Search

A tandem structure was invented to enhance photon utilization efficiency and reduce thermal loss. Considering the unique advantages of non-fullerene acceptors (NFAs), the combination of NFAs and the tandem concept shows great potential for organic photovoltaics (OPVs). Herein, a simple strategy to balance the voltage-current trade-off in tandem OPVs by employing mixed NFAs in rear sub-cells is reported. The V OC and J SC of rear sub-cells can be tuned by using the blend of donor/NFA/NFA. This strategy offers an easy approach to balance the V OC and J SC in tandem OPVs toward higher power conversion efficiency (PCE) without rational and careful synthesis of new materials. Tandem OPVs based on mixed NFAs in rear sub-cells exhibited the best PCE of 13.3% in the lab. Importantly, the tandem devices were certified by the National Renewable Energy Laboratory (NREL) under asymptotic scans, and a PCE of 11.52% was achieved and recognized on the most recent NREL chart. Organic photovoltaics (OPVs) have attracted considerable attention in the last decade due to some potential advantages, such as flexibility, light weight, possible semi-transparency, and fast large-area fabrication with low energy consumption. To achieve higher performing OPVs, a tandem structure was invented by stacking two or more sub-cells together. In tandem OPVs, the photon utilization efficiency can be improved and the thermal losses can be reduced. Herein, a simple strategy to balance the voltage-current trade-off in tandem OPVs by employing mixed non-fullerene acceptors in rear sub-cells is reported. By this strategy, tandem OPVs exhibited the best power conversion efficiency (PCE) of 13.3% in the lab. Importantly, the tandem devices were certified by the National Renewable Energy Laboratory (NREL) under the new protocols (asymptotic scans), and a PCE of 11.52% was achieved and recognized on the most recent NREL chart. A simple strategy to balance the voltage-current trade-off in tandem organic photovoltaics by employing mixed non-fullerene acceptors in rear sub-cells is reported. The tandem device with the best power conversion efficiency (PCE) of 13.3% was achieved in the lab. Importantly, the tandem devices were certified by the National Renewable Energy Laboratory (NREL) under the new protocols (asymptotic scans, which are much tougher than regular fast scans); a PCE of 11.52% was achieved and recognized on the most recent NREL chart.

Abstract Many datasets are being produced by consortia that seek to characterize healthy and disease tissues at single-cell resolution. While biospecimen and experimental information is often captured, detailed metadata standards related to data matrices and analysis workflows are currently lacking. To address this, we develop the matrix and analysis metadata standards (MAMS) to serve as a resource for data centers, repositories, and tool developers. We define metadata fields for matrices and parameters commonly utilized in analytical workflows and developed the rmams package to extract MAMS from single-cell objects. Overall, MAMS promotes the harmonization, integration, and reproducibility of single-cell data across platforms.

Covert speech (CS) refers to speaking internally to oneself without producing any sound or movement. CS is involved in multiple cognitive functions and disorders. Reconstructing CS content by brain-computer interface (BCI) is also an emerging technique. However, it is still controversial whether CS is a truncated neural process of overt speech (OS) or involves independent patterns. Here, we performed a word-speaking experiment with simultaneous EEG-fMRI. It involved 32 participants, who generated words both overtly and covertly. By integrating spatial constraints from fMRI into EEG source localization, we precisely estimated the spatiotemporal dynamics of neural activity. During CS, EEG source activity was localized in three regions: the left precentral gyrus, the left supplementary motor area, and the left putamen. Although OS involved more brain regions with stronger activations, CS was characterized by an earlier event-locked activation in the left putamen (peak at 262 ms versus 1170 ms). The left putamen was also identified as the only hub node within the functional connectivity (FC) networks of both OS and CS, while showing weaker FC strength towards speech-related regions in the dominant hemisphere during CS. Path analysis revealed significant multivariate associations, indicating an indirect association between the earlier activation in the left putamen and CS, which was mediated by reduced FC towards speech-related regions. These findings revealed the specific spatiotemporal dynamics of CS, offering insights into CS mechanisms that are potentially relevant for future treatment of self-regulation deficits, speech disorders, and development of BCI speech applications.

This paper studies how the GeoGebra 3D Calculator with augmented reality (AR) serves as a tool for visualizing 3D graphs from functions of two variables in a mid-sized multivariable calculus class. We assessed this AR tool’s usability as a content delivery system. In our study, 39 students in the AR group received instructions on using the GeoGebra 3D Calculator with AR tool, while another 28 students in the control group worked exclusively with PowerPoint slides. Statistical testing reveals that the GeoGebra 3D Calculator with AR proves more effective than PowerPoint slides in terms of usability for teaching and learning multivariable calculus. However, the students’ attitudes and engagement do not show significant differences between the AR and control groups. This preliminary study highlights the crucial role of innovative educational technologies like the GeoGebra 3D Calculator with AR in enhancing the visualization of 3D graphs and other multivariable calculus topics. It suggests an advancement in the evolution of digital tools in education. The increased usability observed in the AR group indicates a promising direction for future educational strategies, especially in fields that require strong spatial visualization skills.

The Point Intercept Transect (PIT) method has commonly been used in recent decades for estimating the status of coral reef benthic communities. It is a simple method that is efficiently performed underwater, as benthic components are recorded only as presence or absence at specific interval points along transects. Therefore, PIT is also popular in citizen science activities such as Reef Check programs. Longer intervals are commonly associated with longer transects, yet sampling interval length can significantly influence benthic coverage calculations. Despite this, the relative accuracy of longer or shorter intervals related to transect length has not been tested for PIT. In this study, we tested the optimum intervals of PIT for several commonly used transect lengths using the bootstrap method on empirical data collected on tropical coral reefs and non-reefal coral communities. Our results recommend fine intervals of 10 cm or shorter, depending on the length of the transect, to increase the accuracy of estimating benthic community status on coral reefs. Permanent transects should also be considered in long-term monitoring programs to improve data quality.

Magnetoencephalography (MEG) plays a pivotal role in the diagnosis of brain disorders. In this review, we have investigated potential MEG applications for analysing brain disorders. The signal-to-noise ratio (SNRMEG = 2.2 db, SNREEG < 1 db) and spatial resolution (SRMEG = 2–3 mm, SREEG = 7–10 mm) is higher for MEG than EEG, thus MEG potentially facilitates accurate monitoring of cortical activity. We found that the direct electrophysiological MEG signals reflected the physiological status of neurological disorders and play a vital role in disease diagnosis. Single-channel connectivity, as well as brain network analysis, using MEG data acquired during resting state and a given task has been used for the diagnosis of neurological disorders such as epilepsy, Alzheimer’s, Parkinsonism, autism, and schizophrenia. The workflow of MEG and its potential applications in the diagnosis of disease and therapeutic planning are also discussed. We forecast that computer-aided algorithms will play a prominent role in the diagnosis and prediction of neurological diseases in the future. The outcome of this narrative review will aid researchers to utilise MEG in diagnostics.

The effects of alkaline copper quaternary (ACQ) and zinc borate (ZB) on the resistance of corn stalk fiber (CSF)-reinforced high-density polyethylene (HDPE) composites to biodegradation were examined. Both biocides could inhibit termites, mold fungi, and wood-decay fungi, even at high CSF formulations (i.e., 60%). Additionally, ACQ enhanced the resistance of the composite materials to certain biotic stresses better than ZB. The CSF/HDPE composites treated with ACQ at the 3.0% level exhibited a superior performance against termites, white rot fungi, and brown rot fungi. ACQ treatment at the 1% level was optimal for inhibiting soft rot fungi. Furthermore, mold growth was not observed on ACQ-treated CSF/HDPE samples. The untreated CSF/HDPE composites were more susceptible to mold infections and decay than the untreated poplar/HDPE composites, likely because of an incomplete removal of the pith. The chemical features of the corn stalk may also have influenced these differences, but this possibility will need to be explored in future investigations. Furthermore, the CSF component of CSF/HDPE composites is highly susceptible to fungal attacks, with the soft rot fungus inducing the largest mass losses, followed by the white rot fungus, and then the brown rot fungus.

