5.07 to 24.29 mg GAE/100 g, respectively. The average protein content of sweet potato was 5.41 g/100 g ranging from 3.40 to 8.60 g/100 g DW. The total amino acid content averaged 45.13 mg/g DW. The average contents of 12 mineral elements were in the order of K > P > Ca > Mg > Mn > Fe > Zn > Cu > Ni > Se > Cr > Cd. K and P contents were the highest among all accessions, which were positively correlated with most of the other minerals. The average starch content of sweet potato was 53.90 g/100 g DW, ranging from 31.68 to 64.90%. The peak viscosity (PV), hot paste viscosity (HPV), and cold paste viscosity (CPV) were in the range of 90.7–318.8 Rapid Visco Unit (RVU), 77.3–208.3 RVU, and 102.6–272.7 RVU, respectively. The hardness values and cohesiveness (Coh) varied among different sweet potatoes, with a range of 8.20–18.48 g and 0.22–0.68, respectively. The gelatinization onset, peak, conclusion temperatures, and enthalpy were in the ranges of 59.39–71.91°C, 70.19–88.40°C, 78.98–95.79°C, 1.85–5.65 J/g, respectively.

Durum wheat varieties are important sources of nutrients and provide remarkable amounts of phytochemicals. Especially, phenolics, which are mostly located in external layers of grains, have recently gained increased interest due to their high antioxidant power. This study aimed to evaluate the differences in the quality traits and phenolic compounds’ concentration (e.g., phenolic acids) of different durum wheat genotypes, namely four Italian durum wheat cultivars and a USA elite variety, in relation to their yield potential and year of release. Phenolic acids were extracted both from wholemeal flour and semolina and analysed through HPLC-DAD analysis. Ferulic acid was the most represented phenolic acid, both in the wholemeal flour (438.3 µg g−1 dry matter) and in semolina (57.6 µg g−1 dry matter) across all cultivars, followed by p-coumaric acid, sinapic acid, vanillin, vanillic acid, syringic acid, and p-hydroxybenzoic acid. Among the cultivars, Cappelli showed the highest phenolic acid content, whilst Kronos had the lowest one. Negative correlations occurred between some phenolic acids and morphological and yield-related traits, especially for Nadif and Sfinge varieties. On the contrary, durum wheat genotypes with low yield potential such as Cappelli accumulated higher concentrations of phenolic acids under the same growing conditions, thereby significantly contributing to the health-promoting purposes.

The article shows the benefits of consuming wholemeal products. However, the level of consumption of these products is low. The reason is primarily the low quality of products: the rough structure of the crumb, rapid hardening. Therefore, there is a need to improve the quality of bread from wholemeal flour. The indicators of quality of wholemeal flour produced by national enterprises are investigated in the work. Analysis of packaging and labeling of test samples of wholemeal flour (according to the manufacturer) showed that some of them are produced in accordance with GSTU 46.004-99 (“Wheat flour. Specifications”), and the quality of other samples is controlled by the manufacturer's own specifications. It should be noted that there are no Ukraine's standards for wholemeal wheat flour. Standard GSTU 46.004-99 (“Wheat flour. Technical conditions”) apply only to wheat graded and dark flour. It was found that the ash content of the studied samples of whole-meal flour (WMF) from wheat and spellta grain is in the range of 0.80–1.46%; paricle size: the residue on the sieve No. 067 – within 0.1–1.7%, the passage of the sieve No. 38 – within 12–34%. The influence of particle size and gluten of wheat and spelta whole-meal flour on its baking properties has been studied. It has been found increasing the volume and porosity of the bread while the particle size decreases. The largest bread volume (400–460 cm3) and porosity (67–68%) had the samples of flour with the smallest particle size (sieve residue No. 067 not more than 1 %, sieve passage No. 38 more than 15–20 %). For samples with a larger particle size (sieve passage No.38 – not more than 15-20 %), the volume of bread and its porosity decreased by 1.2–1.3 and 1.1–1.2 times, respectively. Analysis of gluten quantity and quality effect showed that a rather high quality of wholemeal bread from wheat WMF can be obtained with a crude gluten content in flour of at least 24–26% with a gluten quality of Gluten deformation index (GDI) in a range of 60–80 units. For the production of bread from spelta WMF it is recommended to use WMF with a crude gluten content of at least 30% with a gluten quality GDI in a range of 60–100 units.

