Search

Abstract Throughout treatment with fixed orthodontic appliances, effective plaque control is crucial to maintaining dental health. This in-vitro study evaluated the cleaning performance of eleven different brush heads of seven electric toothbrushes (oscillating-rotating and sonic motions) and varying brushing forces around orthodontic brackets. Six Mini Diamond® Twin brackets were placed on black-stained front teeth. Teeth were coated with white titanium oxide and brushed in a machine six times for one minute with two different brushing forces (1 N and 1.5 N). Eleven different brush heads were evaluated (either oscillating-rotating or sonic movements). The teeth were scanned and planimetrically evaluated after brushing. Three detailed plaque areas (DPAs) were created: proximal ( 2 mm to bracket). The proportion of contaminated proximal, mid-tier, and distant surfaces (white regions) in relation to the respective DPA was calculated. Independent of brushing forces, places with a higher distance (> 2 mm) to the orthodontic bracket had the least amount of residual contamination, followed by areas with a minor (1–2 mm) and proximal distance (

Abstract This pilot study investigated whether sonic-powered application of a bulk-fill resin-based composite (RBC) in Class-II or endodontic access cavities reduces void formation. The crowns and roots of 60 bovine teeth with Class-II cavities (C) and endodontic access cavities (E) respectively, were assigned to ten groups (C1–C5, E1–E5). Cavities were filled with RBC (SDR flow + , one increment) using different application techniques: no adaptation (C1 + E1), spreading of RBC on the cavity surfaces with a dental explorer tip (C2 + E2), low (C3 + E3) or high frequency (C4 + E4) direct activation by inserting a sonic-powered tip into RBC and high frequency indirect activation with an ultrasonic insertion tip (C5 + E5). The restorations were light-cured and investigated for voids using microtomography. The number of voids and percentage of voids related to the volume were statistically analysed (α 0.05). The percentage of voids showed no differences in E1-E5 (p > 0.05). C4 showed a significantly higher percentage of voids compared to C2 (p

Abstract Background Diamond particles have recently been used as abrasives in toothpastes, which raises questions about its abrasive behaviour towards enamel. This study was carried out to investigate the abrasive enamel wear caused by three diamond-loaded toothpastes (Candida White Diamond: CWD, Swiss Smile Diamond Glow: SSDG, Emoform F Diamond: EFD) and to compare it with a traditional toothpaste with silica abrasive (Colgate Total Original CTO). Methods Eighty bovine enamel samples were divided into four groups (n = 20) and brushed for 21,600 cycles (60 cycles/min) for 6 h at 2.5-N brushing force. The abrasive enamel wear was recorded with a contact profilometer. The median and interquartile range (IQR) of the abrasive enamel wear was calculated in each group. Pairwise comparisons were conducted using Wilcoxon signed rank exact test and the p value was adjusted according to Holm. Significance level was set at 0.05. Results Diamond-loaded toothpastes caused statistically significantly higher abrasive wear than the traditional toothpaste (p

Abstract The geometrical properties of toothbrushes play a role in developing abrasive tooth wear and non-carious cervical lesions. This study investigated the interplay between the toothbrush tuft arrangement (crossed vs. parallel) and bristle stiffness (soft vs. medium) on the abrasive dentin wear using three slurries with different levels of abrasivity (RDA: 67, 121 and 174). Twelve groups of bovine dentin samples (n = 20) were brushed with a combination of the aforementioned variables. Abrasive dentin wear was recorded with a profilometer and the resulting abrasive wear of each group was calculated and compared with each other using two-way ANOVA and pairwise tests. Toothbrushes with parallel tuft arrangement caused statistically significantly higher dentin wear compared to crossed tuft arrangement, regardless of the abrasivity level of the used slurry and the bristle stiffness. Soft crossed tuft toothbrushes caused statistically significantly higher abrasive dentin wear than medium crossed tuft toothbrushes, while soft and medium parallel tuft toothbrushes caused the same amounts of dentin wear, regardless of the RDA value of the used slurry. These results could be helpful for dentists and dental hygienists when advising patients. Crossed tuft toothbrushes could be a less-abrasive choice in comparison to parallel tuft toothbrushes.

