Search

Effective cleaning and disinfection procedures are an integral part of good manufacturing practice and in maintaining hygiene standards in health-care facilities. In this study, a method to validate such cleaning and disinfection procedures of surfaces was established employing lipid nanoparticles (LNPs) encapsulating DNA. It was possible to determine and distinguish between the physical cleaning effect (dilution) and the chemical cleaning effect (disintegration) on the LNPs during the cleaning and disinfection procedure (wiping). After treatment with 70 v % ethanol as a disinfectant and SDS solution as a cleaning agent, LNPs showed log10 reductions of 4.5 and 4.0, respectively. These values are similar to the log10 reductions exhibited by common bacteria, such as Escherichia coli and Serratia marcescens. Therefore, LNPs pose as useful tools for cleaning validation with advantages over the already existing tools and enable a separate detection of dilution and chemical disinfectant action., ACS Applied Bio Materials, 6 (3), ISSN:2576-6422

A core-shell strategy was developed to protect synthetic DNA in organosilica particles encompassing dithiol linkages allowing for a DNA loading of 1.1 wt %. DNA stability tests involving bleach as an oxidant showed that following the procedure DNA was sandwiched between core particles of ca. 450 nm size and a protective outer layer, separating the DNA from the environment. Rapid aging tests at 60 °C and 50% relative humidity revealed that the DNA protected within this material was significantly more stable than nonprotected DNA, with an expected ambient temperature half-life of over 60 years. Still, and due to the presence of the dithiol linkages in the backbone of the organosilica material, the particles degraded in the presence of reducing agents (TCEP and glutathione) and disintegrated within several days in a simulated compost environment, which was employed to test the biodegradability of the material. This is in contrast to DNA encapsulated following state of the art procedures in pure SiO

Transition metal carbides have numerous applications and are known to excel in terms of hardness, thermal stability and conductivity. In particular, the Pt-like behavior of Mo and W carbides has led to the popularization of metal carbides in catalysis, ranging from electrochemically-driven reactions to thermal methane coupling. Herein, we show the active participation of carbidic carbon in the formation of C2 products during methane coupling at high temperature that is associated with the dynamics of Mo and W carbides. A detailed mechanistic study reveals that the catalyst performance of these metal carbides can be traced back to its carbon diffusivity and exchange capability upon interaction with methane (gas phase carbon). A stable C2 selectivity over time on stream for Mo carbide (Mo2C) can be rationalized by fast carbon diffusion dynamics, while W carbide (WC) shows loss of selectivity due to slow diffusion leading to surface carbon depletion. This finding showcases that the bulk carbidic carbon of the catalyst plays a crucial role and that the metal carbide is not only responsible for methyl radical formation. Overall, this study evidences the presence of a carbon equivalent to the Mars–Van Krevelen type mechanism for non-oxidative coupling of methane., Chemical Science, 14 (22), ISSN:2041-6520, ISSN:2041-6539

The COVID-19 pandemic simultaneously disrupted supply chains and generated an urgent demand in medical infrastructure. Among personal protective equipment and ventilators, there was also an urgent demand for chemical oxygen. As devices to purify oxygen could not be manufactured and shipped rapidly enough, a simple and accessible oxygen concentrator based on pressure swing adsorption was developed at ETH Zurich in spring 2020. Instead of building devices locally and shipping them, it was decided to educate others in need of oxygen. The implementation encompassed education on process chemistry, material choice, and assembly and optimization of the concentrator and was realized using synchronous teaching tools, such as video call, and asynchronous ones, such as a website and video streaming. The project gained traction and interaction with engineering teams from universities and non-Governmental Organizations (Red Cross and the UN Development Program) in developing countries and emerging market economies, including Ecuador, Mexico, Somalia, and Peru. At the end of the project, the teams were surveyed regarding their experience in the educative knowledge transfer. It was reported that the learning experience prepared these groups well to build the device and to teach others as well. Major challenges were accessing some parts of the device and optimizing its performance. While synchronous communication is expected to be a very effective teaching method, the survey results showed that explanations via a website and video streaming have contributed the most to the implementation of the oxygen concentrator and thereby provide autonomous and sustainable education tools., Journal of Chemical Education, 100 (5), ISSN:0021-9584, ISSN:1938-1328