We construct nonlinear extensions of Dirac's relativistic electron equation that preserve its other desirable properties such as locality, separability, conservation of probability and Poincaré invariance. We determine the constraints that the nonlinear term must obey and classify the resultant non-polynomial nonlinearities in a double expansion in the degree of nonlinearity and number of derivatives. We give explicit examples of such nonlinear equations, studying their discrete symmetries and other properties. Motivated by some previously suggested applications we then consider nonlinear terms that simultaneously violate Lorentz covariance and again study various explicit examples. We contrast our equations and construction procedure with others in the literature and also show that our equations are not gauge equivalent to the linear Dirac equation. Finally we outline various physical applications for these equations.

Magnesium (Mg) plays a pivotal role as an essential component of plant chlorophyll and functions as a critical coenzyme. However, research exploring the regulatory mechanisms of magnesium ions on the synthesis of secondary metabolites is still in its early stages. Sophora tonkinensis is a widely utilized medicinal plant in China, recognized for its diverse secondary metabolites with active properties. This study investigates variations in these ingredients in tissue-cultured seedlings under varying magnesium concentrations. Simultaneously, an omics data analysis was conducted on tissue-cultured seedlings subjected to treatments with magnesium and low magnesium. These comprehensive omics analyses aimed to elucidate the mechanisms through which magnesium influences active components, growth, and development. Magnesium exerts a pervasive influence on various metabolic pathways, forming an intricate network. Research findings indicate that magnesium impacts diverse metabolic processes, including the absorption of potassium and calcium, as well as photosynthetic activity. Consequently, these influences lead to discernible changes in the levels of pharmacologically active compounds and the growth and developmental status.This study is the first to employ a multi-omics data analysis in S. tonkinensis. This methodology allows us to uncover the overarching impact of metabolic networks on the levels of various active ingredients and specific phenotypes., (© 2024. The Author(s).)

Meiotic recombination is a prominent force shaping genome evolution, and understanding the causes for varying recombination landscapes within and between species has remained a central, though challenging, question. Recombination rates are widely observed to negatively associate with the abundance of transposable elements (TEs), selfish genetic elements that move between genomic locations. While such associations are usually interpreted as recombination influencing the efficacy of selection at removing TEs, accumulating findings suggest that TEs could instead be the cause rather than the consequence. To test this prediction, we formally investigated the influence of polymorphic, putatively active TEs on recombination rates. We developed and benchmarked a novel approach that uses PacBio long-read sequencing to efficiently, accurately, and cost-effectively identify crossovers (COs), a key recombination product, among large numbers of pooled recombinant individuals. By applying this approach to Drosophila strains with distinct TE insertion profiles, we found that polymorphic TEs, especially RNA-based TEs and TEs with local enrichment of repressive marks, reduce the occurrence of COs. Such an effect leads to different CO frequencies between homologous sequences with and without TEs, contributing to varying CO maps between individuals. The suppressive effect of TEs on CO is further supported by two orthogonal approaches-analyzing the distributions of COs in panels of recombinant inbred lines in relation to TE polymorphism and applying marker-assisted estimations of CO frequencies to isogenic strains with and without transgenically inserted TEs. Our investigations reveal how the constantly changing mobilome can actively modify recombination landscapes, shaping genome evolution within and between species.

In pursuing high stability and power conversion efficiency for organic photovoltaics (OPVs), a sequential deposition (SD) approach to fabricate active layers with p-i-n structures (where p, i, and n represent the electron donor, mixed donor:acceptor, and electron acceptor regions, respectively, distinctively different from the bulk heterojunction (BHJ) structure) has emerged. Here, we present a novel approach that by incorporating two polymer donors, PBDBT-DTBT and PTQ-2F , and one small-molecule acceptor, BTP-3-EH-4Cl , into the active layer with sequential deposition, we formed a device with nanometer-scale twin p-i-n structured active layer. The twin p-i-n PBDBT-DTBT:PTQ-2F/BTP-3-EH-4Cl device involved first depositing a PBDBT-DTBT:PTQ-2F blend under layer and then a BTP-3-EH-4Cl top layer and exhibited an improved power conversion efficiency (PCE) value of 18.6%, as compared to the 16.4% for the control BHJ PBDBT-DTBT:PTQ-2F:BTP-3-EH-4Cl device or 16.6% for the single p-i-n PBDBT-DTBT/BTP-3-EH-4Cl device. The PCE enhancement resulted mainly from the twin p-i-n active layer's multiple nanoscale charge carrier pathways that contributed to an improved fill factor and faster photocurrent generation based on transient absorption studies. The PBDBT-DTBT:PTQ-2F/BTP-3-EH-4Cl film possessed a vertical twin p-i-n morphology that was revealed through secondary ion mass spectrometry and synchrotron grazing-incidence small-angle X-ray scattering analyses. The thermal stability ( T 80 ) at 85 °C of the twin p-i-n PBDBT-DTBT:PTQ-2F/BTP-3-EH-4Cl device surpassed that of the single p-i-n PBDBT-DTBT/BTP-3-EH-4Cl devices (906 vs 196 h). This approach of providing a twin p-i-n structure in the active layer can lead to substantial enhancements in both the PCE and stability of organic photovoltaics, laying a solid foundation for future commercialization of the organic photovoltaics technology.

Transposable elements (TEs) are genomic parasites found in nearly all eukaryotes, including humans. This evolutionary success of TEs is due to their replicative activity, involving insertion into new genomic locations. TE activity varies at multiple levels, from between taxa to within individuals. The rapidly accumulating evidence of the influence of TE activity on human health, as well as the rapid growth of new tools to study it, motivated an evaluation of what we know about TE activity thus far. Here, we discuss why TE activity varies, and the consequences of this variation, from an evolutionary perspective. By studying TE activity in nonhuman organisms in the context of evolutionary theories, we can shed light on the factors that affect TE activity. While the consequences of TE activity are usually deleterious, some have lasting evolutionary impacts by conferring benefits on the host or affecting other evolutionary processes.

