Search

The overall objective of this work was to conduct a critical literature review on the application of the circular economy (CE) hierarchy for the management of COVID-19 healthcare waste (HCW). To describe the problem created by COVID-19 HCW, first, the subsystems of the overall management system, including generation, segregation, classification, storage, collection, transport, treatment and disposal, were reviewed and briefly described. Then, the CE hierarchy using the 10R typology was adapted to the management of COVID-19 HCW and included the strategies Refuse, Reduce, Resell/Reuse, Repair, Reprocess, Refurbish, Remanufacture, Repurpose, Recycle and Recover (energy). Disposal was added as a sink of residues from the CE strategies. Using the detailed 10R CE hierarchy for COVID-19 HCW management is the novelty of this review. It was concluded that R-strategy selection depends on its position in the CE hierarchy and medical item criticality and value. Indicative HCW components, which can be managed by each R-strategy, were compiled, but creating value by recovering infectious downgraded materials contaminated with body fluids and tissues is not currently possible. Therefore, after applying the circular solutions, the end of pipe treatment and disposal would be necessary to close material cycles at the end of their life cycles. Addressing the risks, knowledge gaps and policy recommendations of this article may help to combat COVID-19 and future pandemics without creating environmental crises., Competing Interests: Declaration of conflicting interestsThe author declared no potential conflicts of interest with respect to the research, authorship and/or publication of this article.

In Sri Lanka, the management of Construction & Demolition (C&D) waste poses a major problem, leading to environmental degradation and depletion of resources. This study aims to tackle these issues by examining the implementation of Circular Economy (CE) strategies within the construction industry of Sri Lanka. The focus is on reducing waste generation and maximizing resource utilization during the demolitions and repurpose, as well as material recovery and production stages of the building project life cycle. These stages are crucial in terms of waste generation and resource consumption. A qualitative approach was employed in this research, utilizing the Delphi technique to gather insights through a series of three rounds of expert interviews. In the first round, 17 experts were involved, followed by 15 in the second round, and 12 in the final round. The data collected from these interviews were analysed using manual content analysis methods. Based on the research findings, a total of 14 C&D Waste Management (WM) issues were identified specifically in the Demolitions and Repurpose Stage in Sri Lanka. For each issue, suitable strategies were proposed to overcome them effectively. Furthermore, the study examined the impact of CE strategies on minimizing these issues within the context of the project management iron triangle. Similarly, the Material Recovery and Production Stage of the building presented eight C&D WM issues, each accompanied by corresponding strategies to address them. The research also explored the influence of CE strategies in mitigating these issues, considering the project management iron triangle. During the demolitions and repurpose stage, CE strategies focus on reducing waste generation and optimizing resource utilization. This involves carefully deconstructing buildings to salvage and recover materials that can be reused or repurposed., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Proper hospital waste management poses important concerns due to the risk capacity of hospital waste to health and the environment. Healthcare management approaches have changed in recent years, motivated by the desire to minimize the environmental impact. The review aims to examine the current HCW and considers the local challenges associated with establishing a circular economy (CE) to improve hospital waste management regarding training along Plan, Do, Check, and Act (PDCA). The study found that mean medical and general waste segregation rates in public hospitals were 50.15 and 49.85, respectively. On average, 3.6 kg of waste was generated per bed per day. Analysis revealed a significant correlation between total waste and infectious waste with the number of occupied beds in the hospital (p < 0.05). Updating national laws by the CE approach is necessary. Our insights into circular hospital waste urge establishing a green management team, new training methods, and continuous supervision. Using PDCA to enhance waste segregation, training, and other aspects of hospital waste management is vital., (© 2024. The Author(s).)

Rapid expansion in urban areas has engendered a superfluity of municipal solid waste (MSW) stemming from contemporary civilization, encompassing commercial sectors and human undertakings. Kerbside waste, a type of MSW, has the potential for recycling and reuse at the end of its first life cycle, but is often limited to a linear cycle. This study aimed to assess the life cycle costs of different separation and recycling methods for handling kerbside waste. A new life cycle cost model, drawing from the circular economy's value retention process (VRP) model, has been created and applied to assess the continuous recycling of kerbside glass. The study investigates two key separation techniques, kerbside recycling mixed bin recycling (KRMB) kerbside glass recycling separate bin (KGRSB) and analyses their impact on the life cycle cost of the recycling process. Additionally, the research explores two approaches of recycling and downcycling: closed-loop recycling, which pertains to the recycling of glass containers, and open-looped recycling, which involves the use of recycled glass in asphalt. The results showed when use annually collected waste as the functional unit, the KRMB model incurred lower costs compared to the KGRSB model due to its lower production output. However, when evaluated over a 1-ton production of glass container and asphalt, the KGRSB method demonstrated superior cost performance with a 40-50% reduction compared to the KRMB method. The open-loop recycling method (asphalt) incurred a higher cost compared to the closed-loop recycling method due to its larger production volume over a 21-year period., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Currently, there is a surge in the adoption of green construction practices (GCP) to address and attempt to alleviate the adverse effects of construction activities on the natural environment. The current research surrounding sustainability in the industry has witnessed a notable surge in efforts, primarily driven by a growing consciousness of environmental concerns. In this context, it is worth noting that the focus of assessment schemes in developed countries has predominantly gravitated toward economic and environmental factors, with relatively less emphasis placed on social performance (SP). Many researchers have underscored this disparity, highlighting the need for a more comprehensive approach encompassing all three sustainability dimensions. Hence, the present research examines the effects of green construction practices on economic performance (ECP) while considering the mediating role of environmental performance (EP) and SP. The results showed no direct impact of GCP on ECP. However, the mediating role of SP and EP in the association between GCP and ECP was found to be statistically significant. The present study provides several implications. This study presents empirical evidence that implementing GCP yields several benefits for contractors, including cost reduction in waste management, legal expenses, and energy consumption. These cost savings effectively offset the initial investment required to implement GCP, enabling construction projects to attain ECP thresholds. This study provides a significant contribution to the expanding corpus of knowledge concerning green building site practices and construction management. It offers novel insights into the influence of a project's EP and SP on its economic feasibility. Furthermore, this research study has effectively showcased the positive impact of GCP on construction projects' environmental construction performance, particularly concerning environmental and social considerations. Integr Environ Assess Manag 2024;20:1396-1406. © 2024 SETAC., (© 2024 SETAC.)