With the increase in demand for healthy and safe food, the interest in the wild ancestors of wheat and the demand for einkorn wheat have increased in the last few decades. In Turkey, einkorn wheat is commonly consumed as bulgur. However, due to the higher protein, minerals particularly Zn and Fe, and phenolic compounds it contains, einkorn wheat flour has started to be added to wheat flour at different rates. Aim in this study is to determine the suitability of einkorn wheat for bread making. Einkorn refined flour addition enables lighter and brighter bread production, while the increasing amount of whole wheat flour has brought together darker bread. Due to the higher amount of bran, it contains, whole wheat flour has led to a significant reduction in bread volume value. The ZS, modified Zeleny sedimentation, SDSS and modified sodium dodecyl Sulphate sedimentation values which directly affect the bread structure showed significant decreases as the amount of einkorn flour and wholemeal flour increased. Einkorn can be mixed with bread wheat flour and whole wheat flour in certain proportions and used in the production of bread suitable for consumer demands. Although it causes a certain decrease in bread structure; einkorn has enough potential to be used in making both wheat bread and whole wheat bread. [ABSTRACT FROM AUTHOR]

The article shows the benefits of consuming wholemeal products. However, the level of consumption of these products is low. The reason is primarily the low quality of products: the rough structure of the crumb, rapid hardening. Therefore, there is a need to improve the quality of bread from wholemeal flour. The indicators of quality of wholemeal flour produced by national enterprises are investigated in the work. Analysis of packaging and labeling of test samples of wholemeal flour (according to the manufacturer) showed that some of them are produced in accordance with GSTU 46.004-99 ("Wheat flour. Specifications"), and the quality of other samples is controlled by the manufacturer's own specifications. It should be noted that there are no Ukraine's standards for wholemeal wheat flour. Standard GSTU 46.004-99 ("Wheat flour. Technical conditions") apply only to wheat graded and dark flour. It was found that the ash content of the studied samples of whole-meal flour (WMF) from wheat and spellta grain is in the range of 0.80– 1.46%; paricle size: the residue on the sieve No. 067 – within 0.1–1.7%, the passage of the sieve No. 38 – within 12–34%. The influence of particle size and gluten of wheat and spelta whole-meal flour on its baking properties has been studied. It has been found increasing the volume and porosity of the bread while the particle size decreases. The largest bread volume (400–460 cm³ ) and porosity (67–68%) had the samples of flour with the smallest particle size (sieve residue No. 067 not more than 1 %, sieve passage No. 38 more than 15–20 %). For samples with a larger particle size (sieve passage No.38 – not more than 15–20 %), the volume of bread and its porosity decreased by 1.2–1.3 and 1.1–1.2 times, respectively. Analysis of gluten quantity and quality effect showed that a rather high quality of wholemeal bread from wheat WMF can be obtained with a crude gluten content in flour of at least 24–26% with a gluten quality of Gluten deformation index (GDI) in a range of 60– 80 units. For the production of bread from spelta WMF it is recommended to use WMF with a crude gluten content of at least 30% with a gluten quality GDI in a range of 60–100 units. [ABSTRACT FROM AUTHOR]

The micronization process by jet mill of whole wheat flour in addition to xylanase application may be used to improve dough properties and baking quality. This study aimed to evaluate the dough formation and bakery performance of whole wheat flour micronized using jet mill and having different particle sizes and xylanase content A decrease in particle size increased water absorption and increased dough stability by 3.7 units. Increase in xylanase content decreased the dough stability and mixture tolerance, resulting in reduced strength. Although the dough quality reduced, this was not evident in bread quality. In bread, the increase in xylanase content increased the specific volume and improved the texture profile. The 158 and 261 μm particle sizes with 60 and 100 mg kg−1 xylanase content reduced the undesirable effects of fibers in the dough, which may lead to improved bread making, thus enhancing improved consumer acceptance. [ABSTRACT FROM AUTHOR]

Wholemeal flours from various cereals and pseudocereals are a valuable source of nutritionally important fiber components, especially beta-glucans and arabinoxylans, as well as bioactive substances accompanying dietary fiber. Most types of whole-wheat flours have unfavorable baking and sensory properties. The finest granulation of bran particles in the flour has a significant effect on reducing or eliminating these deficiencies. Special disintegration equipment is required to achieve fine granulation of the bran particles. In this study, we have tested a special type of impact mill (originally intended for grinding of plastics) to produce special finely ground wholemeal flours with lower starch damage and higher farinographic absorption. Moisture content in the studied flours was significantly lower (7.4–9.8%) than is common in standard flour (13–14%). According to the results of flour analyses obtained from several cereal sources, it seems that especially in rye and wheat, this technology is suitable for both achieving fine granulation of bran particles and in terms of not very substantial damage of starch granules. [ABSTRACT FROM AUTHOR]

