Search

Objective To explore a transfusion therapeutic plan for hemolytic disease of the newborn(HDN) caused by anti-c antibodies in mother of Asian-type DEL. Methods The ABO blood type and Rh phenotype of the mother and child were determined using the saline tube method. The mother′s RhD negativity was confirmed through classical anti-human globulin testing and RhD adsorption-elution test. The mother′s unexpected antibodies were screened and their titers were measured using classical anti-human globulin testing, antibody card test and polyamine method. Cross-matching was conducted. The three hemolysis tests were performed by antibody card test. The mother′s RHD gene typing was conducted using a commercially available RHD negative identification gene detection kit (PCR-SSP method). Results The mother exhibited a CCee Rh serological phenotype, and the DEL gene test confirmed the presence of RHD*1227A, indicating the production of anti-c antibodies. The infant displayed a DCcEe Rh serological phenotype, positive for direct antiglobulin test and red cell elution. Based on the mother′s obstetric history, clinical manifestations of the infant and blood examination results, the diagnosis was HDN caused by anti-c antibodies. Conclusion For infants with HDN caused by anti-c antibodies in mother of Asian-type DEL, DCCee Rh phenotype red blood cell transfusion is recommended, while CCee Rh phenotype deglycerolized red blood cell transfusion is recommended for the mother.

The roles and mechanisms of A-kinase anchoring protein 1 (AKAP1) in vascular smooth muscle cell (VSMC) phenotypic modulation and neointima formation are currently unknown. AKAP1 is a mitochondrial PKA-anchored protein and maintains mitochondrial homeostasis. This study aimed to investigate how AKAP1/PKA signaling plays a protective role in inhibiting VSMC phenotypic transformation and neointima formation by regulating mitochondrial fission. The results showed that both PDGF-BB treatment and balloon injury reduced the transcription, expression, and mitochondrial anchoring of AKAP1. In vitro, the overexpression of AKAP1 significantly inhibited PDGF-BB mediated VSMC proliferation and migration, whereas AKAP1 knockdown further aggravated VSMC phenotypic transformation. Additionally, in the balloon injury model in vivo, AKAP1 overexpression reduced neointima formation, the muscle fiber area ratio, and rat VSMC proliferation and migration. Furthermore, PDGF-BB and balloon injury inhibited Drp1 phosphorylation at Ser637 and promoted Drp1 activity and mitochondrial midzone fission; AKAP1 overexpression reversed these effects. AKAP1 overexpression also inhibited the distribution of mitochondria at the plasma membrane and the reduction of PKARIIβ expression induced by PDGF-BB, as evidenced by an increase in mitochondria-plasma membrane distance as well as PKARIIβ protein levels. Moreover, the PKA agonist promoted Drp1 phosphorylation (Ser637) and inhibited PDGF-BB-mediated mitochondrial fission, cell proliferation, and migration. The PKA antagonist reversed the increase in Drp1 phosphorylation (Ser637) and the decline in mitochondrial midzone fission and VSMC phenotypic transformation caused by AKAP1 overexpression. The results of this study reveal that AKAP1 protects VSMCs against phenotypic modulation by improving Drp1 phosphorylation at Ser637 through PKA and inhibiting mitochondrial fission, thereby preventing neointima formation.

Sound vibrations generate electrical signals called cochlear potentials, which can reflect cochlear stereocilia movement and outer hair cells (OHC) mechanical activity. However, because the cochlear structure is delicate and complex, it is difficult for existing measurement techniques to pinpoint the origin of potentials. This limitation in measurement capability makes it difficult to fully understand the contribution of stereocilia and transduction channels to cochlear potentials. In view of this, firstly, this article obtains the stereocilia movement generated by basilar membrane (BM) vibration based on the positional relationship between the various structures of the organ Corti. Secondly, Kirchhoff’s law is used to establish an electric field model of the cochlear cavity, and the stereocilia movement is embedded in the electric field by combining the gated spring model. Finally, a force-electric coupling mathematical model of the cochlea is established. The results indicated that the resistance variation between different cavities in the cochlea leads to a sharp tuning curve. As the displacement of the BM increased, the longitudinal potential along the cochlea continued to move toward the base. The decrease in stereocilia stiffness reduced the deflection angle, thereby reducing the transduction current and lymphatic potential.

Some experiments can’t be realized because the cochlea’s Corti is the most delicate and complex sensory organ. In this paper, some typical and special behavioral characteristics in the process of sensation were found in medical clinic. Based on the interdisciplinary principles of medicine, physics and biology, a real numerical simulation model of Corti is established. On the basis of verifying the correctness of the model, the mechanism corresponding to these typical and special behavior characteristics in the process of sensation is explored through simulation calculation and analysis. This study provides theoretical and applied basis for people to better understand the sound sensing mechanism, and provides a numerical simulation platform for further analyzing Corti’s sensing mechanism and good clinical application.