The plastic industry needs to match the recycling goals set by the EU. Next to technological hurdles, the cost of plastics mechanical recycling is an important modality in this transition. This paper reveals how business economic cost calculation can expose significant pitfalls in the recycling process, by unravelling limitations and boundary conditions, such as scale. By combining the business economic methodology with a Material Flow Analysis, this paper shows the influence of mass retention of products, the capacity of the processing lines, scaling of input capacity, and waste composition on the recycling process and associated costs. Two cases were investigated: (i) the Initial Sorting in a medium size Material Recovery Facility and (ii) an improved mechanical recycling process for flexibles - known as the Quality Recycling Process - consisting of Additional Sorting and Improved Recycling. Assessing the whole recycling chain gives a more holistic insight into the influences of choices and operating parameters on subsequent costs in other parts of the chain and results in a more accurate cost of recycled plastic products. This research concluded that the cost of Initial Sorting of flexibles is 110,08-122,53 EUR/t, while the cost of subsequent Additional Sorting and Improved Recycling ranges from 566,26 EUR/t for rPE Flex to 735,47 EUR/t for rPP Film, these insights can be used to determine a fair price for plastic products. For the Quality Recycling Process it was shown that rationalisation according to the identified pitfalls can reduce the cost per tonne of product by 15-26%., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: [Nicola Van Camp reports financial support was provided by Research Foundation Flanders. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper]., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

In current construction waste resource management processes, the effect of government supervision is unclear, and illegal treatment and low-quality reproduction of recycling and reprocessing enterprises by construction units are common. To improve the degree of resource utilization of construction waste and deeply explore the role of its key influencing factors, a tripartite evolutionary game model of construction waste resource treatment in which the government, construction units, and recycling and reprocessing enterprises are the research objects that considers public participation factors to be established. MATLAB is used to simulate the sensitivity of relevant parameters. The results show that: (1) An increase in government fines can regulate the behavior of enterprises; (2) Low government subsidies are conducive to the development of a tripartite stability strategy; and (3) An increase in the cost difference between the two strategies of the enterprise will weaken its willingness to carry out green operations (and after the cost difference exceeds the threshold, the enterprise will refuse to carry out green operations); (4) The reputation value brought by the public and the additional value added by reputation under the contrast effect have an incentive effect on the enterprise and the government; and (5) The peak value of the inverted U-shaped curve of government strategy choice is affected by the degree of public participation. Therefore, the government should propose rectifications in terms of fines and subsidies, and both companies can use technological innovation to reduce costs. At the same time, it is necessary to raise stakeholders' awareness of resource utilization and encourage the public to actively participate in supervision. The research conclusions can provide a decision-making reference for improving the utilization of construction waste resources and the efficient treatment of construction waste resources., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Wang et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Circularity assessment and monitoring have become a core research topic in academic societies, as well as a basis for developing economic development measures. Despite the circular economy (CE) being a game-changer for the agro-food sector, little effort has been made to identify its level of circularity. In order to achieve the transition to a CE, stakeholders and industry professionals must be provided with appropriate indicators, tools and methods. Due to the complexity of CE measurement, it is necessary to devise indicators, methods and tools that are tailored to each industry. The objective of this review article is to identify the indicators and tools required for assessing the level of circularity in olive oil mills. This research collected data regarding available CE indicators at the company and product levels, as well as those applicable to the agro-food industry. As a result, a list of indicators appropriate to the needs of olive mills has been developed that could be used to measure the level of implementation of circular practices in this industry. The main conclusion reached is that once indicators are defined, they should be compared or combined with life cycle assessment methodologies to determine their applicability and effectiveness. There is no doubt that olive oil plays a significant economic, environmental and social role throughout the Mediterranean region. Hence, evaluating the CE is essential to demonstrate the effectiveness of current policies., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

