Search

Abstract CD73, a cell surface-bound nucleotidase, serves as a crucial metabolic and immune checkpoint. Several studies have shown that CD73 is widely expressed on immune cells and plays a critical role in immune escape, cell adhesion and migration as a costimulatory molecule for T cells and a factor in adenosine production. However, recent studies have revealed that the protumour effects of CD73 are not limited to merely inhibiting the antitumour immune response. Nicotinamide adenine dinucleotide (NAD+) is a vital bioactive molecule in organisms that plays essential regulatory roles in diverse biological processes within tumours. Accumulating evidence has demonstrated that CD73 is involved in the transport and metabolism of NAD, thereby regulating tumour biological processes to promote growth and proliferation. This review provides a holistic view of CD73-regulated NAD + metabolism as a complex network and further highlights the emerging roles of CD73 as a novel target for cancer therapies.

In this study, we designed a molecularly imprinted polymers-dispersive solid-phase extraction-high-performance liquid chromatography (MIPs-DSPE-HPLC) method, as a simple and efficient platform for the sensitive detection of two sulfonamide antibiotics (SAs) of sulfamethoxine (SMM) and sulfamethoxazole (SMZ) in environmental water samples. Using SMM and SMZ as templates, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the crosslinking agent, and azodiisobutyronitrile as the catalyst, the dual-template molecularly imprinted polymers (dt-MIPs) were successfully synthesized via surface imprinting technology and multi-template imprinting strategy. The adsorption properties of the prepared MIPs were characterized, and the adsorption capacities of MIPs towards SMZ and SMM were 27.35 mg/g and 30.92 mg/g, respectively. The detection limits of the method in three environmental water samples were in the range of 0.23–1.74 μg/L, and the recoveries were between 82.7 and 110.3%, with relative standard deviations less than 5.93%. The construction process of this MIPs-DSPE-HPLC method is straightforward, exhibits high sensitivity and selectivity, and thus provides a versatile method for the quantification of SAs in complex matrices.

The rate of urbanization is increasing, and solutions to the pollution issue are desperately needed. Urban street trees are an essential factor in improving the environmental quality of cities. Quantifying precise ecological benefits of individual trees is important for monitoring urban ecology. However, since street tree surveys are time-consuming and expensive, it is challenging to assess the ecological benefits of street trees. Besides, there is still a need for more investigation into the advantages of multi-source data for ecological benefits estimates. Effective living vegetation volume (eLVV) as an urban green space indicator is beneficial for providing the vertical structure of street trees and offering a possibility for estimating the ecological benefits. The objective of this study is to evaluate the accurate ecological benefits of street trees by calculating eLVV. We developed and validated a framework for evaluating the ecological benefits of urban vegetation using point cloud and image processing techniques. Terrestrial laser scanning and unmanned aerial vehicle data were used to predict indicators at the single tree scale and road scale. Models based on game theory were applied to score all the indicators and assess the ecological benefits. The results showed that: (1) The proposed framework demonstrated that multi-source data allowed for the exact indicators of ecological benefits. (2) The eLVV of the street trees on two roads was less on the north side than on the south side, reflecting the difference in the ecology of the street trees in terms of orientation. This paper explores the advantages of multi-source data in measuring detailed ecological benefits, which support the digital management of street trees and the sustainability of regional ecology.

Gelatin-based hydrogels with excellent mechanical properties and conductivities are desirable, but their fabrication is challenging. In this work, an innovative approach for the preparation of gelatin-based conductive hydrogels is presented that improves the mechanical and conductive properties of hydrogels by integrating Z–Gln–Gly into gelatin polymers via enzymatic crosslinking. In these hydrogels (Gel–TG–ZQG), dynamic π–π stacking interactions are created by the introduction of carbobenzoxy groups, which can increase the elasticity and toughness of the hydrogel and improve the conductivity sensitivity by forming effective electronic pathways. Moreover, the mechanical properties and conductivity of the obtained hydrogel can be controlled by tuning the molar ratio of Z–Gln–Gly to the primary amino groups in gelatin. The hydrogel with the optimal mechanical properties (Gel–TG–ZQG (0.25)) exhibits a high storage modulus, compressive strength, tensile strength, and elongation at break of 7.8 MPa at 10 °C, 0.15 MPa at 80% strain, 0.343 MPa, and 218.30%, respectively. The obtained Gel–TG–ZQG (0.25) strain sensor exhibits a short response/recovery time (260.37 ms/130.02 ms) and high sensitivity (0.138 kPa−1) in small pressure ranges (0–2.3 kPa). The Gel–TG–ZQG (0.25) hydrogel-based sensors can detect full-range human activities, such as swallowing, fist clenching, knee bending and finger pressing, with high sensitivity and stability, yielding highly reproducible and repeatable sensor responses. Additionally, the Gel–TG–ZQG hydrogels are noncytotoxic. All the results demonstrate that the Gel–TG–ZQG hydrogel has potential as a biosensor for wearable devices and health-monitoring systems.