Abstract Background This in-vitro-study aimed to evaluate the potential of different fluoride gels to prevent gastroesophageal reflux induced erosive tooth wear. Methods Surface baseline profiles of a total of 50 bovine enamel specimens [randomly assigned to five groups (G1–5)] were recorded. All specimens were positioned in a custom made artificial oral cavity and perfused with artificial saliva (0.5 ml/min). Reflux was simulated 11 times a day during 12 h by adding HCl (pH 3.0) for 30 s (flow rate 2 ml/min). During the remaining 12 h (overnight), specimens were stored in artificial saliva and brushed twice a day (morning and evening) with a toothbrush and toothpaste slurry (15 brushing strokes). While specimens in the control group (G1) did not receive any further treatment, specimens in G2–5 were coated with different fluoride gels [Elmex Gelée (G2); Paro Amin Fluor Gelée (G3); Paro Fluor Gelée Natriumfluorid (G4); Sensodyne ProSchmelz Fluorid Gelée (G5)] in the evening for 30 s. After 20 days, surface profiles were recorded again and enamel loss was determined by comparing them with the baseline profiles. The results were statistically analysed using one-way analysis of variance (ANOVA) followed by Tukey`s HSD post-hoc test. Results The overall highest mean wear of enamel (9.88 ± 1.73 µm) was observed in the control group (G1), where no fluoride gel was applied. It was significantly higher (p 0.999) showed the overall best protection from hydrochloric acid induced erosion. Enamel wear in G5 (6.64 ± 0.86 µm) was significantly higher compared to G2 (p = 0.028) and G4 (p = 0.047). Conclusions After 20 days of daily application, all investigated fluoride gels are able to significantly reduce gastroesophageal reflux induced loss of enamel.

Purpose: This study investigated the effect of toothbrush bristle stiffness and brushing force on the cleaning efficacy in vitro. Materials and Methods: Eighty bovine dentin samples were allocated to eight groups (n=10). Two custom-made toothbrushes of different bristle stiffness (soft and medium) were tested at four different brushing forces (1, 2, 3 and 4 N). Dentin samples were stained in black tea and brushed (60 strokes/min) for a total of 25 min in a brushing machine with an abrasive solution (RDA 67). Photographs were taken after 2 and 25 min of brushing time. Cleaning efficacy was measured planimetrically. Results: After 2 min of brushing, the soft-bristle toothbrush did not cause statistically significantly different cleaning efficacy at different brushing forces, while the medium-bristle toothbrush cleaned statistically significantly less efficaceously only at 1 N. Comparing the two different toothbrushes, higher cleaning efficacy was observed only at 1 N for the soft-bristle brush. At 25 min brushing time, the soft-bristle cleaned statistically significantly better at 4 N compared to 1 N and 2 N and at 3 N compared to 1 N. Using the medium-bristle, cleaning efficacy increased with increasing brushing force. After 25 min of brushing, no statistically significant difference was observed between the two different toothbrushes. Conclusion: Irrespective the brushing force, the use of a soft or medium toothbrush results in comparable cleaning efficacy. At 2 min brushing time, increasing the brushing force does not increase the cleaning efficacy. [ABSTRACT FROM AUTHOR]