The European Union (EU) is moving towards sustainable development, and a key role is played by circular economy (CE) models geared towards reducing pressure on natural resources, generating jobs and fostering economic opportunities. Indicators are able to aggregate a variety of information and their use, through the use of multi-criteria decision analysis (MCDA), allows the performance of alternatives to be monitored. This work aims to calculate the performance of the EU27 in the years 2019 and 2020 according to 15 CE indicators available on Eurostat. The results of the Analytic Hierarchy process show that the greatest impact on circularity is determined by the category 'competitiveness and innovation', which together with the category 'global sustainability and resilience' accounts for two thirds of the overall weight. The MCDA results show that Belgium prevails in both the baseline and alternative scenarios, ahead of Italy and the Netherlands respectively. In general, circular policies see western European countries excel, while the performance of eastern European countries is weaker. The implications of this work highlight the three main barriers to the development of CE models: (i) illegal waste management; (ii) lack of knowledge and low level of investment in circular technologies and (iii) low distribution of value among stakeholders. In this way, resource management based on circularity will enable Europe to meet the challenges of sustainability with less dependence on imported raw materials., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

The use of plastics has become deeply ingrained in our society, and there are no indications that its prevalence will decrease in the foreseeable future. This article provides a comprehensive overview of the global plastic waste disposal landscape, examining it through regional perspectives, various management technologies (dumping or landfilling, incineration, and reuse and recycling), and across different sectors including agriculture and food, textile, tourism, and healthcare. Notably, this study compiles the findings on life-cycle carbon footprints associated with various plastic waste management practices as documented in the literature. Employing the bio-circular-green economy model, we advocate for the adoption of streamlined and sustainable approaches to plastic management. Unique management measures are also discussed including the utilization of bioplastics combined with smart and efficient collection processes that facilitate recycling, industrial composting, or anaerobic digestion. Moreover, the integration of advanced recycling methods for conventional plastics with renewable energy, the establishment of plastic tax and credits, and the establishment of extended producer responsibility are reviewed. The success of these initiatives relies on collaboration and support from peers, industries, and consumers, ultimately contributing to informed decision-making and fostering sustainable practices in plastic waste management., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

To move from a traditional end of pipe approach into a more sustainable solid waste management system, the Jordanian Government has recently passed a set of new regulations The National Solid Waste Management Strategy has put a road map to encourage circular economy practices. One of the considered policy instruments is the adoption of the extended producer responsibility (EPR). The current study aimed to adopt a multi-criteria decision-making method to select the most convenient EPR structure within the Jordanian context. The study used analytical hierarchy process (AHP) and fuzzy AHP (FAHP) techniques to select the suitable type of producer responsibility organization (PRO) structure. A four-level hierarchy model was constructed with 4 criteria, 10 sub-criteria and 3 PRO alternatives. The analysis revealed that the legal and administrative criteria is the most important one (0.47) followed by environmental criteria (0.22), whereas the least important ones were socio-economic (0.17) and technical criteria (0.13). The most preferable PRO alternative was found to be PRO with profit. There were slight differences between all weight values under AHP and FAHP. Despite the availability of several laws, there is a need to develop the legal and administrative framework to enable the adoption of EPR in Jordan. Research should be the first step in the process of EPR system design. None of the previous studies conducted used the AHP and FAHP in assessing and selecting the EPR systems., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

The purpose of this study is to review the relationship between the highly anticipated concept of circular economy (CE) and sustainable development goals (SDGs). These two sustainability principles have transformed organizations and countries in their quest to achieve sustainable development. Despite their importance to the business and corporate realm, the discussion of these two concepts has been developed in silos, arbitrarily connected. Through a bibliometric approach, this study reviewed 226 journal publications and 16,008 cited references from the Web of Science (WoS) to understand the past, present and future trends of the two concepts and their impact on the sustainability development. The bibliometric approach of citation, co-citation and co-word analysis uncovers the relevant and significant themes and research streams. Theoretical and practical implications were discussed within the broader business and governance perspective to develop a substantial triple bottom line in creating a sustainable future for civil society., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