Long-read sequencing is driving rapid progress in genome assembly across all major groups of life, including species of the family Drosophilidae, a longtime model system for genetics, genomics, and evolution. We previously developed a cost-effective hybrid Oxford Nanopore (ONT) long-read and Illumina short-read sequencing approach and used it to assemble 101 drosophilid genomes from laboratory cultures, greatly increasing the number of genome assemblies for this taxonomic group. The next major challenge is to address the laboratory culture bias in taxon sampling by sequencing genomes of species that cannot easily be reared in the lab. Here, we build upon our previous methods to perform amplification-free ONT sequencing of single wild flies obtained either directly from the field or from ethanol-preserved specimens in museum collections, greatly improving the representation of lesser studied drosophilid taxa in whole-genome data. Using Illumina Novaseq X Plus and ONT P2 sequencers with R10.4.1 chemistry, we set a new benchmark for inexpensive hybrid genome assembly at US $150 per genome while assembling genomes from as little as 35 ng of genomic DNA from a single fly. We present 183 new genome assemblies for 179 species as a resource for drosophilid systematics, phylogenetics, and comparative genomics. Of these genomes, 62 are from pooled lab strains and 121 from single adult flies. Despite the sample limitations of working with small insects, most single-fly diploid assemblies are comparable in contiguity (>1 Mb contig N50), completeness (>98% complete dipteran BUSCOs), and accuracy (>QV40 genome-wide with ONT R10.4.1) to assemblies from inbred lines. We present a well-resolved multi-locus phylogeny for 360 drosophilid and 4 outgroup species encompassing all publicly available (as of August 2023) genomes for this group. Finally, we present a Progressive Cactus whole-genome, reference-free alignment built from a subset of 298 suitably high-quality drosophilid genomes. The new assemblies and alignment, along with updated laboratory protocols and computational pipelines, are released as an open resource and as a tool for studying evolution at the scale of an entire insect family., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Kim et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Host reproduction can be manipulated by bacterial symbionts in various ways. Parthenogenesis induction is the most effective type of reproduction manipulation by symbionts for their transmission. Insect sex is determined by regulation of doublesex (dsx) splicing through transformer2 (tra2) and transformer (tra) interaction. Although parthenogenesis induction by symbionts has been studied since the 1970s, its underlying molecular mechanism is unknown. Here we identify a Wolbachia parthenogenesis-induction feminization factor gene (piff) that targets sex-determining genes and causes female-producing parthenogenesis in the haplodiploid parasitoid Encarsia formosa. We found that Wolbachia elimination repressed expression of female-specific dsx and enhanced expression of male-specific dsx, which led to the production of wasp haploid male offspring. Furthermore, we found that E. formosa tra is truncated and non-functional, and Wolbachia has a functional tra homolog, termed piff, with an insect origin. Wolbachia PIFF can colocalize and interact with wasp TRA2. Moreover, Wolbachia piff has coordinated expression with tra2 and dsx of E. formosa. Our results demonstrate the bacterial symbiont Wolbachia has acquired an insect gene to manipulate the host sex determination cascade and induce parthenogenesis in wasps. This study reveals insect-to-bacteria horizontal gene transfer drives the evolution of animal sex determination systems, elucidating a striking mechanism of insect-microbe symbiosis., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Although sex chromosomes have evolved from autosomes, they often have unusual regulatory regimes that are sex- and cell-type-specific such as dosage compensation (DC) and meiotic sex chromosome inactivation (MSCI). The molecular mechanisms and evolutionary forces driving these unique transcriptional programs are critical for genome evolution but have been, in the case of MSCI in Drosophila, subject to continuous debate. Here, we take advantage of the younger sex chromosomes in D. miranda (XR and the neo-X) to infer how former autosomes acquire sex-chromosome-specific regulatory programs using single-cell and bulk RNA sequencing and ribosome profiling, in a comparative evolutionary context. We show that contrary to mammals and worms, the X down-regulation through germline progression is most consistent with the shutdown of DC instead of MSCI, resulting in half gene dosage at the end of meiosis for all 3 X's. Moreover, lowly expressed germline and meiotic genes on the neo-X are ancestrally lowly expressed, instead of acquired suppression after sex linkage. For the young neo-X, DC is incomplete across all tissue and cell types and this dosage imbalance is rescued by contributions from Y-linked gametologs which produce transcripts that are translated to compensate both gene and protein dosage. We find an excess of previously autosomal testis genes becoming Y-specific, showing that the neo-Y and its masculinization likely resolve sexual antagonism. Multicopy neo-sex genes are predominantly expressed during meiotic stages of spermatogenesis, consistent with their amplification being driven to interfere with mendelian segregation. Altogether, this study reveals germline regulation of evolving sex chromosomes and elucidates the consequences these unique regulatory mechanisms have on the evolution of sex chromosome architecture., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Wei et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Surfactants can transfer non-aqueous phase liquid (NAPL) contaminants to the aqueous phase, and enhance the removal of the latter in groundwater. However, the extensive use of surfactants causes secondary contamination and increases the non-target consumption of oxidants. It is pressing to develop a surfactant with high phase transfer efficiency and sound compatibility with oxidants to minimize the use of surfactants for groundwater remediation. The phase transfer capability of different surfactants and their binary mixtures, their enhanced KMnO 4 oxidation performance for NAPL contaminants as well as influencing factors were investigated to solve the above-mentioned question. The results showed that Tween20, SDBS and BS-12 perform best in terms of phase transfer capability among nonionic, anionic and amphoteric surfactants respectively, and only SDBS and BS-12 produce a synergistic effect among the binary mixtures. The CMC of SDBS/BS-12 was lower than its ideal CMC value, and the self-assembly process of SDBS/BS-12 also formed larger aggregates, which improved the phase transfer performance. Compared to other single surfactants, the removal efficiency of petroleum hydrocarbons in the aquifer sediments was raised by 7.4-33.8 % using the mixed surfactant. The SDBS/BS-12 mixture was compatible with KMnO 4 and boosted the reaction of NAPL contaminants with KMnO 4 by transferring from the NAPL phase to the aqueous phase. As a result, the NAPL toluene and phenanthrene removal efficiency increased from 37 % and 29 % to 80 % and 86 % respectively. Natural organic matters inhibited the phase transfer efficiency of the SDBS/BS-12 mixture, whereas anions and monovalent cations enhanced the phase transfer capability of the mixture. High-valent cations led to precipitation in the SDBS/BS-12, which could be eliminated by adding Na 2 Si 2 O 5 . The SDBS/BS-12 mixture delivered the same phase transfer efficiency with the dosage of 1.73-23.07 % of other single surfactants, and its cost was equivalent to 0.25-41.7 % of the latter, thus embracing bright application prospects., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Excessive Cd accumulation in soil reduces the production of numerous plants, such as Sophora tonkinensis Gagnep., which is an important and widely cultivated medicinal plant whose roots and rhizomes are used in traditional Chinese medicine. Applying a mixture of biochar and organic fertilizers improved the overall health of the Cd-contaminated soil and increased the yield and quality of Sophora . However, the underlying mechanism between this mixed fertilization and the improvement of the yield and quality of Sophora remains uncovered. This study investigated the effect of biochar and organic fertilizer application (BO, biochar to organic fertilizer ratio of 1:2) on the growth of Sophora cultivated in Cd-contaminated soil. BO significantly reduced the total Cd content (TCd) in the Sophora rhizosphere soil and increased the soil water content, overall soil nutrient levels, and enzyme activities in the soil. Additionally, the α diversity of the soil bacterial community had been significantly improved after BO treatment. Soil pH, total Cd content, total carbon content, and dissolved organic carbon were the main reasons for the fluctuation of the bacterial dominant species. Further investigation demonstrated that the abundance of variable microorganisms, including Acidobacteria, Proteobacteria, Bacteroidetes, Firmicutes, Chloroflexi, Gemmatimonadetes, Patescibacteria, Armatimonadetes, Subgroups&#95; 6, Bacillus and Bacillus&#95; Acidiceler , was also significantly changed in Cd-contaminated soil. All these alterations could contribute to the reduction of the Cd content and, thus, the increase of the biomass and the content of the main secondary metabolites (matrine and oxymatrine) in Sophora . Our research demonstrated that the co-application of biochar and organic fertilizer has the potential to enhance soil health and increase the productivity and quality of plants by regulating the microorganisms in Cd-contaminated soil., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Liu, Li, Lin, Chen, Zhang, Wei and Lei.)