Abstract Background Delayed-onset post stroke cognitive impairment (PSCI) results from secondary neurodegeneration induced by stroke. Whereas targeted prevention or treatment strategies are still missing due to lack of evidences. This trial aims to evaluate the preventive effects of DL-3-n-butylphthalide (NBP) on delayed-onset PSCI. Methods Effects of NBP on Delayed-onset Post Stroke Cognitive Impairment (End-PSCI) is a prospective, parallel-group, open-label, multicenter, randomized controlled trial with blinded outcome assessment. Hospital patients with acute cerebral infarction (within 2 weeks of onset) will be randomized into either standard medical therapy group or standard medical therapy combined NBP treatment group (NBP 200 mg, three times per day for 24 weeks). The primary outcome is the difference of incidence of delayed-onset PSCI between two groups. The secondary outcomes include difference of white matter degeneration, cognitive scores and prevalence of early-onset PSCI between two groups. Discussion End-PSCI trial will provide evidences for NBP preventing delayed-onset PSCI. The secondary outcomes will also provide valuable insights into the pathogenesis of delayed-onset PSCI and mechanism of NBP’s actions. Trial registration Trialsearch.who.int , ChiCTR2000032555, 2020/5/2, prospectively registered.

Amino-functionalized silica@resorcinol–formaldehyde nanocomposites (NH2-SiO2@RF) were synthesized for the removal of Cr(VI) from aqueous solutions using the sol–gel technique with two simple preparation steps, including the one-pot synthesis of SiO2@RF using the Stöber method and (3-aminopropyl)triethoxysilane (APTES) modification. The morphology, particle size, functional group, and thermal stability of the obtained nanocomposites were systematically characterized, with the results indicating a uniform sphericity with a particle size of 200 nm and high thermal stability. The adsorption results demonstrated that the preferred pH value was 2, and the data were well fitted with the Langmuir and Temkin isotherm models and quasi-second-order kinetic equation, indicating a high adsorption capacity. The maximum Cr(VI) adsorption capacity from the nonlinear form of the Langmuir model was 272.6 mg·g−1. The intra-particle diffusion model accurately described the adsorption of Cr(VI) onto NH2-SiO2@RF. The changes in Gibb’s free energy, enthalpy, and entropy revealed that Cr(VI) adsorption onto NH2-SiO2@RF was a spontaneous and endothermic process. Furthermore, high selectivity was demonstrated in the material for the removal of Cr(VI) from commonly coexisting ions. The obtained nanocomposites had good regeneration properties and maintained a removal rate above 85% in the fifth adsorption–desorption experiments. Moreover, under the optimized adsorption conditions, the obtained nanocomposites were preliminarily applied to tannery wastewater, demonstrating an excellent removal effect, which indicates their potential application value.

Controlling NOx and CO2 emissions from heavy-duty diesel vehicles (HDDVs) is receiving increasing attention. Accurate measurement of HDDV NOx and CO2 emissions is the prerequisite for HDDV emission control. Vehicle emission regulations srecommend the measurement of NOx and CO2 emissions from vehicles using an emission analyzer, which is expensive and unsuitable to measure a large number of vehicles in a short time. The on-board diagnostics (OBD) data stream of HDDVs provides great convenience for calculating vehicle NOx and CO2 emissions by providing the engine fuel flow rate, NOx sensor output, and air mass flow. The calculated vehicle NOx and CO2 emissions based on the OBD data were validated by testing a heavy-duty truck’s emissions on the chassis dynamometer over the CHTC-HT driving cycle, showing that the calculated NOx and CO2 emissions based on the OBD data are consistent with the measured results by the emission analyzer. The calculated vehicle fuel consumptions based on the OBD data were close to the calculated results based on the carbon balance method and the measured results by the fuel flowmeter. The experimental results show that accessing vehicle NOx and CO2 emissions based on the OBD data is a convenient and applicable method.

