Search

The goal of this study was to examine the characteristics of electrically induced retinal damage. A retinal prosthesis must be both effective and safe, but most research related to electrical stimulation of the retina has involved measures of efficacy (for example, stimulus threshold), while relatively little research has investigated the safety of electrical stimulation. In this study, a single platinum microelectrode was inserted into the vitreous cavity of normally-sighted adult Long Evans pigmented rats. In one group of animals, no contact was made between the electrode and the retina and current pulses of 0.05 (n = 3) and 0.2 (n = 6) μC/phase were applied. In a second group, visible contact (slight dimpling of the retina) was made between the electrode and the retina and current pulses of 0.09 (n = 4) μC/phase were applied. In both cases, stimulus pulses (biphasic, cathodic first, 1 ms/phase) were applied for 1 h at 100 Hz. Also, control experiments were run with no electrical stimulation with retina contact (n = 4) and with no retinal contact (n = 3). After stimulation, the animal was survived for 2 weeks with ocular photography and electroretinography (ERG) to document changes. During the follow-up period, retinal changes were observed only when the electrode contacted the retina, with or without electrical stimulation. No difference was noted in ERG amplitude or latency comparing the test eye to the stimulated eye. Histological analysis was performed after sacrifice at 2 weeks. A semi-quantitative method for grading 18 features of retina/RPE/choroidal appearance was established and integer grades applied to both test and control eyes. Using this method and comparing the most severely affected area (highest grade), significant differences ( p < 0.05) were noted between experiments with retinal contact and without retinal contact in all features except inner nuclear layer thickness. No difference was noted within a group based on the intensity of electrical stimulus applied. The size of the affected area was significantly larger with both retinal contact and electrical stimulation compared to withretinal contact alone. We conclude that mechanical pressure alone and mechanical pressure with excessive electrical stimulation causes damageto the retina but that electrical stimulation coupled with mechanical pressure increases the area of the damage.

The goal of this study was to examine the characteristics of electrically induced retinal damage. A retinal prosthesis must be both effective and safe, but most research related to electrical stimulation of the retina has involved measures of efficacy (for example, stimulus threshold), while relatively little research has investigated the safety of electrical stimulation. In this study, a single platinum microelectrode was inserted into the vitreous cavity of normally-sighted adult Long Evans pigmented rats. In one group of animals, no contact was made between the electrode and the retina and current pulses of 0.05 (n = 3) and 0.2 (n = 6) μC/phase were applied. In a second group, visible contact (slight dimpling of the retina) was made between the electrode and the retina and current pulses of 0.09 (n = 4) μC/phase were applied. In both cases, stimulus pulses (biphasic, cathodic first, 1 ms/phase) were applied for 1 h at 100 Hz. Also, control experiments were run with no electrical stimulation with retina contact (n = 4) and with no retinal contact (n = 3). After stimulation, the animal was survived for 2 weeks with ocular photography and electroretinography (ERG) to document changes. During the follow-up period, retinal changes were observed only when the electrode contacted the retina, with or without electrical stimulation. No difference was noted in ERG amplitude or latency comparing the test eye to the stimulated eye. Histological analysis was performed after sacrifice at 2 weeks. A semi-quantitative method for grading 18 features of retina/RPE/choroidal appearance was established and integer grades applied to both test and control eyes. Using this method and comparing the most severely affected area (highest grade), significant differences ( p < 0.05) were noted between experiments with retinal contact and without retinal contact in all features except inner nuclear layer thickness. No difference was noted within a group based on the intensity of electrical stimulus applied. The size of the affected area was significantly larger with both retinal contact and electrical stimulation compared to withretinal contact alone. We conclude that mechanical pressure alone and mechanical pressure with excessive electrical stimulation causes damageto the retina but that electrical stimulation coupled with mechanical pressure increases the area of the damage.

Objective. Retinal implants use electrical stimulation to elicit perceived flashes of light ('phosphenes'). Single-electrode phosphene shape has been shown to vary systematically with stimulus parameters and the retinal location of the stimulating electrode, due to incidental activation of passing nerve fiber bundles. However, this knowledge has yet to be extended to paired-electrode stimulation. Approach. We retrospectively analyzed 3548 phosphene drawings made by three blind participants implanted with an Argus II Retinal Prosthesis. Phosphene shape (characterized by area, perimeter, major and minor axis length) and number of perceived phosphenes were averaged across trials and correlated with the corresponding single-electrode parameters. In addition, the number of phosphenes was correlated with stimulus amplitude and neuroanatomical parameters: electrode-retina and electrode-fovea distance as well as the electrode-electrode distance to ('between-axon') and along axon bundles ('along-axon'). Statistical analyses were conducted using linear regression and partial correlation analysis. Main results. Simple regression revealed that each paired-electrode shape descriptor could be predicted by the sum of the two corresponding single-electrode shape descriptors ( p  < .001). Multiple regression revealed that paired-electrode phosphene shape was primarily predicted by stimulus amplitude and electrode-fovea distance ( p  < .05). Interestingly, the number of elicited phosphenes tended to increase with between-axon distance ( p  < .05), but not with along-axon distance, in two out of three participants. Significance. The shape of phosphenes elicited by paired-electrode stimulation was well predicted by the shape of their corresponding single-electrode phosphenes, suggesting that two-point perception can be expressed as the linear summation of single-point perception. The impact of the between-axon distance on the perceived number of phosphenes provides further evidence in support of the axon map model for epiretinal stimulation. These findings contribute to the growing literature on phosphene perception and have important implications for the design of future retinal prostheses., (Creative Commons Attribution license.)

Multielectrode arrays for interfacing with neurons are of great interest for a wide range of medical applications. However, current electrodes cause damage over time. Ultra small carbon fibers help to address issues but controlling the electrode site geometry is difficult. Here we propose a methodology to create small, pointed fiber electrodes (SPFe). We compare the SPFe to previously made blowtorched fibers in characterization. The SPFe result in small site sizes [Formula: see text] with consistently sharp points (20.8 ± 7.64°). Additionally, these electrodes were able to record and/or stimulate neurons multiple animal models including rat cortex, mouse retina, Aplysia ganglia and octopus axial cord. In rat cortex, these electrodes recorded significantly higher peak amplitudes than the traditional blowtorched fibers. These SPFe may be applicable to a wide range of applications requiring a highly specific interface with individual neurons.

Retinal prostheses stimulate inner retinal neurons to create visual perception for blind patients. Implanted arrays have many small electrodes. Not all electrodes induce perception at the same stimulus amplitude, requiring clinicians to manually establish a visual perception threshold for each one. Phosphenes created by single-electrode stimuli can also vary in shape, size, and brightness. Computational models provide a tool to predict inter-electrode variability and automate device programming. In this study, we created statistical and patient-specific field-cable models to investigate inter-electrode variability across seven epiretinal prosthesis users. Our statistical analysis revealed that retinal thickness beneath the electrode correlated with perceptual threshold, with a significant fixed effect across participants. Electrode-retina distance and electrode impedance also correlated with perceptual threshold for some participants, but these effects varied by individual. We developed a novel method to construct patient-specific field-cable models from optical coherence tomography images. Predictions with these models significantly correlated with perceptual threshold for 80% of participants. Additionally, we demonstrated that patient-specific field-cable models could predict retinal activity and phosphene size. These computational models could be beneficial for determining optimal stimulation settings in silico, circumventing the trial-and-error testing of a large parameter space in clinic., (© 2023. The Author(s).)