Herein, it is found that 3D transition metal dichalcogenide (TMD)-MoS 2 nanoflowers-grown on 2D tungsten oxide-anchored graphene nanosheets (MoS 2 @W-G) functions as a superior catalyst for the hydrogen evolution reaction (HER) under both acidic and alkaline conditions. The optimized weight ratio of MoS 2 @W-G (MoS 2 :W-G/1.5:1) in 0.5 M H 2 SO 4 achieves a low overpotential of 78 mV at 10 mA cm -2 , a small Tafel slope of 48 mV dec -1 , and a high exchange current density (0.321 mA cm⁻ 2 ). Furthermore, the same MoS 2 @W-G composite exhibits stable HER performance when using real seawater, with Faradaic efficiencies of 96 and 94% in acidic and alkaline media, respectively. Density functional theory calculations based on the hybrid MoS 2 @W-G structure model confirm that suitable hybridization of 3D MoS 2 and 2D W-G nanosheets can lower the hydrogen adsorption: Gibbs free energy (∆G H* ) from 1.89 eV for MoS 2 to -0.13 eV for the MoS 2 @W-G composite. The excellent HER activity of the 3D/2D hybridized MoS 2 @W-G composite arises from abundance of active heterostructure interfaces, optimizing the electrical configuration, thereby accelerating the adsorption and dissociation of H 2 O. These findings suggest a new approach for the rational development of alternative 3D/2D TMD/graphene electrocatalysts for HER applications using seawater., (© 2023 Wiley-VCH GmbH.)

Teleost fishes, which are the largest and most diverse group of living vertebrates, have a rich history of ancient and recent polyploidy. Previous studies of allotetraploid common carp and goldfish (cyprinids) reported a dominant subgenome, which is more expressed and exhibits biased gene retention. However, the underlying mechanisms contributing to observed 'subgenome dominance' remains poorly understood. Here we report high-quality genomes of twenty-one cyprinids to investigate the origin and subsequent subgenome evolution patterns following three independent allopolyploidy events. We identify the closest extant relatives of the diploid progenitor species, investigate genetic and epigenetic differences among subgenomes, and conclude that observed subgenome dominance patterns are likely due to a combination of maternal dominance and transposable element densities in each polyploid. These findings provide an important foundation to understanding subgenome dominance patterns observed in teleost fishes, and ultimately the role of polyploidy in contributing to evolutionary innovations., (© 2023. The Author(s).)

In this study, we synthesized a series of four large-band gap small molecule acceptors with side-chain engineering of the dithieno-pyrrolo-fused pentacyclic benzotriazole (BZTTP or Y1 core) or the fused-ring dithienothiophene-pyrrolobenzothiadiazole (TPBT or Y6 core) with difluoro-indene-dione (IO2F) or dichloro-indene-dione (IO2Cl) end groups to form Y1-IO2F, Y1-IO2Cl, Y6-IO2F, and Y6-IO2Cl acceptors, respectively, for blending with poly(3-hexyl thiophene) (P3HT) for bulk heterojunction organic photovoltaics. The complementary UV-vis absorption spectra of these small molecules and P3HT along with their offset energy bands allow broad absorption and effective electron transfer. Through synchrotron wide-angle X-ray scattering (WAXS) analyses and contact angle measurements, we found that the blend of the small molecule Y6-IO2F (having a TPBT core) and P3HT achieves an optimum morphology that balances their crystallinity and miscibility, among those of these four blends, leading to a substantial enhancement in the short-circuit current density and thus power conversion efficiency (PCE) in their devices. For example, the P3HT:Y6-IO2F (w/w: 1/1.2) device exhibited a champion PCE of 10.5% with a short current density ( J sc ) value of 15.9 mA/cm 2 as compared to the P3HT:Y1-IO2F device having a PCE of 2.2% with a J sc value of 5.7 mA/cm 2 because of the higher Y6-IO2F (with TPBT core) molecular packing that facilitated carrier transport in the devices. The enhanced thermal stability exhibited by the devices incorporating Y6-IO2F and Y6-IO2Cl, as compared to that of Y1-IO2F and Y1-IO2Cl devices, is also due to the more planar TPBT core structure, while the photostability of devices incorporating Y6-IO2Cl and Y1-IO2Cl is better than that of devices incorporating Y6-IO2F and Y1-IO2F, owing to more photostable chemical structures. These results present an outstanding performance for P3HT-based organic solar cells. Moreover, these small molecule blends are processed with an environmentally friendly solvent tetrahydrofuran, demonstrating both the sustainability and commercial viability of these types of organic photovoltaics.

Zebrafish exhibit a robust ability to regenerate their hearts following injury, and the immune system plays a key role in this process. We previously showed that delaying macrophage recruitment by clodronate liposome (-1d&#95;CL, macrophage-delayed model) impairs neutrophil resolution and heart regeneration, even when the infiltrating macrophage number was restored within the first week post injury (Lai et al., 2017). It is thus intriguing to learn the regenerative macrophage property by comparing these late macrophages vs. control macrophages during cardiac repair. Here, we further investigate the mechanistic insights of heart regeneration by comparing the non-regenerative macrophage-delayed model with regenerative controls. Temporal RNAseq analyses revealed that -1d&#95;CL treatment led to disrupted inflammatory resolution, reactive oxygen species homeostasis, and energy metabolism during cardiac repair. Comparative single-cell RNAseq profiling of inflammatory cells from regenerative vs. non-regenerative hearts further identified heterogeneous macrophages and neutrophils, showing alternative activation and cellular crosstalk leading to neutrophil retention and chronic inflammation. Among macrophages, two residential subpopulations ( hbaa + Mac and timp4.3 + Mac 3) were enriched only in regenerative hearts and barely recovered after +1d&#95;CL treatment. To deplete the resident macrophage without delaying the circulating macrophage recruitment, we established the resident macrophage-deficient model by administrating CL earlier at 8 d (-8d&#95;CL) before cryoinjury. Strikingly, resident macrophage-deficient zebrafish still exhibited defects in revascularization, cardiomyocyte survival, debris clearance, and extracellular matrix remodeling/scar resolution without functional compensation from the circulating/monocyte-derived macrophages. Our results characterized the diverse function and interaction between inflammatory cells and identified unique resident macrophages prerequisite for zebrafish heart regeneration., Competing Interests: KW, IL, KC, KL, KL, TK, YC, KY, SL No competing interests declared, (© 2023, Wei et al.)

Peptide is a compound consisting of 2-50 amino acids, which is intermediate between small molecule and protein. It is characterized by a variety of biological activities, easy absorption, strong specific targeting, and few side effects and has become one of the hotspots in biomedical research in recent years. Chinese medicine contains a large number of peptides. The traditional processing methods such as decocting and boiling can effectively boost peptides to exert their due biological activities. At present, however, the research on Chinese medicinal components in laboratory generally employs high-concentration alcohol extraction method, which may cause the peptides to be ignored in many natural Chinese medicines. Substantial studies have revealed that the peptides in Chinese medicine are important material basis responsible for the traditional efficacy. Based on years of research and literature retrieval, this study put forward the concept of &quot;traditional Chinese medicine(TCM)-peptides&quot;, referring to the components consisting of two or more amino acids with molecular weight between small molecules and proteins that can express the efficacy of Chinese medicine. Furthermore, this study also summarized the extraction and separation of TCM-peptides, and structure determination methods and routes, predicted the research prospect of modern research methods of TCM-peptides based on &quot;holistic view&quot; and big data. The artificial intelligence prediction was combined with high-throughput screening technology to improve the discovery efficiency and accuracy of TCM-peptides, and holographic images between TCM-peptides and biological targets were established to provide references for the innovative drug design and related health product development of TCM-peptides based on TCM theories.