Purpose: To assess the root surface roughness and substance loss induced by chemical and chemomechanical challenges on root surfaces pretreated with ultrasonic instrumentation, a hand scaler, or erythritol airflow. Materials and Methods: One hundred twenty (120) bovine dentin specimens were used in this study. Specimens were divided into eight groups and treated as follows: groups 1 and 2: polished with 2000- and 4000-grit carborundum papers but not instrumented ('untreated'); groups 3 and 4: hand scaler; groups 5 and 6: ultrasonic instrumentation; groups 7 and 8: erythritol airflow. Samples from groups 1, 3, 5, and 7 then underwent a chemical challenge (5 x 2 min HCl [pH 2.7]), whereas samples from groups 2, 4, 6, and 8 were subjected to a chemomechanical challenge (5 x 2 min HCl [pH 2.7] + 2 min brushing). Surface roughness and substance loss were measured profilometrically. Results: The least substance loss through chemomechanical challenge was noted after erythritol airflow treatment (4.65 ± 0.93 μm), followed by ultrasonic instrumentation (7.30 ± 1.42 μm) and the hand scaler (8.30 ± 1.38 μm); the last two (hand scaler and ultrasonic tip) did not differ statistically significantly. The highest roughness after chemomechanical challenge was observed on ultrasonically treated specimens (1.25 ± 0.85 μm), followed by hand-scaled specimens (0.24 ± 0.16 μm) and those subject to erythritol airflow (0.18 ± 0.09 μm); there was no statistically signficant difference between the latter two, but they both differed statistically significantly from the ultrasonically treated specimens. No statistically significant difference in substance loss through the chemical challenge was observed between specimens pretreated by the hand scaler (0.75 ± 0.15 μm), ultrasonic tip (0.65 ± 0.15 μm), and erythritol airflow (0.75 ± 0.15 μm). The chemical challenge smoothed the surfaces treated with the hand scaler, ultrasonic tip, and erythritol airflow. Conclusion: Dentin pretreatment with erythritol powder airflow resulted in a higher resistance to chemomechanical challenge than did dentin treated ultrasonically or with the hand scaler. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the absolute wear caused by toothpastes with highly discrepant REA (Relative Enamel Abrasivity) and RDA (Relative Dentin Abrasivity) values on both enamel and dentin: Candida Peppermint (CP; REA: 1; RDA: 42), Colgate Total Original (CTO; REA: 4; RDA: 100), Signal White System (SWS; REA: 8; RDA: 143), and Candida White Diamond (CWD; REA 244; RDA: 12). Materials and Methods: Eighty (80) bovine enamel samples and 80 dentin samples were divided into four groups each (n = 20) and investigated after a 6-h brushing procedure (21,600 cycles, 60 cycles/min, load of 2.5 N) with the four toothpastes. The abrasive enamel and dentin wear were registered using a contact profilometer. The median and interquartile range (IQR) of the abrasive enamel and dentin wear were calculated for each group. Pairwise comparisons were conducted using the Wilcoxon signed-rank exact test, and the p-value was adjusted according to Holm (statistical significance set at 0.05). Results: CWD led to the highest abrasive enamel wear (9.86 μm [5.77]). CTO caused the highest abrasive dentin wear (166.70 μm [69.90]), being statistically significantly higher than the wear for CP (54.20 μm [24.00]) and CWD (17.00 μm [7.80]) (p = 0.00001). The abrasive dentin wear for CWD was statistically significantly lower in comparison to all other groups (p = 0.00001). Conclusion: Toothpastes with highly discrepant REA and RDA values presented statistically significantly different absolute wear on enamel and dentin. REA and RDA values should both be declared for every toothpaste. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the effect of the supplementation of energy drinks with green tea extract on abrasive and erosive dentin wear. Materials and Methods: Six groups, each comprising 15 bovine dentin samples, were prepared, yielding a total of 90 samples. Erosion was performed by immersing the samples in Red Bull and Red Bull light with and without green tea extract. Tap water with and without green tea extract was used as the control groups. The samples were subjected to abrasive/erosive cycling for five days. The following cycling was performed daily: toothbrush abrasion (20 brushstrokes; 2.5 N); eight erosive cycles (2 min storage in the respective solutions); in between the erosive cycles, storage in artificial saliva (60 min) and again toothbrush abrasion (20 brushstrokes; 2.5 N). During the night, samples were again stored in artificial saliva. Abrasive/erosive dentin wear was measured using a stylus profilometer (μm, accuracy = 40 nm). The measured dentin loss results from the vertical position shift on the y-axis from base to final profile after the wear process in 2D. Pairwise comparisons between the groups were carried out using Wilcoxon signed-rank test. Results: The following dentin wear (median [IQR]) was measured: Red Bull: 1.9 μm (0.5); Red Bull Light: 1.3 μm (0.3); Red Bull with green tea extract: 0.8 μm (0.3); Red Bull Light with green tea extract: 0.3 μm (0.5); Tap water with green tea extract: -0.2 μm (0.7); Tap water: -1.0 μm (1.2). The comparison of all tested groups to each other proved to be statistically significant (p < 0.05). Conclusion: The supplementation of energy drinks with green tea extract provide a protective effect against erosive/ abrasive wear in vitro. [ABSTRACT FROM AUTHOR]

