Search

The slow non-radiative surface recombination velocity of gallium nitride (GaN) in combination with its highly efficient radiative recombination makes this material ideally suited for microLEDs with dimensions as small as 1 µ m and even below, serving as the fundamental building block of micro-displays. However, due to their superior miniaturization potential and energy efficiency, GaN-based microLEDs have applications that extend well beyond display technology. Their capability to produce optical patterns with high resolution, which can be modulated at extremely high frequencies, makes them suitable for numerous other applications. We suggest exploiting these exciting properties for a new and potentially equally significant application: utilizing microLEDs in optical processing units for artificial intelligence workloads. In neuromorphic computing, relevant aspects of biological neural networks are emulated directly with either electronic circuits or photonic devices, avoiding the shortcomings of conventional digital computer technology for AI workloads, which generally require massively parallel information processing. GaN microLEDs are discussed here as a promising enabling technology for optical neuromorphic processing units. We see great potential to substantially decrease power consumption through massively parallel in-memory processing combined with efficient photon production and detection. A theoretical analysis of scalability and energy efficiency is provided. A macroscopic bench-top optical microLED demonstrator is presented, which experimentally proves the feasibility of our approach. Future potential and challenges associated with miniaturizing and scaling microLED-based optical processing units are discussed. Finally, we summarize the open research questions that require attention before fully functional and miniaturized optical neuromorphic processing units based on GaN microLEDs can be realized.

IntroductionMycoplasma anserisalpingitidis is one of the most important waterfowl-pathogenic mycoplasmas. Due to inadequate antibiotic treatment, many strains with high minimal inhibitory concentration (MIC) values for multiple drugs have been isolated lately. Decreased antibiotic susceptibility in several Mycoplasma species are known to be associated with mutations in topoisomerase and ribosomal genes, but other strategies such as active efflux pump mechanisms were also described. The scope of this study was the phenotypic and genetic characterization of the active efflux mechanism in M. anserisalpingitidisMethodsWe measured the MIC values in the presence and absence of different efflux pump inhibitors (EPIs), such as carbonyl cyanide m-chlorophenylhydrazine (CCCP), orthovanadate (OV), and reserpine (RSP). Moreover, bioinformatic tools were utilized to detect putative regulatory sequences of membrane transport proteins coding genes, while comparative genome analysis was performed to reveal potential markers of antibiotic resistance.ResultsOut of the three examined EPIs, CCCP decreased the MICs at least two-fold below the original MICs (in 23 cases out of 36 strains). In the presence of OV or RSP, MIC value differences could be seen only if modified dilution series (10% decrease steps were used instead of two-fold dilutions) were applied (in 24/36 cases with OV and 9/36 with RSP). During comparative genome analysis, non-synonymous single nucleotide polymorphisms (nsSNPs) were identified in genes encoding ABC membrane transport proteins, which were displayed in higher percentages in M. anserisalpingitidis strains with increased MICs. In terms of other genes, a nsSNP was identified in DNA gyrase subunit A (gyrA) gene which can be related to decreased susceptibility to enrofloxacin. The present study is the first to highlight the importance of efflux pump mechanisms in M. anserisalpingitidis.DiscussionConsidering the observed effects of the EPI CCCP against this bacterium, it can be assumed, that the use of EPIs would increase the efficiency of targeted antibiotic therapy in the future control of this pathogen. However, further research is required to obtain a more comprehensive understanding of efflux pump mechanism in this bacterium.

Maintaining vacuum integrity for the semiconductor manufacturing processes is extremely important to improve semiconductor fab productivity. The expensive machinery and the enormous costs of production downtime require reliable sealing systems which are designed to operate the longest possible preventative maintenance (PM) cycles. Being able to predict the lifetime of the sealing systems can help determine the optimum maintenance periods and hence increase profitability in costly wafer processing. The present contribution describes a finite element method to predict the lifetime of vacuum sealing systems limited by aging effects of the elastomer. Several different applications are considered including isothermal and non-isothermal conditions. Furthermore, homogeneous and inhomogeneous temperature fields are analyzed. Finally, the model predictions are compared to experimental data. [ABSTRACT FROM AUTHOR]