The delivery system of antibiotics plays an important role in increasing the drug efficacy and reducing the risks of off-target toxicities and antibiotic resistance. The pathophysiology of bacterial infections is similar to that of tumor tissues, but only a few delivery systems have been able to target and release antibiotics on demand. Herein, we designed and developed a robust Chitosan-SS-Levofloxacin (CS-SS-LF) micelles for targeted antibiotic delivery, in which disulfide bond can be reduced by hydrogen sulfide (H2S), a typical product of Salmonella, and subsequently released antibiotic to eradicate Salmonella infection. CS-SS-LF micelles showed uniform size and sharp response to H2S. Compared with levofloxacin alone, these micelles possessed a better capacity in disrupting Salmonella biofilms and reducing bacterial burden in organs. The H2S-sensitive CS-SS-LF micelles might enable a new way to address bacterial infections.

The brown planthopper (BPH; Nilaparvata lugens) is an important pest in rice cultivation, and chemical pesticide over-use and ineffectiveness of existing Bt transgenic rice against piercing-sucking insects make novel control methods necessary. RNA interference (RNAi) biopesticide is a new type of product with high efficiency and specificity and are simple to use. The Notch signaling pathway has extensive and important physiological functions and plays a key role in the development of insects. In this study, two key ligand genes of the Notch signaling pathway, delta (dl) and jagged (jag), were selected and their lethal effects and functional analysis were systematically evaluated using a stable short-winged population (Brachypterous strain) and a long-winged population (Macropterous strain) of BPHs. The full-length coding sequences of Nldl and Nljag comprised 1,863 and 3,837 base pairs, encoding 620 and 1,278 amino acids, respectively. The nucleic acid sequences of Nldl and Nljag were identical between the two strains. The expression levels of Nldl and Nljag were relatively high in the head of the nymphs, followed by those in the abdomen. Through RNAi treatment, we found that injection of BPH nymphs of both strains with dsNldl (10–50 ng/nymph) or dsNljag (100 ng/nymph) produced lethal or teratogenic effects. dsRNA treatment showed excellent inhibitory effects on the expression of target genes on days 1 and 5, suggesting that RNAi rapidly exhibits effects which persist for long periods of time in BPHs. Taken together, our results confirm the potential of Nldl and Nljag as target genes of RNAi biopesticides, and we propose optimized dosages for the control of BPHs.

RNA interference (RNAi)-based biopesticides are novel biologic products, developed using RNAi principles. They are engineered to target genes of agricultural diseases, insects, and weeds, interfering with their target gene expression so as to hinder their growth and alleviate their damaging effects on crops. RNAi-based biopesticides are broadly classified into resistant plant-based plant-incorporated protectants (PIPs) and non-plant-incorporated protectants. PIP RNAi-based biopesticides are novel biopesticides that combine the advantages of RNAi and resistant transgenic crops. Such RNAi-based biopesticides are developed through nuclear or plastid transformation to breed resistant plants, i.e., dsRNA-expressing transgenic plants. The dsRNA of target genes is expressed in the plant cell, with pest and disease control being achieved through plant-target organism interactions. Here, we review the action mechanism and strategies of RNAi for pest management, the development of RNAi-based transgenic plant, and the current status and advantages of deploying these products for pest control, as well as the future research directions and problems in production and commercialization. Overall, this study aims to elucidate the current development status of RNAi-based biopesticides and provide guidelines for future research.

Abstract Background New therapies are urgently needed for Alzheimer’s disease (AD). Sodium oligomannate (GV-971) is a marine-derived oligosaccharide with a novel proposed mechanism of action. The first phase 3 clinical trial of GV-971 has been completed in China. Methods We conducted a phase 3, double-blind, placebo-controlled trial in participants with mild-to-moderate AD to assess GV-971 efficacy and safety. Participants were randomized to placebo or GV-971 (900 mg) for 36 weeks. The primary outcome was the drug-placebo difference in change from baseline on the 12-item cognitive subscale of the Alzheimer’s Disease Assessment Scale (ADAS-cog12). Secondary endpoints were drug-placebo differences on the Clinician’s Interview-Based Impression of Change with caregiver input (CIBIC+), Alzheimer’s Disease Cooperative Study-Activities of Daily Living (ADCS-ADL) scale, and Neuropsychiatric Inventory (NPI). Safety and tolerability were monitored. Results A total of 818 participants were randomized: 408 to GV-971 and 410 to placebo. A significant drug-placebo difference on the ADAS-Cog12 favoring GV-971 was present at each measurement time point, measurable at the week 4 visit and continuing throughout the trial. The difference between the groups in change from baseline was − 2.15 points (95% confidence interval, − 3.07 to − 1.23; p