AimTo assess the distribution and deposition of aerosols during simulated periodontal therapy.MethodsA manikin with simulated fluorescein salivation was treated by four experienced dentists applying two different periodontal treatment options, i.e. air-polishing with an airflow device or ultrasonic scaling in the upper and lower anterior front for 5 minutes, respectively. Aerosol deposition was quantitatively measured on 21 pre-defined locations with varying distances to the manikins mouth in triplicates using absorbent filter papers.ResultsThe selected periodontal interventions resulted in different contamination levels around the patient's mouth. The highest contamination could be measured on probes on the patient's chest and forehead but also on the practitioner's glove. With increasing distance to the working site contamination of the probes decreased with both devices. Air-polishing led to greater contamination than ultrasonic.ConclusionBoth devices showed contamination of the nearby structures, less contamination was detected when using the ultrasonic. Affirming the value of wearing protective equipment we support the need for universal barrier precautions and effective routine infection control in dental practice.

Periodontitis and dental caries are two major bacterially induced, non-communicable diseases that cause the deterioration of oral health, with implications in patients’ general health. Early, precise diagnosis and personalized monitoring are essential for the efficient prevention and management of these diseases. Here, we present a disk-shaped microfluidic platform (OralDisk) compatible with chair-side use that enables analysis of non-invasively collected whole saliva samples and molecular-based detection of ten bacteria: seven periodontitis-associated (Aggregatibacter actinomycetemcomitans, Campylobacter rectus, Fusobacterium nucleatum, Prevotella intermedia, Porphyromonas gingivalis, Tannerella forsythia, Treponema denticola) and three caries-associated (oral Lactobacilli, Streptococcus mutans, Streptococcus sobrinus). Each OralDisk test required 400 µL of homogenized whole saliva. The automated workflow included bacterial DNA extraction, purification and hydrolysis probe real-time PCR detection of the target pathogens. All reagents were pre-stored within the disk and sample-to-answer processing took < 3 h using a compact, customized processing device. A technical feasibility study (25 OralDisks) was conducted using samples from healthy, periodontitis and caries patients. The comparison of the OralDisk with a lab-based reference method revealed a ~90% agreement amongst targets detected as positive and negative. This shows the OralDisk’s potential and suitability for inclusion in larger prospective implementation studies in dental care settings.

Purpose: A previous clinical study showed that the prevalence of erosive toothwear in vegetarians is statistically significantly higher than in nonvegetarians, due to the consumption of vinegar and other acidic foodstuffs. To adequately inform patients, this study investigated the erosive potential of bottled salad dressings available in Switzerland and compared it with that of orange juice. Materials and Methods: One hundred enamel samples of bovine teeth were divided into ten groups. Samples were placed in 1 of 9 bottled salad dressings or orange juice (Granini) for 2 min. Afterwards, they were rinsed with Zürich tap water for 30 s, followed by abrasion with a toothbrush for 20 brush strokes and a toothpaste-saliva mixture. Erosive/abrasive enamel wear was determined with contact profilometry after 40 cycles. Results: The enamel wear (median/IQR) caused by Tradition Sauce Balsamique (9.5 µm/5.3 µm), M-Classic Dressing Italiano (10.9 µm/12.3 µm), Betty Bossi Balsamico Dressing (9.4 µm/4.5 µm) and Thomy Balsamico Vinaigrette Dressing (14.2 µm/6.5 µm) was statistically significantly higher than that caused by orange juice (2.4 µm/0.8 µm). Enamel wear caused by M-Classic Dressing French Joghurt (0.2 µm/0.2 µm) and Coop Qualité & Prix French Dressing (1.2 µm/1.0 µm) was statistically significantly lower compared to that of orange juice. Conclusions: The pure balsamico vinegar-based dressings (Italian type) showed a statistically significantly higher erosive potential than orange juice, whereas dressings containing calcium-rich products (enriched with milk and/or cream) (French-type) caused lower enamel wear than orange juice. The study shows that some bottled dressings have erosive potential even higher than orange juice and patients should be informed accordingly. [ABSTRACT FROM AUTHOR]