Image deblurring is a fundamental image processing task, and research for efficient image deblurring methods is still a great challenge. Most of the currently existing methods are focused on TV-based models and regularization term construction; little efforts are paid to model proposal and correlated algorithms for the fidelity term in fractional-order derivative space. In this paper, we propose a novel fractional-order variational model for image deblurring, which can efficiently address three different blur kernels. The objective functional contains a fractional-order gradient fidelity term and a total generalized variation (TGV) regularization term, and it highlights the ability to preserve details and eliminate the staircase effect. To solve the problem efficiently, we provide two numerical algorithms based on the Chambolle-Pock primal-dual method (PD) and the alternating direction method of multipliers (ADMM). A series of experiments show that the proposed method achieves a good balance between detail preservation and deblurring compared with several existing advanced models.

The purpose of this study is to obtain the peak of the gas explosion load which is affected by many factors and is not easy to determine. Explosion peak is a key factor in the time-load curve of the explosion field. In this paper, the static and dynamic modal analysis method of gas explosion fracture of reinforced concrete prefabricated slabs is used to obtain the static fracture, maximum reflective pressure applied and peak dynamic load of prefabricated plates. In the actual explosion study, all three prefabricated plates broke at one-third, and the peak dynamic load was 6.743 times the span buckling load in the plate. The analysis also shows that when plastic hinges appear at one-half, the above ratio is 3 times. The calculated peak is within the pressure range of the explosion test. The Baker model is used to fit the explosion time-load curve. This function is applied to the dynamic analysis of the finite element analysis of the explosion plate, and the failure of the plate is more consistent with the explosion case site. The median value of the explode field load time-load equation with the curve function can be applied to the rapid evaluation of post-explosion structure.

Image enhancement is one of the bases of image processing technology, which can enhance useful features and suppress useless information of images according to the specified task. In order to ensure coherent enhancement for images with oriented flow-like structures, we propose a nonlinear diffusion system model based on time-fractional delay. By combining the nonlinear isotropic diffusion equation with fractional time-delay regularization, we construct a structure tensor. Meanwhile, the introduction of source terms enhances the contrast of the image, making it effective for denoising images with high-level noise. Based on compactness principles, the existence of weak solutions for the model is proved by using the Galerkin method. In addition, various experimental results verify the enhancement ability of the proposed model.

In present investigation, a new load transfer model was proposed, in which the softening and strengthening of super-long pile skin friction was considered. The influence of parameters variation on the softening load transfer model was discussed in detail. The load transfer model proposed was verified by engineering results. The nonlinear iterative calculation method of the super-long piles was improved with considering the nonlinear compression model of concrete and the weight of the pile body. Comparing calculation results and the engineering measured data, it demonstrates that the relationship between pile skin friction and the relative displacement and the settlement results are generally in good agreement with the practical engineering results. The skin friction of super-long piles increases with the increase of the depth, while decreases with the increase of the depth near the end of the pile and it has an obvious downward trend. As the load continues to increase, the skin friction near the pile end increases significantly and shows a gradual expansion of the pattern. It completely reflects the softening and strengthening properties of pile skin friction.

Due to ethical issues and the nature of the ear, it is difficult to directly perform experimental measurements on living body elements of the human ear. Therefore, a numerical model has been developed to effectively assess the effect of the replacement of artificial ossicles on hearing in the inner ear. A healthy volunteer’s right ear was scanned to obtain CT data, which were digitalized through the use of a self-compiling program and coalescent Patran-Nastran software to establish a 3D numerical model of the whole ear, and a frequency response of a healthy human ear was analyzed. The vibration characteristics of the basilar membrane (BM) after total ossicular replacement prosthesis (TORP) implantation were then analyzed. The results show that although the sound conduction function of the middle ear was restored after replacement of the TORP, the sensory sound function of the inner ear was affected. In the low frequency and medium frequency range, hearing loss was 5.2~10.7%. Meanwhile, in the middle–high frequency range, the replacement of a middle ear TORP in response to high sound pressure produced a high acoustic stimulation effect in the inner ear, making the inner ear structures susceptible to fatigue and more prone to fatigue damage compared to the structures in healthy individuals. This developed model is able to assess the effects of surgical operation on the entire hearing system.

The theory of vertical pile vibration is the essential basis for pile integrity determination and dynamic analysis. The pile vibration characteristics are inevitably affected when the surrounding soil is frozen due to the low environmental temperature. Therefore, the investigation of pile vibration considering the surrounding soil as a saturated frozen porous medium is of great importance. In this paper, an analytical model for vertical pile vibration was established by employing the theory of composite saturated porous media, that is, by simplifying the upper frozen soil layer as a homogeneous isotropic saturated frozen porous medium and the foundation soil beneath the pile as an elastic half-space subjected to the motion of a rigid disk. By employing the integral transform and variable separation method, analytical solutions for the proposed model were derived under the three-dimensional axisymmetric condition. The analytical model and its solutions were verified by comparing them with the existing solutions for an end-bearing pile embedded in a homogeneously frozen soil layer as well as for a saturated half-space. A parametric study was conducted by utilizing the proposed solutions, and the results indicated that the pile bottom stiffness, the freezing temperature, the shear modulus of the unfrozen soil, etc., had a significant influence on the dynamic responses of the vertical pile vibration in both the frequency and the time domains.