A chitosan composite with a vertical array of pore channels is fabricated via an electrophoretic deposition (EPD) technique. The composite consists of chitosan and polyethylene glycol, as well as nanoparticles of silver oxide and silver. The formation of hydrogen bubbles during EPD renders a localized increase of hydroxyl ions that engenders the precipitation of chitosan. In addition, chemical interactions among the constituents facilitate the establishment of vertical channels occupied by hydrogen bubbles that leads to the unique honeycomb-like microstructure; a composite with a porosity of 84%, channel diameter of 488 µm, and channel length of 2 mm. The chitosan composite demonstrates an impressive water uptake of 2100% and a two-stage slow release of silver. In mass transport analysis, both Disperse Red 13 and ZnO powders show a much enhanced transport rate over that of commercial gauze. Due to its excellent structural integrity and channel independence, the chitosan composite is evaluated in a passive suction mode for an adhesive force of 9.8 N (0.56 N cm -2 ). The chitosan composite is flexible and is able to maintain sufficient adhesive force toward objects with different surface curvatures., (© 2022 The Authors. Advanced Science published by Wiley-VCH GmbH.)

High-performance porous 3D graphene-based supercapacitors are one of the most promising and challenging directions for future energy technologies. Microporous graphene has been synthesized by the pyrolysis method. The fabricated lightweight graphene with a few layers (FLG) has an ultra-high surface area of 2266 m 2 g -1 along with various-sized micropores. The defect-induced morphology and pore size distribution of the fabricated graphene are examined, and the results show that the micropores vary from 0.85 to 1.9 nm and the 1.02 nm pores contribute 30% of the total surface area. The electrochemical behaviour of the electrode fabricated using this graphene has been studied with various concentrations of the KOH electrolyte. The highest specific capacitance of the graphene electrode of 540 F g -1 (close to the theoretical value, ∼550 F g -1 ) can be achieved by using the 1 M KOH electrolyte. This high specific capacitance contribution involves the counter ion adsorption, co-ion desorption, and ion permutation mechanisms. The formation of a Helmholtz layer, as well as the diffusion of the electrolyte ions, confirms this phenomenon. The symmetrical solid-state supercapacitor fabricated with the graphene electrodes and PVA-KOH gel as the electrolyte exhibits excellent energy and power densities of 18 W h kg -1 and 10.2 kW kg -1 , respectively. This supercapacitor also shows a superior 100% coulombic efficiency after 6000 cycles., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

In this study, we synthesized four new A-DA'D-A acceptors (where A and D represent acceptor and donor chemical units) incorporating perylene diimide units (A') as their core structures and presenting various modes of halogenation and substitution of the functional groups at their end groups (A). In these acceptors, by fusing dithiophenepyrrole (DTP) moieties (D) to the helical perylene diimide dimer (hPDI) to form fused-hPDI (FhPDI) cores, we could increase the D/A' oscillator strength in the cores and, thus, the intensity of intramolecular charge transfer (ICT), thereby enhancing the intensity of the absorption bands. With four different end group units─IC2F, IC2Cl, IO2F, and IO2Cl─tested, each of these acceptor molecules exhibited different optical characteristics. Among all of these systems, the organic photovoltaic device incorporating the polymer PCE10 blended with the acceptor FhPDI-IC2F (1:1.1 wt %) had the highest power conversion efficiency (PCE) of 9.0%; the optimal PCEs of PCE10:FhPDI-IO2F, PCE10:FhPDI-IO2Cl, and PCE10:FhPDI-IC2Cl (1:1.1 wt %) devices were 5.2, 4.7, and 7.7%, respectively. The relatively high PCE of the PCE10:FhPDI-IC2F device resulted primarily from the higher absorption coefficients of the FhPDI-IC2F acceptor, lower energy loss, and more efficient charge transfer; the FhPDI-IC2F system experienced a lower degree of geminate recombination─as a result of improved delocalization of π-electrons along the acceptor unit─relative to that of the other three acceptors systems. Thus, altering the end groups of multichromophoric PDI units can increase the PCEs of devices incorporating PDI-derived materials and might also be a new pathway for the creation of other valuable fused-ring derivatives.

Accidental oil leaks and spills can often result in severe soil and groundwater pollution. In situ chemical oxidation (ISCO) is a powerful and efficient remediation technology. In this review, the applications and recent advances of three commonly applied in-situ oxidants (hydrogen peroxide, persulfate, and permanganate), and the gap in remediation efficiency between lab-scale and field-scale applications is critically assessed. Feasible improvements for these measures, especially solutions for the 'rebound effect', are discussed. The removal efficiencies reported in 108 research articles related to petroleum-contaminated soil and groundwater were analyzed. The average remediation efficiency of groundwater (82.7%) by the three oxidants was higher than that of soil (65.8%). A number of factors, including non-aqueous phase liquids, adsorption effect, the aging process of contaminants, low-permeability zones, and vapor migration resulted in a decrease in the remediation efficiency and caused the residual contaminants to rebound from 19.1% of the original content to 57.7%. However, the average remediation efficiency of ISCO can be increased from 40.9% to 75.5% when combined with other techniques. In the future, improving the utilization efficiency of reactive species and enhancing the contact efficiency between oxidants and petroleum contaminants will be worthy of attention. Multi-technical combinations, such as the ISCO coupled with phase-transfer, viscosity control, controlled release or natural attenuation, can be effective methods to solve the rebound problem., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Sex chromosomes play a special role in the evolution of reproductive barriers between species. Here we describe conflicting roles of nascent sex chromosomes on patterns of introgression in an experimental hybrid swarm. Drosophila nasuta and Drosophila albomicans are recently diverged, fully fertile sister species that have different sex chromosome systems. The fusion between an autosome (Muller CD) with the ancestral X and Y gave rise to neo-sex chromosomes in D. albomicans, while Muller CD remains unfused in D. nasuta. We found that a large block containing overlapping inversions on the neo-sex chromosome stood out as the strongest barrier to introgression. Intriguingly, the neo-sex chromosome introgression barrier is asymmetrical and sex-dependent. Female hybrids showed significant D. albomicans–biased introgression on Muller CD (neo-X excess), while males showed heterosis with excessive (neo-X, D. nasuta Muller CD) genotypes. We used a population genetic model to dissect the interplay of sex chromosome drive, heterospecific pairing incompatibility between the neo-sex chromosomes and unfused Muller CD, neo-Y disadvantage, and neo-X advantage in generating the observed sex chromosome genotypes in females and males. We show that moderate neo-Y disadvantage and D. albomicans specific meiotic drive are required to observe female-specific D. albomicans–biased introgression in this system, together with pairing incompatibility and neo-X advantage. In conclusion, this hybrid swarm between a young species pair sheds light onto the multifaceted roles of neo-sex chromosomes in a sex-dependent asymmetrical introgression barrier at a species boundary.