Abstract Sourdough fermentation is a traditional process that is used to improve bread quality. A spontaneous sourdough ecosystem consists of a mixture of flour and water that is fermented by endogenous lactic acid bacteria (LAB) and yeasts. The aim of this study was to identify bacterial diversity during backslopping of spontaneous sourdoughs prepared from wheat, spelt, or rye wholemeal flour. Culture‐dependent analyses showed that the number of LAB (109 CFU/ml) was higher by three orders of magnitude than the number of yeasts (106 CFU/ml), irrespective of the flour type. These results were complemented by next‐generation sequencing of the 16S rDNA V3 and V4 variable regions. The dominant phylum in all sourdough samples was Firmicutes, which was represented exclusively by the Lactobacillales order. The two remaining and less abundant phyla were Proteobacteria and Bacteroidetes. The culture‐independent approach allowed us to detect changes in microbial ecology during the 72‐hr fermentation period. Weissella sp. was the most abundant genus after 24 hr of fermentation of the rye sourdough, but as the process progressed, its abundance decreased in favor of the Lactobacillus genus similarly as in wheat and spelt sourdoughs. The Lactobacillus genus was dominant in all sourdoughs after 72 hr, which was consistent with our results obtained using culture‐dependent analyses. This work was carried out to determine the microbial biodiversity of sourdoughs that are made from wheat, spelt, and rye wholemeal flour and can be used as a source of strains for specific starter cultures to produce functional bread.

Quinoa cultivation has gained increasing interest in Europe but more research on the characteristics of European varieties is required to help determine their end use applications. A comparative study was performed on 13 quinoa varieties cultivated under North-West European field conditions during three consecutive growing seasons (2017–2019). The seeds were milled to wholemeal flour (WMF) to evaluate the physicochemical properties. The WMFs of 2019 were characterized by the highest water absorption capacity (1.46–2.06 g/g), while the water absorption index (WAI) between 55 °C (2.04–3.80 g/g) and 85 °C (4.04–7.82 g/g) increased over the years. The WMFs of 2018 had the highest WAI at 95 °C (6.48–9.48 g/g). The pasting profiles were characterized by a high viscosity peak (1696–2560 mPa.s) and strong breakdown (−78–643 mPa.s) in 2017. The peak viscosity decreased in 2018 and 2019 (823–2492 mPa.s), while breakdown (−364–555 mPa.s) and setback (19–1037 mPa.s) increased. Jessie, Summer Red, Rouge Marie, Vikinga, and Zwarte WMFs were characterized by low WAIs and high shear resistance. Bastille WMF developed high viscosities and, along with Faro WMF, showed a high breakdown. The wide variation in physicochemical properties suggests that the potential food applications of WMFs depend on the variety and growing conditions.

Bread wheat (Triticum aestivum) is a major crop worldwide, and it is highly susceptible to heat. In this work, grain production and composition were evaluated in Portuguese T. aestivum germplasm (landraces and commercial varieties), which was subjected to heat after anthesis (grain filling stage). Heat increased the test weight (TW) in Nabão, Grécia and Restauração, indicating an improved flour-yield potential. Mocho de Espiga Branca (MEB) and Transmontano (T94) showed higher thousand-kernel weight (TKW). Gentil Rosso presented increased soluble sugars, which are yeast substrates in the bread-making process. Ardila stood out for its protein increase under heat. Overall SDS was unaffected by higher temperature, but increased in T94, indicating a better dough elasticity for bread-making purposes. Under heat, lipid content was maintained in most genotypes, being endogenous fatty acids (FAs) key players in fresh bread quality. Lipid unsaturation, evaluated through the double bond index (DBI), also remained unaffected in most genotypes, suggesting a lower flour susceptibility to lipoperoxidation. In Grécia, heat promoted a higher abundance of monounsaturated oleic (C18:1) and polyunsaturated linoleic (C18:2) acids, which are essential fatty acids in the human diet. This work highlighted a great variability in most parameters both under control conditions or in response to heat during grain filling. Cluster analysis of traits revealed a lower susceptibility to heat during grain filling in Ardila, Restauração, and Ruivo, in contrast to MEQ, which seems to be more differentially affected at this stage. Characterization and identification of more favorable features under adverse environments may be relevant for agronomic, industrial, or breeding purposes, in view of a better crop adaptation to changing climate and an improved crop sustainability in agricultural systems more prone to heat stress.