BackgroundCoronary heart disease (CHD) is closely associated with cognitive impairment, especially in severe cases of heart failure. However, it is unclear whether cardiac systolic function plays a role in the relationship between pre-existing CHD and cognitive impairment in subjects without clinical heart failure.MethodsIn total, 208 subjects from the First Affiliated Hospital of Xi’an Jiaotong University were recruited from June 2014 to January 2015, and were divided into CHD (n = 118) and non-CHD (n = 90) groups according to the inclusion and exclusion criteria. The global cognitive function of all subjects was assessed by the Mini-Mental State Examination (MMSE) and cognitive impairment was defined as the score lower than the cutoff value. Left ventricular ejection fraction (LVEF) was measured using transthoracic echocardiograms. The relationship among pre-existing CHD, LVEF, and cognitive impairment was analyzed by multivariate logistic regression.ResultsIn total, 34 subjects met the criteria of cognitive impairment. Univariate analysis showed that the cognitive impairment prevalence in the CHD group was significantly higher than that in the non-CHD group (22.0 vs. 8.9%, p = 0.011). Multivariate logistic analysis revealed that CHD was significantly associated with a higher risk of cognitive impairment (odds ratio [OR] = 3.284 [95% CI, 1.032–10.450], p = 0.044) after adjusting for confounds except for LVEF. However, the OR of CHD decreased (OR = 2.127 [95% CI, 0.624–7.254], p = 0.228) when LVEF was further corrected as a continuous variable, and LVEF was negatively associated with the risk of cognitive impairment (OR = 0.928 [95% CI, 0.882–0.976], p = 0.004).ConclusionPre-existing CHD is associated with a higher risk of cognitive impairment, and such an association can be considerably explained by reduced LVEF. An impaired cardiac systolic function may play a key role in the relationship between CHD and cognitive impairment among patients with pre-heart failure conditions.

Remote sensing detection of vehicle emissions is an effective supplement to the statutory periodic inspection of in-use vehicle emissions and it is a convenient technical method for real-time screening of high-emission vehicles. The principle of remote sensing detection is to inversely calculate the absolute concentrations of gaseous pollutants in vehicle exhaust according to the relative volume concentration ratio of each exhaust component to carbon dioxide (CO2) in the vehicle exhaust plume. Because the combustion mechanisms of gasoline engines and diesel engines are different, different inversion calculation methods of remote sensing data must be applied. The absolute concentrations of gasoline vehicle gaseous emissions measured by remote sensing can be calculated by the inversion calculation method based on the theoretical air–fuel ratio combustion mechanism. However, the absolute concentrations of diesel vehicle nitrogen oxide (NOx) measured by remote sensing must be calculated by the inversion calculation method based on the correction of the excess air coefficient. For the integrated remote sensing test system of gasoline and diesel vehicles, it is necessary to determine the vehicle category according to the vehicle type and license plate and adopt different inversion calculation methods to obtain the correct remote sensing results of vehicle emissions. The big data statistical analysis method for vehicle emission remote sensing results can quickly screen high-emission vehicles and dynamically determine the remote sensing emission screening threshold of high-emission vehicles as the composition of in-use vehicles changes and the overall emission of vehicles declines, so as to achieve dynamic and accurate screening of high-emission vehicles.

Abuse and residues of antibiotics cause great harm to organisms and the environment. Appropriate sample pretreatment is usually required for sensitive determination, because of the low content presence of a variety of antibiotics in complicated matrices. Molecular-imprinting-based solid-phase extraction (MISPE) has been widely used for sample pretreatment of antibiotics, using molecularly imprinted polymers (MIPs) as adsorbents. Herein, we comprehensively review the recent advances of MISPE of antibiotics, followed by chromatographic analysis. Various solid-phase extraction (SPE) modes based on MIPs are briefly introduced, such as conventional SPE, dispersive SPE, magnetic SPE, matrix solid-phase dispersion, and pipette-tip SPE. Then, several emerging preparation techniques for antibiotics MIPs are summarized including surface imprinting, nanoimprinting, living/controlled radical polymerization, multitemplate imprinting, multifunctional monomer imprinting, and dummy template imprinting. Subsequently, applications of MISPE to analysis of a variety of antibiotics residues since 2018 are overviewed, including sulfonamides, quinolones, tetracycline, and others. Finally, the preparation and application of antibiotics MIPs are prospected.