Multiplicative noise removal from texture images poses a significant challenge. Different from the diffusion equation-based filter, we consider the telegraph diffusion equation-based model, which can effectively preserve fine structures and edges for texture images. The fractional-order derivative is imposed due to its textural detail enhancing capability. We also introduce the gray level indicator, which fully considers the gray level information of multiplicative noise images, so that the model can effectively remove high level noise and protect the details of the structure. The well-posedness of the proposed fractional-order telegraph diffusion model is presented by applying the Schauder’s fixed-point theorem. To solve the model, we develop an iterative algorithm based on the discrete Fourier transform in the frequency domain. We give various numerical results on despeckling natural and real SAR images. The experiments demonstrate that the proposed method can remove multiplicative noise and preserve texture well.

The mechanisms of angiotensin II (Ang II) on regulating adipogenic differentiation and function remain unknown. In this study, we focus on revealing the role of C-terminal-binding protein 1 (CtBP1) on Ang II-mediated adipogenic differentiation and mature adipocyte browning. Amounts of 3T3-L1 and CtBP1-KO 3T3-L1 were treated with Ang II for 24 h and then induced adipogenic differentiation, or cells were first induced differentiation and then treated with Ang II. The expressions of CtBP1 and adipogenic markers were checked by Western blot. Transcription of CtBP1 was assayed by Real-time RT-PCR. Lipid droplet formation and size were detected by Oil Red O. Mitochondrial content and reactive oxygenspecies (ROS) were detected by Mito-tracker and MitoSOX. Mitochondrial respiratory function was detected with the corresponding kits. Mitochondrial membrane potential (MMP) (∆Ψm) was assayed by JC-1. The results show that Ang II promoted CtBP1 transcription and expression via AT1 receptor during 3T3-L1 adipogenic differentiation. Ang II significantly inhibited lipid droplet formation and adipogenic markers expression in 3T3-L1 differentiation, which was blocked by CtBP1 knockout. In mature 3T3-L1, Ang II treatment increased uncoupling protein-1 (UCP-1) expression and the number of lipid droplets, and also reduced lipid droplet size and single cell lipid accumulation, which was reversed by CtBP1 knockout. In addition, Ang II treatment enhanced mitochondrial numbers, ATP production, oxygen consumption rate (OCR) and ROS generation, and reduced MMP (∆Ψm) via CtBP1 in mature 3T3-L1 adipocytes. In conclusion, this study demonstrates that CtBP1 plays a key role in the inhibitory effect of Ang II on adipogenesis. Moreover, Ang II regulates the function of mature adipocyte via CtBP1, including promoting adipocyte browning, mitochondrial respiration and ROS generation.

With growing demand for renewable wind energy, the number of offshore wind turbines increased rapidly in recent years. This paper uses the improved Tajimi model and transfer matrix method to analyze the dynamic response of pile group supported offshore wind turbine under wind and wave load. The vibration equation of the structure is established by tower discretization. The calculation result is compared with the numerical simulation result. The horizontal displacement of the structure under loads with different frequencies can be obtained. The wind speed and the foundation impedance are found important to the structure displacement. The pile–pile interaction factor depends on the pile spacing, the pile embedment ratio, and the incidence angle.

To verify that inclined tension legs can improve the stability of the tension leg platform, this paper established the dynamic equation of a tension leg platform (TLP) under marine environmental loads by using the modified Morrison equation considering the influence of ocean currents on wave forces. Additionally, the velocity and acceleration of random wave water particles were simulated via the JONSWAP spectrum. In addition, a three-dimensional model of a tension leg platform with inclined tension legs was established by AQWA, and its dynamic responses under variable survival conditions were compared and analyzed. The results showed that the surge and heave were more sensitive to the sea current, while the pitch was more sensitive to the wind. There is a significant difference in tendon tensions between the atypical TLP with inclined tension legs established in this study and the typical International Ship and Offshore Structures Committee (ISSC) TLP.

It may cause more novel physical effects that the combination with in-plane defects induced by grain boundaries (GBs) and quasi three-dimensional system induced by oxidation functional group. Different from those in blocks, these new physical effects play a significant role in the mechanical properties and transport behavior. Based on the configuration design, we investigate the in-plane and out-plane geometric deformation caused by the coupling of GBs and oxygen-containing functional groups and establish a mechanical model for the optimal design of the target spatial structure. The results show that the strain rate remarkably affect the tensile properties of polycrystalline graphene oxide (PGO). Under high oxygen content (R = 50%), with the increasing strain rate, the PGO is much closer to ductile fracture, and the ultimate strain and stress will correspondingly grow. The growth of temperature reduces the ultimate stress of PGO, but the ultimate strain remains constant. When the functional groups are distributed at the edge of the GBs, the overall strength decreases the most, followed by the distribution on the GBs. Meanwhile, the strength of PGO reaches the greatest value when the functional groups are distributed away from the GBs.