With the recent advancement in artificial intelligence, there are new opportunities to adopt smart technologies for the sorting of materials at the beginning of the recycling value chain. An automatic bin capable of sorting the waste among paper, plastic, glass & aluminium, and residual waste was installed in public areas of Milan Malpensa airport, a context where the separate collection is challenging. First, the airport waste composition was assessed, together with the efficiency of the manual sorting performed by passengers among the conventional bins: paper, plastic, glass & aluminium, and residual waste. Then, the environmental (via the life cycle assessment - LCA) and the economic performances of the current system were compared to those of a system in which the sorting is performed by the automatic bin. Three scenarios were evaluated: i) all waste from public areas, despite being separately collected, is sent to incineration with energy recovery, due to the inadequate separation quality (S0); ii) recyclable fractions are sent to recycling according to the actual level of impurities in the bags (S0R); iii) fractions are sorted by the automatic bin and sent to recycling (S1). According to the results, the current separate collection shows a 62 % classification accuracy. Focusing on LCA, S0 causes an additional burden of 12.4 mPt (milli points) per tonne of waste. By contrast, S0R shows a benefit (-26.4 mPt/t) and S1 allows for a further 33 % increase of benefits. Moreover, the cost analysis indicates potential savings of 24.3 €/t in S1, when compared to S0., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Barriers to achieving and sustaining access to water, sanitation, hygiene, cleaning, and waste management (WASH) in health care facilities include a lack of supportive policy environment and adequate funding. While guidelines exist for assessing needs and making initial infrastructure improvements, there is little guidance on how to develop budgets and policies to sustain WASH services. We conducted costing and advocacy activities in Thakurbaba municipality, Nepal, to develop a budget and operations and maintenance policy for WASH in health care facilities in partnership with the municipal government. Our objectives for this study were to (1) describe the process and methods used for costing and advocacy, (2) report the costs to achieve and maintain basic WASH services in the 8 health care facilities of Thakurbaba municipality, and (3) report the outcomes of advocacy activities and policy development. We applied bottom-up costing to enumerate the resources necessary to achieve and maintain basic WASH services and their costs. The annual costs to achieve, operate, and maintain basic access to WASH services ranged from US$4881-US$9695 per facility. Cost findings were used to prepare annual budgets recommended to achieve, operate, and maintain basic services, which were presented to the municipal government and incorporated into an operations and maintenance policy. To date, the municipality has adopted the policy and established a recovery fund of US$3831 for repair and maintenance of infrastructure and an additional US$153 per facility for discretionary WASH spending, which were to be replenished as they were spent. Advocacy at the national level for WASH in health care facilities is currently being championed by the municipality, and findings from this project have informed the development of a nationally costed plan for universal access. This study is intended to provide a roadmap for how cost data can be collected and applied to inform policy., (© Chettry et al.)

Researchers are now focusing on using the circular economy model to manufacture nanocellulose composites due to growing environmental issues related to waste management. The circular economy model offers a sustainable solution to the problem by optimizing resource efficiency and waste management by reducing waste, maintaining value over time, minimizing the use of primary resources, and creating closed loops for goods, components, and materials. With the use of the circular economy model, waste, such as industrial, agricultural, and textile waste, is used again to produce new products, which can solve waste management issues and improve resource efficiency. In order to encourage the use of circular economy ideas with a specific focus on nanocellulose composites, this review examines the concept of using circular economy, and explores ways to make nanocellulose composites from different types of waste, such as industrial, agricultural, and textile waste. Furthermore, this review investigates the application of nanocellulose composites across multiple industries. In addition, this review provides researchers useful insights of how circular economics can be applied to the development of nanocellulose composites, which have the goal of creating a flexible and environmentally friendly material that can address waste management issues and optimize resource efficiency., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Muhammad Adlan Azka reports financial support was provided by the Ministry of Higher Education, Malaysia. S. M. Ridzuan reports financial support was provided by Putra Malaysia University. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The decision to implement a biogas production project involves the evaluation of multiple variables, such as the problem to be solved, the biodigester, business model, investment, and final products. An integrative literature review was conducted, in which 58 papers were obtained and relevant criteria for decision-making in biogas production projects from organic waste were identified. Three stages were considered in the analysis of the biogas production cycle: initial, plant, and final, as well as the economic, environmental, and social aspects that influence the decision. In general, the publications are dispersed over 30 different journals. The methodology used in most studies is empirical, quantitative, and descriptive, with data collected mainly from secondary sources. From the studies, 499 original criteria were identified, which were classified into one of four categories: economic, environmental, social, and technical, which cover a total of 39 sub-criteria. Economic and technical criteria were the most frequent in publications, while environmental and social criteria were less common and less prioritized. This suggests that there is a tendency to prioritize economic and technical dimensions over environmental and social dimensions in the analysis of the papers found. Finally, a preliminary decision-making model based on the findings is proposed. Implications : The integrative review of the literature on biogas and decision-making presented in this study holds significant implications for policy and practice in the field of sustainable energy production, organic waste management and decision making for public managers. By analyzing 159 papers and developing a comprehensive classification system, we have identified key sub-criteria for decision-making in various stages of the biogas production cycle. The predominance of technical and economic sub-criteria demonstrates the priorities of the current state of biogas projects and, at the same time, the need to promote balance between the technical, economic, social and environmental spheres in decision-making in order to achieve truly sustainable biogas projects. Policymakers can utilize these findings to promote the adoption of more holistic decision-making approaches that consider diverse factors, fostering the development of environmentally-friendly and socially equitable biogas ventures. This research provides valuable insights into aligning biogas production with broader sustainability goals and guides policymakers in formulating evidence-based strategies for the advancement of renewable energy technologies.

