Search

The effect of germination degree (shoot length) on the content of nutritional and bioactive components, antioxidant activity was investigated in tartary buckwheat whole grain powder (TBWGP). The findings demonstrated that as germination degree increased, the absolute contents of total starch, protein and fat fractions as well as the ratio of straight-chain starch to total starch in TBWGP decreased, and the content of dietary fiber (IDF, SDF, TDF) elevated (P

Plant growth regulators (PGRs) are chemical substances that imitate the functions of phytohormones to enhance the crop yield and the harvest process. Phenylurea-derived plant growth regulators are known for their excellent efficacy in promoting fruit growth, particularly in kiwifruit, grapes, and melons. Phenylurea derivatives represent one class of the highly efficient and versatile PGRs. Specifically, forchlorfenuron (CPPU, N-(2-chloro-4-pyridinyl)-N′-phenylurea) exhibits similar growth-regulating efficacy to cytokinins and has a significant impact on the plant growth and the crop yield. As a result, there is growing interest in exploring the incorporation of various phenylurea moieties into agrochemicals to enhance their regulatory properties on crops. This review aims to provide a comprehensive overview on representative synthetic approaches for phenylurea derived PGRs. Additionally, we provide our perspective on the future development in this active research field.

The hot compression test of SP700 titanium alloy was performed using a Gleeble3800 thermal simulation test machine, and the thermal deformation behavior and microstructure evolution were examined in the temperature range of 800–880 °C, strain rate range of 1–10 s−1, and compression deformation of 30%–50%. The findings reveal that the peak flow stress of the SP700 titanium alloy decreases with increasing deformation temperature but increases with increasing strain rate. At a deformation temperature of 800 ℃, the flow stress curves demonstrate evident dynamic softening features with a rapid decrease in flow stress after the peak stress. By metallographic and scanning electron microstructure observations of the deformed microstructure, the α lamellar is gradually broken and spheroidized, and dynamic recrystallization occurs. With increasing deformation temperature, the induced phase transformation occurs, which leads to the dissolution of the α phase and an increase in the volume fraction of the β phase. The degree of recrystallization of the β phase increases with several β recrystallization grains at the grain boundaries, whereas the degree of globularization of the α lamellae decreases with increasing temperature. As the deformation temperature increases to 880 ℃, the flow stress curves exhibit steady flow. Recrystallization behavior preferentially occurs in the β grains, while the α lamellar remains flat without globularization behavior. That is, recrystallization of the β phase occurs under the test deformation conditions. For the α lamellae, when the deformation temperature is constant, the degree of spheroidization of the α lamellae increases with strain rate and compression deformation. During the hot deformation process, the α lamellae parallel to the compression axis kink, and the cumulative misorientation is discontinuous inside the α lamellae. At the discontinuous points, the new α/α interface boundary is produced, which causes the formation of unstable dihedral angles. To lower the surface tension energy, the β phase wedges into the α lamellae, which eventually results in the break of the α lamellae. For the α lamellae perpendicular to the compression axis, the interface fluctuates, resulting in continuous cumulative misorientation inside the α lamellae. When the rotation axis of the lamellae changes, a new α/α interface boundary is produced. At the interface fluctuation or the new α/α interface, the β phase easily wedges into the α lamellae by element diffusion, which finally causes fragmentation and spheroidization. Moreover, some of the α lamellae experience a shear deformation, leading to fragmentation under compression.

Superplastic tensile test was performed on a β-rich α+β titanium alloy (SP700 alloy) sheet in the temperature range of 740–800 °C and strain rate range of 1 × 10−4-1 × 10−2 s−1. The effects of the deformation parameters on the flow curves, strain rate sensitivity (m-value), thermal activation energy (Q-value) and microstructural characteristics were investigated to elucidate the deformation mechanism. The results showed that the examined SP700 alloy exhibited excellent superplasticity with fracture elongation up to approximately 1800% deformed at 760 °C and 1 × 10−3 s−1, with the maximum m-value of 0.55. The shapes of the flow curves were dependent on the strain rate and showed a type of curves without an obvious steady-state flow at relatively high strain rates. For this β-rich α+β titanium alloy, when deformed at 740–780 °C and medium strain rates (approximately 5 × 10−3-5 × 10−4 s−1), the controlling deformation mechanism was the grain boundary sliding accommodated by dislocation slip. When deformed at 800 °C and a strain rate of 1 × 10−4 s−1, m-value decreased to 0.1 and the main deformation mechanism was dislocation slip with a high β volume fraction over 50% and average grain size over 5 μm. Meanwhile, the dominant texture changed from to or because of the grain rotation caused by the grain boundary sliding.

