Search

This project aims to advance differentiable fluid dynamics for hypersonic coupled flow over porous media, demonstrating the potential of automatic differentiation (AD)-based optimization for end-to-end solutions. Leveraging AD efficiently handles high-dimensional optimization problems, offering a flexible alternative to traditional methods. We utilized JAX-Fluids, a newly developed solver based on the JAX framework, which combines autograd and TensorFlow's XLA. Compiled on a HAWK-AI node with NVIDIA A100 GPU, JAX-Fluids showed computational performance comparable to other high-order codes like FLEXI. Validation with a compressible turbulent channel flow DNS case showed excellent agreement, and a new boundary condition for modeling porous media was successfully tested on a laminar boundary layer case. Future steps in our research are anticipated.

In this study, we propose a novel approach, namely the combined Convolutional Deep Autoencoder Echo State Network (CDAE ESN) model, for the analysis and forecasting of dynamics and low order statistics in coupled turbulent channel porous media flows. Such systems find wide applications in industrial settings, including transpiration cooling and smart interface engineering. However, the complex geometry of coupled flow systems presents additional challenges for purely data-driven models. Our results demonstrate that the integration of deep autoencoder and echo state network techniques enables effective modeling and prediction of dominant flow behaviors, particularly within the porous domain exhibiting laminar regimes. To enhance the model s applicability across a broader range of data domains, we further employ fine-tuning on a dataset encompassing varying porosities. The achieved average statistics exhibit a reasonable agreement, underscoring the efficacy of our proposed approach., Comment: arXiv admin note: substantial text overlap with arXiv:2311.15600; text overlap with arXiv:2312.00527

The interaction between boundary layer turbulence and a porous layer is the cornerstone to the interface engineering. In this study, the spatial resolved transfer entropy is used to assess the asymmetry of the causal interaction next to a permeable wall. The analysis was based on pore-resolved direct numerical simulation of turbulent channel flow over a cylinder array. The spatial map of transfer entropy reveals the information flux between the porous medium and arbitrary nearby position.

The fluid dynamics of liquid droplet impact on surfaces hold significant relevance to various industrial applications. However, high impact velocities introduce compressible effects, leading to material erosion. A gap in understanding and modeling these effects has motivated this study. We simulated droplet impacts on surfaces and proposed a new analytical model for impact pressure and droplet turning line, targeting at predictions for enhanced cavitation. The highly compressed liquid behind the droplet expands sideways, causing lateral jetting. As the droplet encounters a shock wave, it reflects as a rarefaction wave, leading to low-pressure zones within the droplet. These zones converge at the droplet's center, causing cavitation, which, upon collapse, induces another shock wave, contributing to erosion. Using the well-established model for the low-velocity impact shows a significant discrepancy. Hence, an analytical model for the turning line radius is introduced, incorporating the lateral jetting's characteristic length scale. Comparing our model with existing ones, our new model exhibits superior predictive accuracy.

In-air microfluidics became a new method for technical production processes with ultra-high throughput formerly performed in micro channels. Direct Numerical Simulations (DNS) provide a valuable contribution for the fundamental understanding of multiphase flow and later application design. This chapter presents a feasibility study with first DNS results of droplet-jet collisions of immiscible liquids using the in-house software Free Surface 3D (FS3D). Two cases were investigated with a setup comparable to experiments by Baumgartner et al. [1], where a droplet chain of a glycerol solution hits a jet of silicon oil which encapsulates the droplets. The droplets' shapes present are observed to be more complex than comprehensible from the two-dimensional images from the experiments. Thus, DNS with FS3D can provide additional information like the surface area or the velocity contributions in order to find analytical models of such collision processes in the future. Simulations of such increasingly complex systems require constant improvement of the numerical solver regarding the code's performance. Thus, the red-black Gauss-Seidel smoother in the multi-grid solver, the iterative red-black scheme to compute the viscous forces as well as the momentum advection method were enhanced with a cache- and memory usage optimization. An overall performance gain of up to 33% was obtained for a representative test case., Comment: This is a preprint of a chapter which will be published in the conference proceedings High Performance Computing in Science and Engineering '22, edited by W. E. Nagel, D. H. Kr\"oner and M. M. Resch, Springer reproduced with permission of Springer Nature Switzerland AG. (Changelog V2: expected publisher and editor added)