Environmental tracers are chemical species that move with a fluid and allow us to understand its origin and material transport properties. DNA-based materials have been proposed and used for tracing due to their potential for multitracing with high specificity and sensitivity. For large-scale applications of this new material it is of interest to understand its impact on the environment. We therefore assessed the ecotoxicity of sub-micron silica particles with and without encapsulated DNA in the context of surface and underground tracing of natural waterflows using standard ecotoxicity assays according to ISO standards. Acute toxicity tests were performed with Daphnia magna (48 h), showing no effect on mobility at tracer concentrations below 300 ppm. Chronic ecotoxicological potential was tested with Raphidocelis subcapitata (green algae) (72 h) and Ceriodaphnia species (7 d) with no effect observed at realistic exposure scenario concentrations for both silica particles with and without encapsulated DNA. These results suggest that large-scale environmental tracing with DNA-tagged silica particles in the given exposure scenarios has a low impact on aquatic species with low trophic levels such as select algae and planktonic crustaceans. ISSN:0013-936X ISSN:1520-5851

The resilience of ancient DNA (aDNA) in bone gives rise to the preservation of synthetic DNA with bioinorganic materials such as calcium phosphate (CaP). Accelerated aging experiments at elevated temperature and humidity displayed a positive effect of co-precipitated, crystalline dicalcium phosphate on the stability of synthetic DNA in contrast to amorphous CaP. Quantitative PXRD in combination with SEM and EDX measurements revealed distinct CaP phase transformations of calcium phosphate dihydrate (brushite) to anhydrous dicalcium phosphate (monetite) influencing DNA stability., Chemical Communications, 58 (19), ISSN:1359-7345, ISSN:1364-548X

Industrial & Engineering Chemistry Research, 59 (26), ISSN:1520-5045, ISSN:0888-5885

Today, we can read human genomes and store digital data robustly in synthetic DNA. Here we report a strategy to intertwine these two technologies to enable the secure storage of valuable information in synthetic DNA, protected with personalized keys. We show that genetic short tandem repeats (STRs) contain sufficient entropy to generate strong encryption keys, and that only one technology, DNA sequencing, is required to simultaneously read key and data. Using this approach, we experimentally generated 80 bit strong keys from human DNA, and used such a key to encrypt 17kB of digital information stored in synthetic DNA. Finally, the decrypted information was recovered perfectly from a single massively parallel sequencing run.

Aerosolized particles play a significant role in human health and environmental risk management. The global importance of aerosol-related hazards, such as the circulation of pathogens and high levels of air pollutants, have led to a surging demand for suitable surrogate tracers to investigate the complex dynamics of airborne particles in real-world scenarios. In this study, we propose a novel approach using silica particles with encapsulated DNA (SPED) as a tracing agent for measuring aerosol distribution indoors. In a series of experiments with a portable setup, SPED were successfully aerosolized, recaptured, and quantified using quantitative polymerase chain reaction (qPCR). Position dependency and ventilation effects within a confined space could be shown in a quantitative fashion achieving detection limits below 0.1 ng particles per m(3) of sampled air. In conclusion, SPED show promise for a flexible, cost-effective, and low-impact characterization of aerosol dynamics in a wide range of settings., Indoor Air, 32 (1), ISSN:0905-6947, ISSN:1600-0668

Using DNA as a durable, high-density storage medium with eternal format relevance can address a future data storage deficiency. The proposed storage format incorporates dehydrated particle spots on glass, at a theoretical capacity of more than 20 TB per spot, which can be efficiently retrieved without significant loss of DNA. The authors measure the rapid decay of dried DNA at room temperature and present the synthesis of encapsulated DNA in silica nanoparticles as a possible solution. In this form, the protected DNA can be readily applied to digital microfluidics (DMF) used to handle retrieval operations amenable to full automation. A storage architecture is demonstrated, which can increase the storage capacity of today's archival storage systems by more than three orders of magnitude: A DNA library containing 7373 unique sequences is encapsulated and stored under accelerated aging conditions (4 days at 70 °C, 50% RH) corresponding to 116 years at room temperature and the stored information is successfully recovered., Small, 18 (15), ISSN:1613-6810, ISSN:1613-6829