To compare steamed bread quality of different modified bran whole wheat flour, wheat bran was modified by atmospheric steam, superheated steam, microwave, extrusion, enzymolysis hydrolysis (xylanase) and fermentation (yeast). The modified bran was backfilled into wheat flour to obtain whole wheat flour with different bran properties. The sensory quality, texture and aging properties of six kinds of whole wheat flour steamed bread with different bran properties were compared. At the same time, the quality of six kinds of modified bran backfilled whole wheat flour steamed bread was comprehensively analyzed by principal component analysis. The results showed that six kinds of modified bran could improve the quality of whole wheat steamed bread to a certain extent. The extruded and fermented modified bran deepened the apparent color of whole wheat steamed bread. The sensory comprehensive scores of modified whole wheat steamed bread were increased by 7.3~16.8 points compared with the control group, and the score of enzyme-digested whole wheat steamed bread was the highest. The elasticity and cohesiveness of modified whole wheat steamed bread core did not change significantly. The hardness of whole wheat steamed bread core was significantly reduced by fermentation and atmospheric steam bran, and the chewiness of whole wheat steamed bread core was significantly reduced by fermentation bran (P

A systematic study was conducted on the impact of annealing treatments on the microstructure and properties of cold-rolled Ti50Ni47Fe3 alloys using optical microscopy, scanning electron microscopy, electron backscattered diffraction, and an electronic universal testing machine. It was found that, during low-temperature annealing (400 °C and 500 °C), the annealing time had no significant effect on the microstructure or properties of the Ti50Ni47Fe3 alloy. Only elongation (δ) increased with the increase in the annealing time, and the grain orientation of the Ti50Ni47Fe3 alloy was //RD (rolling direction). When annealing at medium–high temperature (600 °C), as the annealing time increased, recrystallization and grain growth processes occurred, resulting in a continuous decrease in strength and an increase in δ. Meanwhile, it was found that the grain orientation of the cold-rolled Ti50Ni47Fe3 alloy changed from //RD during the recovery and recrystallization processes to //RD after the grain growth process. The orientation distribution function cross-section φ2 = 45° results indicate that the texture was mainly distributed along the γ orientation line (φ1 = 0~90°, Φ = 54.7°, φ2 = 45°). When annealed at 400 °C and 500 °C, the texture of the Ti50Ni47Fe3 alloys was (111)[uvw]. When the annealing treatment was 600 °C for 120 min, a (110)[uvw] texture occurred. Additionally, ductile fracture occurred in all specimens, and the crack origin was located on one side of the fracture surface, with obvious “Y”-shaped propagation. This article studied annealing treatments of cold-rolled Ti50Ni47Fe3 alloys, providing corresponding theoretical guidance for subsequent production applications.

In this paper, a CatBoost model for predicting superelastic strains of alloys was established by utilizing features construction and selection as well as model filtering and evaluation based on 125 existing data points of superelastic titanium alloys. The alloy compositions of a TiNbMoZrSnTa system were optimized and three nickel-free titanium alloys with potentially excellent superelastic properties were designed using the Bayesian optimization algorithm using a superelastic strain as the optimization target. The experimental results indicated that only Ti-12Nb-18Zr-2Sn and Ti-12Nb-16Zr-3Sn exhibited clear superelasticity due to the absence of relevant information about the alloys’ β stability in the machine learning model. Through experimental optimization of the heat treatment regimens, Ti-12Nb-18Zr-2Sn and Ti-12Nb-16Zr-3Sn ultimately achieved recovery strains of 4.65% after being heat treated at 853 K for 10 min and 3.01% after being heat treated at 1073 K for 30 min, respectively. The CatBoost model in this paper possessed a certain ability to design nickel-free superelastic titanium alloys but it was still necessary to combine it with existing knowledge of material theory for effective utilization.