Abstract Leather making is the process of converting raw hides into leather. Amounts of solid waste containing hazardous and high value components are generated during this process. Therefore, the elimination of the potential pollution and resource utilization of leather solid waste are the primary research hotspots. Herein, we comprehensively review the recent advances in the resource utilization of leather solid waste generated from chrome tanning including the utilization of tannery hair waste, untanned solid waste, chrome-containing leather solid waste, tannery sludge and finished leather waste, emphasizing on the general and novel utilization approaches. Finally, the remaining challenges and perspectives were summarized, in order to accelerate the development of resource utilization of leather solid waste. Graphical abstract

Mechanically enhanced gelatin-based composite hydrogels were developed in the presence of functionalized cellulose nanocrystals (CNCs) employing microbial transglutaminase (mTG) as a binding agent. In this work, the surfaces of CNCs were grafted with (3-Aminopropyl) trimethoxysilane with a NH2 functional group, and the success of CNCs’ modification was verified by FTIR spectroscopy and XPS. The higher degree of modification in CNCs resulted in more covalent cross-linking and dispersibility within the gelatin matrix; thus, the as-prepared hydrogels showed significantly improved mechanical properties and thermo-stability, as revealed by dynamic rheological analysis, uniaxial compression tests and SEM. The biocompatibility of the obtained hydrogels was evaluated by the MTT method, and it was found that the grafted CNCs had no obvious inhibitory effect on cell proliferation. Hence, the mechanically enhanced gelatin-based hydrogels might have great potential in biomedical applications.

In this study, one-dimensional (1D) zinc oxide was loaded on the surface of cobalt oxide microspheres, which were assembled by single-crystalline porous nanosheets, via a simple heteroepitaxial growth process. This elaborate structure possessed an excellent transducer function from the single-crystalline feature of Co3O4 nanosheets and the receptor function from the zinc oxide nanorods. The structure of the as-prepared hybrid was confirmed via a Scanning Electron Microscope (SEM), X-ray diffraction (XRD), and a Transmission Electron Microscope (TEM). Gas-sensing tests showed that the gas-sensing properties of the as-designed hybrid were largely improved. The response was about 161 (Ra/Rg) to 100 ppm ethanol, which is 110 and 10 times higher than that of Co3O4 (Rg/Ra = 1.47) and ZnO (Ra/Rg = 15), respectively. And the as-designed ZnO/Co3O4 hybrid also showed a high selectivity to ethanol. The superior gas-sensing properties were mainly attributed to the as-designed nanostructures that contained a super transducer function and a super receptor function. The design strategy for gas-sensing materials in this work shed a new light on the exploration of high-performance gas sensors.

In this work, hole transport layer (HTL) free bulk heterojunction organic solar cells (BHJ-OSCs) based on PTB7:PCBM as active layer have been fabricated by employing various ITO anodes with different work function. The power conversion efficiency of the BHJ-OSCs is significantly improved from 3.76 to 8.47% with increasing the work function of the ITO anode. By combining Mott–Schottky curves, external quantum efficiency and reflectance spectra of the BHJ-OSCs, we identify that the improved optoelectronic conversion due to the enhanced built-in electric field within the active layer which is induced by the high work function ITO anodes. The hole transport layer free device structure can be considered for the fabrication of cost-effective BHJ-OSCs due to their simple structure and high efficiency.

The triple helix structure of collagen can be degraded by collagenase. In this study, we explored how the intrinsic fluorescence of type I collagen was influenced by collagenase I. We found that tyrosine was the main factor that could successfully excite the collagen fluorescence. Initially, self-assembly behavior of collagen resulted in a large amount of tyrosine wrapped with collagen, which decreased the fluorescence intensity of type I collagen. After collagenase cleavage, some wrapped-tyrosine could be exposed and thereby the intrinsic fluorescence intensity of collagen increased. By observation and analysis, the influence of collagenase to intrinsic fluorescence of collagen was investigated and elaborated. Furthermore, collagenase cleavage to the special triple helix structure of collagen would result in a slight improvement of collagen thermostability, which was explained by the increasing amount of terminal peptides. These results are helpful and effective for reaction mechanism research related to collagen, which can be observed by fluorescent technology. Meantime, the reaction behaviors of both collagenase and collagenolytic proteases can also be analyzed by fluorescent technology. In conclusion, this research provides a foundation for the further investigation of collagen reactions in different areas, such as medicine, nutrition, food and agriculture.