The organ of Corti (OC) in the cochlea is a significant structure for feeling sound. The components of OC and the interaction of the part with the surroundings contribute to the fact that the passive tuning of the cochlear macrostructure is unclear. Based on the interaction between the basilar membrane (BM), tectorial membrane (TM), reticular lamina (RL), and various parts of OC, a mechanical model of the cochlea is established to study the motion patterns of each part under the action of a certain pressure. The variational principle is applied to the calculation of the analytical expression of the displacement of the BM. The results of the analytical solution differ little from the experimental value, and the variation trend is consistent, which presents the correctness of the model. The parameter sensitivity analysis is carried out for obtaining the interaction principle and the primary and secondary roles of each component in the process of the sense of sound. The results show that the absence of the TM and the decrease in the stiffness of the outer hair cells (OHCs) and OHC bundles will shift vibratory response patterns to lower frequencies, in which the lack of TM will result in the greatest reduction of CF. The absence of RL exerts a negative influence on the CF as well as the amplitude of BM and thereby loss of hearing. Therefore, both TM and RL are essential structures during the process of the sense of sound. At the same time, the resonance frequency at the base of the BM is concentrated on the high-frequency segment, while the apex of the BM is mainly in the low frequency. Different points of BM correspond to different CF, which demonstrates the frequency selectivity of the BM.

This paper fits the τ-z curve of a single pile by mathematical methods. Based on the one-dimensional similarity of the τ-z curves, the τ-z curves of single pile under different loads are derived. It studies the distribution of the axial force of a single pile by taking the self-weight of the pile and the pile-end resistance ratio into account and establishes the calculated equation of settlement for single pile. The mutual reinforcing effect between the piles is fully considered, and the settlement of each foundation pile in the pile group is deduced in use of shear displacement method. The example analysis shows that the axial force distribution of single pile considering the self-weight and the pile-end resistance ratio is in good agreement with the experimental data. The settlement error of a single pile calculated by the traditional method is 18.52% compared with measured value. When the self-weight and end resistance ratio are not considered, the error reaches 2.26%. However, the error could reduce to 1.64% when they are taken into consideration. It has a good applicability to calculate the settlement of pile group through the τ-z curves of single pile. Also, it can better forecast the settlement behavior of the pile group under similar conditions.

The quasi-three-dimensional effect induced by functional groups (FGo) and the in-plane stress and structural deformation induced by grain boundaries (GBs) may produce more novel physical effects. These physical effects are particularly significant in high-temperature environments and are different from the behavior in bulk materials, so its physical mechanism is worth exploring. Considering the external field (strain and temperature field), the internal field (FGo and GBs) and the effect of distance between FGs and GBs on the bonding energy, configuration transition, and stress distribution of graphene/h-BN with FGo and GBs (GrO-BN-GBs) in the interface region were studied by molecular dynamics (MD). The results show that the regions linked by hydroxyl + epoxy groups gradually change from honeycomb to diamond-like structures as a result of a hybridization transition from sp2 to sp3. The built-in distortion stress field generated by the coupling effect of temperature and tension loading induces the local geometric buckling of two-dimensional materials, according the von Mises stresses and deflection theory. In addition, the internal (FGo and GBs) and external field (strain and temperature field) have a negative chain reaction on the mechanical properties of GrO-BN-GBs, and the negative chain reaction increases gradually with the increase in the distance between FGo and GBs. These physical effects are particularly obvious in high-temperature environments, and the behavior of physical effects in two-dimensional materials is different from that in bulk materials, so its physical mechanism is worth exploring.

Tension-leg platforms have attracted increasing attention due to their smaller motion responses in platform planes among various offshore floating platforms. To better utilize wind energy sources, this paper carried out an improved modelling calculation for tension-leg floating foundations. A comparative study was conducted on the dynamic responses under environmental loading conditions via altering the tension legs’ connection angle. Based on potential flow theory and the Morison formulation, this paper established a complex system of tension-leg platforms under coupled nonlinear loads. After considering tension legs with different angles under the same or different environmental loads, numerical simulations were performed using AQWA for motion responses. Following this, the restraining effect on the platform motion responses and the tension changes of the tension legs are further discussed. The results indicate that compared with the existing tension-leg connection mode, this paper’s model could effectively reduce the dynamic responses in surge and pitch and improve the stability and safety of tension-leg platforms.

Abstract By using the coincidence degree theorem, we obtain a new result on the existence of solutions for a class of fractional differential equations with periodic boundary value conditions, where a certain nonlinear growth condition of the nonlinearity needs to be satisfied. Furthermore, we study another class of differential equations of fractional order with periodic boundary conditions at resonance. A new result on the existence of positive solutions is presented by use of a Leggett–Williams norm-type theorem for coincidences. Two examples are given to illustrate the main result at the end of this paper.