The escalating threat of plastic pollution necessitates urgent and immediate action, particularly within the food and beverage (F&B) industry, a significant contributor to single-use plastic waste (SUP). As the global population surges, so does the consumption of single-use plastics in the F&B sector, perpetuating a linear economy model characterized by a 'take, make, use, dispose' approach. This model significantly exacerbates plastic waste issues, with projections indicating an alarming increase in plastic outputs by 2050 if current practices continue. Against this backdrop, the circular economy presents a viable alternative, with its emphasis on resource retention, recovery, and the extension of product lifecycles. This study delves into the problems posed by single-use plastics, introduces the circular economy as a sustainable model, and explores effective strategies for the recycling and reuse of plastic waste within this framework. By examining the environmental impact of SUP in the F&B sector and advocating for the adoption of circular economy principles, this paper underscores a critical pathway towards sustainable solutions in the battle against plastic pollution. In conclusion, the transition to a circular economy, underpinned by global collaboration and the proactive implementation of supportive policies, is imperative for reducing the environmental footprint of single-use plastics and fostering a sustainable future., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

This paper presents a comprehensive analysis of e-waste collection and management trends across six Canadian provinces, focusing on e-waste collection rates, provincial stewardship model attributes, program strategies and budget allocations from 2013 to 2020. Temporal and regression analyses were conducted using data from Electronic Product Recycling Association reports. A group characterization based on geographical proximity is proposed, aiming to explore the potential outcomes of fostering collaboration among neighboring provinces. The analysis emphasizes the significant impact of stewardship model attributes on e-waste collection rates, with Quebec emerging as a standout case, showcasing a remarkable 61.5% surge in collection rates. Findings from group analysis reveal a positive correlation between per capita e-waste collection rate and the growth of businesses and collection sites in Western Canada (Group A - British Columbia, Saskatchewan, and Manitoba). This highlights the potential benefits of a coordinated waste management approach, emphasizing the importance of shared resources and collaborative policies. Saskatchewan and Manitoba allocated only 6.6% and 7.0% of their respective budgets to e-waste transfer and storage. British Columbia's observed steady decrease of e-waste collection rate. In Group A, stewards handled 2.18-13.95 tonnes of e-waste during the study period. The cost per tonne of e-waste tended to be lower when more e-waste is managed per steward, suggesting the potential benefits of an integrated e-waste collection and management system., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

At present, the main raw material for producing graphene is graphite ore. However, researchers actively seek alternative resources due to their high cost and environmental problems. Biomass waste has attracted much attention due to its carbon-rich structure and renewability, emerging as a potential raw material for graphene production to be used in sports equipment. However, further progress is required on the quality of graphene produced from waste biomass. This paper, therefore, summarizes the properties, structures, and production processes of graphene and its derivatives, as well as the inherent advantages of biomass waste-derived graphene. Finally, this paper reviews graphene's importance and application prospects in sports since this wonder material has made sports equipment available with high-strength and lightweight quality. Moreover, its outstanding thermal and electrical conductivity is exploited to prepare wearable sensors to collect more accurate sports data, thus helping to improve athletes' training levels and competitive performance. Although the large-scale production of biomass waste-derived graphene has yet to be realized, it is expected that its application will expand to various other fields due to the associated low cost and environmental friendliness of the preparation technique.

Waste management is a critical public service provided by municipalities around the world. It is often problematic, inefficient, and abysmally performed in developing countries. Among the problems associated with waste management in these global locations is the issue of finance. Finance is required for both capital investment and operational costs. Methods of waste management financing differ from place to place due to cultural, political, and socio-economic peculiarities. Understanding these conditionalities is necessary to be able to proffer sustainable solutions. Despite these facts, there is limited comprehensive and relevant academic literature on waste management financing mechanisms in developing countries both in the past and recent times. This work addresses a significant gap in the literature by studying the mechanism for waste management financing in developing countries using Anambra State, Nigeria, as a case study. The current study further investigated the associated challenges and opportunities and made critical discussions on the implications on the circular economy. User fees and subsidies from the government are the major financing sources. The absence of cost-revenue model analysis, economic and institutional volatility, the unwillingness of the service users to pay fees, and lack of transparency are major challenges to the financial sustainability of waste management in the studied context. The creation of incentives for behavioral changes, adoption of neo-liberal policies, and formal integration of informal waste pickers are factors that can minimize the cost of waste management services while promoting a circular economy., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Anti-inflammatory and analgesic medications (AAMs) are widely used in Mexico and the rest of the world. Their excessive acquisition can lead to waste, representing an unnecessary expense for families and the public health system. The aim of this study was to estimate the economic cost of the waste of unused AAMs collected by the National System for the Collection of Residues of Containers and Medications (SINGREM, the acronym in Spanish) in Mexico City during 2019. Data from SINGREM on discarded AAMs in Mexico City were classified by the type and quantity of drug, pharmaceutical dosage form, origin, dose, and the complete or incomplete condition of the package. The unitary cost for each medication was based on public tenders of the Mexican Social Security Institute (IMSS) for the public sector and the prices in large drug store franchises for the private sector. A decision-making model was constructed to appraise the total cost of discarded AAMs. The economic cost of the 48924 units of discarded AAMs in SINGREM containers in Mexico City during 2019 was approx. USD$143500, of which over USD$127000 corresponded to the private health sector. The current findings evidence an enormous accumulation of unneeded or expired AAMs in Mexico City. According to the present data, the cost of such waste is substantial. The estimated cost was 8-fold higher for discarded medications originating from the private versus the public healthcare sector. It is important to implement measures to prevent this waste and increase awareness of the consequences of inadequate drug disposal.

