Search

The use of DEHP (diethylhexyl phthalate) is now banned for most applications in Europe; the exception is for blood bags, where its toxicity is overshadowed by its ability to extend the storage life of red blood cells. Another plasticiser, BTHC (butanoyl trihexyl citrate), is used in paediatric blood bags but does not stabilise blood cells as effectively. Interactions between plasticisers and lipids are investigated with a phospholipid, DMPC, to understand the increased stability of blood cells in the presence of DEHP as well as bioaccumulation and identify differences with BTHC. Mixed monolayers of DMPC and DEHP or BTHC were studied on Langmuir troughs where surface pressure/area isotherms can be measured. Neutron reflection measurements were made to determine the composition and structure of these mixed layers. A large amount of plasticiser can be incorporated into a DMPC monolayer but once an upper limit is reached, plasticiser is selectively removed from the interface at high surface pressures. The upper limit is found to occur between 40-60 mol% for DEHP and 20-40 mol% for BTHC. The areas per molecule are also different with DEHP being in the range of 50-100 Å 2 and BTHC being 65-120 Å 2 . Results indicate that BTHC does not fit as well as DEHP in DMPC monolayers which could help explain the differences observed with regards to the stability of blood cells.

Hypothesis: Among other functions, mucins hydrate and protect biological interfaces from mechanical challenges. Mucins also attract interest as biocompatible coatings with excellent lubrication performance. Therefore, it is of high interest to understand the structural response of mucin films to mechanical challenges. We hypothesized that this could be done with Neutron Reflectometry using a novel sample environment where mechanical confinement is achieved by inflating a membrane against the films., Experiments: Oral MUC5B mucin films were investigated by Force Microscopy/Spectroscopy and Neutron Reflectometry both at solid-liquid interfaces and under mechanical confinement., Findings: NR indicated that MUC5B films were almost completely compressed and dehydrated when confined at 1 bar. This was supported by Force Microscopy/Spectroscopy investigations. Force Spectroscopy also indicated that MUC5B films could withstand mechanical confinement by means of steric interactions for pressures lower than ∼ 0.5 bar i.e., mucins could protect interfaces from mechanical challenges of this magnitude while keeping them hydrated. To investigate mucin films under these pressures by means of the employed sample environment for NR, further technological developments are needed. The most critical would be identifying or developing more flexible membranes that would still meet certain requirements like chemical homogeneity and very low roughness., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Author(s). Published by Elsevier Inc. All rights reserved.)