Background/Aims: This study used Rho-associated protein kinase (ROCK) isoform-selective suppression or a ROCK inhibitor to analyze the roles of ROCK1 and ROCK2 in regulating endothelial dysfunction triggered by oxidized low-density lipoprotein (oxLDL). Methods: ROCK1 or ROCK2 expression in human umbilical vein endothelial cells (HUVECs) was suppressed by small interfering RNA (siRNA). HUVECs were pretreated with 30 μM Y27632 (pan ROCK inhibitor) for 30 min before exposure to 200 μg/mL oxLDL for an additional 24 h. Cell viability was determined by the MTT assay, and cell apoptosis was evaluated by the TUNEL assay. Protein expression and phosphorylation were assessed by Western blot analysis. The morphology of total and phosphorylated vimentin (p-vimentin) and the co-localization of vimentin with vascular cell adhesion molecule 1 (VCAM-1) and intercellular adhesion molecule 1 (ICAM-1) were detected by the immunofluorescence assay. The adhesion of promonocytic U937 cells to HUVECs was observed by light microscopy. Results: ROCK2 suppression or Y27632 treatment, rather than ROCK1 deletion, effectively reduced endothelial cell apoptosis and preserved cell survival. ROCK2 suppression exhibited improved vimentin and p-vimentin cytoskeleton stability and decreased vimentin cleavage by attenuating caspase-3 activity. In addition, increased p-vimentin expression induced by oxLDL was significantly inhibited by ROCK2 deletion or Y27632 treatment. In contrast, ROCK1 suppression showed no obvious effects on the vimentin cytoskeleton, but significantly regulated the expression of adhesion molecules. Endothelial ICAM-1 or VCAM-1 expression induced by oxLDL was obviously inhibited by ROCK1 suppression or Y27632 treatment. Moreover, the expression of ICAM-1 induced by oxLDL could also be reduced by ROCK2 suppression. Furthermore, ROCK2 deficiency or Y27632 treatment inhibited the redistribution of adhesion molecules and their co-localization with vimentin caused by oxLDL. These effects resulted in the significant inhibition of monocyte-endothelial adhesion induced by oxLDL. Conclusion: The results of this study support the novel concept that ROCK1 is involved in oxLDL-induced cell adhesion by regulating adhesion molecule expression, whereas ROCK2 is required for both endothelial apoptosis and adhesion by regulating both the vimentin cytoskeleton and adhesion molecules. Consequently, ROCK1 and ROCK2 have distinct roles in the regulation of oxLDL-mediated endothelial dysfunction.

Perivascular adipose tissue (PVAT) homeostasis plays an important role in maintaining vascular function, and PVAT dysfunction may induce several pathophysiological situations. In this study, we investigated the effect and mechanism of the local angiotensin II (Ang II) on PVAT. High-throughput comparative proteomic analysis, based on TMT labeling combined with LC-MS/MS, were performed on an in vivo Ang II infusion mice model to obtain a comprehensive view of the protein ensembles associated with thoracic PVAT (tPVAT) dysfunction induced by Ang II. In total, 5037 proteins were confidently identified, of which 4984 proteins were quantified. Compared with the saline group, 145 proteins were upregulated and 146 proteins were downregulated during Ang II-induced tPVAT pathogenesis. Bioinformatics analyses revealed that the most enriched GO terms were annotated as gene silencing, monosaccharide binding, and extracellular matrix. In addition, some novel proteins, potentially associated with Ang II infusion, were identified, such as acyl-CoA carboxylase α, very long-chain acyl-CoA synthetase (ACSVL), uncoupling protein 1 (UCP1), perilipin, RAS protein-specific guanine nucleotide-releasing factor 2 (RasGRF2), and hypoxia inducible factor 1α (HIF-1α). Ang II could directly participate in the regulation of lipid metabolism, transportation, and adipocyte differentiation by affecting UCP1 and perilipin. Importantly, the key KEGG pathways were involved in fatty acid biosynthesis, FABP3-PPARα/γ, RasGRF2-ERK-HIF-1α, RasGRF2-PKC-HIF-1α, and STAT3-HIF-1α axis. The present study provided the most comprehensive proteome profile of mice tPVAT and some novel insights into Ang II-mediated tPVAT dysfunction and will be helpful for understanding the possible relationship between local RAS activation and PVAT dysfunction.