A porcine reproductive and respiratory syndrome virus (PRRSV) QY1 was serially passed on Marc-145 cells. Virulence of different intermediate derivatives of QY1 (P5, P60, P80, and P100) were determined. The study found that QY1 had been gradually attenuated during the in vitro process. Pathogenicity study showed that pigs inoculated with QY1 P100 and P80 did not develop any significant PRRS clinic symptoms. However, mild-to-moderate clinical signs and acute HP-PRRSV symptoms of infection were observed in pigs inoculated with QY1 P60 and P5, respectively. Furthermore, we determined the whole genome sequences of these four intermediate viruses. The results showed that after 100 passages, compared to QY1 P5, a total of 32 amino acid mutations were found. Moreover, there were one nucleotide deletion and a unique 34-amino acid deletion found at 5′UTR and in nsp2 gene during the attenuation process, respectively. Such deletions were genetically stable in vivo. Following PRRSV experimental challenge, pigs inoculated with a single dose of QY1 P100 developed no significant clinic symptoms and well tolerated lethal challenge, while QY1 P80 group still developed mild fever in the clinic trial after challenge. Thus, we concluded that QY1 P100 was a promising and highly attenuated PRRSV vaccine candidate.

Homogenous advanced oxidation processes (AOPs) based on transition metal catalysts toward the activation of H2O2 to hydroxyl radical (•OH) have been widely applied to organic pollutants removal, such as Fenton and Fenton-like processes. These transition metal catalysts mostly flocculate as the pH increases. It's worth noting that the formed transition metal flocs are complex heterogeneous aggregations with active substances, providing diverse reaction spaces and interfaces. However, it is a challenge to distinguish the roles of transition metal flocs in the organic pollutants removal from homogeneous catalytic reactions. Herein, we unveiled a pathway for the long-lasting removal of organic pollutants via Cr flocs adsorbed with •OH (HO•-Cr flocs) using a stepwise method. First, adsorbed •OH (•OHads) within the HO•-Cr flocs was proved to be the active site forming hydrogen bond (H-bond) and van der Waals force with organic pollutants. Then, the presence of switchable electron transfer between Cr and OH groups within the HO•-Cr flocs was revealed, contributing to the persistent existence of •OHads and consequently ensuring the long-lasting organics removal. Further, this removal pathway of organic pollutants was confirmed during the leather wastewater treatment. These findings will complement a different pathway for organic pollutants removal via transition metal flocs and extend the lifetime of homogeneous AOPs based on transition metal catalysts, providing significant implications for their design and optimization. [ABSTRACT FROM AUTHOR]

ObjectiveTaste is one of the vital indicators for the quality evaluation of Coptis rhizome (CR), but the traditional taste evaluation lacks objectivity. By establishing the correlation between CR’s tastes and alkaloids, an objective basis for the taste evaluation was established.MethodsUltra-high performance liquid chromatography tandem triple quadrupole mass spectrometry (UHPLC-QQQ-MS/MS) and electronic tongue technique were performed to determine ten alkaloid contents and eight tastes from Coptis chinensis rhizome, Coptis deltoidea rhizome, Coptis teeta rhizome, and Coptis japonica rhizome, respectively. Combined with multivariate statistical analysis, we established models to discriminate the alkaloid contents and tastes of CR, screened the differential alkaloids and tastes, and performed Pearson’s correlation analysis on the results of alkaloids and tastes.Results1) According to the previous UHPLC-QQQ-MS/MS method established by our research group, the contents of ten alkaloids of the four species of CR were quantified, of which jatrorrhizine, columbamine, and magnoflorine were the differential alkaloids of the four species. 2) The electronic tongue technique realized the objectification of CR’s tastes and distinguished the species of CR based on the tastes of aftertaste-A, sourness, bitterness, and richness. 3) Pearson’s correlation analysis shows the bitterness of CR was mainly manifested as aftertaste-B, indicating the higher the aftertaste-B value, the higher the berberrubine content. Astringency and aftertaste-A could be suggested as quality evaluation indexes of CR, due to the positively correlated or significantly positively correlated with coptisine, epiberberine, berberine, and palmatine, respectively.ConclusionElectronic tongue technique has successfully achieved the objectification of the tastes of CR, and combined with UHPLC-QQQ-MS/MS technique for alkaloid quantification and correlation research, it provides a new idea for the quality evaluation of CR.