Search

Increasing concerns about hair loss affect people’s quality of life. Recent studies have found that sympathetic nerves play a positive role in regulating hair follicle stem cell activity to promote hair growth. However, no study has investigated sympathetic innervation of transplanted follicles. Rat vibrissa follicles were extracted and implanted under the dorsal skin of BALB/c-nu/nu mice using one of two types of follicles: (1) intact follicles, where transplants included bulbs, and (2) upper follicles, where transplants excluded bulbs. Follicular samples were collected for hematoxylin and eosin staining, immunofluorescence staining for tyrosine hydroxylase (TH, a sympathetic marker) and enzyme-linked immunosorbent assays. At 37 days after implantation in both groups, follicles had entered anagen, with the growth of long hair shafts; tyrosine-hydroxylase-positive nerves were innervating follicles (1.45-fold); and norepinephrine concentrations (2.03-fold) were significantly increased compared to 5 days, but did not return to normal. We demonstrate the survival of intact and upper follicle xenografts and the partial restoration of sympathetic reinnervations of both transplanted follicles.

Electrochemical nitrogen reduction reaction (NRR) for ammonia synthesis has attracted great interest in recent years, which presents a carbon‐free alternative to the energy‐intensive Haber–Bosch process. Besides, NRR also provides a promising coverage route of renewable energy since NH3 is considered the second generation of hydrogen energy while possessing established technologies of liquefaction, storage, and transport. However, there are long‐term challenges in catalyst design for NRR due to its low intrinsic activity and unsatisfied selectivity. Fortunately, by conducting extensive explorations in this field, much progress is achieved in boosting the NRR performance. Herein, from a view of the atomic/electronic level, three promotion effects are summarized for NRR (i.e., electron effect, geometry effect, and ligand effect), which tackle the challenges of activity and selectivity. Representative studies with taking fully advantages of the promotion effects are reviewed, which realized remarkable NRR performance. Finally, the future research directions and prospects are discussed. It is highly expected that this review will enable the advancement of NRR catalysts and promote the further development of electrochemical NRR. [ABSTRACT FROM AUTHOR]

Methane, the simplest hydrocarbon, has a high energy density and is widely used as chemical feedstocks or fuels. Converting CO2 to methane through electrochemical reduction offers a promising strategy for managing the global carbon balance, but is a challenge due to the lack of effective electrocatalysts. Herein, the Co single atom catalyst supported by MoS2 antisite defect (Co‐MoS2) is designed from both the activity and selectivity aspects. By virtue of i) moderately electron‐deficient state (Coδ+) ensuring efficient CO2 activation and HER suppression; ii) the strong adsorption capability for intermediate enhancing selectivity; iii) the single atomic active site avoiding the formation of C2 products, Co‐MoS2 could selectively convert CO2 to CH4 with a limiting potential of −0.45 V vs. RHE, which outperforms most of the present catalysts, and is expected to be a promising substitution for Cu‐based catalysts. [ABSTRACT FROM AUTHOR]

We determined the prevalence and molecular characteristics of blaCTX-M-55-positive Escherichia coli (E. coli) isolated from duck–fish polyculture farms in Guangzhou, China. A total of 914 E. coli strains were isolated from 2008 duck and environmental samples (water, soil and plants) collected from four duck fish polyculture farms between 2017 and 2019. Among them, 196 strains were CTX-M-1G-positive strains by PCR, and 177 (90%) blaCTX-M-1G-producing strains were blaCTX-M-55-positive. MIC results showed that the 177 blaCTX-M-55-positive strains were highly resistant to ciprofloxacin, ceftiofur and florfenicol, with antibiotic resistance rates above 95%. Among the 177 strains, 37 strains carrying the F18:A-:B1 plasmid and 10 strains carrying the F33:A-:B- plasmid were selected for further study. Pulse field gel electrophoresis (PFGE) combined with S1-PFGE, Southern hybridization and whole-genome sequencing (WGS) analysis showed that both horizontal transfer and clonal spread contributed to dissemination of the blaCTX-M-55 gene among the E. coli. blaCTX-M-55 was located on different F18:A-:B1 plasmids with sizes between ~76 and ~173 kb. In addition, the presence of blaCTX-M-55 with other resistance genes (e.g., tetA, floR, fosA3, blaTEM, aadA5 CmlA and InuF) on the same F18:A-:B1 plasmid may result in co-selection of resistance determinants and accelerate the dissemination of blaCTX-M-55 in E. coli. In summary, the F18:A-:B1 plasmid may play an important role in the transmission of blaCTX-M-55 in E. coli, and the continuous monitoring of the prevalence and transmission mechanism of blaCTX-M-55 in duck–fish polyculture farms remains important.