Purpose: To investigate whether toothpastes with diamond powder vs those with traditional abrasives abrade dentin and enamel differently and to determine the relative dentin abrasivity (RDA) and relative enamel abrasivity (REA) values of those toothpastes.Materials and Methods: Dentin and enamel samples of bovine permanent incisors were randomly allocated into groups of eight, brushed with 20 different toothpastes (three of which contained diamond powder) and analysed for their RDA and REA values.Results: Toothpastes with diamond powder exhibit low RDA values but high REA values. Some RDA values exceeded the ones declared by the manufacturer.Conclusion: Diamond powder as an abrasive might have a mild action on dentin, but it is highly abrasive on enamel. [ABSTRACT FROM AUTHOR]

Purpose: To investigate dentin abrasivity and cleaning efficacy of novel/alternative toothpastes containing diamond particles, active carbon, sea salt or organic oils.Materials and Methods: Seventy-two bovine dentin samples (for measuring abrasivity) and 60 human dentin samples (for assessing cleaning efficacy) were used in this study. Samples were divided into six groups as follows: group 1: Elmex Kariesschutz (hydrated silica); group 2: Lavera Neutral Zahngel (sea salt); group 3: Curaprox Black is White (active carbon); group 4: Swiss Smile Diamond Glow (diamond powder); group 5: Ringana Fresh Tooth Oil (hydrated silica); and group 6: artificial saliva. Samples were brushed for a total of 26 min at 120 strokes/min, replacing slurries (1 part respective toothpaste and 2 parts artificial saliva) every 2 min. Finally, abrasive dentin wear was measured profilometrically and cleaning efficacy planimetrically.Results: The highest abrasivity values were observed for Lavera Neutral Zahngel (sea salt 9.2 µm) and Elmex Kariesschutz group (hydrated silica 6.0 µm). The lowest abrasivity value was observed for Ringana Fresh Tooth Oil group (hydrated silica 1.3 µm). The highest cleaning efficacy was observed for Elmex Kariesschutz group (86.7%) and the lowest cleaning efficacy was observed for Ringana Fresh Tooth Oil group (31.3%).Conclusion: The addition of diamond powder or active carbon to toothpastes could offer high cleaning efficacy with low dentin abrasivity. The addition of sea salt to traditional abrasives might cause high abrasive dentin wear without adding further cleaning benefit. [ABSTRACT FROM AUTHOR]

Purpose: To investigate dental enamel wear caused by erosion and abrasion while using a combination of anti-erosive toothbrush/-paste.Materials and Methods: A total of 60 enamel specimens from bovine incisors were randomly assigned into five groups of 12 specimens each (G1-5, n = 12): (G1) control group (no treatment), (G2) standard medium toothbrush Paro M43 and standard toothpaste Elmex Caries Protection, (G3) standard medium toothbrush Paro M43 and anti-erosive toothpaste Elmex Protection Erosion, (G4) anti-erosive toothbrush Elmex Erosion Soft and standard toothpaste Elmex Caries Protection, (G5) anti-erosive toothbrush Elmex Erosion Soft and anti-erosive toothpaste Elmex Protection Erosion. Initially, surface baseline profiles were recorded using profilometry. In a total of 60 cycles, all specimens were exposed to hydrochloric acid (pH = 3) for 1 min, rinsed with tap water to stop the erosive attack and brushed according to the specific protocol of each group (15 brushing strokes per run). Enamel loss was determined by comparing the surface profiles before and after 60 cycles and the results were statistically analysed using analysis of variance (ANOVA).Results: The significantly highest loss of enamel was observed in the control group G1(1.4 ± 0.20 µm) (p < 0.001). G2 turned out to be the most abrasive toothbrush/-paste combination (1.12 ± 0.15 µm), G3 the least invasive (0.40 ± 0.04 µm) (p < 0.001, respectively).Conclusion: All combinations of the investigated toothbrushes/-pastes reduce erosive/abrasive enamel wear. However, the highest reduction was observed for the combination of anti-erosive toothpaste and standard toothbrush (G3). [ABSTRACT FROM AUTHOR]