Hypothesis: Neutral amphiphilic PEG-g-PVAc co-polymer (a "tardigrade" polymer consisting of a hydrophilic polyethylene glycol, PEG, backbone with hydrophobic polyvinyl acetate, PVAc, grafts) can form complexes at the air-water interface with cationic dodecyltrimethylammonium bromide (DTAB) via self-assembly. Compared to anionic SDS, cationic DTAB headgroups are expected to interact strongly with the negatively charged OH - groups from the partial dissociation of the PVAc grafts. We anticipate a transition from synergistic to competitive behaviour, which is expected to be dependent on the surfactant structural characteristics and concentration., Experiments: DTAB/PEG-g-PVAc mixtures were investigated using a combination of dynamic and equilibrium surface tension measurements, neutron reflectivity (NR) at the air-water interface, and foaming tests. We varied the concentrations of both the DTAB (0.05 to 5 critical micelle concentration, cmc) and that of PEG-g-PVAc (0.2 and 2 critical aggregation concentration, cac)., Findings: Our results show that the interfacial interactions between DTAB and PEG-g-PVAc were both synergistic and antagonistic, depending sensitively on the surfactant concentration. At DTAB concentrations below its cmc, a pronounced cooperative adsorption behaviour was likely driven by the hydrophobic interactions between the DTAB tail and the PVAc grafts and the attraction between the DTAB headgroups and the partially dissociated -O - groups in the partially hydrolysed PVAc grafts, forming a mixed layer. This synergistic adsorption behaviour transitioned to a competitive adsorption behaviour at DTAB concentrations above its cmc, leading to polymer-surfactant partition, forming a "hanging" polymer layer underlying a surfactant monolayer at the interface. We postulate that DTAB/PEG-g-PVAc complexation in the bulk contributed to partial depletion of the mixture from the interface. We therefore consider this polymer/surfactant system to be a moderately interacting system at the air-water interface. No discernible differences in the foaming behaviour were observed between the DTAB/PEG-g-PVAc systems and the pure surfactant. Our results suggest that surfactant headgroup characteristics (particularly charges) were crucial in determining the structure and composition of polymer-surfactant complexes at the air-water interface, as well as the foamability and foam stability, whilst the coexistence of the synergistic and competitive adsorption behaviour is attributed to the unique architecture of the tardigrade polymer with amphiphilicity and partial charge, facilitating different surfactant-polymer interactions at different DTAB concentrations., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Removal of organic species from solid surfaces is a crucial process. The use of oppositely charged surfactants provides a potential method for enhanced removal. Neutron reflectometry has been used to investigate the complex behaviour of a pre-adsorbed and tenacious layer of the cationic surfactant didodecyldimethylammonium bromide (DDAB) on a mica surface, during exposure to different organic species in solution. The anionic surfactant sodium dodecylsulfate (SDS) was shown to be able to remove the cationic layer, but only if anionic micelles were present in solution. To facilitate comparison with the behaviour of a non-ionic surfactant, the direct adsorption of pentaethylene glycol monododecyl ether (C 12 E 5 ) to mica was also studied; low surface coverage adsorption was seen at the critical micelle concentration and above. C 12 E 5 was then found not to remove the cationic layer, but did include into the layer to some degree. The presence of cationic surfactant on the mica was however shown to significantly modify the adsorption behaviour of the non-ionic surfactant., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Hypotheses: Bile salts (BS) are biosurfactants released into the small intestine, which play key and contrasting roles in lipid digestion: they adsorb at interfaces and promote the adsorption of digestive enzymes onto fat droplets, while they also remove lipolysis products from that interface, solubilising them into mixed micelles. Small architectural variations on their chemical structure, specifically their bile acid moiety, are hypothesised to underlie these conflicting functionalities, which should be reflected in different aggregation and solubilisation behaviour., Experiments: The micellisation of two BS, sodium taurocholate (NaTC) and sodium taurodeoxycholate (NaTDC), which differ by one hydroxyl group on the bile acid moiety, was assessed by pyrene fluorescence spectroscopy, and the morphology of aggregates formed in the absence and presence of fatty acids (FA) and monoacylglycerols (MAG) - typical lipolysis products - was resolved by small-angle X-ray/neutron scattering (SAXS, SANS) and molecular dynamics simulations. The solubilisation by BS of triacylglycerol-incorporating liposomes - mimicking ingested lipids - was studied by neutron reflectometry and SANS., Findings: Our results demonstrate that BS micelles exhibit an ellipsoidal shape. NaTDC displays a lower critical micellar concentration and forms larger and more spherical aggregates than NaTC. Similar observations were made for BS micelles mixed with FA and MAG. Structural studies with liposomes show that the addition of BS induces their solubilisation into mixed micelles, with NaTDC displaying a higher solubilising capacity., Competing Interests: Declaration of Competing Interest The authors declared that there is no conflict of interest., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Hypothesis: Salivary pellicles i.e., thin films formed upon selective adsorption of saliva, protect oral surfaces against chemical and mechanical insults. Pellicles are also excellent aqueous lubricants. It is generally accepted that reconstituted pellicles have a two-layer structure, where the outer layer is mainly composed of MUC5B mucins. We hypothesized that by comparing the effect of ionic strength on reconstituted pellicles and MUC5B films we could gain further insight into the pellicle structure., Experiments: Salivary pellicles and MUC5B films reconstituted on solid surfaces were investigated at different ionic strengths by Force Spectroscopy, Quartz Crystal Microbalance with Dissipation, Null Ellipsometry and Neutron Reflectometry., Findings: Our results support the two-layer structure for reconstituted salivary pellicles. The outer layer swelled when ionic strength decreased, indicating a weak polyelectrolyte behavior. While initially the MUC5B films exhibited a similar tendency, this was followed by a drastic collapse indicating an interaction between exposed hydrophobic domains. This suggests that mucins in the pellicle outer layer form complexes with other salivary components that prevent this interaction. Lowering ionic strength below physiological values also led to a partial removal of the pellicle inner layer. Overall, our results highlight the importance that the interactions of mucins with other pellicle components play on their structure., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 The Authors. Published by Elsevier Inc. All rights reserved.)