Shape-morphable electrode arrays can form 3D surfaces to conform to complex neural anatomy and provide consistent positioning needed for next-generation neural interfaces. Retinal prostheses need a curved interface to match the spherical eye and a coverage of several cm to restore peripheral vision. We fabricated a full-field array that can (1) cover a visual field of 57° based on electrode position and of 113° based on the substrate size; (2) fold to form a compact shape for implantation; (3) self-deploy into a curvature fitting the eye after implantation. The full-field array consists of multiple polymer layers, specifically, a sandwich structure of elastomer/polyimide-based-electrode/elastomer, coated on one side with hydrogel. Electrodeposition of high-surface-area platinum/iridium alloy significantly improved the electrical properties of the electrodes. Hydrogel over-coating reduced electrode performance, but the electrodes retained better properties than those without platinum/iridium. The full-field array was rolled into a compact shape and, once implanted into ex vivo pig eyes, restored to a 3D curved surface. The full-field retinal array provides significant coverage of the retina while allowing surgical implantation through an incision 33% of the final device diameter. The shape-changing material platform can be used with other neural interfaces that require conformability to complex neuroanatomy., (© 2023. The Author(s).)

Objective. Characterizing the relationship between neuron spiking and the signals that electrodes record is vital to defining the neural circuits driving brain function and informing clinical brain-machine interface design. However, high electrode biocompatibility and precisely localizing neurons around the electrodes are critical to defining this relationship. Approach. Here, we demonstrate consistent localization of the recording site tips of subcellular-scale (6.8 µ m diameter) carbon fiber electrodes and the positions of surrounding neurons. We implanted male rats with carbon fiber electrode arrays for 6 or 12+ weeks targeting layer V motor cortex. After explanting the arrays, we immunostained the implant site and localized putative recording site tips with subcellular-cellular resolution. We then 3D segmented neuron somata within a 50 µ m radius from implanted tips to measure neuron positions and health and compare to healthy cortex with symmetric stereotaxic coordinates. Main results. Immunostaining of astrocyte, microglia, and neuron markers confirmed that overall tissue health was indicative of high biocompatibility near the tips. While neurons near implanted carbon fibers were stretched, their number and distribution were similar to hypothetical fibers placed in healthy contralateral brain. Such similar neuron distributions suggest that these minimally invasive electrodes demonstrate the potential to sample naturalistic neural populations. This motivated the prediction of spikes produced by nearby neurons using a simple point source model fit using recorded electrophysiology and the mean positions of the nearest neurons observed in histology. Comparing spike amplitudes suggests that the radius at which single units can be distinguished from others is near the fourth closest neuron (30.7 ± 4.6 µ m,X-± S) in layer V motor cortex. Significance. Collectively, these data and simulations provide the first direct evidence that neuron placement in the immediate vicinity of the recording site influences how many spike clusters can be reliably identified by spike sorting., (Creative Commons Attribution license.)

Objective. Retinal prostheses use electric current to activate inner retinal neurons, providing artificial vision for blind people. Epiretinal stimulation primarily targets retinal ganglion cells (RGCs), which can be modeled with cable equations. Computational models provide a tool to investigate the mechanisms of retinal activation, and improve stimulation paradigms. However, documentation of RGC model structure and parameters is limited, and model implementation can influence model predictions. Approach. We created a functional guide for building a mammalian RGC multi-compartment cable model and applying extracellular stimuli. Next, we investigated how the neuron's three-dimensional shape will influence model predictions. Finally, we tested several strategies to maximize computational efficiency. Main results. We conducted sensitivity analyses to examine how dendrite representation, axon trajectory, and axon diameter influence membrane dynamics and corresponding activation thresholds. We optimized the spatial and temporal discretization of our multi-compartment cable model. We also implemented several simplified threshold prediction theories based on activating function, but these did not match the prediction accuracy achieved by the cable equations. Significance. Through this work, we provide practical guidance for modeling the extracellular stimulation of RGCs to produce reliable and meaningful predictions. Robust computational models lay the groundwork for improving the performance of retinal prostheses., (Creative Commons Attribution license.)

Retinal prostheses partially restore vision in patients blinded by retinitis pigmentosa (RP) and age-related macular degeneration (AMD). One issue that limits the effectiveness of retinal stimulation is the desensitization of the retina response to repeated pulses. Rapid fading of percepts is reported in clinical studies. We studied the retinal output evoked by fixed pulse trains vs. pulse trains that have variable parameters pulse-to-pulse. We used the current clamp to record RGC spiking in the isolated mouse retina. Trains of biphasic current pulses at different frequencies and amplitudes were applied. The main results we report are: (1) RGC desensitization was induced by increasing stimulus frequency, but was unrelated to stimulus amplitude. Desensitization persisted when the 20 Hz stimulation pulses were applied to the retinal ganglion cells at 65 μA, 85 μA, and 105 μA. Subsequent pulses in the train evoked fewer spikes. There was no obvious desensitization when 2 Hz stimulation pulse trains were applied. (2) Blocking inhibitory GABA A receptor increased spontaneous activity but did not reduce desensitization. (3) Pulse trains with constant charge or excitation (based on strength-duration curves) but varying pulse width, amplitude, and shape increased the number of evoked spikes/pulse throughout the pulse train. This suggests that retinal desensitization can be partially overcome by introducing variability into each pulse., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Li, Haji Ghaffari, Misra and Weiland.)

Current standards for safe delivery of electrical stimulation to the central nervous system are based on foundational studies which examined post-mortem tissue for histological signs of damage. This set of observations and the subsequently proposed limits to safe stimulation, termed the "Shannon limits," allow for a simple calculation (using charge per phase and charge density) to determine the intensity of electrical stimulation that can be delivered safely to brain tissue. In the three decades since the Shannon limits were reported, advances in molecular biology have allowed for more nuanced and detailed approaches to be used to expand current understanding of the physiological effects of stimulation. Here, we demonstrate the use of spatial transcriptomics (ST) in an exploratory investigation to assess the biological response to electrical stimulation in the brain. Electrical stimulation was delivered to the rat visual cortex with either acute or chronic electrode implantation procedures. To explore the influence of device type and stimulation parameters, we used carbon fiber ultramicroelectrode arrays (7 μm diameter) and microwire electrode arrays (50 μm diameter) delivering charge and charge density levels selected above and below reported tissue damage thresholds (range: 2-20 nC, 0.1-1 mC/cm 2 ). Spatial transcriptomics was performed using Visium Spatial Gene Expression Slides (10x Genomics, Pleasanton, CA, United States), which enabled simultaneous immunohistochemistry and ST to directly compare traditional histological metrics to transcriptional profiles within each tissue sample. Our data give a first look at unique spatial patterns of gene expression that are related to cellular processes including inflammation, cell cycle progression, and neuronal plasticity. At the acute timepoint, an increase in inflammatory and plasticity related genes was observed surrounding a stimulating electrode compared to a craniotomy control. At the chronic timepoint, an increase in inflammatory and cell cycle progression related genes was observed both in the stimulating vs. non-stimulating microwire electrode comparison and in the stimulating microwire vs. carbon fiber comparison. Using the spatial aspect of this method as well as the within-sample link to traditional metrics of tissue damage, we demonstrate how these data may be analyzed and used to generate new hypotheses and inform safety standards for stimulation in cortex., Competing Interests: JW has a financial interest in Epic Medical, Inc., which is commercializing electrodeposited platinum iridium. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Whitsitt, Koo, Celik, Evans, Weiland and Purcell.)