Transposable element (TE) mobilization is a constant threat to genome integrity. Eukaryotic organisms have evolved robust defensive mechanisms to suppress their activity, yet TEs can escape suppression and proliferate, creating strong selective pressure for host defense to adapt. This genomic conflict fuels a never-ending arms race that drives the rapid evolution of TEs and recurrent positive selection of genes involved in host defense; the latter has been shown to contribute to postzygotic hybrid incompatibility. However, how TE proliferation impacts genome and regulatory divergence remains poorly understood. Here, we report the highly complete and contiguous (N50 = 33.8-38.0 Mb) genome assemblies of seven closely related Drosophila species that belong to the nasuta species group-a poorly studied group of flies that radiated in the last 2 My. We constructed a high-quality de novo TE library and gathered germline RNA-seq data, which allowed us to comprehensively annotate and compare TE insertion patterns between the species, and infer the evolutionary forces controlling their spread. We find a strong negative association between TE insertion frequency and expression of genes nearby; this likely reflects survivor bias from reduced fitness impact of TEs inserting near lowly expressed, nonessential genes, with limited TE-induced epigenetic silencing. Phylogenetic analyses of insertions of 147 TE families reveal that 53% of them show recent amplification in at least one species. The most highly amplified TE is a nonautonomous DNA element (Drosophila INterspersed Element; DINE) which has gone through multiple bouts of expansions with thousands of full-length copies littered throughout each genome. Across all TEs, we find that TEs expansions are significantly associated with high expression in the expanded species consistent with suppression escape. Thus, whereas horizontal transfer followed by the invasion of a naïve genome has been highlighted to explain the long-term survival of TEs, our analysis suggests that evasion of host suppression of resident TEs is a major strategy to persist over evolutionary times. Altogether, our results shed light on the heterogenous and context-dependent nature in which TEs affect gene regulation and the dynamics of rampant TE proliferation amidst a recently radiated species group., (© The Author(s) 2022. Published by Oxford University Press on behalf of Society for Molecular Biology and Evolution. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Here, we report the complete chloroplast genome of Scoparia dulcis L. The genome is 153,701 bp in size. Two inverted repeats (IRs) with a total of 50,546 bp were identified. The rest of the sequence was separated into two single-copy regions, including a large single-copy (LSC) region (85,029 bp) and a small single-copy (SSC) region (18,126 bp), respectively. The genome of S. dulcis comprised of 129 genes, including 85 protein-coding genes, 8 rRNA genes, and 36 tRNA genes. Phylogenetic analysis showed that S. dulcis was strongly allied with Bacopa monnieri., Competing Interests: No potential conflict of interest was reported by the authors., (© 2021 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.)

The complete chloroplast genome of Lonicera similis Hemsl. has been characterized by reference-based assembly using Illumina paired-end data. The circular complete cp genome is 155,463 bp in length, containing a large single copy (LSC) region of 89,282 bp, a small single copy (SSC) region of 18,661 bp, which are separated by a pair of inverted repeat (IR) regions of 23,760 bp. A total of 129 genes were predicted from the cp genome, including 83 protein-coding genes, 37 tRNA genes, and eight rRNA genes. Phylogenetic analysis reveals that L. similis is more closely related to Lonicera japonica Thunb. and Lonicera dasystyla Rehd. Our result will provide a reference for the phylogenetic relationship, plant identification and resource development and utilization of Lonicera species., Competing Interests: The authors declare that they have no competing interests., (© 2021 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.)

The fabrication with high energy density and superior electrical/electrochemical properties of hierarchical porous 3D cross-linked graphene-based supercapacitors is one of the most urgent challenges for developing high-power energy supplies. We facilely synthesized a simple, eco-friendly, cost-effective heteroatoms (nitrogen, phosphorus, and fluorine) co-doped graphene oxide (NPFG) reduced by hydrothermal functionalization and freeze-drying approach with high specific surface areas and hierarchical pore structures. The effect of different heteroatoms doping on the energy storage performance of the synthesized reduced graphene oxide is investigated extensively. The electrochemical analysis performed in a three-electrode system via cyclic voltammetry (CV), galvanostatic charging-discharging (GCD), and electrochemical impedance spectroscopy (EIS) demonstrates that the nitrogen, phosphorous, and fluorine co-doped graphene (NPFG-0.3) synthesized with the optimum amount of pentafluoropyridine and phytic acid (PA) exhibits a notably enhanced specific capacitance (319 F g -1 at 0.5 A g -1 ), good rate capability, short relaxation time constant ( τ = 28.4 ms), and higher diffusion coefficient of electrolytic cations (Dk + = 8.8261 × 10 -9 cm 2 s -1 ) in 6 M KOH aqueous electrolyte. The density functional theory (DFT) calculation result indicates that the N, F, and P atomic replacement within the rGO model could increase the energy value ( G T ) from -673.79 eV to -643.26 eV, demonstrating how the atomic level energy could improve the electrochemical reactivity with the electrolyte. The improved performance of NPFG-0.3 over NFG, PG, and pure rGO is mainly ascribed to the fast-kinetic process owing to the well-balanced electron/ion transport phenomenon. A symmetric coin cell supercapacitor device fabricated using NPFG-0.3 as the anode and cathode material with 6 M KOH aqueous electrolyte exhibits maximum specific energy of 38 W h kg -1 , a maximum specific power of 716 W kg -1 , and ∼88.2% capacitance retention after 10 000 cycles. The facile synthesis approach and promising electrochemical results suggest this synthesized NPFG-0.3 material has high potential for future supercapacitor application., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

In this study, we prepared organic photovoltaics (OPVs) featuring an active layer comprising double bulk heterojunction (BHJ) structures, featuring binary blends of a polymer donor and concentration gradients of two small-molecule acceptors. After forming the first BHJ structure by spin-coating, the second BHJ layer was transfer-printed onto the first using polydimethylsiloxane stamps. A specially designed selenium heterocyclic small-molecule acceptor (Y6-Se-4Cl) was employed as the second acceptor in the BHJ. X-ray photoelectron spectroscopy revealed that the two acceptors formed a gradient concentration profile across the active layer, thereby facilitating charge transportation. The best power conversion efficiencies (PCEs) for the double-BHJ-structured devices incorporating PM6:Y6-Se-4Cl/PM6:Y6 and PM6:Y6-Se-4Cl/PM6:IT-4Cl were 16.4 and 15.8%, respectively; these values were higher than those of devices having one-BHJ structures based on PM6:Y6-Se-4Cl (15.0%), PM6:Y6 (15.4%), and PM6:IT-4Cl (11.6%), presumably because of the favorable vertical concentration gradient of the selenium-containing small-molecule Y6-Se-4Cl in the active layer as well as some complementary light absorption. Thus, combining two BHJ structures with a concentration gradient of the two small-molecule acceptors can be an effective approach for enhancing the PCEs of OPVs.

Heterochromatin is a key architectural feature of eukaryotic genomes crucial for silencing of repetitive elements. During Drosophila embryonic cellularization, heterochromatin rapidly appears over repetitive sequences, but the molecular details of how heterochromatin is established are poorly understood. Here, we map the genome-wide distribution of H3K9me3-dependent heterochromatin in individual embryos of Drosophila miranda at precisely staged developmental time points. We find that canonical H3K9me3 enrichment is established prior to cellularization and matures into stable and broad heterochromatin domains through development. Intriguingly, initial nucleation sites of H3K9me3 enrichment appear as early as embryonic stage 3 over transposable elements (TEs) and progressively broaden, consistent with spreading to neighboring nucleosomes. The earliest nucleation sites are limited to specific regions of a small number of recently active retrotransposon families and often appear over promoter and 5' regions of LTR retrotransposons, while late nucleation sites develop broadly across the entirety of most TEs. Interestingly, early nucleating TEs are strongly associated with abundant maternal piRNAs and show early zygotic transcription. These results support a model of piRNA-associated co-transcriptional silencing while also suggesting additional mechanisms for site-restricted H3K9me3 nucleation at TEs in pre-cellular Drosophila embryos., Competing Interests: KW, CC, DB No competing interests declared, (© 2021, Wei et al.)

Postfabrication surface treatment strategies have been instrumental to the stability and performance improvements of halide perovskite photovoltaics in recent years. However, a consensus understanding of the complex reconstruction processes occurring at the surface is still lacking. Here, we combined complementary surface-sensitive and depth-resolved techniques to investigate the mechanistic reconstruction of the perovskite surface at the microscale level. We observed a reconstruction toward a more PbI 2 -rich top surface induced by the commonly used solvent isopropyl alcohol (IPA). We discuss several implications of this reconstruction on the surface thermodynamics and energetics. Particularly, our observations suggest that IPA assists in the adsorption process of organic ammonium salts to the surface to enhance their defect passivation effects.