Wholemeal flours from various cereals and pseudocereals are a valuable source of nutritionally important fiber components, especially beta-glucans and arabinoxylans, as well as bioactive substances accompanying dietary fiber. Most types of whole-wheat flours have unfavorable baking and sensory properties. The finest granulation of bran particles in the flour has a significant effect on reducing or eliminating these deficiencies. Special disintegration equipment is required to achieve fine granulation of the bran particles. In this study, we have tested a special type of impact mill (originally intended for grinding of plastics) to produce special finely ground wholemeal flours with lower starch damage and higher farinographic absorption. Moisture content in the studied flours was significantly lower (7.4–9.8%) than is common in standard flour (13–14%). According to the results of flour analyses obtained from several cereal sources, it seems that especially in rye and wheat, this technology is suitable for both achieving fine granulation of bran particles and in terms of not very substantial damage of starch granules.

The article considers the end use of a new wheat variety with a high biological value, Chornobrova. It is shown that, for the nation’s health, it is important to increase the nutritional value of flour by increasing the content of the main nutrients (proteins) and essential micronutrients, in particular, by biofortification of plants. In the biofortification area, scientists all over the world are actively working on the so-called “coloured,” or pigmented, grain of barley, wheat, rice in order to increase its biological value and make it functional, health-improving food. Of the diversity of the new “colour-grained” varieties, the least studied is wheat, in particular, black (or black-grained) wheat. The purpose of the paper is to prove how practical it is to make whole grain wheat flour of high biological value from black wheat. In order to achieve this goal, the following tasks must be solved: determining the main technological and baking properties of black wheat of the Chornobrova variety and wholemeal flour made from it; studying the parameters of the test-baked bread from wholemeal flour with and without different additives. The study objects are wheat grain of the Chornobrova variety, wholemeal flour obtained from it, and model mixtures. The wheat grain was harvested in 2016, and stored for 12 months, with the following quality parameters: moisture content 12.6%; crude protein content 10.8%; crude ash content 1.53%; crude gluten content 23%; gluten quality group I, sedimentation 33 ml; grain unit weight 733 g/l; thousand-kernel weight 40 g; vitreousness 68%. The quality characteristics of the wholemeal flour obtained in a laboratory environment have been determined: the colour light brown, with dark speckles; the smell and taste typical of those of wheat flour; humidity 12.9%; crude gluten content 23.5%; gluten quality group I; gluten colour light brown; acidity 2.6°H; flour density: the residue on sieve 067–4%, and the undersize on sieve 38–60%. A series of experiments has allowed establishing that bakery products from Chornobrova are hardly worse than those made from traditional wheat flour: their humidity is by 2 % lower, acidity by 1.1°H higher, and porosity by 6.5% less than those of the control sample. The specific volume of the experimental sample is 14% less than that of the control, which is due to the low rheological properties of gluten of the Chornobrova variety. The only significant drawback of the bakery product is its specific colour – almost black. Adding a whitener in an amount of 0.015% to the recipe did not compensate for this fault, but adding an improving agent somewhat increased the porosity and specific volume of the bread. Thus, based on the research carried out, the article proves that it is only practical to produce wholemeal wheat flour, which is of high biological value. The basic technological and baking properties of wheat of the Chornobrova variety, and those of the wholemeal flour obtained from it in a laboratory environment have been determined. The test baking parameters of bread from wholemeal flour without and with the addition of various additives have been studied. It has been recommended to use it with the improving agent Top Bake Ban Bread (0.5%), or in a rye and wheat mixture, which will make it possible to improve not only the traditional colour of bread but also the properties of this product.

With a suitable milling system, it is achievable to produce wholegrain flours that match the granulation and technological properties of refined flours while maintaining a complete nutritional profile. This process also minimizes the generation of additional industrial waste. This study aimed to characterize wholemeal flours with a fine granulation size of less than 160 µm: wheat (MWF), rye (MRF), spelt (MSF), barley (MBF), buckwheat (MBWF), and sorghum (MSGF). For comparison, the plain wheat flour type 530 (T530) was analyzed. The flours were assessed in terms of their chemical compositions and alpha amylase activities (the Falling Number assay), pasting properties (amylograph and a Rapid Visco Analyser (RVA)), water absorption using a farinograph, and technological quality based on their water (WRC) and sodium carbonate solvent retention capacity (SRC) profiles. Among the micronized wholemeal flours, wheat flour (MWF) exhibited the highest nutritional value, greatest water absorption, and highest final gelatinization temperature, but had the lowest energy value, carbohydrate content, water SRC, and sodium carbonate SRC. Wholemeal rye flour (MRF) displayed the lowest nutrient content and the highest amylolytic activity, water absorption, and sodium carbonate SRC. The plain wheat flour type 530 (T530) had the lowest water absorption. Special buckwheat flour (MBWF) showed the highest energy value due to its elevated carbohydrate content, along with the lowest sugar and TDF contents, amylolytic activity, and pasting temperature.