The effect of annealing treatment on the microstructure and texture of a Ti50Ni47Fe3 shape memory alloy tube was studied. The results show that the recrystallization process of a cold-rolled Ti50Ni47Fe3 alloy tube occurs at 600 °C. The microstructure changes from long striped grains to equiaxed recrystallized grains. The main texture of the alloy tube is the fiber texture parallel to RD. With the increase in the annealing temperature, the crystal orientation of the alloy gradually turned to (111), and a series of secondary textures were distributed along the γ orientation line when the alloy was annealed at a lower temperature (450~600 °C). When the alloy was annealed at 650 °C, the growth of recrystallized grains made the grain orientation change, which led to the weakening of the γ-fiber texture and the formation of recrystallization textures.

The evolution of the microstructure and hardness changes in the Au-15Ag-12Cu-6Ni alloy during the processes of cold rolling and annealing were investigated and the heat treatment regimen for the alloy was optimized in this article. The hardness of the alloy continuously increases with the cold rolling reductions, leading to continuous deformation of the grains during the cold rolling process, ultimately resulting in smaller grain sizes. Subsequent annealing induces recovery and recrystallization, achieving complete recrystallization at 700 °C. An intriguing softening effect is observed after annealing at 700 °C, manifesting in a significant reduction in hardness to 238 (Hv0.5). The cold deformation texture of the alloy aligns with the recrystallization texture type, exhibiting only a certain degree of angular deviation. This is primarily characterized by //RD texture and a texture deviating 60° from RD towards TD. The performance of the finished sheet improves with the precipitation of ordered phases AuCu after a 300 °C heat treatment for 0.5 h, resulting in a remarkable hardness of 380 (Hv0.5).

A series of novel triazoloquinolinone and imidazoquinazolinone derivatives were designed and synthesised, and their biological activities against SHP2 protein and melanoma A357 cell line were evaluated in vitro. The results show that some target compounds have moderate to excellent inhibitory activity on SHP2 protein and melanoma A357 cell line. Structure-activity relationships (SARs) showed that both imidazoquinazolinone and triazoloquinazolinone derivatives have good SHP2 protein kinase and melanoma cell line A357 inhibitory activity. The results of molecular docking also showed that the cores of imidazoquinazolinone and triazoloquinazolinone have a certain affinity for SHP2 protein at the same time. Compared with SHP244, the target compounds have quite good liver microsomal stability and has more drug potential. The most promising compound B1 has a strong inhibitory effect on the melanoma cell line A357 at 100 µM (76.15% inhibition).

Heat treatments after cold rolling for TiNiFe shape-memory alloys have been compared. After EBSD analysis and as calculated by the Avrami model and Arrhenius equation, the relationship between the heat-treatment temperature and manufacturing time of TiNiFe alloys is established. Through calculation, it can be found that TiNiFe alloys can obtain similar microstructures under the annealing processes of 823 K for 776 min, 827 K for 37 min, and 923 K for 12.5 min. And the recrystallization fractions are all around 50%. Nevertheless, the tensile properties and recovery stress of the alloys show almost similar values. And based on the feasibility of the annealing process, it is believed that annealing at 873 K for 37 min is the optimal choice to obtain a recrystallization fraction φR = 50%.