RhoGTPase is involved in PDGF-BB-mediated VSMC phenotypic modulation. RhoGDIs are key factors in regulating RhoGTPase activation. In the present study, we investigated the regulatory effect of RhoGDI1 on the activation of RhoGTPase in VSMC transformation and neointima formation. Western blot and co-immunoprecipitation assays showed that the PDGF receptor inhibition by crenolanib promoted RhoGDI1 polyubiquitination and degradation. Inhibition of RhoGDI1 degradation via MG132 reversed the decrease in VSMC phenotypic transformation. In addition, RhoGDI1 knockdown significantly inhibited VSMC phenotypic transformation and neointima formation in vitro and in vivo. These results suggest that PDGF-BB promotes RhoGDI1 stability via the PDGF receptor and induces the VSMC synthetic phenotype. The co-immunoprecipitation assay showed that PDGF-BB enhanced the interaction of RhoGDI1 with Cdc42 and promoted the activation of Cdc42; these enhancements were blocked by crenolanib and RhoGDI1 knockdown. Moreover, RhoGDI1 knockdown and crenolanib pretreatment prevented the localization of Cdc42 to the plasma membrane (PM) to activate and improve the accumulation of Cdc42 on endoplasmic reticulum (ER). Furthermore, Cdc42 inhibition or suppression significantly reduced VSMC phenotypic transformation and neointima formation in vitro and in vivo. This study revealed the novel mechanism by which RhoGDI1 stability promotes the RhoGDI1-Cdc42 interaction and Cdc42 activation, thereby affecting VSMC phenotypic transformation and neointima formation.

In this work, the defects (local stress generated) induce the formation of graphene/h-BN planar heterostructure (Gr-hBN-PH) to form "unsteady structure". Then, the coupling effects of external field (heat flow direction, strain and temperature field) and internal field (defect number, geometry shape and interfacial configuration) on the interface thermal conductivity (ITC) of Gr-hBN-PH were studied. The results show phonon transmission is less affected by compression deformation under the action of force-heat-defect coupling, while phonon transmission of heterostructure is more affected by tensile deformation. The non-harmonic interaction of the atoms in the composite system is strengthened, causing the softening of high-frequency phonons. The greater reduction of thermal transport at the interface of heterostructures will be. The interface bonding morphology plays a significant role on the ITC of the Gr-hBN-PH. The relationship between structure and properties in the low dimension is analyzed from the perspective of defect energy. It is helpful for us to understand the physical mechanism of low-dimensional structure, realize multiple structural forms, and even explore new uses.

Graphene and graphene oxide (GO) usually have grain boundaries (GBs) in the process of synthesis and preparation. Here, we “attach” GBs into GO, a new molecular configuration i.e., polycrystalline graphene oxide (PGO) is proposed. This paper aims to provide an insight into the stability and mechanical properties of PGO by using the molecular dynamics method. For this purpose, the “bottom-up” multi-structure-spatial design performance of PGO and the physical mechanism associated with the spatial structure in mixed dimensions (combination of sp2 and sp3) were studied. Also, the effect of defect coupling (GBs and functional groups) on the mechanical properties was revealed. Our results demonstrate that the existence of the GBs reduces the mechanical properties of PGO and show an “induction” role during the tensile fracture process. The presence of functional groups converts in-plane sp2 carbon atoms into out-of-plane sp3 hybrid carbons, causing uneven stress distribution. Moreover, the mechanical characteristics of PGO are very sensitive to the oxygen content of functional groups, which decrease with the increase of oxygen content. The weakening degree of epoxy groups is slightly greater than that of hydroxyl groups. Finally, we find that the mechanical properties of PGO will fall to the lowest values due to the defect coupling amplification mechanism when the functional groups are distributed at GBs.

Background: In this study, we investigated the mechanism of Rho GTPases signaling on Ang II-mediated cell migration and dedifferentiation in human aortic vascular smooth muscle cells (HA-VSMCs) and an Ang II-infusion mouse model. Methods: Cells were pretreated with different inhibitors or Ang II. Cell migration was detected by Wound healing and Transwell assay. Mice were treated with Ad-RhoA-shRNA virus or Irbesartan or fasudil and then infused with Ang II. Results: Ang II treatment induced HA-VSMCs migration in a dose- and time-dependent manner and reduced the expression of VSMC contractile proteins. These effects were significantly suppressed by the inhibition of Ang II type 1 receptor (AT1 receptor), RhoA, and Rho-associated kinase (ROCK). Furthermore, Ang II treatment promoted the activation of RhoA and ROCK, which was reduced by AT1 receptor inhibition. Meanwhile, Ang II treatment induced F-actin polymerization, which was inhibited after ROCK inhibition. In mice, Ang II infusion increased VSMC migration into the neointima and reduced VSMC differentiation proteins levels, and these effects were shown to be dependent on AT1 receptor and RhoA/ROCK pathway. Conclusion: This study reveals a novel mechanism by which Ang II regulates RhoA/ROCK signaling and actin polymerization via AT1 receptor and then affects VSMC dedifferentiation.

Space-deployable habitat modules provide artificial habitable environments for astronauts and will be widely used for the construction of future space stations and lunar habitats. A novel structural design concept of space-deployable habitat modules consisting of flexible composite shells and deployable trusses has been proposed. Geometric relationships of deployable trusses based on two types of scissor elements were formulated. Flexible composite shells of space habitat modules were designed, and a nonlinear FEA model using ANSYS software was described. Considering folding efficiencies, stiffness, and strength of the structures, the influences of design parameters were analyzed and the final design scheme of space-deployable habitat modules was determined. After detailing the structural designs, low-speed impact dynamic responses between the structures and a stainless steel cylinder were simulated. The analysis results show that dynamic responses are only significant at the point of low-speed impact. The works will provide technical supports for structural designs and engineering applications of space-deployable habitat modules.