The aim of the present study was to monitor the dynamics and to measure the safety and efficacy of a live, attenuated, thermosensitive Mycoplasma anserisalpingitidis vaccine candidate, namely MA271, in geese breeder flocks under field conditions. Two rearing flocks were vaccinated with MA271 at 4 weeks of age and boosted at 24 weeks of age by cloaca inoculation (1 ml) and eye-dropping (60 µl). The geese then were transported to multi-aged breeding farms. Two breeding flocks served as controls. Colonization of the cloaca by MA271 showed 75% maximum prevalence between 4 and 6 weeks after the first vaccination. Then the prevalence decreased to 25% until the cooler, humid fall months which coincided with the booster vaccination. Boosting raised cloacal colonization to 100%. No clinical signs were observed in the vaccinated birds. After transportation to five multi-aged breeding farms, the wild-type strain appeared as well as MA271 in three flocks. In one flock, the wild-type strain completely displaced MA271, while in one flock only MA271 was detected. Only wild-type strains were detected in the control flocks; however, due to an HPAI outbreak, both flocks were exterminated before the end of the study. Based on the available data, the median percentage of infertile eggs was 3.7-5.1% in the MA271 vaccinated flocks, and 7.7% in the non-vaccinated flock. In conclusion, MA271 can colonize the cloaca of geese under field conditions. MA271 proved to be safe and presumably protects against M. anserisalpingitidis-induced reproduction losses. [ABSTRACT FROM AUTHOR]

In preparation for the SPISE 8 workshop around the turn of the year 2022/2023, again a survey in the European Member States and other countries in Europe was carried out. The aim of this survey was to compile information concerning the actual situation of the inspection of pesticide application equipment PAE in use and this time especially the occurrence of problems connected to the implementation of an inspection system. The responsible colleagues of all involved countries got a short questionnaire where they gave new information. Special thanks to the rapporteurs for this additional task. [ABSTRACT FROM AUTHOR]

BackgroundThere is growing evidence that technology-based interventions (TBIs) are effective for the treatment of depression. As TBIs are gaining acceptance, a question arises whether good therapeutic alliance, considered a key aspect of psychotherapy, can be established without or with minimal face-to-face contact or rather changes if blended concepts are applied. While therapeutic alliance has been studied extensively in the context of face-to-face therapy, only few studies have reviewed evidence on alliance ratings in TBIs. ObjectiveThe purpose of this study was to examine therapeutic alliance in technology-based psychological interventions for the treatment of depression. MethodsWe searched Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, PsycINFO, PSYNDEX, CINAHL, clinical trial registers, and sources of grey literature for randomized controlled trials on TBIs in the treatment of adults with unipolar depression. All publications were selected according to prespecified criteria. Data were extracted by two independent reviewers. ResultsA total of eight out of 98 studies (9.5%) included in the review on TBIs for depression considered therapeutic alliance as part of their evaluation. The available data covered eight different treatment conditions, including four stand-alone treatments (face-to-face psychotherapy, email, telephone, and internet program) and four combined treatments (face-to-face psychotherapy plus a smartphone app and an internet program combined with face-to-face psychotherapy, treatment as usual, or email/telephone). On average, patients rated the alliance positively across all groups. Importantly, no relevant group differences regarding therapeutic alliance sum scores were found in any of the studies. Five studies investigated the relationship between patients’ alliance ratings and treatment outcome, revealing mixed results. ConclusionsOur results suggest that it is possible to establish a positive therapeutic alliance across a variety of different TBIs for depression, but this is based on a small number of studies. Future research needs to determine on what basis therapeutic alliance is formed in settings that do not allow for additional nonverbal cues, perhaps with adapted instruments to measure therapeutic alliance. Trial RegistrationPROSPERO International Prospective Register of Systematic Reviews CRD42016050413; https://www.crd.york.ac.uk/prospero/display_record.php?ID=CRD42016050413) International Registered Report Identifier (IRRID)RR2-10.1136/bmjopen-2018-028042