Colloidal gold immunochromatographic assay (CGIA) is commonly used for the on-site detection of β-agonists that are sometimes used illegally as feed additives in swine diets. However, few studies have evaluated the causes of false-positive results that sometimes occur when applying CGIA in agricultural settings. In this study, we investigated if this false-positive phenomenon is related to the addition of certain traditional Chinese medicines (TCMs) to swine feed. We established and verified an extraction method for TCMs, and then applied CGIA to detect β-agonists in the extracts of 105 TCMs and in the urine of swine dosed with TCMs, respectively. Liquid chromatography-tandem mass spectrometry was used to validate the results of the urine samples tested positive for β-agonists using CGIA. The results were also verified using TCMs and colloidal gold test strips produced by different manufacturers. The extracts of Citri Reticulatae Pericarpium Viride, Citri Reticulatae Pericarpium, Magnoliae Officinalis Cortex, Chaenomelis Fructus, and Rhodiolae Crenulatae Radix Et Rhizoma were tested positive for β-agonists. Meanwhile, the addition of Citri Reticulatae Pericarpium Viride and Citri Reticulatae Pericarpium to swine feed resulted in false-positive results for β-agonists in swine urine. The results provide a new way to explain false-positive CGIA results and provide valuable information for livestock feeding programs.

Lead-free Cs3Bi2I9 single crystals have been demonstrated to be promising materials for direct X-ray detectors with remarkable performance. However, their application for 2D X-ray imaging is hindered by their time-consuming preparation and limited crystal size. In this paper, a thick Cs3Bi2I9 perovskite film fabricated via facile spray coating at a low processing temperature, which increases the area of the photoactive film, reduces the processing time, decreases the energy budget and the production cost, and enhances the production yield due to high material utilization, has great potential for commercial applications. Careful control of the processing temperature and intervals during spray coating results in a dense and thick perovskite film with well-stacked perovskite domains. The compact perovskite film enhances the charge transport capability of the Cs3Bi2I9 perovskite film and reduces the dark current density of the X-ray detector. The resultant X-ray detector, prepared through a two-step spray coating process, exhibited a sensitivity of 127.23 μC Gyair−1 cm−2 and a detection limit of 7.4 μGyair s−1. In addition, the device delivers long-term stability with a consistent photoresponse when exposed to consecutive X-ray pulse irradiation. A two-step spray coating process (first step: 20 cycles of spray coating at 110 °C with 40 s intervals; second step: 180 cycles of spray coating at 130 °C with 20 s intervals) was employed to a produce large-area, compact, and thick Cs3Bi2I9 perovskite film for the application of direct X-ray detectors. The fabricated device achieved a large active area of 150 mm2, a sensitivity of 127.23 μC Gyair−1 cm−2, a detection limit of 7.4 μGyairs−1, and durability after long-term X-ray pulse irradiation. [ABSTRACT FROM AUTHOR]

The mineral zircon has a robust crystal structure, preserving a wealth of geological information through deep time. Traditionally, trace elements in magmatic and hydrothermal zircon have been employed to distinguish between different primary igneous or metallogenic growth fluids. However, classical approaches based on mineral geochemistry are not only time consuming but often ambiguous due to apparent compositional overlap for different growth environments. Here, we report a compilation of 11 004 zircon trace element measurements from 280 published articles, 7173 from crystals in igneous rocks, and 3831 from ore deposits. Geochemical variables include Hf, Th, U, Y, Ti, Nb, Ta, and the REEs. Igneous rock types include kimberlite, carbonatite, gabbro, basalt, andesite, diorite, granodiorite, dacite, granite, rhyolite, and pegmatite. Ore types include porphyry Cu-Au-Mo, skarntype polymetallic, intrusion-related Au, skarn-type Fe-Cu, and Nb-Ta deposits. We develop Decision Tree, XGBoost, and Random Forest algorithms with this zircon geochemical information to predict lithology or deposit type. The F1-score indicates that the Random Forest algorithm has the best predictive performance for the classification of both lithology and deposit type. The eight most important zircon elements from the igneous rock (Hf, Nb, Ta, Th, U, Eu, Ti, Lu) and ore deposit (Y, Eu, Hf, U, Ce, Ti, Th, Lu) classification models, yielded reliable F1-scores of 0.919 and 0.891, respectively. We present a web page portal (http://60.205.170.161:8001/) for the classifier and employ it to a case study of Archean igneous rocks in Western Australia and ore deposits in Southwest China. The machine learning classifier successfully determines the known primary lithology of the samples, demonstrating significant promise as a classification tool where host rock and ore deposit types are unknown. [ABSTRACT FROM AUTHOR]