The need for tools that facilitate rapid detection and continuous monitoring of SARS-CoV-2 variants of concern (VOCs) is greater than ever, as these variants are more transmissible and therefore increase the pressure of COVID-19 on healthcare systems. To address this demand, we aimed at developing and evaluating a robust and fast diagnostic approach for the identification of SARS-CoV-2 VOC-associated spike gene mutations. Our diagnostic assays detect the E484K and N501Y single-nucleotide polymorphisms (SNPs) as well as a spike gene deletion (HV69/70) and can be run on standard laboratory equipment or on the portable rapid diagnostic technology platform peakPCR. The assays achieved excellent diagnostic performance when tested with RNA extracted from culture-derived SARS-CoV-2 VOC lineages and clinical samples collected in Equatorial Guinea, Central-West Africa. Simplicity of usage and the relatively low cost are advantages that make our approach well suitable for decentralized and rapid testing, especially in resource-limited settings., Analytical Chemistry, 93 (49), ISSN:1520-6882, ISSN:0003-2700

The need for tools that facilitate rapid detection and continuous monitoring of SARS-CoV-2 variants of concern (VOCs) is greater than ever, as these variants are more transmissible and therefore increase the pressure of COVID-19 on healthcare systems. To address this demand, we aimed at developing and evaluating a robust and fast diagnostic approach for the identification of SARS-CoV-2 VOC-associated spike gene mutations. Our diagnostic assays detect the E484K and N501Y single-nucleotide polymorphisms (SNPs) as well as a spike gene deletion (HV69/70) and can be run on standard laboratory equipment or on the portable rapid diagnostic technology platform peakPCR. The assays achieved excellent diagnostic performance when tested with RNA extracted from culture-derived SARS-CoV-2 VOC lineages and clinical samples collected in Equatorial Guinea, Central-West Africa. Simplicity of usage and the relatively low cost are advantages that make our approach well suitable for decentralized and rapid testing, especially in resource-limited settings.

Amorphous calcium phosphate (aCaP) nanoparticles may trigger the osteogenic commitment of adipose-derived stem cells (ASCs) in vitro. The ASCs of three human donors are investigated using basal culture medium DMEM to either 5 or 50 µg/mL aCaP nanoparticles suspension (control: no nanoparticles). After 7 or 14 days, stem cell marker genes, as well as endothelial, osteogenic, chondrogenic, and adipogenic genes, are analyzed by qPCR. Free calcium and phosphate ion concentrations are assessed in the cell culture supernatant. After one week and 5 µg/mL aCaP, downregulation of osteogenic markers ALP and Runx2 is found, and averaged across the three donors. Our results show that after two weeks, ALP is further downregulated, but Runx2 is upregulated. Endothelial cell marker genes, such as CD31 and CD34, are upregulated with 50 µg/mL aCaP and a 2-week exposure. Inter-donor variability is high: Two out of three donors show a significant upregulation of ALP and Runx2 at day 14 with 50 µg/mL aCaP compared to 5 µg/mL aCaP. Notably, all changes in stem cell commitment are obtained in the absence of an osteogenic medium. While the chemical composition of the culture medium and the saturation status towards calcium phosphate phases remain approximately the same for all conditions, gene expression of ASCs changes considerably. Hence, aCaP nanoparticles show the potential to trigger osteogenic and endothelial commitment in ASCs., Biology, 10 (7), ISSN:2079-7737

