Search

We present a general approach to isolate chemical reaction mechanism as an independently controllable variable across chemically distinct systems. Modern approaches to reduce the computational expense of molecular dynamics simulations often group multiple atoms into a single “coarse-grained” interaction site, which leads to a loss of chemical resolution. In this work we convert this shortcoming into a feature and use identical coarse-grained models to represent molecules that share nonreactive characteristics but react by different mechanisms. As a proof of concept, we use this approach to simulate and investigate distinct, yet similar, trifunctional isocyanurate resin formulations that polymerize by either chain- or step-growth. Because the underlying molecular mechanics of these models are identical, all emergent differences are a function of the reaction mechanism only. We find that the microscopic morphologies resemble related all-atom simulations and that simulated mechanical testing reasonably agrees with experiment.

Silicone elastomers have a broad variety of applications, such as soft robotics, biomedical devices, and structural metamaterials. The extrusion‐based method known as direct ink write (DIW) has enabled the production of additively manufactured silicone structures. However, this method is limited to manufacturing mostly planar or pseudo‐3D structures. Due to the low self‐supporting capabilities of extruded strands for traditional silicone‐based "inks," obtaining tall or overhanging structures, or structures comprised by thin walls is not feasible. Here, a novel Fast Cure silicone‐based ink is demonstrated that enables manufacturing of complex 3D structures. The Fast Cure ink is a two‐part mixture and silicone structures are produced by inline mixing and coextrusion of a part containing a catalyst (part A) and a part containing a crosslinker (part B). By the virtue of crosslinking, the extruded strands rapidly rigidize, increasing their self‐supportive capacity. Hence, structures can be obtained with superior shape retention and previously unobtainable parts are realized that are tall, with aspect ratios higher than 3, and have overhanging features, achieving inclination angles smaller than 35° with respect to the printing plane. These minimal sag parts are achieved without requiring extra curing or mechanisms, support structures, or suspension baths. [ABSTRACT FROM AUTHOR]

Two limitations of additive manufacturing methods that arise from layer-based fabrication are slow speed and geometric constraints (which include poor surface quality). Both limitations are overcome in the work reported here, introducing a new volumetric additive fabrication paradigm that produces photopolymer structures with complex nonperiodic three-dimensional geometries on a time scale of seconds. We implement this approach using holographic patterning of light fields, demonstrate the fabrication of a variety of structures, and study the properties of the light patterns and photosensitive resins required for this fabrication approach. The results indicate that low-absorbing resins containing ~0.1% photoinitiator, illuminated at modest powers (~10 to 100 mW), may be successfully used to build full structures in ~1 to 10 s.

We have developed and field-tested a now operational civilian biodefense capability that continuously monitors the air in high-risk locations for biological threat agents. This stand-alone instrument, called the Autonomous Pathogen Detection System (APDS), collects and selectively concentrates particles from the air into liquid samples and analyzes the samples using multiplexed PCR amplification coupled with microsphere array detection. During laboratory testing, we evaluated the APDS instrument's response to Bacillus anthracis and Yersinia pestis by spiking the liquid sample stream with viable spores and cells, bead-beaten lysates, and purified DNA extracts. APDS results were also compared to a manual real-time PCR method. Field data acquired during 74 days of continuous operation at a mass-transit subway station are presented to demonstrate the specificity and reliability of the APDS. The U.S. Department of Homeland Security recently selected the APDS reported herein as the first autonomous detector component of their BioWatch antiterrorism program. This sophisticated field-deployed surveillance capability now generates actionable data in one-tenth the time of manual filter collection and analysis.

Abstract: Wells are designed to bring fluids from depth to the earth’s surface quickly. As such they are the most likely pathway for CO2 to return to the surface in large quantities and present a hazard without adequate management. We surveyed oil industry experience of CO2 well failures, and separately, calculated the maximal CO2 flow rate from a 5000 ft depth supercritical CO2 reservoir. The calculated maximum of 20,000 tonne/day was set by the sound speed and the seven-inch well casing diameter, and was greater than any observed event. We used this flux to simulate atmospheric releases and the associated hazard utilizing the National Atmospheric Release Advisory Center (NARAC) tools and real meteorology at a representative location in the High Plains of the United States. Three cases representing a maximum hazard day (quiet winds <1 m s−1 near the wellhead) and medium and minimal hazard days (average winds 3 m s−1 and 7 m s−1) were assessed. As expected for such large releases, there is a near-well hazard when there is little or no wind. In all three cases the hazardous Temporary Emergency Exposure Levels (TEEL) 2 or 3 only occurred within the first few hundreds of meters. Because the preliminary 3-D model runs may not have been run at high enough resolution to accurately simulate very small distances, we also used a simple Gaussian plume model to provide an upper bound on the distance at which hazardous conditions might exist. This extremely conservative model, which ignores inhomogeneity in the mean wind and turbulence fields, also predicts possible hazardous concentrations up to several hundred meters downwind from a maximal release. [Copyright &y& Elsevier]

The mechanical properties of ordinary materials degrade substantially with reduced density because their structural elements bend under applied load. We report a class of microarchitected materials that maintain a nearly constant stiffness per unit mass density, even at ultralow density. This performance derives from a network of nearly isotropic microscale unit cells with high structural connectivity and nanoscale features, whose structural members are designed to carry loads in tension or compression. Production of these microlattices, with polymers, metals, or ceramics as constituent materials, is made possible by projection microstereolithography (an additive micromanufacturing technique) combined with nanoscale coating and postprocessing. We found that these materials exhibit ultrastiff properties across more than three orders of magnitude in density, regardless of the constituent material. [ABSTRACT FROM AUTHOR]