The article considers the end use of a new wheat variety with a high biological value, Chornobrova. It is shown that, for the nation's health, it is important to increase the nutritional value of flour by increasing the content of the main nutrients (proteins) and essential micronutrients, in particular, by biofortification of plants. In the biofortification area, scientists all over the world are actively working on the so-called “coloured,” or pigmented, grain of barley, wheat, rice in order to increase its biological value and make it functional, health-improving food. Of the diversity of the new “colour-grained” varieties, the least studied is wheat, in particular, black (or black-grained) wheat. The purpose of the paper is to prove how practical it is to make whole grain wheat flour of high biological value from black wheat. In order to achieve this goal, the following tasks must be solved: determining the main technological and baking properties of black wheat of the Chornobrova variety and wholemeal flour made from it; studying the parameters of the test-baked bread from wholemeal flour with and without different additives. The study objects are wheat grain of the Chornobrova variety, wholemeal flour obtained from it, and model mixtures. The wheat grain was harvested in 2016, and stored for 12 months, with the following quality parameters: moisture content 12.6%; crude protein content 10.8%; crude ash content 1.53%; crude gluten content 23%; gluten quality group I, sedimentation 33 ml; grain unit weight 733 g/l; thousand-kernel weight 40 g; vitreousness 68%. The quality characteristics of the wholemeal flour obtained in a laboratory environment have been determined: the colour light brown, with dark speckles; the smell and taste typical of those of wheat flour; humidity 12.9%; crude gluten content 23.5%; gluten quality group I; gluten colour light brown; acidity 2.6°H; flour density: the residue on sieve 067-4%, and the undersize on sieve 38- 60%. A series of experiments has allowed establishing that bakery products from Chornobrova are hardly worse than those made from traditional wheat flour: their humidity is by 2 % lower, acidity by 1.1°H higher, and porosity by 6.5% less than those of the control sample. The specific volume of the experimental sample is 14% less than that of the control, which is due to the low rheological properties of gluten of the Chornobrova variety. The only significant drawback of the bakery product is its specific colour - almost black. Adding a whitener in an amount of 0.015% to the recipe did not compensate for this fault, but adding an improving agent somewhat increased the porosity and specific volume of the bread. Thus, based on the research carried out, the article proves that it is only practical to produce wholemeal wheat flour, which is of high biological value. The basic technological and baking properties of wheat of the Chornobrova variety, and those of the wholemeal flour obtained from it in a laboratory environment have been determined. The test baking parameters of bread from wholemeal flour without and with the addition of various additives have been studied. It has been recommended to use it with the improving agent Top Bake Ban Bread (0.5%), or in a rye and wheat mixture, which will make it possible to improve not only the traditional colour of bread but also the properties of this product. [ABSTRACT FROM AUTHOR]

This paper investigates the convenience of different chemical and rheological methods for determining the quality of two spelt cultivars for pasta making and the influence of egg quantity on whole meal pasta quality. Post-hoc Tukey’s HSD test at 95% confidence limit has been calculated to show significant differences between different samples. Score analysis is being useful tool for accessing the effect of eggs to spelt pasta quality, and this analysis proved that though lower scores (0.270) for rheological characteristics experienced with cultivar Eco, the addition of eggs is positively contributing to the spelt pasta quality yielding the best score for pasta (0.75), contrary to the cultivar Austria attributed with superior rheology scores. Whole meal spelt is characterised by lower Ca, but higher Fe and Mn content in comparison to bread wheat. In comparison with common pasta, spelt is a suitable raw material for a new product with improved functional properties at the market.[Projekat Ministarstva nauke Republike Srbije, br. TRI 46005 i br. TR 31055]