Visual prostheses can improve vision for people with severe vision loss, but low image resolution and lack of peripheral vision limit their effectiveness. To address both problems, we developed a prototype advanced video processing system with a headworn depth camera and feature detection capabilities. We used computer vision algorithms to detect landmarks representing a goal and plan a path towards the goal, while removing unnecessary distractors from the video. If the landmark fell outside the visual prosthesis's field-of-view (20 degrees central vision) but within the camera's field-of-view (70 degrees), we provided vibrational cues to the left or right temple to guide the user in pointing the camera. We evaluated an Argus II retinal prosthesis participant with significant vision loss who could not complete the task (finding a door in a large room) with either his remaining vision or his retinal prosthesis. His success rate improved to 57%, 37.5%, and 100% while requiring 52.3, 83.0, and 58.8 seconds to reach the door using only vibration feedback, retinal prosthesis with modified video, and retinal prosthesis with modified video and vibration feedback, respectively. This case study demonstrates a possible means of augmenting artificial vision. Clinical Relevance- Retinal prostheses can be enhanced by adding computer vision and non-visual cues.

Purpose: The brain is known to change functionally and structurally in response to blindness, but less is known about the effects of restoration of cortical input on brain function. Here, we present a preliminary study to observe alterations in visual and electrical evoked cortical potentials as a function of age in a clinically relevant animal model of retinitis pigmentosa., Methods: We recorded brain potentials elicited by light (visual evoked potentials [VEPs]) or corneal electrical stimulation (electrical evoked response [EER]) in retinal degenerate animal model LE-P23H-1. We used a linear mixed model to examine the effects of age on latency and amplitude of VEP and EER age groups P120, P180, and P360., Results: VEP N1, P1, and N2 latency and amplitude were analyzed across animal age. For 1 Hz VEP, N1 latency increased significantly with animal age (slope = 0.053 ± 0.020 ms/day, P < 0.01). For 10 Hz VEP, N1, P1, and N2 latency increased significantly with animal age (slope = 0.104 ± 0.011, 0.135 ± 0.011, 0.087 ± 0.023 ms/day, and P < 0.001 for all VEP peaks). Conversely, EER latency did not change with age. Signal amplitude of VEP or EER did not change with age., Conclusions: Cortical potentials evoked by electrical stimulation of the retina do not diminish in spite of continued retinal degeneration in P23H rats., Translational Relevance: These findings suggest that retinal bioelectronic treatments of retinitis pigmentosa will activate cortex consistently despite variations in outer retinal degeneration. Clinical studies of retinal stimulation should consider varying retinitis pigmentosa genotypes as part of the experimental design.

Retinal prostheses partially restore vision to late blind patients with retinitis pigmentosa through electrical stimulation of still-viable retinal ganglion cells. We investigated whether the late blind can perform visual-tactile shape matching following the partial restoration of vision via retinal prostheses after decades of blindness. We tested for visual-visual, tactile-tactile, and visual-tactile two-dimensional shape matching with six Argus II retinal prosthesis patients, ten sighted controls, and eight sighted controls with simulated ultra-low vision. In the Argus II patients, the visual-visual shape matching performance was significantly greater than chance. Although the visual-tactile shape matching performance of the Argus II patients was not significantly greater than chance, it was significantly higher with longer duration of prosthesis use. The sighted controls using natural vision and the sighted controls with simulated ultra-low vision both performed the visual-visual and visual-tactile shape matching tasks significantly more accurately than the Argus II patients. The tactile-tactile matching was not significantly different between the Argus II patients and sighted controls with or without simulated ultra-low vision. These results show that experienced retinal prosthesis patients can match shapes across the senses and integrate artificial vision with somatosensation. The correlation of retinal prosthesis patients' crossmodal shape matching performance with the duration of device use supports the value of experience to crossmodal shape learning. These crossmodal shape matching results in Argus II patients are the first step toward understanding crossmodal perception after artificial visual restoration.

Objective. To understand neural circuit dynamics, it is critical to manipulate and record many individual neurons. Traditional recording methods, such as glass microelectrodes, can only control a small number of neurons. More recently, devices with high electrode density have been developed, but few of them can be used for intracellular recording or stimulation in intact nervous systems. Carbon fiber electrodes (CFEs) are 8 µ m-diameter electrodes that can be assembled into dense arrays (pitches ⩾ 80 µ m). They have good signal-to-noise ratios (SNRs) and provide stable extracellular recordings both acutely and chronically in neural tissue in vivo (e.g. rat motor cortex). The small fiber size suggests that arrays could be used for intracellular stimulation. Approach. We tested CFEs for intracellular stimulation using the large identified and electrically compact neurons of the marine mollusk Aplysia californica . Neuron cell bodies in Aplysia range from 30 µ m to over 250 µ m. We compared the efficacy of CFEs to glass microelectrodes by impaling the same neuron's cell body with both electrodes and connecting them to a DC coupled amplifier. Main results. We observed that intracellular waveforms were essentially identical, but the amplitude and SNR in the CFE were lower than in the glass microelectrode. CFE arrays could record from 3 to 8 neurons simultaneously for many hours, and many of these recordings were intracellular, as shown by simultaneous glass microelectrode recordings. CFEs coated with platinum-iridium could stimulate and had stable impedances over many hours. CFEs not within neurons could record local extracellular activity. Despite the lower SNR, the CFEs could record synaptic potentials. CFEs were less sensitive to mechanical perturbations than glass microelectrodes. Significance. The ability to do stable multi-channel recording while stimulating and recording intracellularly make CFEs a powerful new technology for studying neural circuit dynamics., (Creative Commons Attribution license.)

Objective . Neural interfaces based on carbon fiber (CF) electrodes have demonstrated key positive attributes such as minimal foreign body response and mechanical strength to self-insert in brain tissue. However, carbon does not form a low impedance electrode interface with neural tissue. Electrodeposited platinum iridium (PtIr) has been used to improve electrode interface properties for metallic bioelectrodes. Approach . In this study, a PtIr electrodeposition process has been performed on CF microelectrode arrays to improve the interfacial properties of these arrays. We study the film morphology and composition as well as electrode durability and impedance. Results . A PtIr coating with a composition of 70% Pt, 30% Ir and a thickness of ∼400 nm was observed. Pt and Ir were evenly distributed within the film. Impedance was decreased by 89% @ 1 kHz. Accelerated soak testing in a heated ( T = 50 ∘ C) saline solution showed impedance increase (@ 1 kHz) of ∼12% after 36 days (89 equivalent) of soaking., (© 2021 IOP Publishing Ltd.)