Because of its longevity and enormous information density, DNA is considered a promising data storage medium. In this work, we provide instructions for archiving digital information in the form of DNA and for subsequently retrieving it from the DNA. In principle, information can be represented in DNA by simply mapping the digital information to DNA and synthesizing it. However, imperfections in synthesis, sequencing, storage and handling of the DNA induce errors within the molecules, making error-free information storage challenging. The procedure discussed here enables error-free storage by protecting the information using error-correcting codes. Specifically, in this protocol, we provide the technical details and precise instructions for translating digital information to DNA sequences, physically handling the biomolecules, storing them and subsequently re-obtaining the information by sequencing the DNA. Along with the protocol, we provide computer code that automatically encodes digital information to DNA sequences and decodes the information back from DNA to a digital file. The required software is provided on a Github repository. The protocol relies on commercial DNA synthesis and DNA sequencing via Illumina dye sequencing, and requires 1-2 h of preparation time, 1/2 d for sequencing preparation and 2-4 h for data analysis. This protocol focuses on storage scales of ~100 kB to 15 MB, offering an ideal starting point for small experiments. It can be augmented to enable higher data volumes and random access to the data and also allows for future sequencing and synthesis technologies, by changing the parameters of the encoder/decoder to account for the corresponding error rates.

For many manufacturing processes, correct mixing compositions are crucial to guarantee product quality. However, the analysis of mixing ratios based on component balances can be challenging and requires extensive infrastructure. DNA barcodes have been previously proposed as low-cost markers for product authenticity, and we show here that the quantification of such barcodes via a quantitative real-time polymerase chain reaction (PCR) enables the determination of mixing ratios in a range of liquid and polymeric products. To enable the distribution of the DNA within the various matrixes, the biochemical is encapsulated in silica nanoparticles and distributed within the matrix of the raw material. If both raw materials of a two-component mixture contain such barcodes, the composition of the mixture can be determined from the relative concentration of the barcodes via multiplex PCR reactions, irrespective of the sampling volume and for a wide range of initial barcode concentrations (10 ppm to 10 ppb). As an application example, we use the barcodes to determine the mixing ratios of cross-linked and multicomponent polysilicon products.

This review summarizes the development of whole-cell biosensors with a special focus on device development and cell immobilization. Integration of biosensor functions in a device will pave the way for field applications in remote areas and resource-limited settings. Firstly, an introduction to the field of whole-cell biosensors is provided, followed by examples of genetic engineering of cells in order to fulfill sensor functions. A framework of requirements to enable future field applications of biosensors is elaborated. A special focus is on different cell immobilization techniques ranging from polymers, to microfluidic devices, immobilization on paper and combinations of these methods. Looking at globally successfully implemented point of care devices such as a home pregnancy test or a blood glucose meter, we conclude the review with thoughts on long-term stability, portability, ease of use and user safety design guidelines for whole-cell biosensor devices.

We report improvements on the heat transfer and on the control strategy of a thermal cycler implemented on a novel device for performing a fast polymerase chain reaction (PCR). The reduction of the thermal mass of the sample holder and the direct contact with the sample allow for a significant reduction of the transition times, while the hybrid feedforward/feedback controller can rely on inexpensive components (actuators, sensors, processor) and still achieve minimal over/undershooting and good temperature stability. The design of the device has been improved by performing transient heat conduction analysis on the highly heat-conductive sample holder and on the solid metal body of the device which rapidly dissipates the excess heat produced during the thermal cycling. In the current setup, the sample holder hosts nine 1 μL samples covered with mineral oil, which can be simultaneously read in real time by the detection module designed in-house and installed on the device. An increase in speed of the PCR amplification was achieved with a reduction of the transition time of 63.8% when compared against a commercial real-time PCR machine. Our work shows that a complete, stand-alone, and ready-to-use quantitative PCR instrument can be fabricated from inexpensive and easily available components and it can achieve fast thermal cycling thanks to a hybrid control strategy.