The orbital debris population is rapidly growing, increasing the chance of a Kessler-style collision event. We report a novel method for the production of estimates for the total monetary value of all debris objects and total mass of all objects currently in orbit. The method was devised using debris object data from the European Space Agency's DISCOS dataset, classified via a decision tree. 'Reuse' and 'scrap material' scenarios were developed. A high-end estimate for reuse shows a net value of $1.2 trillion. Median and low-end net value estimates of $600 billion and $570 billion, respectively, are probably judicious. A scrap material scenario produced a high mass estimate of 19,124 tonnes, a median of 6,978 tonnes and a low estimate of 5,312 tonnes. Development of in-orbit services will be crucial to solve the orbital debris problem. A future circular economy for space may be financially viable, with potentially beneficial consequences for risk reduction; resource efficiency; additional high-value employment; and climate-change knowledge, science, monitoring and early warning data., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Improper municipal solid waste (MSW) management leads to contamination of water, soil and air with negative impacts on human health. Moreover, not dealing with residual waste has huge implications for meeting circular economy targets. Understanding how much it costs could lead to a better quality of service and boost environmental sustainability. This study estimates an input distance function using econometric techniques to measure the technical efficiency of the MSW sector in Chile. This approach further allows us to estimate the shadow price of residual waste in terms of total costs. The results indicated that the average technical efficiency of the waste sector was 0.592. This means that the potential savings in costs and residual waste among municipalities could be at the level of 40.8%. Large divergences among municipalities were found since efficiency scores ranged between 0.029 and 0.863. It is found that for 53% of the municipalities evaluated, efficiency scores varied between 0.61 and 0.80. On average, the cost of reducing residual waste was 81.10 US $ per kilogram. This means that on average the cost of preventing one more kilogram of residual waste not being collected and recycled was 81.10 US $. It was also found that on average as population density increased, the shadow price of residual waste increased as well. Implications: The study provides a methodology that allows the policy makers to estimate the efficiency of the solid waste sector where limited available statistical data usually exists in developing and medium-income countries. They have the opportunity to understand what drives costs and identify the best and worst performers. This information is essential to develop local initiatives to enhance waste recycling and therefore, achieving the targets established at national level. Managers can also see if there are other operating factors that could influence performance such as population density. The proposed methodology allows integrating other exogenous variables that might be interesting to policy makers. For instance, a tourism index could be included in the assessment to evaluate whether tourism impacts on the efficiency of municipalities in the provision of municipal solid waste services and therefore, to analyze the implementation of an eco-tax for tourists.

Background: Food residuals (FR) were anaerobically biotransformed to produce biogases (e.g. methane and hydrogen), and different pre-treatment conditions, including particle size, oil content, pH and salt content, were controlled in this study. The bio-solids of a municipal solid waste (MSW) from a wastewater treatment plant were added to assess its effect on anaerobic transformation efficiency and gas yields., Results: The breaking of FR and the application of MSW were effective in enhancing the transformation efficiency and yield of biogases. The energy transfer efficiency value of the combined FRs used in this study was probably 23%. However, it can be very cost effective to apply arbitrary proportions to treat two types of FR in the anaerobic digestion tank of a wastewater treatment plant. It was also found that the alkalinity and pH value were two major parameters that controlled the success of the transformation. About 0.16-0.17 kg of alkalinity was needed during the anaerobic digestion of 1 kg dry FR, but this requirement was decreased by the treatment applying MSW. Olive oil had higher reducing rates when used as a substitute for heat-oxidized oil to study the effect of oil content on methylation., Conclusion: The conditions for anaerobic digestion established in this study were practical for the digestion of FR in wastewater treatment plants in Taiwan. However, we nonetheless found that it was cost effective to use arbitrary proportions for both types of FR and integrate the anaerobic digestion process used in wastewater treatment plants. © 2020 Society of Chemical Industry., (© 2020 Society of Chemical Industry.)