Crossmodal mappings associate features (such as spatial location) between audition and vision, thereby aiding sensory binding and perceptual accuracy. Previously, it has been unclear whether patients with artificial vision will develop crossmodal mappings despite the low spatial and temporal resolution of their visual perception (particularly in light of the remodeling of the retina and visual cortex that takes place during decades of vision loss). To address this question, we studied crossmodal mappings psychophysically in Retinitis Pigmentosa patients with partial visual restoration by means of Argus II retinal prostheses, which incorporate an electrode array implanted on the retinal surface that stimulates still-viable ganglion cells with a video stream from a head-mounted camera. We found that Argus II patients (N = 10) exhibit significant crossmodal mappings between auditory location and visual location, and between auditory pitch and visual elevation, equivalent to those of age-matched sighted controls (N = 10). Furthermore, Argus II patients (N = 6) were able to use crossmodal mappings to locate a visual target more quickly with auditory cueing than without. Overall, restored artificial vision was shown to interact with audition via crossmodal mappings, which implies that the reorganization during blindness and the limitations of artificial vision did not prevent the relearning of crossmodal mappings. In particular, cueing based on crossmodal mappings was shown to improve visual search with a retinal prosthesis. This result represents a key first step toward leveraging crossmodal interactions for improved patient visual functionality., (Copyright © 2021 The Authors. Published by Elsevier Ltd.. All rights reserved.)

For epiretinal prostheses, disc electrodes stimulate retinal ganglion cells (RGCs) with electric current to create visual percepts. Prior studies have determined that the sodium channel band (SOCB), located on the RGC axon (30-50 μm from the soma) is the most sensitive site to extracellular stimulation because of its high sodium channel density. Biophysical cable models used to study RGC activation in silico often rely on simplified axon trajectories, disregarding the non-uniform paths that axons follow to the optic disc. However, since axonal activation is a critical mechanism in epiretinal stimulation, it is important to investigate variable RGC axon trajectories. In this study, we use a computational model to perform a sensitivity analysis examining how the morphology of an RGC axon affects predictions of retinal activation. We determine that RGC cable models are sensitive to changes in the ascending axon trajectory between the soma and nerve fiber layer. On the other hand, RGC cable models are relatively robust to trajectory deviations in the plane parallel to the disc electrode's surface. Overall, our results suggest that incorporating natural variations of soma depth and nerve fiber layer entry angle could result in a more realistic model of the retina's response to epiretinal stimulation and a better understanding of elicited visual percepts.

Retinal prostheses aim to improve visual perception in patients blinded by photoreceptor degeneration. However, shape and letter perception with these devices is currently limited due to low spatial resolution. Previous research has shown the retinal ganglion cell (RGC) spatial activity and phosphene shapes can vary due to the complexity of retina structure and electrode-retina interactions. Visual percepts elicited by single electrodes differ in size and shapes for different electrodes within the same subject, resulting in interference between phosphenes and an unclear image. Prior work has shown that better patient outcomes correlate with spatially separate phosphenes. In this study we use calcium imaging, in vitro retina, neural networks (NN), and an optimization algorithm to demonstrate a method to iteratively search for optimal stimulation parameters that create focal RGC activation. Our findings indicate that we can converge to stimulation parameters that result in focal RGC activation by sampling less than 1/3 of the parameter space. A similar process implemented clinically can reduce time required for optimizing implant operation and enable personalized fitting of retinal prostheses.

Objective: Retinal prosthetic implants have helped improve vision in patients blinded by photoreceptor degeneration. Retinal implant users report improvements in light perception and performing visual tasks, but their ability to perceive shapes and letters is limited due to the low precision of retinal activation, which is exacerbated by axonal stimulation and high perceptual thresholds. A previous in vitro study in our lab used calcium imaging to measure the spatial activity of mouse retinal ganglion cells (RGCs) in response to electrical stimulation. Based on this study, symmetric anodic-first (SA) stimulation effectively avoided axonal activation and asymmetric anodic-first stimulation (AA) with duration ratios (ratio of the anodic to cathodic phase) greater than 10 reduced RGC activation thresholds significantly. Applying these novel stimulation strategies in clinic may increase perception precision and improve the overall patient outcomes., Approach: We combined human subject testing and computational modeling to further examine the effect of SA and AA stimuli on perception shapes and thresholds for epiretinal stimulation of RGCs., Main Results: Threshold measurement in three Argus II participants indicated that AA stimulation could increase perception probabilities compared to a standard symmetric cathodic-first (SC) pulse, and this effect can be intensified by addition of an interphae gap (IPG). Our in silico RGC model predicts lower thresholds with AA and asymmetric cathodic-first (AC) stimuli compared to a SC pulse. This effect was more pronounced at shorter pulse widths. The most effective pulse for threshold reduction with short pulse durations (≤0.12 ms) was AA stimulation with small duration ratios (≤5) and long IPGs (≥2 ms). For the 0.5 ms pulse duration, SC stimulation with IPGs longer than 0.5 ms, or asymmetric stimuli with large duration ratios (≥20) were most effective in threshold reduction. Phosphene shape analysis did not reveal a significant change in percept elongation with SA stimulation. However, there was a significant increase in percept size (P < 0.01) with AA stimulation compared to the standard pulse in one participant., Significane: Including asymmetric waveform capability will provide more flexible options for optimization and personalized fitting of retinal implants.

Retinal prostheses are designed to restore a basic sense of sight to people with profound vision loss. They require a relatively intact posterior visual pathway (optic nerve, lateral geniculate nucleus and visual cortex). Retinal implants are options for people with severe stages of retinal degenerative disease such as retinitis pigmentosa and age-related macular degeneration. There have now been three regulatory-approved retinal prostheses. Over five hundred patients have been implanted globally over the past 15 years. Devices generally provide an improved ability to localize high-contrast objects, navigate, and perform basic orientation tasks. Adverse events have included conjunctival erosion, retinal detachment, loss of light perception, and the need for revision surgery, but are rare. There are also specific device risks, including overstimulation (which could cause damage to the retina) or delamination of implanted components, but these are very unlikely. Current challenges include how to improve visual acuity, enlarge the field-of-view, and reduce a complex visual scene to its most salient components through image processing. This review encompasses the work of over 40 individual research groups who have built devices, developed stimulation strategies, or investigated the basic physiology underpinning retinal prostheses. Current technologies are summarized, along with future challenges that face the field., Competing Interests: Funding and Declaration of Competing Interest LA receives licensing royalties for purchase by commercial entities for the IVI-VLV tool and is supported by a NHMRC Next Generation Fellowship (1151055) and an NHMRC Project Grant (1082358). GD is a consultant to Second Sight Medical Products (USA), and receives licensing royalties for purchase by commercial entities for the ULV-VFQ tool. JW is a consultant to Second Sight Medical Products (USA). BJ is supported by NIH grants R01 EY015128, R01 EY028927, a P30 EY014800 Vision Core Grant and an unrestricted grant from Research to Prevent Blindness to the Moran Eye Center. RH is an employee of Pixium Vision (France). MM is a consultant to Pixium Vision (France) and receives support from the National Institute for Health Research (NIHR) London Biomedical Research Centre (BRC) at Moorfields Eye Hospital NHS Foundation Trust and UCL Institute of Ophthalmology. MP and NB receive funding from Bionic Vision Technologies (Australia). DR is supported by the German Ministry for Education and Research, BMBF 031a308., (Copyright © 2019 International Federation of Clinical Neurophysiology. Published by Elsevier B.V. All rights reserved.)

