Search

This work presents a case study in applying a systematic review framework (SYRINA) to the identification of chemicals as endocrine disruptors. The suitability and performance of the framework is tested with regard to the widely accepted World Health Organization definition of an endocrine disruptor (ED). The endocrine disrupting potential of triphenyl phosphate (TPP), a well-studied flame retardant reported to exhibit various endocrine related effects was assessed. We followed the 7 steps of the SYRINA framework, articulating the research objective via Populations, Exposures, Comparators, Outcomes (PECO) statements, performed literature search and screening, conducted study evaluation, performed data extraction and summarized and integrated the evidence. Overall, 66 studies, consisting of in vivo, in vitro and epidemiological data, were included. We concluded that triphenyl phosphate could be identified as an ED based on metabolic disruption and reproductive function. We found that the tools used in this case study and the optimizations performed on the framework were suitable to assess properties of EDs. A number of challenges and areas for methodological development in systematic appraisal of evidence relating to endocrine disrupting potential were identified; significant time and effort were needed for the analysis of in vitro mechanistic data in this case study, thus increasing the workload and time needed to perform the systematic review process. Further research and development of this framework with regards to grey literature (non-peer-reviewed literature) search, harmonization of study evaluation methods, more consistent evidence integration approaches and a pre-defined method to assess links between adverse effect and endocrine activity are recommended. It would also be advantageous to conduct more case studies for a chemical with less data than TPP.

This work presents a case study in applying a systematic review framework (SYRINA) to the identification of chemicals as endocrine disruptors. The suitability and performance of the framework is tested with regard to the widely accepted World Health Organization definition of an endocrine disruptor (ED). The endocrine disrupting potential of triphenyl phosphate (TPP), a well-studied flame retardant reported to exhibit various endocrine related effects was assessed. We followed the 7 steps of the SYRINA framework, articulating the research objective via Populations, Exposures, Comparators, Outcomes (PECO) statements, performed literature search and screening, conducted study evaluation, performed data extraction and summarized and integrated the evidence. Overall, 66 studies, consisting of in vivo, in vitro and epidemiological data, were included. We concluded that triphenyl phosphate could be identified as an ED based on metabolic disruption and reproductive function. We found that the tools used in this case study and the optimizations performed on the framework were suitable to assess properties of EDs. A number of challenges and areas for methodological development in systematic appraisal of evidence relating to endocrine disrupting potential were identified; significant time and effort were needed for the analysis of in vitro mechanistic data in this case study, thus increasing the workload and time needed to perform the systematic review process. Further research and development of this framework with regards to grey literature (non-peer-reviewed literature) search, harmonization of study evaluation methods, more consistent evidence integration approaches and a pre-defined method to assess links between adverse effect and endocrine activity are recommended. It would also be advantageous to conduct more case studies for a chemical with less data than TPP., This work presents a case study in applying a systematic review framework (SYRINA) to the identification of chemicals as endocrine disruptors. The suitability and performance of the framework is tested with regard to the widely accepted World Health Organization definition of an endocrine disruptor (ED). The endocrine disrupting potential of triphenyl phosphate (TPP), a well-studied flame retardant reported to exhibit various endocrine related effects was assessed. We followed the 7 steps of the SYRINA framework, articulating the research objective via Populations, Exposures, Comparators, Outcomes (PECO) statements, performed literature search and screening, conducted study evaluation, performed data extraction and summarized and integrated the evidence. Overall, 66 studies, consisting of in vivo, in vitro and epidemiological data, were included. We concluded that triphenyl phosphate could be identified as an ED based on metabolic disruption and reproductive function. We found that the tools used in this case study and the optimizations performed on the framework were suitable to assess properties of EDs. A number of challenges and areas for methodological development in systematic appraisal of evidence relating to endocrine disrupting potential were identified; significant time and effort were needed for the analysis of in vitro mechanistic data in this case study, thus increasing the workload and time needed to perform the systematic review process. Further research and development of this framework with regards to grey literature (non-peer-reviewed literature) search, harmonization of study evaluation methods, more consistent evidence integration approaches and a pre-defined method to assess links between adverse effect and endocrine activity are recommended. It would also be advantageous to conduct more case studies for a chemical with less data than TPP.

This work presents a case study in applying a systematic review framework (SYRINA) to the identification of chemicals as endocrine disruptors. The suitability and performance of the framework is tested with regard to the widely accepted World Health Organization definition of an endocrine disruptor (ED). The endocrine disrupting potential of triphenyl phosphate (TPP), a well-studied flame retardant reported to exhibit various endocrine related effects was assessed. We followed the 7 steps of the SYRINA framework, articulating the research objective via Populations, Exposures, Comparators, Outcomes (PECO) statements, performed literature search and screening, conducted study evaluation, performed data extraction and summarized and integrated the evidence. Overall, 66 studies, consisting of in vivo, in vitro and epidemiological data, were included. We concluded that triphenyl phosphate could be identified as an ED based on metabolic disruption and reproductive function. We found that the tools used in this case study and the optimizations performed on the framework were suitable to assess properties of EDs. A number of challenges and areas for methodological development in systematic appraisal of evidence relating to endocrine disrupting potential were identified; significant time and effort were needed for the analysis of in vitro mechanistic data in this case study, thus increasing the workload and time needed to perform the systematic review process. Further research and development of this framework with regards to grey literature (non-peer-reviewed literature) search, harmonization of study evaluation methods, more consistent evidence integration approaches and a pre-defined method to assess links between adverse effect and endocrine activity are recommended. It would also be advantageous to conduct more case studies for a chemical with less data than TPP.