Understanding the structure of polymer/surfactant mixtures at the air-water interface is of fundamental importance and also of relevance to a variety of practical applications. Here, the complexation between a neutral 'tardigrade' comb co-polymer (consisting of a hydrophilic polyethylene glycol backbone with hydrophobic polyvinyl acetate grafts, PEG-g-PVAc) with an anionic surfactant (sodium dodecyl sulfate, SDS) at the air-water interface has been studied. Contrast-matched neutron reflectivity (NR) complemented by surface tension measurements allowed elucidation of the interfacial composition and structure of these mixed systems, as well as providing physical insights into the polymer/surfactant interactions at the air-water interface. For both polymer concentrations studied, below and above its critical aggregation concentration, cac, (0.2 cac and 2 cac, corresponding to 0.0002 wt% or 0.013 mM and 0.002 wt% or 0.13 mM respectively), we observed a synergistic cooperative behaviour at low surfactant concentrations with a 1-2 nm mixed interfacial layer; a competitive adsorption behaviour at higher surfactant concentrations was observed where the polymer was depleted from the air-water interface, with an overall interfacial layer thickness ~1.6 nm independent of the polymer concentration. The weakly associated polymer layer "hanging" proximally to the interface, however, played a role in enhancing foam stability, thus was relevant to the detergency efficacy in such polymer/surfactant mixtures in industrial formulations., (Copyright © 2019 Elsevier Inc. All rights reserved.)

The strong binding of Al 3+ trivalent counterions to the anionic surfactants sodium polyethylene glycol monoalkyl ether sulfate and α-methyl ester sulfonate results in surface multilayer formation at the air-water interface. In contrast the divalent and monovalent counterions Ca 2+ and Na + result only in monolayer adsorption. Competitive counterion adsorption has been extensively studied in the context of surfactant precipitation and re-dissolution, but remains an important feature in understanding this surface ordering and how it can be manipulated. The α-methyl ester sulfonate surfactants are a promising class of anionic surfactants which have much potential for improved performance in many applications, greater tolerance to extreme solvent conditions such as water hardness, biocompatibility and sustainable production. Hence in this study we have used neutron reflectivity to extend previous studies on the surface ordering of the α-methyl ester sulfonate surfactant, sodium tetradecanoic 2-sulfo 1-methyl ester, in the presence of electrolyte to investigate the role of binary mixtures of electrolytes, AlCl 3 /CaCl 2 , and AlCl 3 /MgCl 2. In the mixed electrolytes the evolution of the surface structure, from monolayer to multilayer with increasing AlCl 3 concentration, is observed. It is broadly similar to that reported for the addition of only AlCl 3 . However with increasing CaCl 2 concentration the structural evolution is shifted progressively to higher AlCl 3 concentrations. Similar observations occur for the AlCl 3 /MgCl 2 mixtures. However the presence of the MgCl 2 results in an additional phenomenon; the partial co-adsorption of a more compact lamellar structure which exists until the highest AlCl 3 concentrations. The results demonstrate the importance of the competitive adsorption of different counterions in driving and controlling the formation of surface multilayer structures with anionic surfactants. Furthermore it offers a facile route to the manipulation of these surface structures., (Copyright © 2018 Elsevier Inc. All rights reserved.)