The effect of annealing temperature on the microstructures and mechanical properties of Ti50Ni47Fe3 (at. %) shape memory alloy was investigated by using a cold-rolled alloy sheet. For this purpose, a scanning electron microscope, electron backscatter diffraction, a transmission electron microscope, X-ray diffraction, tensile tests and Vickers hardness tests were used. The evolution of the microstructures, mechanical properties and fracture morphology of Ti50Ni47Fe3 alloy was studied. The results show that the recovery occurs at an annealing temperature of 500 °C, and the recrystallization occurs at 600 °C. Because of the recrystallization at 600 °C, the //RD texture disappears, and the intensity of the //RD texture decreases; the alloy reaches its maximum elongation while maintaining a high strength, and at this annealing temperature, the alloy has excellent comprehensive mechanical properties. After the temperature exceeds 600 °C, the mechanical properties of the alloy decrease sharply. With the increase of the annealing temperature, the quantity and distribution of elliptical Ti2Ni-phase particles show almost no specific changes. Additionally, with the increase of annealing temperatures to 600 °C, the fracture surface of Ti50Ni47Fe3 alloys becomes flatter.

Pithecellobium clypearia Benth. (accepted name: Archidendron clypearia (Jack) I.C.Nielsen; Mimosaceae), a popular traditional Chinese medicine, has a significant anti-inflammatory effect. The crude water extract of the aerial part of P. clypearia has been clinically applied to treat upper respiratory tract infections, acute gastroenteritis, laryngitis, and pharyngitis. However, the therapeutic mechanism of ethanol fraction of water extract (ESW) of P. clypearia to treat psoriasis should be complemented. The aim of our research was to clarify the protective effects of ESW from P. clypearia against psoriasis-like skin inflammation induced by imiquimod (IMQ) in mice with efficacy indexes and target tissue (spleen and serum) metabolomics. The ingredient of ESW was analyzed by ultrahigh-performance liquid chromatography combined with tandem mass spectrometry (UHPLC-MS/MS) method. The imiquimod-induced psoriatic mouse model was employed to investigate the effect of ESW against psoriasis, where the treatment method was implemented for 6 days both topically (Gel at 5%) and orally (at 2.4 g/kg p.o.). Traditional pharmacodynamic indicators (phenotypic characteristics, psoriasis area and severity index (PASI) score, H&E staining, immunohistochemical staining, the thickness of epidermis, body weight change, and spleen index) were conducted to appraise the efficacy of ESW. Furthermore, a gas chromatography-mass spectrometer (GC-MS) coupled with multivariate analysis was integrated and applied to obtain serum and spleen metabolic profiles for clarifying metabolic regulatory mechanisms of ESW. The current study illustrated that ESW is composed mainly of gallic acid, ethyl gallate, quercitin, 7-O-galloyltricetiflavan, quercetin, and myricetin by UHPLC-MS/MS analysis. ESW could distinctly improve IMQ-induced psoriasis in mouse through reducing PASI score, alleviating tissue damage, restoring spleen index, and inhibiting proliferating cell nuclear antigen (PCNA) expression in psoriasis-like skin tissue. From the metabolomics study, 23 markers with significant changes are involved in eight main pathways in spleen and serum samples, including linoleic acid metabolism and glycine, serine, and threonine metabolism. The current study showed that ESW had obvious antipsoriasis effects on IMQ-induced psoriasis in mice, which might be attributed to regulating the dysfunction of differential biomarkers and related pathways. In summary, ESW of P. clypearia showed a favourable therapeutic effect on IMQ-induced psoriasis, and metabolomics provided insights into the mechanisms of ESW to the treatment of psoriasis.

Ti-6Al-4V profiles prepared by hot extrusion are usually accompanied by bending and twisting. The hot twist-stretch straightening is an effective strategy such that the bending deflection and twisting angle can be simultaneously decreased by a single straightening process. In addition, utilizing stress relaxation effect, the residual stress and springback can be greatly reduced by holding the straightening temperature and strain constant for a period after twist-stretch straightening. In this study, the hot deformation behaviors of the Ti-6Al-4V profile were revealed by experiments. The tensile model was obtained by uniaxial tensile tests within ranges of temperatures (500–700 °C) and strain rates (5 × 10−5–1 × 10−3 s−1). The creep constitutive model was acquired with stress relaxation experiments in ranges of temperatures (500–700 °C) and pre-strain of 1.5%. Then, the coupled thermo-mechanical model of hot twist-stretch straightening was established. Based on orthogonal experiment strategy, the effects of straightening temperature, stretch strain, and holding time on the bending deflection and torsion angle of profile were investigated systematically and the process was optimized. The straightening accuracy is significantly affected by straightening temperature and holding time. By using optimized process parameters in practical straightening experiments, the deflection/length and angle/length after straightening does not exceed 2‰ and 2.5‰°/mm, respectively, which is basically consistent with the numerical simulation result.