Objective: Carbon fiber electrodes may enable better long-term brain implants, minimizing the tissue response commonly seen with silicon-based electrodes. The small diameter fiber may enable high-channel count brain-machine interfaces capable of reproducing dexterous movements. Past carbon fiber electrodes exhibited both high fidelity single unit recordings and a healthy neuronal population immediately adjacent to the recording site. However, the recording yield of our carbon fiber arrays chronically implanted in the brain typically hovered around 30%, for previously unknown reasons. In this paper we investigated fabrication process modifications aimed at increasing recording yield and longevity., Approach: We tested a new cutting method using a 532nm laser against traditional scissor methods for the creation of the electrode recording site. We verified the efficacy of improved recording sites with impedance measurements and in vivo array recording yield. Additionally, we tested potentially longer-lasting coating alternatives to PEDOT:pTS, including PtIr and oxygen plasma etching. New coatings were evaluated with accelerated soak testing and acute recording., Main Results: We found that the laser created a consistent, sustainable 257 ± 13.8 µm 2 electrode with low 1 kHz impedance (19 ± 4 kΩ with PEDOT:pTS) and low fiber-to-fiber variability. The PEDOT:pTS coated laser cut fibers were found to have high recording yield in acute (97% > 100 µV pp , N = 34 fibers) and chronic (84% > 100 µV pp , day 7; 71% > 100 µV pp , day 63, N = 45 fibers) settings. The laser cut recording sites were good platforms for the PtIr coating and oxygen plasma etching, slowing the increase in 1 kHz impedance compared to PEDOT:pTS in an accelerated soak test., Significance: We have found that laser cut carbon fibers have a high recording yield that can be maintained for over two months in vivo and that alternative coatings perform better than PEDOT:pTS in accelerated aging tests. This work provides evidence to support carbon fiber arrays as a viable approach to high-density, clinically-feasible brain-machine interfaces.

Direct fabrication of a three-dimensional (3D) structure using soft materials has been challenging. The hybrid bilayer is a promising approach to address this challenge because of its programable shape-transformation ability when responding to various stimuli. The goals of this study are to experimentally and theoretically establish a rational design principle of a hydrogel/elastomer bilayer system and further optimize the programed 3D structures that can serve as substrates for multi-electrode arrays. The hydrogel/elastomer bilayer consists of a hygroscopic polyacrylamide (PAAm) layer cofacially laminated with a water-insensitive polydimethylsiloxane (PDMS) layer. The asymmetric volume change in the PAAm hydrogel can bend the bilayer into a curvature. We manipulate the initial monomer concentrations of the pre-gel solutions of PAAm to experimentally and theoretically investigate the effect of intrinsic mechanical properties of the hydrogel on the resulting curvature. By using the obtained results as a design guideline, we demonstrated stimuli-responsive transformation of a PAAm/PDMS flower-shaped bilayer from a flat bilayer film to a curved 3D structure that can serve as a substrate for a wide-field retinal electrode array.

Goal: Retinal prosthesis performance is limited by the variability of elicited phosphenes. The stimulating electrode's position with respect to retinal ganglion cells (RGCs) affects both perceptual threshold and phosphene shape. We created a modeling framework incorporating patient-specific anatomy and electrode location to investigate RGC activation and predict inter-electrode differences for one Argus II user., Methods: We used ocular imaging to build a three-dimensional finite element model characterizing retinal morphology and implant placement. To predict the neural response to stimulation, we coupled electric fields with multi-compartment cable models of RGCs. We evaluated our model predictions by comparing them to patient-reported perceptual threshold measurements., Results: Our model was validated by the ability to replicate clinical impedance and threshold values, along with known neurophysiological trends. Inter-electrode threshold differences in silico correlated with in vivo results., Conclusions: We developed a patient-specific retinal stimulation framework to quantitatively predict RGC activation and better explain phosphene variations.

Degenerative retinal diseases such as retinitis pigmentosa and macular degeneration cause irreversible vision loss in more than 10 million people worldwide. Retinal prostheses, now implanted in over 250 patients worldwide, electrically stimulate surviving cells in order to evoke neuronal responses that are interpreted by the brain as visual percepts ('phosphenes'). However, instead of seeing focal spots of light, current implant users perceive highly distorted phosphenes that vary in shape both across subjects and electrodes. We characterized these distortions by asking users of the Argus retinal prosthesis system (Second Sight Medical Products Inc.) to draw electrically elicited percepts on a touchscreen. Using ophthalmic fundus imaging and computational modeling, we show that elicited percepts can be accurately predicted by the topographic organization of optic nerve fiber bundles in each subject's retina, successfully replicating visual percepts ranging from 'blobs' to oriented 'streaks' and 'wedges' depending on the retinal location of the stimulating electrode. This provides the first evidence that activation of passing axon fibers accounts for the rich repertoire of phosphene shape commonly reported in psychophysical experiments, which can severely distort the quality of the generated visual experience. Overall our findings argue for more detailed modeling of biological detail across neural engineering applications.

Objective: Retinal prosthetic implants restore partial vision to patients blinded due to outer retinal degeneration, using a camera-guided multielectrode array (MEA) that electrically stimulates surviving retinal neurons. Commercial epi-retinal prostheses use millisecond-scale charge-balanced, symmetric, cathodic-first biphasic pulses to depolarize retinal ganglion cells (RGCs) and bipolar cells (BCs), frequently creating oblong perceptions of light related to axonal activation of RGCs. Stimulation strategies that avoid axonal stimulation and decrease the threshold of targeted neurons may significantly improve prosthetic vision in terms of spatial resolution and power efficiency., Approach: We developed a virus-transduced genetically encoded calcium indicator (GECI) GCaMP6f and microscopy platform for calcium imaging to record the neural activity from RGCs at single-cell resolution in wholemount retinas. Multiple stimulation paradigms were applied through a microelectrode array (MEA) with transparent indium tin oxide electrodes. The evoked neuronal activities were converted to corresponding 2D calcium imaging transient pattern and spatial threshold map to identify the ideal focal response which corresponds to optimal percept in patient., Main Results: The proposed optical system with GCaMP6f is capable of recording from population of mouse RGCs in real time during electrical stimulation with precise location information relative to the stimulation sites. Optimal duration and phase order of pulse were identified to avoid axonal stimulation and selectively activate targeted RGC somas, without requiring a significant increase in stimulation charge. Additionally, we show that reduced stimulus threshold can be achieved with the special design of asymmetric anodic-first pulse., Significance: Our findings support the possibility of manipulating the responses of RGCs through varying the stimulation waveform. Focal response can be achieved with relative short duration (⩽120 μs) pulses, and can be improved by reversing the standard phase order. The RGCs threshold can be significantly reduced by 33.3%-50% in terms of charge through applying hyperpolarizing pre-pulses with a 20:1 ratio (pre-pulse:stimulus pulse). The results support the future retinal prosthesis design that potentially forms more ideal shape perception with higher spatial resolution and power efficiency.