Al-polymer laminated membranes are widely used in large aerospace structures. When the laminated membranes are pressurized, wrinkles emerge, which have an important effect on the performance of the structures during operation. This paper describes the numerical simulation and experimental investigation of wrinkles in laminated membranes. The nonlinear postbuckling analysis method, based on laminated thin-shell elements, was used to simulate the onset, growth, and final configuration of wrinkles when laminated membranes are subjected to external loads. The simulations are conducted with the ANSYS finite element package. Changing regularities of number, wavelength, and range for the wrinkles during the onset and growth processes are investigated. The wrinkles of laminated membranes with different design parameters such as material selection, ply number, ply angle, and ply mode are predicted. Devices that can be used to clamp and load laminated membranes in several load cases were designed and developed. A 3D photogrammetry system was constructed to characterize wrinkling patterns of laminated membranes subjected to shear displacement loads. By comparing the results of numerical analysis and experimental results, the accuracy of the numerical analysis method was verified. This study work is expected to inform wrinkling simulation and shape control of aerospace laminated membrane structures.

Background: Endothelial cell dysfunction triggered by oxidized low-density lipoprotein (oxLDL) is the main event occurring during the development of atherosclerosis. 2,3,5,4'-tetrahydroxystilbene-2-O-β-D-glucoside (TSG), an active component of the rhizome extract from Polygonum multiflorum, exhibits significant anti-atherosclerotic activity. However, the protective effects of TSG against oxLDL-induced endothelial dysfunction have not been clarified. We investigated the cytoprotective effects of TSG in human umbilical vein endothelial cells (HUVECs) and explored underlying mechanisms. Methods and Results: TSG pretreatment markedly attenuated oxLDL-mediated loss of cell viability, release of lactate dehydrogenase (LDH), cell apoptosis, and monocyte adhesion. OxLDL increased vimentin mRNA and protein levels, vimentin cleavage, caspase-3 activation, adhesion molecules levels and their colocalization with vimentin in HUVECs. These alterations were attenuated by pretreatment with TSG. Meanwhile, TSG inhibited both the expression of TGFβ1 and the phosphorylation of Smad2 and Smad3, and TSG suppressed the nuclear translocation of Smad4 induced by oxLDL. Using shRNA, oxLDL-induced cell apoptosis and monocyte adhesion were significantly inhibited by vimentin suppression in HUVECs. Conclusions: These results suggest that TSG protects HUVECs against oxLDL-induced endothelial dysfunction through inhibiting vimentin expression and cleavage, and the expression of adhesion molecules and their colocalization with vimentin. The interruption of TGFβ/Smad pathway and caspase-3 activation appears to be responsible for the downregulation of TSG on vimentin expression and fragmentation, respectively.

Chronic hepatitis C is a serious liver disease that often results in cirrhosis or hepatocellular carcinoma. The aim of this study was to assess the association of human leukocyte antigen-DP (HLA-DP) variants with risk of chronic hepatitis C virus (HCV) or anti-F antibody generation. We selected two single nucleotide polymorphisms (SNPs) in a region including HLA-DPA1 (rs3077) and HLA-DPB1 (rs9277534) and genotyped SNPs in 702 cases and 342 healthy controls from the Chinese population using TaqMan SNP genotyping assay. Moreover, the exon 2 of the HLA-DPA1 and HLA-DPB1 genes were amplified and determined by sequencing-based typing (SBT). The results showed that rs3077 significantly increased the risk of chronic HCV infection in additive models and dominant models (odds ratio (OR) = 1.32 and 1.53). The rs3077 also contributed to decrease the risk of anti-F antibody generation in additive models and dominant models (OR = 0.46 and 0.56). Subsequent analyses revealed the risk haplotypes (DPA1*0103-DPB1*0501 and DPA1*0103-DPB1*0201) and protective haplotypes (DPA1*0202-DPB1*0501 and DPA1*0202-DPB1*0202) to chronic HCV infection. Moreover, we also found that the haplotype of DPA1*0103-DPB1*0201 and DPA1*0202-DPB1*0202 were associated with the anti-F antibody generation. Our findings show that genetic variants in HLA-DP gene are associated with chronic HCV infection and anti-F antibody generation.

One of the miraculous functions of graphene is to use its defects to alter the material properties of graphene composites and, thereby, expand the application of graphene in other fields. In this paper, various defects have been created in graphene by using ion irradiation. Defective graphene is sandwiched between two copper layers. A numerical model of Graphene/Copper layered composites after irradiation damage was established by the molecular dynamics method. The effects of ion irradiation and temperature coupling on defective graphene/copper composites were studied. The results show that there are a lot of empty defects in graphene after irradiation injury, which will produce more incomplete bonding. Although the bonds between carbon atoms can be weakened, defective graphene still enhances the mechanical properties of pure copper. At the same time, the location and arrangement of defects have a great influence on the mechanical stability of graphene/copper composites, and the arrangement of empty defects has different effects on deformation behavior and the stress transfer mechanism. It can be concluded that the defects formed by radiation have an effect on the physical properties of two-dimensional materials. Therefore, irradiation technology can be used to artificially control the formation of defects, and then make appropriate adjustments to their properties. This can not only optimize the radiation resistance and mechanical properties of nuclear materials, but also expand the application of graphene in electronic devices and other fields.