In this paper, a universal approach toward constructing a new bilayer device architecture, a few-nanometer-thick third-component layer on a bulk-heterojunction (BHJ) binary blend layer, has been demonstrated in two different state-of-the-art organic photovoltaic (OPV) systems. Through a careful selection of a third component, the power conversion efficiency (PCE) of the device based on PM6/Y6/layered PTQ10 layered third-component structure was 16.8%, being higher than those of corresponding devices incorporating the PM6/Y6/PTQ10 BHJ ternary blend (16.1%) and the PM6/Y6 BHJ binary blend (15.5%). Also, the device featuring PM7/Y1-4F/layered PTQ10 layered third-component structure gave a PCE of 15.2%, which is higher than the PCEs of the devices incorporating the PM7/Y1-4F/PTQ10 BHJ ternary blend and the PM7/Y1-4F BHJ binary blend (14.2 and 14.0%, respectively). These enhancements in PCE based on layered third-component structure can be attributed to improvements in the charge separation and charge collection abilities. This simple concept of the layered third-component structure appears to have great promise for achieving high-performance OPVs.

Oil leakage, which is inevitable in the process of extraction, processing, transportation and storage, seriously undermines the soil and groundwater environment. Surfactants can facilitate the migration and solution of oil contaminants from nonaqueous phase liquid (NAPL) or solid phase to water by reducing the (air/water) surface tension, (oil/water) interfacial tension and micellar solubilization. They can effectively enhance the hydrodynamic driven remediation technologies by improving the contact efficiency of contaminants and liquid remediation agents or microorganism, and have been widely used to enhance the remediation of oil-contaminated sites. This paper summarizes the characteristics of different types of surfactants such as nonionic, anionic, biological and mixed surfactants, their enhancements to the remediation of oil-contaminated soil and groundwater, and examines the factors influencing surfactant performance. The causes of tailing and rebound effects and the role of surfactants in suppressing them are also discussed. Laboratory researches and actual site remediation practices have shown that various types of surfactants offer diverse options. Biosurfactants and mixed surfactants are superior and worth attention among the surfactants. Using surfactant foams, adding shear-thinning polymers, and combining surfactants with in-situ chemical oxidation are effective ways to resolve tailing and rebound effects. The adsorption of surfactants on soils and aquifer sediments decreases remediation efficiency and may cause secondary pollution, Therefore the adsorption loss should be noticed and minimized., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Recombination is the exchange of genetic material between homologous chromosomes via physical crossovers. High-throughput sequencing approaches detect crossovers genome wide to produce recombination rate maps but are difficult to scale as they require large numbers of recombinants individually sequenced. We present a simple and scalable pooled-sequencing approach to experimentally infer near chromosome-wide recombination rates by taking advantage of non-Mendelian allele frequency generated from a fitness differential at a locus under selection. As more crossovers decouple the selected locus from distal loci, the distorted allele frequency attenuates distally toward Mendelian and can be used to estimate the genetic distance. Here, we use marker selection to generate distorted allele frequency and theoretically derive the mathematical relationships between allele frequency attenuation, genetic distance, and recombination rate in marker-selected pools. We implemented nonlinear curve-fitting methods that robustly estimate the allele frequency decay from batch sequencing of pooled individuals and derive chromosome-wide genetic distance and recombination rates. Empirically, we show that marker-selected pools closely recapitulate genetic distances inferred from scoring recombinants. Using this method, we generated novel recombination rate maps of three wild-derived strains of Drosophila melanogaster, which strongly correlate with previous measurements. Moreover, we show that this approach can be extended to estimate chromosome-wide crossover interference with reciprocal marker selection and discuss how it can be applied in the absence of visible markers. Altogether, we find that our method is a simple and cost-effective approach to generate chromosome-wide recombination rate maps requiring only one or two libraries., (© The Author(s) 2020. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.)

In this report, we demonstrated that the incorporation of 15 wt % two-dimensional transition-metal dichalcogenide materials indium selenide (In 2 Se 3 ) nanosheets into a polymer (PM6)/small molecule (Y6) active layer not only increased its light absorption but also enhanced the long-term stability of the PM6/Y6/In 2 Se 3 ternary blend organic photovoltaic (OPV) devices. The power conversion efficiency (PCE) of the device was improved from 15.7 to 16.5% for the corresponding PM6/Y6 binary blend device. Moreover, the PM6/Y6/In 2 Se 3 device retained 80% of its initial PCE after thermal treatment at 100 °C for 600 h; in comparison, the binary blend device retained only 62% of its initial value. This relative enhancement of 29% resulted from the In 2 Se 3 nanosheets retarding or facilitating molecule packing in different orientations that stabilizes the morphology of the active layer. We adopted a modified kinetics model to account for the intrinsic degradation of the OPV; the degradation-facilitated energy for the degradation kinetics of the PCE for the ternary blend device was 5.3 kJ/mol, half of that (11.3 kJ/mol) of the binary blend device, indicating a slower degradation rate occurring for the case of incorporating In 2 Se 3 nanosheets. Therefore, the incorporation of transition metal dichalcogenide nanosheets having tunable band gaps and large asymmetric shape appears to be a new way to improve the long-term stability of devices and realize the practical use of OPVs.

Large portions of eukaryotic genomes consist of transposable elements (TEs), and the establishment of transcription-repressing heterochromatin during early development safeguards genome integrity in Drosophila. Repeat-rich Y chromosomes can act as reservoirs for TEs ('toxic' Y effect), and incomplete epigenomic defenses during early development can lead to deleterious TE mobilization. Here, we contrast the dynamics of early TE activation in two Drosophila species with vastly different Y chromosomes of different ages. Zygotic TE expression is elevated in male embryos relative to females in both species, mostly due to expression of Y-linked TEs. Interestingly, male-biased TE expression diminishes across development in D. pseudoobscura, but remains elevated in D. miranda, the species with the younger and larger Y chromosome. The repeat-rich Y of D. miranda still contains many actively transcribed genes, which compromise the formation of silencing heterochromatin. Elevated TE expression results in more de novo insertions of repeats in males compared to females. This lends support to the idea that the 'toxic' Y chromosome can create a mutational burden in males when genome-wide defense mechanisms are compromised, and suggests a previously unappreciated epigenetic conflict on evolving Y chromosomes between transcription of essential genes and silencing of selfish DNA.

Thanks to the nature of molecular orbitals, the absorption spectra of organic semiconductors are not continuous like those in traditional inorganic semiconductors, which offers a unique application of organic photovoltaics (OPVs): semitransparent OPVs. Recently, the exciting progress of materials design has promoted the development of semitransparent OPVs. However, in the perspective of device engineering, almost all reported works reduce the thickness of back/reflected electrode to obtain high average visible transmittance (AVT), which is a trade-off between power conversion efficiency (PCE) and the transmittance of the whole solar spectrum (visible and infrared), and therefore limit the further development. Herein, a unique strategy of "transparent hole-transporting frameworks" is proposed. A hole-transporting large-bandgap polymer (poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine (PTAA)) is employed to partially replace polymer donors in the active layer of PBDB-T/Y1. PTAA is a p-type polymer with a large bandgap of 2.9 eV; the partial substitution of PBDB-T by PTAA reduces the absorption of the active layer only in the visible region, keeping the hole-transporting pathways as well as the optimized film morphology. As a result, semitransparent OPVs with PCEs of 12% and AVTs of 20% are achieved, both on rigid and flexible substrates. To demonstrate the generality, this strategy is also used in three different active layers., (© 2020 Wiley-VCH GmbH.)