Purpose: Electronic retinal prostheses restore vision in people with outer retinal degeneration by electrically stimulating the inner retina. We characterized visual cortex electrophysiologic response elicited by electrical stimulation of retina in normally sighted and retinal degenerate rats., Methods: Nine normally sighted Long Evans and 11 S334ter line 3 retinal degenerate ( rd ) rats were used to map cortical responses elicited by epiretinal electrical stimulation in four quadrants of the retina. Six normal and six rd rats were used to compare the dendritic spine density of neurons in the visual cortex., Results: The rd rats required higher stimulus amplitudes to elicit responses in the visual cortex. The cortical electrically evoked responses (EERs) for both healthy and rd rats show a dose-response characteristic with respect to the stimulus amplitude. The EER maps in healthy rats show retinotopic organization. For rd rats, cortical retinotopy is not well preserved. The neurons in the visual cortex of rd rats show a 10% higher dendritic spine density than in the healthy rats., Conclusions: Cortical activity maps, produced when epiretinal stimulation is applied to quadrants of the retina, exhibit retinotopy in normal but not rd rats. This is likely due to a combination of degeneration of the retina and increased stimulus thresholds in rd , which broadens the activated area of the retina., Translational Relevance: Loss of retinotopy is evident in rd rats. If a similar loss of retinotopy is present in humans, retinal prostheses design must include flexibility to account for patient specific variability.

Objective: This in vitro investigation examines the response of retinal bipolar cells to extracellular electrical stimulation., Approach: In vitro investigations characterizing the response of retinal neurons to electrical stimulation have primarily focused on retinal ganglion cells because they are the output neurons of the retina and their superficial position in the retina makes them readily accessible to in vitro recording techniques. Thus, the majority of information regarding the response of inner retinal neurons has been inferred from ganglion cell activity. Here we use patch clamp electrophysiology to directly record electrically-evoked activity in bipolar cells within the inner retina of normal Tg(Gng13-EGFP)GI206Gsat and degenerate rd10 Tg(Gng13-EGFP)GI206Gsat mice using a wholemount preparation., Main Results: Bipolar cells respond to electrical stimulation with time-locked depolarizing voltage transients. The latency of the response declines with increases in stimulation amplitude. A desensitizing response is observed during repeated stimulation with 25 ms biphasic current pulses delivered at pulse rates greater than 6 pps. A burst of long-latency (200-1000 ms) inhibitory postsynaptic potentials are evoked by the stimulus and the burst exhibits evidence of a lower and upper stimulation threshold., Significance: These results provide insights into the various types of bipolar cell activity elicited by electrical stimulation and may be useful for future retinal prosthesis stimulation protocols. This investigation uses patch clamp electrophysiology to provide direct analysis of ON-type bipolar cell responses to electrical stimulation in a wholemount retina preparation. It explores the effects of variable stimulus amplitudes, pulse widths, and frequencies in both normal and degenerate retina. The analysis adds to a body of work largely based upon indirect measurements of bipolar cell activity, and the methodology demonstrates an alternative retina preparation technique in which to acquire single-cell activity.

The purpose of this study is to measure, characterize, and compare the viscoelastic properties of the posterior eye of advanced dry age-related macular degeneration (AMD) patients, age-matched normal subjects, and pigs (3 groups). Ten horizontal and ten vertical strips of the macula retina and the underneath choroid and sclera were obtained for each group, respectively. They were examined by incremental stress-relaxation cycles in body-temperature saline. Mechanical response was characterized by the quasi-linear viscoelastic model. All the tissues were shown to be nonlinear viscoelastic. Stiffening and isotropization, increased relaxation, and softening and isotropization were found in AMD retina, choroid, and sclera, respectively, which are the mechanical features of the atherosclerotic process. The patients' medical records were in accordance with epidemiological studies indicating a relationship between the advanced AMD and atherosclerotic vascular disease (ASVD). Moreover, many differences were found between the viscoelastic properties of porcine and normal human retina, choroid, and sclera. The results suggest that AMD is associated with ASVD through a mechanism involving abnormal retinal, choroidal, and scleral mechanics similar to those seen in the atherosclerotic process. Moreover, researchers should be aware of mechanical differences when using porcine posterior eyes as a substitute for human posterior eyes. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2151-2157, 2018., (© 2018 Wiley Periodicals, Inc.)

The purpose of this study was to assess the ability of blind individuals to reach and grasp for objects, under the guidance of auditory (verbal) or vibrotactile cues controlled by real time computer vision algorithms. For these experiments, we created the Object Localization and Tracking System (OLTS). The OLTS utilized a head mounted wide-angle (diagonal 92° degrees) monocular camera, a central processing unit and two types of physical feedback: auditory bone conduction headphones or cranially positioned vibration motors. A computer vision algorithm, the Context Tracker, processed live video to track objects in front of the visually impaired subject. Physical feedback was then generated based on the object position. The feedback guided the user to move the camera until the desired object was in the central region of the camera, defined by an angle of the camera field of view. The central region was varied between 3.9 and 39.6 degrees. Experiments consisted of localizing and grasping for an object based on feedback provided. On average, subjects were able to locate the correct object within 20 seconds. For auditory feedback, using a central angle of 7.8° led to poor performance compared to the other angles. Performance using vibrotactile feedback worsened when using a central angle of 3.9°. No consistent performance trends were evident based on age of blindness onset.

Objective: We propose a novel attachment method for retinal tissue that utilizes silicone modified with bioactive molecules., Design: This is an experimental study divided into an in vitro section performed in cadaveric pig eyes and an in vivo section performed in rabbits., Subjects: During in vitro experiments 36 cadaveric pig eyes were used. During in vivo experiments 4 rabbits were used., Methods: Different types of silicone went through a laser irradiation process to determine if binding sites for disintegrins could be created. Laser treated silicones that showed disintegrin binding were evaluated with in vitro testing for retina-silicone attachment. The best silicone binding in vitro was implanted into a rabbit's eye after a full vitrectomy was performed. Post-operative exams were done every two weeks to evaluate placement, attachment and sterilization method. After three months animals were euthanized and eye was enucleated for histology analysis., Main Outcome Measures: Attachment strength between silicone-disintegrin-retina, and signs of endophthalmitis during in vivo studies for biocompatibility purposes., Results: A technique to successfully lase and produce an active area on the silicone surface was described. Scanning electron microscope (SEM) images were evaluated to assess physical ablation/debris field area on the surface, definition of edges, evenness, and symmetry of the lased area allowing us to select MED 4800 silicone family for further testing. Cell culture experiments showed disintegrin binding to the silicone active area. In vitro experiments with cadaveric eyes were performed to test retina-silicone attachment. MED 4860 showed strongest attachment to the retina and it was used during in vivo experiments. A sterilization protocol was tested and proved to be reliable for bioactive materials. Disintegrin coated silicone showed attachment in 2 of 4 rabbits during the 3-month implant period. The adhesion was persistent until reversed with plasmin. All rabbits were implanted for 3 months regardless of attachment, to test the feasibility of the sterilization method. None of the rabbits developed any type of eye infection during the implant period., Conclusion: We successfully lased and produced an active area on the silicone surface to allow disintegrin-silicone binding. Different silicones interact differently with the laser energy, and this is reflected in the strength of the silicone-disintegrin-retina attachment.