Bio-based solutions are expected to ensure technological circularity in priority areas such as agriculture, biotechnology, ecology, green industry or energy. Although Poland, unlike the other EU member states, has not yet adopted a precise political strategy to promote bioeconomy, it has taken several actions to enable smart, sustainable and inclusive growth. This goal can be achieved by developing selected bioeconomy-related areas such as the biogas industry together with novel technologies implemented to optimize treatment of municipal sewage and management of organic solid waste. Here, the relatively strong status of the Polish biogas sector is presented. The widely used practice of sewage sludge biomethanation has led to construction of numerous complex installations combining biological wastewater treatment plants with anaerobic digesters. Based on physico-chemical processing of biostabilized sludges, a novel method for efficient granulated soil fertilizer production is elaborated, in line with the concept of circular economy and the notion of "waste-to-product". It is also shown that anaerobic fermentation of sewage sludges can be optimized by co-digestion with properly selected co-substrates to increase bioprocess yield and improve the resultant digestate fertilizer quality. The problem of post-fermentation eutrophic sludge liquors, environmentally hazardous waste effluents requiring proper treatment prior to discharge or field application, is addressed. Attempts to optimize biological treatment of digestate liquors with complex microbial consortia are presented. The Polish innovations described show that the "zero waste" path in circular bioeconomy may bring advantageous results in terms of transformation of waste materials into commercial, added-value products together with recovery of water resources., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The necessary reduction of greenhouse gas emissions requires a comprehensive shift from fossil to renewable raw materials. This is accompanied by a fundamental reorganization of the value chains of the energy sectors and large parts of the manufacturing industry. In the long term, bio-based industrial raw materials will be processed preferentially by the chemical industry. In order to use the raw materials as fully as possible, sectors that support cascade use and the recycling of by-products and products after use will gain in importance. These are in particular the waste management and energy sectors, which will be integrated into the circular value chains of the bioeconomy. The industrial realization of these value chains depends essentially on the legal framework conditions, which must be developed further accordingly., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Moving toward a more sustainable development, a pivotal role is played by circular economy and a smarter waste management. Industrial wastes from plants offer a wide spectrum of possibilities for their valorization, still being enriched in high added-value molecules, such as secondary metabolites (SMs). The current review provides an overview of the most common SM classes (chemical structures, classification, biological activities) present in different plant waste/by-products and their potential use in various fields. A bibliographic survey was carried out, taking into account 99 research articles (from 2006 to 2020), summarizing all the information about waste type, its plant source, industrial sector of provenience, contained SMs, reported bioactivities, and proposals for its valorization. This survey highlighted that a great deal of the current publications are focused on the exploitation of plant wastes in human healthcare and food (including cosmetic, pharmaceutical, nutraceutical and food additives). However, as summarized in this review, plant SMs also possess an enormous potential for further uses. Accordingly, an increasing number of investigations on neglected plant matrices and their use in areas such as veterinary science or agriculture are expected, considering also the need to implement "greener" practices in the latter sector.

Municipal solid waste (MSW) must be managed to reduce its impact on environmental matrices and population health as much as possible. In particular, the variables that influence the production, separate waste collection, and costs of MSW must be understood. Although many studies have shown that such factors are specific to an area, the awareness of these factors has created opportunities to implement operations to enable more effective and efficient MSW management services, and to specifically respond to the variables that have the most impact. The deep learning approaches used in this study are effective in achieving this goal and can be used in any other territorial context to ensure that the organizations that deal with these issues are more aware and create useful plans to promote the circular economy. Our findings indicate the important influence of number of rooms in a residential buildings and construction years on MSW production, the combination of services such as municipal collection centers and door-to-door service for separate MSW collection and the characteristics of the residential buildings in the municipalities on MSW management costs.

Background: The global climate change and its consequences force us to remodel our processes and rethink the current model of providing the HD treatments. Waste management have a massive impact on the environment and the economy. Every HD session produces above 1 kg of medical waste, which should be properly stored and destroyed. In particular in the pandemia time we should improve the dialysis unit budget as well as decrease CO 2 emission produced during the waste elimination. Materials and Methods: The checked the weight of different dialyzers used regularly in dialysis centers in Poland. The Kern CM 320-IN scale was used for the measurement. The measurement accuracy was 0.1 g. Also the filling volume of each dialyzer has been taken into consideration. Results: The dialyzers were divided into four groups depending on the surface. 1,4m2 in group one, 1.5-1.6 m 2 in group two, 1.7-1.8 m 2 in group three and finally 2.0-2.2 m 2 in group four. FX class dialyzers were lightest in every group. The heaviest ones were Polyflux dialyzers. The difference between the lightest and heaviest dialyzers was about 95 g. The filling volume was lowest in FX dialyzers and the highest in Elisio dialyzers. The difference was 20 mL. Conclusions: The weight of different dialyzers available on the market differs. The decision-makers should take into account this fact as the additional quality feature. In extreme cases the weight difference reaches 95 g. In yearly perspective, the usage of the lighter dialysis set can cause the 17 million kg decrease of medical waste and significant savings.

Annually, in the Netherlands, at least 100 million euro is wasted on unused medication. This waste not only has considerable economic implications, but is also associated with an unnecessary burden on the environment and suboptimal care due to nonadherence to therapy. The reasons for medication wastage can be found throughout the entire pharmaceutical supply and use chain, which includes manufacturers, distributors/wholesalers, prescribers, pharmacists and patients, both in the community and hospital setting. A number of strategies are needed to minimize the waste of medication, one of which should be a preventative approach. Involvement of all stakeholders in the supply chain is a prerequisite for a successful outcome. It is important that prescribers are aware of the extent and consequences of wastage, and of the possible ways to reduce it.

Financing municipal solid waste (MSW) services is one of the key challenges faced by cities in developing countries. This study used plastic waste, a constituent of MSW, to explore the possibility of generating revenue for financing MSW management in the municipalities of Nepal. The results of this study suggest that plastic material recovery could generate revenue, which is equivalent to 1.38 times of the plastic-waste-related management cost when collection efficiency reaches 66.7%. An increase in 1% of recovery rate and collection efficiency could cover an additional 4.64% and 2.06% of the costs of managing plastic waste, respectively. In addition, an increase in tax on imported plastic materials could also motivate recovery of plastic waste for recycle and reuse. An additional 1% tax on plastic imports would be sufficient to cover plastic-related waste management when plastic waste recovery and collection efficiency rates are low. This plastic recovery- revenue exercise could be expanded to other materials such as paper and metal to fully understand the possibility of sustainable financing of MSW management and reducing environmental harm in developing countries like Nepal., Competing Interests: The authors declare no competing interest of any type - personal, professional or commercial. Our affiliation to organizations that we are employed does not alter our adherence to PLOS ONE policies on sharing data and materials.”