During the formulation of therapeutic monoclonal antibodies (mAbs), nonionic surfactants are commonly added to attenuate structural rearrangement caused by adsorption/desorption at interfaces during processing, shipping, and storage. We examined the adsorption of a mAb (COE-3) at the SiO 2 /water interface in the presence of pentaethylene glycol monododecyl ether (C 12 E 5 ), polysorbate 80 (PS80-20EO), and a polysorbate 80 analogue with seven ethoxylates (PS80-7EO). Spectroscopic ellipsometry was used to follow COE-3 dynamic adsorption, and neutron reflection was used to determine interfacial structure and composition. Neither PS80-20EO nor C 12 E 5 had a notable affinity for COE-3 or the interface under the conditions studied and thus did not prevent COE-3 adsorption. In contrast, PS80-7EO did coadsorb but did not influence the dynamic process or the equilibrated amount of absorbed COE-3. Near equilibration, COE-3 underwent structural rearrangement and PS80-7EO started to bind the COE-3 interfacial layer and subsequently formed a well-defined surfactant bilayer via self-assembly. The resultant interfacial layer comprised an inner mAb layer of about 70 Å thickness and an outer surfactant layer of a further 70 Å, with distinct transitional regions across the mAb-surfactant and surfactant-bulk water boundaries. Once formed, such interfacial layers were very robust and worked to prevent further mAb adsorption, desorption, and structural rearrangement. Such robust interfacial layers could be anticipated to exist for formulated mAbs stored in type II glass vials; further research is required to understand the behavior of these layers for siliconized glass syringes.

The α-methyl ester sulfonate, MES, anionic surfactants are a potentially important class of sustainable surfactants for a wide range of applications. The eutectic-like Kraft point minimum in the C 16 and C 18 -MES mixtures is an important feature of that potential. Understanding their individual adsorption properties and the surface mixing of the eutectic mixtures are key to their wider exploitation. Neutron reflectivity has been used to investigate the adsorption at the air-water interface of the C 16 and C 18 -MES surfactants and the eutectic mixture of C 16 and C 18 -MES, in aqueous solution and in electrolyte. The micelle mixing of the eutectic mixture is investigated using small angle neutron scattering. The adsorption isotherms for C 14 to C 18 -MES are found to scale with their critical micelle concentration value. The surface and micelle compositions of the C 16 and C 18 -MES eutectic mixture differ from the eutectic composition; with compositions in the limit of high concentrations richer in C 16 -MES. The mixing properties are described by the pseudo phase approximation with a repulsive interaction between the two surfactants. The impact of the multivalent ions Al 3+ on the adsorption at the air-water interface results in a transition from monolayer to multilayer adsorption., (Copyright © 2018 Elsevier Inc. All rights reserved.)

The adsorption of the surfactant Aerosol-OT (AOT) at the calcite-water interface has been investigated using batch adsorption isotherms and neutron reflection. The adsorption isotherms showed that NaAOT adsorption followed S-type adsorption behaviour with a maximum surface excess of 2.5 mg m(-2) but the method could not be used for the investigation of Ca(AOT)2 adsorption owing to the changes in the bulk phase behaviour of the solution. The surface excess, determined by neutron reflection at the critical micelle concentration (CMC), was 2.5 mg m(-2) for Ca(AOT)2 and 1.8 mg m(-2) for NaAOT. The time dependence of the NaAOT adsorption suggests a slow conversion from the sodium to the calcium salt of AOT at the calcite-water interface by binding calcium ions released from the slightly soluble calcite. The layer thickness in both cases was 35 Å which indicates adsorption as bilayers or distorted micelles. At higher concentrations of NaAOT (~10× CMC) adsorption of an AOT lamellar phase was evident from Bragg peaks in the specular reflection. To our knowledge, this is the first time that adsorption of a surfactant at the calcite-water interface has been investigated by neutron reflection. The technique provided significant new insight into the adsorption behaviour of AOT which would not have been accessible using traditional techniques., (Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.)