We present a long-term performance study on a pneumatically actuated soft pump (SP). The pump was manufactured by adapting rubber compression technology. Important parameters influencing pump performance (e.g., inflation and deflation times and fluid outlet pressures) were studied. Based on design improvement and material selection, SP durability could be enhanced for over 1 million actuation cycles. This resulted in conveyance of more than 140,000 L of water in less than 12 days. In a next step, we analyzed our SP on a hybrid mock circulation and achieved 1.8 L/min against 10 kPa (75 mmHg).

Electronic systems with on-demand dissolution or destruction capabilities offer unusual opportunities in hardware-oriented security devices, advanced military spying and controlled biological treatment. Here, the dissolution chemistry of gold, generally known as inert metal, in potassium ferricyanide and potassium ferrocyanide solutions has been investigated upon light exposure. While a pure aqueous solution of potassium ferricyanide–K3[Fe(CN)6] does not dissolve gold, an aqueous solution of potassium ferrocyanide–K4[Fe(CN)6] irradiated with ambient light is able to completely dissolve a gold electrode within several minutes. Photo activation and dissolution kinetics were assessed at different initial pH values, light irradiation intensities and ferrocyanide concentrations. Addition of small amounts of the heavy metal thallium (260 ppb) also provides tunability of the dissolution kinetics. An investigation of the involved chemical and physical processes of photochemistry, cyanide diffusion and surface reaction results in an understanding of the rate limiting steps and yields an overall transformation of irradiated light energy to dissolved gold of 2.6%. A potential application of this novel gold dissolution method as a cumulative light sensor is demonstrated and discussed.

A simple synthesis of fluorescent carbon quantum dots from lemon juice is described to introduce advanced high-school students and undergraduate college students to nanoparticle synthesis and quantum dots. The synthesis is based on the carbonization of lemon juice using only a hot plate stirrer. Column chromatography is used to separate different carbon quantum dots according to their size. This laboratory experiment can be carried out within a 2 h laboratory course and introduces the students to (1) nanotechnology and nanoparticle synthesis, using safe and commonly available chemicals. Furthermore, (2) the concept of fluorescence can be visualized in an intriguing manner using a pocket UV lamp. (3) This experiment serves as an introduction into size-exclusion chromatography. (4) An insight into possible sensing applications is given by the specific fluorescence quenching with an iron(III) solution. The experiment has been tested with 80 students in 4 Swiss high schools, and the knowledge of the students ...

Future left ventricular assist devices (LVADs) are expected to respond to the physiologic need of patients; however, they still lack reliable pressure or volume sensors for feedback control. In the clinic, echocardiography systems are routinely used to measure left ventricular (LV) volume. Until now, echocardiography in this form was never integrated in LVADs due to its computational complexity. The aim of this study was to demonstrate the applicability of a simplified ultrasonic sensor to fit an LVAD cannula and to show the achievable accuracy in vitro. Our approach requires only two ultrasonic transducers because we estimated the LV volume with the LV end-diastolic diameter commonly used in clinical assessments. In order to optimize the accuracy, we assessed the optimal design parameters considering over 50 orientations of the two ultrasonic transducers. A test bench was equipped with five talcum-infused silicone heart phantoms, in which the intra-ventricular surface replicated papillary muscles and trabeculae carnae. The end-diastolic LV filling volumes of the five heart phantoms ranged from 180 to 480 mL. This reference volume was altered by ±40 mL with a syringe pump. Based on the calibrated measurements acquired by the two ultrasonic transducers, the LV volume was estimated well. However, the accuracies obtained are strongly dependent on the choice of the design parameters. Orientations toward the septum perform better, as they interfere less with the papillary muscles. The optimized design is valid for all hearts. Considering this, the Bland-Altman analysis reports the LV volume accuracy as a bias of ±10% and limits of agreement of 0%-40% in all but the smallest heart. The simplicity of traditional echocardiography systems was reduced by two orders of magnitude in technical complexity, while achieving a comparable accuracy to 2D echocardiography requiring a calibration of absolute volume only. Hence, our approach exploits the established benefits of echocardiography and makes them applicable as an LV volume sensor for LVADs.