Patch clamp recordings of neurons in the inner nuclear layer of the retina are difficult to conduct in a whole mount retina preparation because surrounding neurons block the path of the patch pipette. Vertical slice preparations or dissociated retinal cells provide access to bipolar cells at the cost of severing the lateral connection between neurons. We have developed a technique to remove photoreceptors from the rodent retina that exposes inner nuclear layer neurons, allowing access for patch clamp recording. Repeated application to and removal of filter paper from the photoreceptor side of an isolated retina effectively and efficiently removes photoreceptor cells and, in degenerate retina, hypertrophied Müller cell end feet. Live-dead assays applied to neurons remaining after photoreceptor removal demonstrated mostly viable cells. Patch clamp recordings from bipolar cells reveal responses similar to those recorded in traditional slice and dissociated cell preparations. An advantage of the photoreceptor peel technique is that it exposes inner retinal neurons in a whole mount retina preparation for investigation of signal processing. A disadvantage is that photoreceptor removal alters input to remaining retinal neurons. The technique may be useful for investigations of extracellular electrical stimulation, photoreceptor DNA analysis, and nonpharmacological removal of light input. NEW & NOTEWORTHY This study reports a method for removing photoreceptors from rodent whole mount retina while preserving the architecture of the inner retina. The method enables easier access to the inner retina for studies of neural processing, such as by patch clamp recording., (Copyright © 2017 the American Physiological Society.)

Objective: Virus-transduced, intracellular-calcium indicators are effective reporters of neural activity, offering the advantage of cell-specific labeling. Due to the existence of an optimal time window for the expression of calcium indicators, a suitable tool for tracking GECI expression in vivo following transduction is highly desirable., Approach: We developed a noninvasive imaging approach based on a custom-modified, low-cost fundus viewing system that allowed us to monitor and characterize in vivo bright-field and fluorescence images of the mouse retina. AAV2-CAG-GCaMP6f was injected into a mouse eye. The fundus imaging system was used to measure fluorescence at several time points post injection. At defined time points, we prepared wholemount retina mounted on a transparent multielectrode array and used calcium imaging to evaluate the responsiveness of retinal ganglion cells (RGCs) to external electrical stimulation., Main Results: The noninvasive fundus imaging system clearly resolves individual (RGCs and axons. RGC fluorescence intensity and the number of observable fluorescent cells show a similar rising trend from week 1 to week 3 after viral injection, indicating a consistent increase of GCaMP6f expression. Analysis of the in vivo fluorescence intensity trend and in vitro neurophysiological responsiveness shows that the slope of intensity versus days post injection can be used to estimate the optimal time for calcium imaging of RGCs in response to external electrical stimulation., Significance: The proposed fundus imaging system enables high-resolution digital fundus imaging in the mouse eye, based on off-the-shelf components. The long-term tracking experiment with in vitro calcium imaging validation demonstrates the system can serve as a powerful tool monitoring the level of genetically-encoded calcium indicator expression, further determining the optimal time window for following experiment.

Retinal prostheses have demonstrated the capability to give blind patients the ability to detect motion and locate large objects. High-resolution retinal prostheses require precise activation of retinal cells to elicit a small visual phosphine that can serve as a building block to make patterns. Each electrode should activate only nearby cells, however patients receiving single electrode stimulation often report a streak-shaped phosphene rather than a focal spot. It is important to investigate stimulus paradigms that will provide better control over the spatial patterns of activation. During this study a 55 year old patient implanted with the Argus II system on August 2015 was tested with single electrode stimulation and pattern stimulation experiments. Tasks were performed using Argus II normal parameters.

Retinal prosthetic implants have shown potential to restore partial vision to patients blinded by retinitis pigmentosa or dry age-related macular degeneration, via a camera-driven multielectrode array that electrically stimulates surviving retinal neurons. Commercial epi-retinal prostheses mostly use charge-balanced symmetric cathodic-first biphasic pulses to depolarize retinal ganglion cells (RGCs) and bipolar cells (BCs), resulting in the perception of light in blind patients. However, previous clinical study for patients with Argus II epiretinal implants reported most percepts evoked by single electrode stimulation were elongated and aligned with estimated axon path of retinal ganglion cells, suggesting the activation of axon bundles. In this project, using an established genetically encoded calcium indicator (GECI), we performed in vitro calcium imaging for different stimulation paradigms, focusing primarily on short duration pulse that can avoid axonal stimulation and selective activate targeted RGC soma. The findings support the possibility to manipulate the responses of RGCs through varying the stimulation waveform, thus potentially forming more ideal shape perception with higher spatial resolution in future retinal prosthesis design.

Sensory substitution devices engage sensory modalities other than vision to communicate information typically obtained through the sense of sight. In this paper, we examine the ability of subjects who are blind to follow simple verbal and vibrotactile commands that allow them to navigate a complex path. A total of eleven visually impaired subjects were enrolled in the study. Prototype systems were developed to deliver verbal and vibrotactile commands to allow an investigator to guide a subject through a course. Using this mode, subjects could follow commands easily and navigate significantly faster than with their cane alone (p <0.05). The feedback modes were similar with respect to the increased speed for course completion. Subjects rated usability of the feedback systems as "above average" with scores of 76.3 and 90.9 on the system usability scale., Competing Interests: The authors have declared that no competing interests exist.

Retinal prostheses aim to restore vision to blind individuals suffering from retinal diseases such as retinitis pigmentosa and age-related macular degeneration. These devices function by electrically stimulating surviving retinal neurons, whose activation is interpreted by the brain as a visual percept. Many prostheses are currently under development. They are categorized as epiretinal, subretinal, and suprachoroidal prostheses on the basis of the placement of the stimulating microelectrode array. Each can activate ganglion cells through direct or indirect stimulation. The response of retinal neurons to these modes of stimulation are discussed in detail and are placed in context of the visual percept they are likely to evoke. This article further reviews challenges faced by retinal prosthesis and discusses potential solutions to address them.

Objective: This study analyzes the peak resistance frequency (PRF) method described by Mercanzini et al., a method that can easily extract the tissue resistance from impedance spectroscopy for many neural engineering applications but has no analytical description thus far., Methods: Mathematical analyses and computer simulations were used to explore underlying principles, accuracy, and limitations of the PRF method., Results: The mathematical analyses demonstrated that the PRF method has an inherent but correctable deviation dependent on the idealness of the electrode-tissue interface, which is validated by simulations. Further simulations show that both frequency sampling and noise affect the accuracy of the PRF method, and in general, it performs less accurately than least squares methods. However, the PRF method achieves simplicity and reduced measurement and computation time at the expense of accuracy., Conclusion: From the qualitative results, the PRF method can work with reasonable precision and simplicity, although its limitation and the idealness of the electrode-tissue interface involved should be taken into consideration., Significance: This paper provides a mathematical foundation for the PRF method and its practical implementation.

Deep brain stimulation (DBS) devices have been implanted for treatment of basic tremor, Parkinson's disease and dystonia. These devices use electrodes in contact with tissue to deliver electrical pulses to targeted cells, to elicit specific therapeutic responses. In general, the neuromodulation industry has been evolving towards smaller, less invasive electrodes. However, current electrode materials do not support small sizes without severely restricting the stimulus output. Hence, an improved electrode material will benefit present and future DBS systems. In this study, five DBS leads were modified using a cost-effective and materials-efficient process for applying an ultra-low impedance platinum-iridium alloy coating. One DBS lead was used for insertion test and four DBS leads were chronically pulsed for 12 weeks. The platinum-iridium alloy significantly improved the electrical properties of the DBS electrodes and was robust to insertion into brain and to 12 weeks of chronic pulsing.