Flame retardants are chemical substances that are intended to mitigate fire safety risks posed by a range of goods including furniture, electronics, and building insulation. There are growing concerns about their effectiveness in ensuring fire safety and the potential harms they pose to human health and the environment. In response to these concerns, on 13 June 2022, a roundtable of experts was convened by the UKRI Six Clean Air Strategic Priorities Fund programme 7. The meeting produced a Consensus Statement that summarises the issues around the use of flame retardants, laying out a series of policy recommendations that should lead to more effective fire safety measures and reduce the human and environmental health risks posed by these potentially toxic chemicals. [Abstract copyright: Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.]

Introduction: Evidence suggests that standards for resistance of furniture to ignition may lead to an increase in use of chemical flame retardants (CFRs). This is motivating the development of new approaches that maintain high levels of fire safety while facilitating a reduction in use of CFRs. However, reconciling potential fire risk with use of CFRs in relation to specific policy objectives is challenging. Objectives: To inform the development of a new policy in the UK for the fire safety of furniture, we developed for domestic furniture quantitative models of fire risk and potential for CFR exposure. We then combined the models to determine if any lower fire risk, higher CFR exposure categories of furniture were identifiable. Methods: We applied a novel mixed-methods approach to modelling furniture fire risk and CFR exposure in a data-poor environment, using literature-based concept mapping, qualitative research, and data visualisation methods to generate fire risk and CFR exposure models and derive furniture product rankings. Results: Our analysis suggests there exists a cluster of furniture types including baby and infant products and pillows that have comparable overall properties in terms of lower fire risk and higher potential for CFR exposure. Discussion: There are multiple obstacles to reconciling fire risk and CFR use in furniture. In particular, these include a lack of empirical data that would allow absolute fire risk and exposure levels to be quantified. Nonetheless, it seems that our modelling method can potentially yield meaningful product clusters, providing a basis for further research.

Context A significant number of guidance documents and reporting checklists have been published to support researchers in planning, doing, and writing up scientifically rigorous systematic reviews (SRs). However, compliance of researchers with SR guidance and reporting checklists remains a significant challenge, with the majority of published SRs lacking in one or more aspects of the rigour of methods and transparency of reporting. Objective To explore how bench protocol development platforms might be repurposed for improving compliance of SRs with conduct guidance and reporting checklists. System design We developed a proof-of-concept technology stack based around a general-purpose, guidance- and checklist-compliant SR protocol that was built in protocols.io. We used the protocols.io platform to create an integrated research planning and data collection process for planning guidance-compliant SRs. We used our own custom code and the mustache templating language to automatically create checklist-compliant first-draft SR protocol documents in Microsoft Word Discussion Creating the operational process for SR protocol planning and the technology stack for automated documentation allowed us to develop our theoretical understanding of how such a system may improve compliance with research conduct and reporting standards. This includes the potential value of algorithmic rather than heuristic approaches to conducting and reporting research studies, positioning of labelled data rather than a study manuscript as the primary product of the research process, and viewing the process of developing research standards as being analogous to the development of open software. Our study also allowed us to identify a number of technological issues that will need to be addressed to enable further development and testing of our proposed approach. These include limitations in templating language, especially when working in Microsoft Word, and the need for more data labelling and export fo

This protocol describes the design and development of a tool for evaluation of the internal validity of in vitro studies, which is needed to include the data as evidence in systematic reviews and chemical risk assessments. The tool will be designed specifically to be applied to cell culture studies, including, but not restricted to, studies meeting the new approach methodology (NAM) definition. The tool is called INVITES-IN (IN VITro Experimental Studies INternal validity). In this protocol, three of the four studies that will be performed to create the release version of INVITES-IN are described. In the first study, evaluation of existing assessment tools will be combined with focus group discussions to identify how characteristics of the design or conduct of an in vitro study can affect its internal validity. Bias domains and items considered to be of relevance for in vitro studies will be identified. In the second study, group agreement on internal validity domains and items of importance for in vitro studies will be identified via a modified Delphi methodology. In the third study, the draft version of the tool will be created, based on the data on relevance and importance of bias domains and items collected in Studies 1 and 2. A separate protocol will be prepared for the fourth study, which includes the user testing and validation of the tool, and collection of users’ experience.

Introduction: Evidence suggests that standards for resistance of furniture to ignition may lead to an increase in use of chemical flame retardants (CFRs). This is motivating the development of new approaches that maintain high levels of fire safety while facilitating a reduction in use of CFRs. However, reconciling potential fire risk with use of CFRs in relation to specific policy objectives is challenging. Objectives: To inform the development of a new policy in the UK for the fire safety of furniture, we developed for domestic furniture quantitative models of fire risk and potential for CFR exposure. We then combined the models to determine if any lower fire risk, higher CFR exposure categories of furniture were identifiable. Methods: We applied a novel mixed-methods approach to modelling furniture fire risk and CFR exposure in a data-poor environment, using literature-based concept mapping, qualitative research, and data visualisation methods to generate fire risk and CFR exposure models and derive furniture product rankings. Results: Our analysis suggests there exists a cluster of furniture types including baby and infant products and pillows that have comparable overall properties in terms of lower fire risk and higher potential for CFR exposure. Discussion: There are multiple obstacles to reconciling fire risk and CFR use in furniture. In particular, these include a lack of empirical data that would allow absolute fire risk and exposure levels to be quantified. Nonetheless, it seems that our modelling method can potentially yield meaningful product clusters, providing a basis for further research.