The need for tools which allow rapid detection and continuous monitoring of Sars-CoV-2 variants of concern (VOC) is greater than ever, as these variants are more transmissible and therefore increase the pressure of COVID-19 on healthcare systems. To address this demand, we aimed to develop and evaluate a robust and fast diagnostic approach for identification of Sars-CoV-2 VOC-associated spike gene mutations. Our diagnostic assays detect the E484K and N501Y SNPs as well as a spike gene deletion (HV69/70) and can be run on standard laboratory equipment or on the portable rapid diagnostic technology platform peakPCR. The assays achieved excellent diagnostic performance when tested with RNA extracted from culture-derived Sars-CoV-2 VOC lineages. Simplicity of usage and the relatively low costs are advantages which make our approach well-suited for decentralized and rapid testing, especially in resource limited settings.

The volume of securely encrypted data transmission required by today’s network complexity of people, transactions and interactions increases continuously. To guarantee security of encryption and decryption schemes for exchanging sensitive information, large volumes of true random numbers are required. Here we present a method to exploit the stochastic nature of chemistry by synthesizing DNA strands composed of random nucleotides. We compare three commercial random DNA syntheses giving a measure for robustness and synthesis distribution of nucleotides and show that using DNA for random number generation, we can obtain 7 million GB of randomness from one synthesis run, which can be read out using state-of-the-art sequencing technologies at rates of ca. 300 kB/s. Using the von Neumann algorithm for data compression, we remove bias introduced from human or technological sources and assess randomness using NIST’s statistical test suite., Nature Communications, 11 (1), ISSN:2041-1723

Due to its longevity and enormous information density, DNA is an attractive medium for archival storage. The current hamstring of DNA data storage systems—both in cost and speed—is synthesis. The key idea for breaking this bottleneck pursued in this work is to move beyond the low-error and expensive synthesis employed almost exclusively in today’s systems, towards cheaper, potentially faster, but high-error synthesis technologies. Here, we demonstrate a DNA storage system that relies on massively parallel light-directed synthesis, which is considerably cheaper than conventional solid-phase synthesis. However, this technology has a high sequence error rate when optimized for speed. We demonstrate that even in this high-error regime, reliable storage of information is possible, by developing a pipeline of algorithms for encoding and reconstruction of the information. In our experiments, we store a file containing sheet music of Mozart, and show perfect data recovery from low synthesis fidelity DNA., Nature Communications, 11 (1), ISSN:2041-1723

The functionalization of magnetic nanoparticles has been an important field in the last decade due to the versatile applications in catalysis and biomedicine. Generally, a high degree of functionalities on the surface of the nanoparticles is desired. In this study, covalent functionalization of various aromatic sulfonic acids on carbon-coated cobalt nanoparticles are investigated on surface functionalization yield and stability. The nanoparticles are prepared via covalent linkage of an in situ generated diazonium on the graphene-like surface. Adsorption and wash experiments were performed to confirm a covalent bonding of the naphthalene derivatives on the nanoparticle surface. With an increased number of sulfonic acid groups on the aromatic compound a significantly lower loading is observed on the corresponding functionalized nanoparticles. This can be counteracted by a change of nitrite species. With this method, nanoparticles with a high number of sulfonic acid groups can be produced.