Collisions between a stream of drops and a continuous jet of a different liquid are experimentally investigated. In contrast to previous studies, our work focuses on the effects of liquid miscibility and wettability on the collision outcomes. Thus, miscible and immiscible liquids providing total and partial wetting are used. We show that, as long as the jet surface tension is smaller than the drop surface tension, the drops can be encapsulated by the jet, providing the so-called drops-in-jet structure. The transitions between the different regimes remain similar in nature with a capillary fragmentation responsible for the jet break-up and an inertial fragmentation causing the drops (and then possibly the jet) to break up. The dimensionless numbers proposed in the literature to model the inertial fragmentation thresholds do not bring the results obtained with different liquids at the same critical value. We explain the reason via a detailed analysis of the collisions, accounting for the drop and jet extensions and their kinetics. The drop fragmentation is found to occur during the recoil phase, leading us to propose a new dimensionless parameter that successfully reproduced all our experimental data obtained with immiscible liquids. Finally we demonstrate that the most dramatic change of the collision outcomes is produced by using drops that totally wet the jet. In this case, the encapsulation of the drops cannot be achieved, constituting a true limit to some applications based on the solidification of the drops-in-jet structure., Comment: 34 pages, 15 figures

The interaction between the flow above and below a permeable wall is a central topic in the study of porous media. While previous investigations have provided compelling evidence of the strong coupling between the two regions, few studies have quantitatively measured the directionality, i.e., causal-and-effect relations, of this interaction. To shed light on the problem, we use transfer entropy as a marker to evaluate the causal interaction between the free turbulent flow and the porous media using interface-resolved direct numerical simulation. Our results show that the porosity of the porous medium has a profound impact on the intensity, time scale and spatial extent of surface-subsurface interactions. For values of porosity equal to 0.5, top-down and bottom-up interactions strongly are asymmetric, the former being mostly influenced by small near-wall eddies. As the porosity increases, both top-down and bottom-up interactions are dominated by shear-flow instabilities.

Experiments and numerical simulations were carried out in order to contribute to a better understanding and prediction of high-pressure injection into a gaseous environment. Specifically, the focus was put on the phase separation processes of an initially supercritical fluid due to the interaction with its surrounding. N-hexane was injected into a chamber filled with pure nitrogen at 5 MPa and 293 K and three different test cases were selected such that they cover regimes in which the thermodynamic non-idealities, in particular the effects that stem from the potential phase separation, are significant. Simultaneous shadowgraphy and elastic light scattering experiments were conducted to capture both the flow structure as well as the phase separation. In addition, large-eddy simulations with a vapor-liquid equilibrium model were performed. Both experimental and numerical results show phase formation for the cases, where the a-priori calculation predicts two-phase flow. Moreover, qualitative characteristics of the formation process agree well between experiments and numerical simulations and the transition behaviour from a dense-gas to a spray-like jet was captured by both., Comment: ILASS 2017, Valencia, Spain

Scalar features in time-dependent fluid flow are traditionally visualized using 3D representation, and their topology changes over time are often conveyed with abstract graphs. Using such techniques, however, the structural details of feature separation and the temporal evolution of features undergoing topological changes are difficult to analyze. In this paper, we propose a novel approach for the spatio-temporal visualization of feature separation that segments feature volumes into regions with respect to their contribution to distinct features after separation. To this end, we employ particle-based feature tracking to find volumetric correspondences between features at two different instants of time. We visualize this segmentation by constructing mesh boundaries around each volume segment of a feature at the initial time that correspond to the separated features at the later time. To convey temporal evolution of the partitioning within the investigated time interval, we complement our approach with spatio-temporal separation surfaces. For the application of our approach to multiphase flow, we additionally present a feature-based corrector method to ensure phase-consistent particle trajectories. The utility of our technique is demonstrated by application to two-phase (liquid-gas) and multi-component (liquid-liquid) flows where the scalar field represents the fraction of one of the phases.