With desirable physical performances of impressive actuation strain, high energy density, high degree of electromechanical coupling and high mechanical compliance, dielectric elastomer actuators (DEAs) are widely employed to actuate the soft robots. However, there are many challenges to establish the dynamic models for DEAs, such as their inherent nonlinearity, complex electromechanical coupling, and time-dependent viscoelastic behavior. Moreover, most previous studies concentrated on the planar DEAs, but the studies on DEAs with some other functional shapes are insufficient. In this paper, by investigating a conical DEA with the material of polydimethylsiloxane and considering the influence of inertia, we propose a dynamic model based on the principles of nonequilibrium thermodynamics. This dynamic model can describe the complex motion characteristics of the conical DEA. Based on the experimental data, the differential evolution algorithm is employed to identify the undetermined parameters of the developed dynamic model. The result of the model validation demonstrates the effectiveness of the model.

The superplastic tensile test was carried out on SP700 (Ti-4.5Al-3V-2Mo-2Fe) titanium alloy sheet at 760 °C by the method of maximum m value, and the microstructure characteristics were investigated to understand the deformation mechanism. The results indicated that the examined alloy showed an extremely fine grain size of ~1.3 μm and an excellent superplasticity with fracture elongation of up to 3000%. The grain size and the volume fraction of the β phase increased as the strain increased, accompanied by the elements’ diffusion. The β-stabilizing elements (Mo, Fe, and V) were mainly dissolved within the β phase and diffused from α to β phase furthermore during deformation. The increase in strain leads to the accumulation of dislocations, which results in the increase in the proportion of low angle grain boundaries by 15%. As the deformation process, the crystal of α grains rotated, and the texture changed, accompanied by the accumulation of dislocations. The phase boundary (α/β) sliding accommodated by dislocation slip was the predominant mechanism for SP700 alloy during superplastic deformation.

Ti-3Al-2.5V alloy was usually the α phase of HCP structure at room temperature which had obvious anisotropy. During tube rolling, α grain would be influenced by stress-strain state, deformation amount, ‘Q’ ratio to result the preferred orientation and formed texture. In order to obtain radial texture tube by rolling and improve the service quality of tube in the pipeline system, Φ25 mm Ti-3Al-2.5V alloy tubes was selected as billet for the experiment, and four kinds of tubes with outer diameter of Φ16mm was produced by single pass cold rolling with ‘Q’ ratios ranging from 0.65 to 2.0. The effect of ‘Q’ ratio on the texture of Ti-3Al-2.5V tube was studied. The result indicted that the initial texture of the tube is radial-circumferential equally distributed, and the radial basal texture enhances gradually with increasing ‘Q’ ratio. Since the angle between the C-axis of grain and the radial axis of RD decreases, the C-axis of grain distributes to the radial direction, and the more grain orientation from {112X} pyramidal to {0001} basal plane. The different ‘Q’ ratio would lead to different strain along the radial direction, circumferential direction, axial direction, thus affected the crystal orientation and distribution during tube rolling deformation. When ‘Q’ > 1, the tube mainly produced radial basal texture. By comparison with ‘Q’ < 1, the tube mainly produced circumferential basal texture. As a result, when the initial texture of the tube is radial-circumferential equally distributed, the ideal radial texture of the tube can be obtained by choosing rolling process with ‘Q’ > 2.0.