Low-density lipoprotein (LDL)-mimetic lipid nanoparticles (LNPs), decorated with MRI contrast agents and fluorescent dyes, were prepared by the covalent attachment of apolipoprotein-mimetic peptide (P), Gd(iii)-chelate (Gd), and sulforhodamine B (R) moieties on the LNP surface. The functionalized LNPs were prepared using the amide-forming potassium acyltrifluoroborate (KAT) ligation reaction. The KAT groups on the surface of LNPs were allowed to react with the corresponding hydroxylamine (HA) derivatives of P and Gd to provide bi-functionalized LNPs (PGd-LNP). The reaction proceeded with excellent yields, as observed by ICP-MS (for B and Gd amounts) and MALDI-TOF-MS data, and did not alter the morphology of the LNPs (mean diameter: ca. 50 nm), as shown by DLS and cryoTEM analyses. With the help of the efficient KAT ligation, a high payload of Gd(iii)-chelate on the PGd-LNP surface (ca. 2800 Gd atoms per LNP) was successfully achieved and provided a high r1 relaxivity (r1 = 22.0 s−1 mM−1 at 1.4 T/60 MHz and 25 °C; r1 = 8.2 s−1 mM−1 at 9.4 T/400 MHz and 37 °C). This bi-functionalized PGd-LNP was administered to three atherosclerotic apoE−/− mice to reveal the clear enhancement of atherosclerotic plaques in the brachiocephalic artery (BA) by MRI, in good agreement with the high accumulation of Gd in the aortic arch as shown by ICP-MS. The parallel in vivo MRI and ex vivo studies of whole mouse cryo-imaging were performed using triply functionalized LNPs with P, Gd, and R (PGdR-LNP). The clear presence of atherosclerotic plaques in BA was observed by ex vivo bright field cryo-imaging, and they were also observed by high emission fluorescent imaging. These directly corresponded to the enhanced tissue in the in vivo MRI of the identical mouse., LDL-mimetic lipid nanoparticles, decorated with MRI contrast agents and fluorescent dyes, were prepared by the covalent attachments of an apoB100-mimetic peptide, Gd(iii)-chelate, and rhodamine to enhance atherosclerosis in the in vivo imaging.

In this work, we present an injection molded soft total artificial heart (sTAH) produced from high-temperature vulcanizing silicone using an industrial metal injection mold. At 60 beats per minute, the sTAH exhibited a total cardiac output of over 16 L/min against physiological pressures on a mock circulation and was pumped continuously for 110,000 actuation cycles. Finite element analysis was used to identify stress concentrations within the sTAH, allowing an optimized design to be proposed.

ObjectivesThe SARS-CoV-2 pandemic outbreak has stressed health care systems as well as medical supply chains, but diagnostic testing is an essential public health measure to control viral spread. Here we test the suitability of different RNA extraction methods for integration into a diagnostic workflow for coronavirus testing.MethodsWe applied six RNA extraction methods on the same 24 SARS-CoV-2 positive patient samples and quantified their results by subsequent reverse-transcriptase PCR (RT-PCR) of three viral genes. These methods included a) column-based extraction, b) phenol-chloroform extraction, as well as c) extraction using magnetic beads (i.e., one commercial kit as well as three different magnetic beads in combination with home-brewed buffers and solutions).ResultsWe achieved diagnostic-quality RT-PCR results with all methods, and there was no significant difference between the tested methods, except for one magnetic bead protocol with home-brewed buffers, in which the number of positive tested genes was significantly lower.ConclusionsFive of the six RNA extraction methods are interchangeable in a diagnostic workflow. Since some methods are more scalable than others, and have comparable results on RT-PCR quantitation, they may be more amenable to high-throughput sample processing pipelines.Graphical abstract

Gold nanoparticles (AuNPs) are often used for biosensing. In particular, aptamer-modified AuNPs are often used for colorimetric molecular detection, where target molecule-induced AuNP aggregates can be recognized by a color change from red to blue. However, non-specific aggregation could be induced by various compounds, leading to false-positive results. In this work we employed high-density ssDNA modification on the AuNP surface to prevent non-specific aggregation. The covalently immobilized DNA brush was used as an anchor for an aptamer specific for the target molecule. Herein, as a proof-of-concept study, we demonstrated detection of estradiol (E2), one of the endocrine-disrupting estrogen molecules as a model target, in the presence of antibiotic kanamycin (KN) as a model of co-contaminating compounds that induce non-specific aggregation of AuNPs. We also developed a smartphone dark field microscope (DFM) to visualize AuNP aggregation. Our previous study demonstrated that the observation of light scattering by AuNP aggregates with DFM can be applied for versatile molecular detection. In this work, we could successfully detect E2 with the smartphone DFM, and the results were verified by the results from a conventional benchtop DFM. This study would contribute to the future field applicability of AuNP-based sensors.