Search

Abstract: Perovskite solar cells (PSCs) are emerging among the photovoltaic (PV) technologies due to their high power conversion efficiency (PCE) in combination with potentially low cost manufacturing processing. In this contribution, the fabrication of efficient planar n‐i‐p PSCs by the modification of the electron transport layer (ETL) adopted as n‐type contact is demonstrated. Specifically, a fluorine‐based plasma treatment prior to perovskite deposition leads to surface fluorination of the TiO2 ETL. The presence of fluorine on the TiO2 surface drastically improves the adhesion between the ALD layer and the methylammonium lead iodide perovskite film, and leads to a more favourable energy band alignment, accompanied by a faster electron carrier extraction at the interface. As consequence of surface fluorination, we observe a significant reduction in the current density‐voltage curve hysteresis with respect to the ALD based reference sample, as well as a remarkable improvement in power conversion efficiency from 4% up to a stable 14.8%. [ABSTRACT FROM AUTHOR]

Minimizing the reverse bias dark current while retaining external quantum efficiency is crucial if the light detection sensitivity of organic photodiodes (OPDs) is to compete with inorganic photodetectors. However, a quantitative relationship between the magnitude of the dark current density under reverse bias (Jd) and the properties of the bulk heterojunction (BHJ) active layer has so far not been established. Here, a systematic analysis of Jd in state‐of‐the‐art BHJ OPDs using five polymers with a range of energy levels and charge transport characteristics is presented. The magnitude and activation energy of Jd are explained using a model that assumes charge injection from the metal contacts into an energetically disordered semiconductor. By relating Jd to material parameters, insights into the origin of Jd are obtained that enable the future selection of successful OPD materials. [ABSTRACT FROM AUTHOR]

Interfaces between the photoactive and charge transport layers are crucial for the performance of perovskite solar cells. Surface passivation of SnO2 as electron transport layer (ETL) by fullerene derivatives is known to improve the performance of n–i–p devices, yet organic passivation layers are susceptible to removal during perovskite deposition. Understanding the nature of the passivation is important for further optimization of SnO2 ETLs. X‐ray photoelectron spectroscopy depth profiling is a convenient tool to monitor the fullerene concentration in passivation layers at a SnO2 interface. Through a comparative study using [6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) and [6,6]‐phenyl‐C61‐butyric acid (PCBA) passivation layers, a direct correlation is established between the formation of interfacial chemical bonds and the retention of passivating fullerene molecules at the SnO2 interface that effectively reduces the number of defects and enhances electron mobility. Devices with only a PCBA‐monolayer‐passivated SnO2 ETL exhibit significantly improved performance and reproducibility, achieving an efficiency of 18.8%. Investigating thick and solvent‐resistant C60 and PCBM‐dimer layers demonstrates that the charge transport in the ETL is only improved by chemisorption of the fullerene at the SnO2 surface. [ABSTRACT FROM AUTHOR]