In this paper, an effective approach is demonstrated for the fabrication of IrO 2 -decorated polystyrene@functionalized polypyrrole (core@shell; PS@PPyNH 2 ) microspheres. The synthesis begins with the preparation of monodispersive PS microspheres with a diameter of 490 nm, by a process of emulsifier-free emulsion polymerization, followed by a copolymerization process involving pyrrole and PyNH 2 monomers in a PS microsphere aqueous suspension, to produce uniform PS@PPyNH 2 microspheres with a diameter of 536 nm. The loading of 2 nm IrO 2 nanoparticles onto the PS@PPyNH 2 microspheres can be easily adjusted by tuning the pH value of the IrO 2 colloidal solution and the PS@PPyNH 2 suspension. At pH 4, we successfully obtain IrO 2 -decorated PS@PPyNH 2 microspheres via electrostatic attraction and hydrogen bonding simultaneously between the negatively-charged IrO 2 nanoparticles and the positively-charged PS@PPyNH 2 microspheres. These IrO 2 -decorated PS@PPyNH 2 microspheres exhibit a characteristic cyclic voltammetric profile, similar to that of an IrO 2 thin film. The charge storage capacity is 5.19 mA cm -2 , a value almost five times greater than that of PS@PPyNH 2 microspheres. In addition, these IrO 2 -decorated PS@PPyNH 2 microspheres exhibit excellent cell viability and biocompatibility.

In tandem organic photovoltaics, the front subcell is based on large-bandgap materials, whereas the case of the rear subcell is more complicated. The rear subcell is generally composed of a narrow-bandgap acceptor for infrared absorption but a large-bandgap donor to realize a high open-circuit voltage. Unfortunately, most of the ultraviolet-visible part of the photons are absorbed by the front subcell; as a result, in the rear subcell, the number of excitons generated on large-bandgap donors will be reduced significantly. This reduces the (photo) conductivity and finally limits the hole-transporting property of the rear subcell. In this work, a simple and effective way is proposed to resolve this critical issue. To ensure sufficient photogenerated holes in the rear subcell, a small amount of an infrared-absorbing polymer donor as a third component is introduced, which provides a second hole-generation and transporting mechanism to minimize the aforementioned detrimental effects. Finally, the short-circuit current density of the two-terminal tandem organic photovoltaic is significantly enhanced from 10.3 to 11.7 mA cm -2 (while retaining the open-circuit voltage and fill factor) to result in an enhanced power conversion efficiency of 15.1%., (© 2020 Wiley-VCH GmbH.)

The uptake and distribution of four heavy metals, including copper (Cu), cadmium (Cd), lead (Pb) and zinc (Zn), and those of total phosphorus (TP) in 30 plants in North China were investigated through pot trial experiments. Accumulation and distribution of heavy metals or TP were associated with plant species, tissues, metal elements and pollutant loading. The highest amount of heavy metal and TP accumulation was found in the whole plants of Hylotelephium erythrostictum (Miq.) H. Ohba (C1) and Chlorophytum laxum R. Br. (L4), respectively. Considering the biological concentration factor, translocation factor, retention factor and biomass indices, C1 is the suitable plant for Cd and Cu uptake, whereas Hosta plantaginea (Lam.) Aschers (L3) and Viola verecunda A. Gray (V1) are the suitable plants for Pb removal. Rehmannia glutinosa (Gaetn.) Libosch. ex Fisch. (S1) and L4 can be chosen for Zn and TP removal, respectively. Cluster analysis was applied to select suitable plants for heavy metal and TP removal. Results showed that C1, L4 and Pennisetum alopecuroides (L.) Spreng (G1) have a good capability of accumulating heavy metals and TP. Results demonstrated that the plant species rather than the families considerably influenced the accumulation of pollutants.

Transparent flexible energy storage devices are considered as important chains in the next-generation, which are able to store and supply energy for electronic devices. Here, aluminum-doped zinc oxide (AZO) nanorods (NRs) and nickel oxide (NiO)-coated AZO NRs on muscovites are fabricated by a radio frequency (RF) magnetron sputtering deposition method. Interestingly, AZO NRs and AZO/NiO NRs are excellent electrodes for energy storage application with high optical transparency, high conductivity, large surface area, stability under compressive and tensile strain down to a bending radius of 5 mm with 1000 bending cycles. The obtained symmetric solid-state supercapacitors based on these electrodes exhibit good performance with a large areal specific capacitance of 3.4 mF cm -2 , long cycle life 1000 times, robust mechanical properties, and high chemical stability. Furthermore, an AZO/NiO//Zn battery based on these electrodes is demonstrated, yielding a discharge capacity of 195 mAh g -1 at a current rate of 8 A g -1 and a discharge capacity of over 1000 cycles with coulombic efficiency to 92%. These results deliver a concept of opening a new opportunity for future applications in transparent flexible energy storage., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

With the goal of obtaining sustainable earth-abundant electrocatalyst materials displaying high performance in the hydrogen evolution reaction (HER), here we propose a facile one-pot plasma-induced electrochemical process for the fabrication of new core-shell structures of ultrathin MoS 2 nanosheets engulfed within onion-like graphene nanosheets (OGNs@MoS 2 ). The resultant OGNs@MoS 2 structures not only increased the number of active sites of the semiconducting MoS 2 nanosheets but also enhanced their conductivity. Our OGNs@MoS 2 composites exhibited high HER performance, characterized by a low overpotential of 118 mV at a current density of 10 mA cm -2 , a Tafel slope of 73 mV dec -1 , and long-time stability of 10 5 s without degradation; this performance is much better than that of the sheet-like graphene-wrapped MoS 2 composite GNs@MoS 2 (182 mV, 82 mV dec -1 ) and is among the best ever reported for composites involving MoS 2 and graphene nanosheets prepared through a simple one-batch process and using a low temperature and a short time for the HER. This approach appears to be an effective and simple strategy for tuning the morphologies of composites of graphene and transition metal dichalcogenide materials for a broad range of energy applications.

Bulk heterojunction (BHJ) structure based organic photovoltaics (OPVs) have recently showed great potential for achieving high power conversion efficiencies (PCEs). An ideal BHJ structure would feature large donor/acceptor interfacial areas for efficient exciton dissociation and gradient distributions with high donor and acceptor concentrations near the anode and cathode, respectively, for efficient charge extraction. However, the random mixing of donors and acceptors in the BHJ often suffers the severe charge recombination in the interface, resulting in poor charge extraction. Herein, we propose a new approach-treating the surface of the zinc oxide (ZnO) as an electron transport layer with potassium hydroxide-to induce vertical phase separation of an active layer incorporating the nonfullerene acceptor IT-4F. Density functional theory calculations suggested that the binding energy difference between IT-4F and the PBDB-T-2Cl, to the potassium (K)-presenting ZnO interface, is twice as strong as that for IT-4F and PBDB-T-2Cl to the untreated ZnO surface, such that it would induce more IT-4F moving toward the K-presenting ZnO interface than the untreated ZnO interface thermodynamically. Benefiting from efficient charge extraction, the best PCEs increased to 12.8% from 11.8% for PBDB-T-2Cl:IT-4F-based devices, to 12.6% from 11.6% for PBDB-T-2Cl:Y1-4F-based devices, to 13.5% from 12.2% for PBDB-T-2Cl:Y6-based devices, and to 15.7% from 15.1% for PM6:Y6-based devices.