The mechanical properties of graphene/hexagonal boron nitride (G/h-BN) heterobilayer nanosheets coupled by interlayer sp ^3 bonds and defects have been investigated by using the molecular dynamics (MD) simulation. For this purpose, interlayer sp ^3 bonds and two kinds of geometric imperfection (including rhombus and square nanopore) are formed in the G/h-BN heterobilayer nanosheets. The effects of adding the nanopore diameter, interlayer sp ^3 bonds fraction, and the influence of different position of geometric imperfection in heterobilayer nanostructure on mechanical properties have been investigated. The result shows that when sp ^3 bonds and nanopore coexist, the mechanical properties of defective graphene layer are higher than that of defective hexagonal boron nitride (h-BN) layer. Meanwhile, the negative effect of rhomboid nanohole on mechanical properties of heterostructure is weaker than that of square nanohole. It is observed that that interlayer sp ^3 bonds have greatest influence on the fracture strain of G/h-BN heterobilayer nanostructure, followed by fracture stress, and finally Young’s modulus. Another important point is that interlayer sp ^3 bonds can be regarded as a special defect, and its value seems to outweigh the intrinsic defects.

A new damage identification method for bridge scour was proposed, in the case that it was difficult to detect bridge scour depth applying testing equipment. Through integrative application of the eigensystem realization algorithm (ERA) and method of support vector machine (SVM), this method was used to identify the scour depths of bridge under conditions of ambient excitation. The following three steps are necessary for the application of this method to identify bridge scour. Firstly, a sample library about scour depth and upper structure vibration response was established using numerical methods and support vector machine method. Secondly, free response signal of bridge were extracted from random vibration signal of bridge upper structure using random decrement technique. Thirdly, based on above two steps, the bridge scour depth was identified using ERA and SVM. In the process of applying the method to identify bridge scour depth, the key is to find the sensitive points for scour depth of substructure using sample library and to gather the vibration response signal of accelerated velocity under conditions of ambient excitation. It was identified that the method has higher recognition accuracy and better robustness through experiments on a real bridge. The method provided a new way for identifying scour depth of bridges.

A method of damage identification of piles was established by using vibration characteristics. The approach focused on the application of the element strain energy and sensitive modals. A damage identification equation of piles was deduced using the structural vibration equation. The equation contained three major factors: change rate of element modal strain energy, damage factor of pile, and sensitivity factor of modal damage. The sensitive modals of damage identification were selected by using sensitivity factor of modal damage firstly. Subsequently, the indexes for early-warning of pile damage were established by applying the change rate of strain energy. Then the technology of computational analysis of wavelet transform was used to damage identification for pile. The identification of small damage of pile was completely achieved, including the location of damage and the extent of damage. In the process of identifying the extent of damage of pile, the equation of damage identification was used in many times. Finally, a stadium project was used as an example to demonstrate the effectiveness of the proposed method of damage identification for piles. The correctness and practicability of the proposed method were verified by comparing the results of damage identification with that of low strain test. The research provided a new way for damage identification of piles.

Previous studies showed that prostacyclin inhibited fibrosis. However, both receptors of prostacyclin, prostacyclin receptor (IP) and peroxisome proliferator-activated receptor (PPAR), are abundant in cardiac fibroblasts. Here we investigated which receptor was vital in the anti-fibrosis effect of prostacyclin. In addition, the possible mechanism involved in protective effects of prostacyclin against cardiac fibrosis was also studied. We found that beraprost, a prostacyclin analogue, inhibited angiotensin II (Ang II)-induced neonatal rat cardiac fibroblast proliferation in a concentration-dependent and time-dependent manner. Beraprost also suppressed Ang II-induced collagen I mRNA expression and protein synthesis in cardiac fibroblasts. After IP expression was knocked down by siRNA, Ang II-induced proliferation and collagen I synthesis could no longer be rescued by beraprost. However, treating cells with different specific inhibitors of PPAR subtypes prior to beraprost and Ang II stimulation, all of the above attenuating effects of beraprost were still available. Moreover, beraprost significantly blocked transforming growth factor β (TGF β) expression as well as Smad2 phosphorylation and reduced Smad-DNA binding activity. Beraprost also increased phosphorylation of cAMP response element binding protein (CREB) at Ser133 in the nucleus. Co-immunoprecipitation analysis revealed that beraprost increased CREB but decreased Smad2 binding to CREB-binding protein (CBP) in nucleus. In conclusion, beraprost inhibits cardiac fibroblast proliferation by activating IP and suppressing TGF β-Smad signal pathway.