The fracture-behaviors of two Ti-Al-Sn-Zr-Mo-Nb-W-Si alloys with different slow-diffusing β stabilizing elements (Mo, W) were investigated through in-situ tensile testing at 650 °C via scanning electron microscopy. These alloys have two phases: the α phase with hcp-structure (a = 0.295 nm, c = 0.468 nm) and the β phase with bcc-structure (a = 0.332 nm). Three-dimensional atom probe (3DAP) results show that Mo and W mainly dissolve in the β phase, and they tend to cluster near the α/β phase boundary. Adding more slow-diffusing β stabilizing elements can improve the ultimate tensile strength and elongation of the alloy at 650 °C. During tensile deformation at 650 °C, microvoids mainly initiate at α/β interfaces. With increases in the contents of Mo and W, the β phase content increases and the average phase size decreases, which together have excellent accommodative deformation capability and will inhibit the microvoids’ nucleation along the interface. In addition, the segregation of Mo and W near the α/β interface can reduce the diffusion coefficient of the interface and inhibit the growth of microvoids along the interface, which are both helpful to improve the ultimate tensile strength and plasticity.

Near alpha titanium alloys have been widely used in the aerospace industry owing to their high special strength, low-density and excellent corrosion resistance. Ti–3Al–2.5V is a typical near alpha titanium alloy that was usually used in the form of a tube in aircraft due to its excellent cold workability. In the present study, the microstructural evolution and detwinning behavior of cold-rolled Ti–3Al–2.5V alloy tubes during annealing were investigated. Upon annealing, the microstructure evolution strongly depends on the annealing temperature and holding time, which play important roles in the kinetics of the static recovery and recrystallization. In addition, there are two independent detwinning mechanisms involved during annealing. The first one is that detwinning occurs along the twin shear direction at grain boundaries, resulting in a shortening effect. The second one is that detwinning occurs in the center of twins, resulting in a thinning effect of twins. The understanding of the detwinning behavior and microstructural evolution during annealing helps with the tube processing and their applications in aircraft.

The direct C(sp³)--H functionalization reactions enable the development of green and streamlined synthetic routes for structurally complex molecules by circumventing the pre-activation of the substrates. Herein, we disclose an atom- and step-economic synthetic approach for rapid access to both α-(2- indolyl) ketones and α-(3-indolyl) ketones, which are privileged structures in bioactive molecules and organic synthesis, though generally prepared by bespoke multi-step strategies. The reaction proceeded via direct acylation of indole benzylic C(sp³)--H bond under the NHC and photocatalyst catalysis. The mild conditions, broad substrate scope, and predictable regioselectivity among multiple potential reactive sites enable efficient access to α-indolyl ketones from readily available 2- or 3-alkyl-substituted indoles. Furthermore, the competitive reaction at the 2- or 3-benzylic position of the 2,3-dialkyl-substituted indoles was systematically studied. Further transformation and bioactivity studies of the obtained α-(2- or 3-indolyl) ketones highlight the potential utility of this method. [ABSTRACT FROM AUTHOR]

In this study, tert-butyl 4-(5-bromopyridin-2-yloxy)piperidine-1-carboxylate was synthesized. The title compound was characterized using ¹H NMR, 13C NMR, MS, and FT-IR techniques, and its single crystal was evaluated using X-ray diffraction (XRD). The molecular structure was optimized using the density functional theory (DFT) at the B3LYP/6-311+G(2d, p) level. The optimized structure was also compared with the crystal structure determined using single-crystal (XRD), and the results were consistent. Molecular electrostatic potential (MEP) and frontier molecular orbital (FMOs) analyses of the title compound were preformed using computational methods. Infrared vibrational analysis of the target compound was also conducted. [ABSTRACT FROM AUTHOR]

In this study, tert-butyl 4-(5-bromopyridin-2-yloxy)piperidine-1-carboxylate was synthesized. The title compound was characterized using ¹H NMR, 13C NMR, MS, and FT-IR techniques, and its single crystal was evaluated using X-ray diffraction (XRD). The molecular structure was optimized using the density functional theory (DFT) at the B3LYP/6-311 + G(2d, p) level. The optimized structure was also compared with the crystal structure determined using single-crystal (XRD), and the results were consistent. Molecular electrostatic potential (MEP) and frontier molecular orbital (FMOs) analyses of the title compound were preformed using computational methods. Infrared vibrational analysis of the target compound was also conducted. [ABSTRACT FROM AUTHOR]