The aim of this study was to evaluate the baking value of rye flours from industrial mills and to indicate which rye flour quality parameters are the most important predictors of wholemeal rye bread quality for commercially milled rye grains. Ten wholemeal rye flours, which were characterized by ash content ranging from 1.43% to 2.42% d.m. (dry mass), were used for the study. The parameters that characterize the flour properties and the baking test were assessed. The study revealed that for the analyzed commercial rye flours, the falling number test and the amylograph properties are insufficient parameters for predicting the quality of wholemeal rye bread. The manufacture of good quality wholemeal bread requires the use of rye flour with superior quality, such as fine granulation, low protein content, low total and insoluble pentosans content, and, in particular, a high percentage of water-soluble pentosans content. Breads with a higher volume were obtained from rye flours that were generally characterized by lower protein content, lower total and insoluble pentosans content, and higher water-soluble pentosans content. Flour granulation and the percentage of water-soluble pentosans content especially, had a significant impact on bread’s hardness of crumb and the hardness of crumb’s increase during bread storage.

[Display omitted] • Cake made with refined flour and water had lower AA levels than other formulations. • The HMF levels in the cakes were up to 13 times lower by comparison to AA. • Replacing of milk by water reduces AA and HMF formation in cakes by 1.3 times. • The daily exposure of AA + HMF is 1.8 times higher when consuming wholemeal cake. In bakery products, beyond the heat treatment conditions, the type of flour and the combination with other ingredients in different ratios can increase or mitigate the formation of processing contaminants. In this study, a central composite design and a principal component analysis (PCA) were used to assess how the formulation affects the formation of acrylamide (AA) and hydroxymethylfurfural (HMF) in wholemeal and white cakes. The HMF levels (45–138 µg/kg) were up to 13 times lower than the AA (393–970 µg/kg) in cakes. The PCA showed that the proteins increased the AA formation during the dough baking, while the reducing sugar and the browning index were related to HMF formation in the cake crust. The total daily exposure of AA + HMF when consuming wholemeal cake is 1.8 times higher than white cake consumption, in which the values of margin of exposure (MOE), below < 10,000, demonstrated that AA showed a greater risk of exposure than HMF (MOE values > 10,000). Therefore, a good strategy to avoid high AA levels in cakes is to use of refined wheat flour and water in the formulation. In contrast, the advantage of wholemeal cake about their nutritional value should not be disregarded, thus, the use of water in its preparation and moderate consumption are strategies that could be adopted to reduce the risk of exposure to AA. [ABSTRACT FROM AUTHOR]

The use of selected plant water extracts to control pests and weeds is gaining growing attention in organic and sustainable agriculture, but the effects that such extracts may exert on the quality aspects of durum wheat are still unexplored. In 2014, 5 plant water extracts (Artemisia arborescens, Euphorbia characias, Rhus coriaria, Thymus vulgaris, Lantana camara) were prepared and distributed on durum wheat cv Valbelice to evaluate their potential herbicidal effects. After crop harvesting, the major physicochemical and technological parameters of wholemeal flours obtained from each treatment were measured and compared with those from chemical weeding and untreated controls. A baking test was also performed to evaluate the breadmaking quality. In wholemeal flours obtained after the treatment with plant extracts protein and dry gluten content were higher than in control and chemical weeding. Wholemeal flours obtained after chemical weeding reached the highest Mixograph parameters, and that from durum wheat treated with R. coriaria extract demonstrated a very high α-amylase activity. We concluded that the treatments with plant water extracts may influence many quality traits of durum wheat. This occurrence must be taken into account in overall decisions concerning the use of plant extracts in pest and weed management practice. [ABSTRACT FROM AUTHOR]

In this study the effect of semolina and wholemeal flour from six durum wheat cultivars on the pasta cooking and nutritional quality was evaluated. The wholemeal spaghetti samples showed an improvement in the chemical composition (high protein and insoluble dietary fibre content) but they have a decline in the cooking quality (high cooking loss) with respect to the semolina spaghetti. In particular, the wholemeal spaghetti Cappelli and Core samples recorded the highest protein and insoluble dietary fibre content, respectively. As compared to the other samples, the wholemeal spaghetti Iride recorded a higher cooking loss. Moreover, the wholemeal spaghetti showed the lowest overall quality due to the low score of elasticity, firmness and colour. Specifically, the wholemeal Cappelli recorded a slight rise of the overall quality with respect to other wholemeal samples. In conclusion, the wholemeal spaghetti Cappelli was found to be an optimum compromise between the sensory and nutritional quality. [ABSTRACT FROM AUTHOR]