Retinal prostheses provide the capability to blind patients to detect motion and locate large objects. To avoid activating axons of passage, which can create streak-like perceptions, long pulse stimulation can be used to bypass axons and achieve focal retinal activation. Safety is a concern because long pulses require more charge than short pulses to elicit a response from neural tissue. Future implants will require smaller electrodes to improve resolution, but increased charge density may result, which is another safety concern. We developed a method to study the effects of electrical stimulation in the retina in real time using OCT (Optical Coherence Tomography) imaging combined with micropositioning of a stimulating electrode over the retina in an animal model. When using a 250-micron diameter electrode and stimulating for 30 minutes (frequency: 333 Hz), charge density: 1.22 mC/cm 2 , we observed an increase in retinal thickness from 154.3 μm ± 7.04 μm to 179.67 μm ± 0.47 μm , a 16.66 % ± 5.49% increase compared to baseline. The region of increased thickness extended laterally for 0.56 mm ± 0.009 mm. When stimulating with a charge density of 1.63 mC/cm 2 , we observed an increase in retinal thickness from 160.3 μm ± 2.05 μm to 190 μm ± 0.81 μm , a 19.52 % ± 1.86% increase compared to baseline. The region of increased thickness expanded laterally for 1.27 mm ± 0.19 mm.

Virus-transduced calcium indicators are effective reporters of neural activity, offering the advantage of cell-specific labeling. To track the level of in vivo expression of genetically encoded calcium indicators (GECIs) in rodent retina, we developed a noninvasive imaging approach based on a custom-modified low-cost and simple fundus system that enabled us to monitor and characterize in vivo bright-field and fluorescence retinal image. The system clearly resolves individual retinal ganglion cells (RGCs) and axons. RGC fluorescence intensity and number of observable fluorescent cells show a consistent rising trend from week 1 to week 3 after viral injection, indicating a uniform increase of GCaMP6f expression. At defined time points, we prepared wholemount retina mounted on a transparent multielectrode array (MEA) and used calcium imaging to identify the optimal time for studying the responsiveness of RGCs to external electrical stimulation. The results show that the fluorescence-endoscopy fundus system is a powerful and widely accessible tool for evaluating in vivo fluorescence reporter expression.

Retinitis Pigmentosa (RP) is a degenerative disease of the retina that leads to vision loss. Retinal prostheses are being developed in order to restore functional vision in patients suffering from RP. We conducted in-vivo experiments in order to identify strategies to efficiently stimulate the retina. We electrically stimulated the retina and measured electrically evoked potentials (EERs) from the superior colliculus of rats. We compared the strength of EERs when voltage-controlled and current-controlled pulses of varying pulse width and charge levels were applied to the retina. In addition to comparing EER strength, we evaluated improvement in power efficiency afforded by a high surface area platinum-iridium material. Voltage-controlled pulses were more efficient than current-controlled pulses when the pulses have a short duration (<; 1 ms) and current-controlled pulses were more efficient than voltage-controlled pulses when the pulse width was greater than 1 ms. The high surface area platinum-iridium stimulation electrode consumed power significantly lower than a standard platinum-iridium electrode.

Retinal degeneration, a leading cause of blindness worldwide, is primarily characterized by the dysfunctional/degenerated photoreceptors that impair the ability of the retina to detect light. Our group and others have shown that bioelectronic retinal implants restore useful visual input to those who have been blind for decades. This unprecedented approach of restoring sight demonstrates that patients can adapt to new visual input, and thereby opens up opportunities to not only improve this technology but also develop alternative retinal stimulation approaches. These future improvements or new technologies could have the potential of selectively stimulating specific cell classes in the inner retina, leading to improved visual resolution and color vision. In this review we will detail the progress of bioelectronic retinal implants and future devices in this genre as well as discuss other technologies such as optogenetics, chemical photoswitches, and ultrasound stimulation. We will discuss the principles, biological aspects, technology development, current status, clinical outcomes/prospects, and challenges for each approach. The review will cover functional imaging documented cortical responses to retinal stimulation in blind patients., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Background: A position paper based on the collective experiences of Argus II Retinal Prosthesis System investigators to review strategies to optimize outcomes in patients with retinitis pigmentosa undergoing retinal prosthesis implantation., Methods: Retinal surgeons, device programmers, and rehabilitation specialists from Europe, Canada, Middle East, and the United States were convened to the first international Argus II Investigator Meeting held in Ann Arbor, MI in March 2015. The recommendations from the collective experiences were collected. Factors associated with successful outcomes were determined., Results: Factors leading to successful outcomes begin with appropriate patient selection, expectation counseling, and preoperative retinal assessment. Challenges to surgical implantation include presence of staphyloma and inadequate Tenon's capsule or conjunctiva. Modified surgical technique may reduce risks of complications such as hypotony and conjunctival erosion. Rehabilitation efforts and correlation with validated outcome measures following implantation are critical., Conclusions: Bringing together Argus II investigators allowed the identification of strategies to optimize patient outcomes. Establishing an on-line collaborative network will foster coordinated research efforts to advance outcome assessment and rehabilitation strategies.

Retinal prosthetic implants are the only approved treatment for retinitis pigmentosa, a disease of the eye that causes blindness through gradual degeneration of photoreceptors. An array of microelectrodes triggered by input from a camera stimulates surviving retinal neurons, with each electrode acting as a pixel. Unintended stimulation of retinal ganglion cell axons causes patients to see large oblong shapes of light, rather than focal spots, making it difficult to perceive forms. To address this problem, we performed calcium imaging in isolated retinas and mapped the patterns of cells activated by different electrical stimulation protocols. We found that pulse durations two orders of magnitude longer than those typically used in existing implants stimulated inner retinal neurons while avoiding activation of ganglion cell axons, thus confining retinal responses to the site of the electrode. Multielectrode stimulation with 25-ms pulses can pattern letters on the retina corresponding to a Snellen acuity of 20/312. We validated our findings in a patient with an implanted epiretinal prosthesis by demonstrating that 25-ms pulses evoke focal spots of light., (Copyright © 2015, American Association for the Advancement of Science.)

Purpose: Magnetic resonance imaging (MRI) can measure the effects of vision loss and recovery on brain function and structure. In this case study, we sought to determine the feasibility of acquiring anatomical and functional MRI data in recipients of the Argus II epiretinal prosthesis system., Methods: Following successful implantation with the Argus II device, two retinitis pigmentosa (RP) patients completed MRI scans with their implant unpowered to measure primary visual cortex (V1) functional responses to a tactile task, whole-brain morphometry, V1 cortical thickness, and diffusion properties of the optic tract and optic radiation. Measurements in the subjects with the Argus II implant were compared to measurements obtained previously from RP patients and sighted individuals., Results: The presence of the Argus II implant resulted in artifacts that were localized around the patient's implanted eye and did not extend into cortical regions or white matter tracts associated with the visual system. Structural data on V1 cortical thickness and the retinofugal tract obtained from the two Argus II subjects fell within the ranges of sighted and RP groups. When compared to the RP and sighted subjects, Argus II patients' tactile-evoked cross-modal functional MRI (fMRI) blood oxygen level-dependent (BOLD) responses in V1 also fell within the range of either sighted or RP groups, apparently depending on time since implantation., Conclusions: This study demonstrates that successful acquisition and quantification of structural and functional MR images are feasible in the presence of the inactive implant and provides preliminary information on functional changes in the brain that may follow sight restoration treatments., Transitional Relevance: Successful MRI and fMRI acquisition in Argus II recipients demonstrates feasibility of using MRI to study the effect of retinal prosthesis use on brain structure and function.