Mechanical properties of insect wings are essential for insect flight aerodynamics. During wing flapping, wings may undergo tremendous deformations, depending on the wings’ spatial stiffness distribution. We here show an experimental evaluation of wing stiffness in three species of flies using a micro-force probe and an imaging method for wing surface reconstruction. Vertical deflection in response to point loads at 11 characteristic points on the wing surface reveals that average spring stiffness of bending lines between wing hinge and point loads varies ∼77-fold in small fruit flies and up to ∼28-fold in large blowflies. The latter result suggests that local wing deformation depends to a considerable degree on how inertial and aerodynamic forces are distributed on the wing surface during wing flapping. Stiffness increases with an increasing body mass, amounting to ∼0.6 Nm−1 in fruit flies, ∼0.7 Nm−1 in house flies and ∼2.6 Nm−1 in blowflies for bending lines, running from the wing base to areas near the center of aerodynamic pressure. Wings of house flies have a ∼1.4-fold anisotropy in mean stiffness for ventral versus dorsal loading, while anisotropy is absent in fruit flies and blowflies. We present two numerical methods for calculation of local surface deformation based on surface symmetry and wing curvature. These data demonstrate spatial deformation patterns under load and highlight how veins subdivide wings into functional areas. Our results on wings of living animals differ from previous experiments on detached, desiccated wings and help to construct more realistic mechanical models for testing the aerodynamic consequences of specific wing deformations.

Besides high-power light-emitting diodes (LEDs) with dimensions in the range of mm, micro-LEDs (μLEDs) are increasingly gaining interest today, motivated by the future applications of μLEDs in augmented reality displays or for nanometrology and sensor technology. A key aspect of this miniaturization is the influence of the structure size on the electrical and optical properties of μLEDs. Thus, in this article, investigations of the size dependence of the electro-optical properties of μLEDs, with diameters in the range of 20 to 0.65 μm, by current–voltage and electroluminescence measurements are described. The measurements indicated that with decreasing size leakage currents in the forward direction decrease. To take advantage of these benefits, the surface has to be treated properly, as otherwise sidewall damages induced by dry etching will impair the optical properties. A possible countermeasure is surface treatment with a potassium hydroxide based solution that can reduce such defects.

Abstract Background Cannabis use is associated with an attention-dependent deficit in prepulse inhibition of the startle reflex (PPI). The aim of the current study was to investigate startle habituation in cannabis users and healthy controls during two attentional tasks. Methods Auditory startle reflex was recorded from orbicularis oculi muscle while participants (12 controls and 16 regular cannabis users) were either attending to or ignoring 100 dB startling pulses. Startle habituation was measured as the absolute reduction in startle magnitude on block 2 (last nine trials) vs. block 1 (first nine trials). Results Startle habituation with moderate effect sizes was observed in controls and cannabis users only while they were ignoring the startling pulses but not while they were attending to them. Similar results were also observed in controls (lifetime non-users of cannabis) and cannabis users with lifetime cannabis use disorders (CUD). Conclusion Startle habituation appears to depend on selective attention but not on cannabis use. Startle habituation was present when attention was directed away from auditory startling pulses in healthy controls and cannabis users. Such a similar pattern of results in both groups suggests that at least a trend exists towards presence of startle habituation regardless of cannabis use or CUD in otherwise healthy members of the general population.

The shape and function of insect wings tremendously vary between insect species. This review is engaged in how wing design determines the aerodynamic mechanisms with which wings produce an air momentum for body weight support and flight control. We work out the tradeoffs associated with aerodynamic key parameters such as vortex development and lift production, and link the various components of wing structure to flight power requirements and propulsion efficiency. A comparison between rectangular, ideal-shaped and natural-shaped wings shows the benefits and detriments of various wing shapes for gliding and flapping flight. The review expands on the function of three-dimensional wing structure, on the specific role of wing corrugation for vortex trapping and lift enhancement, and on the aerodynamic significance of wing flexibility for flight and body posture control. The presented comparison is mainly concerned with wings of flies because these animals serve as model systems for both sensorimotor integration and aerial propulsion in several areas of biology and engineering.