To solve information asymmetry, we adopted the principal-agent framework to design the incentive mechanisms between the remanufacturer and the collector in the construction and demolition (C&D) waste-recycling industry. By using the model of reciprocity, we analyzed how the entities' behavioral motives affect their decisions in terms of the incentive mechanisms. The findings showed that the collector responds to their perception of the remanufacturer's intentions. If the perception is positive, they will make more effort in the collection work. If not, less effort will be put forth. Most importantly, we found that reciprocity helps to save the remanufacturer cost in the incentive mechanisms and makes the collector choose a higher effort level in the collection work. This finding showed that reciprocity serves to solve information asymmetry. By conducting a numerical simulation, we found that although a high subsidy policy can achieve rapid improvement of recycling-supply-chain performance, it is inefficient in maintaining friendly cooperation between the remanufacturer and the collector.

In order to solve the optimization problem of wet waste collection and transportation in Chinese cities, this paper constructs a chance-constrained low-carbon vehicle routing problem (CCLCVRP) model in waste management system and applies certain algorithms to solve the model. Considering the environmental protection point of view, the CCLCVRP model combines carbon emission costs with traditional waste management costs under the scenario of application of smart bins. Taking into the uncertainty of the waste generation rate, chance-constrained programming is applied to transform the uncertain model to a certain one. The initial optimal solution of this model is obtained by a proposed hybrid algorithm, that is, particle swarm optimization (PSO); and then the further optimized solution is obtained by simulated annealing (SA) algorithm, due to its global optimization capability. The effectiveness of PSOSA algorithm is verified by the classic database in a capacitated vehicle routing problem (CVRP). What's more, a case of waste collection and transportation is applied in the model for acquiring reliable conclusions, and the application of the model is tested by setting different waste fill levels (WFLs) and credibility levels. The results show that total costs rise with the increase of credibility level reflecting dispatcher's risk preference; the WFL value range between 0.65 and 0.75 can obtain the optimal solution under different credibility levels. Finally, according to these results, some constructive proposals are propounded for the government and the logistics organization dealing with waste collection and transportation.

Background and Objective: Waste of fish catching and waste of fish fillet processing will cause environmental pollution, but these materials can still be used as raw material for fish feed. The objective of this research was to change fish wastes to be made as fish powder as raw material of fish feed., Materials and Methods: This research employed a completely randomized design with three treatments; Treatment A is artificial feed that uses raw material from trash fish, Treatment B is artificial feed that uses raw material from fish fillet waste and as control is factory-made feed. The silver pompano fish stocking was done with stocking density of 20 fishes m-3. The fishes were cultured for 60 days and they were adapted with formulated feed during 7 days before testing., Results: Fish powder material in Treatment A coming from trash fish waste had good enough protein content by 43.84%, while fish powder material in Treatment B coming from fish fillet waste had lower protein content by 36.3%. The results showed that the control produced better growth activity indicators compared to Treatment A and B. The results of economic analysis showed that Treatment A and B were cheaper to produce compared to control., Conclusion: Fisheries waste both fish catch and fish fillet waste can be used as raw material for making silver pompano fish feed. Utilization of the two wastes has two functions namely saving on aquaculture costs and reducing fisheries waste.

Solid waste is one of the important causes of the environmental crisis that negatively impacts human health throughout the world and is fast approaching a disaster level that will pose a direct threat to human life. As with all other environmental problems, the increase in solid waste production that goes hand in hand with growing population and rising consumption has become a focus of great concern. Along with these rising levels, the investment, management and maintenance of solid waste collection and transport vehicles is seeing a continual increase in financial outlay. It is clear from the budgets of local authority solid waste management systems, 65 to 80% of which are accounted for by domestic waste, that the collection and transport of solid waste is a high-cost process and that this expenditure can be significantly reduced by the reorganisation of solid waste collection routing schedules and the minimization of collection frequency. This study demonstrates a linear programming model in order to develop an optimal routing schedule for solid waste collection and transportation, thereby reducing costs to a minimum. The neighbourhood of Veysel Karani in the Haliliye District of Şanlıurfa Province, Turkey, was specifically selected for this case study, having the suitable socio-economic and demographic variables to be representative of a metropolitan urban area. Firstly, the data regarding the municipal solid waste collection and transport routes were obtained from the local authority. Analysis and verification of these data were then performed. With the field study, these data were verified on-site, and the missing data were completed. Linear programming and geographic information system (GIS) analysis were used to determine the best route. Consequently, it is concluded that it is possible to save the route by 28% with GIS analysis and 33% with linear programming analysis according to the existing municipal solid waste collection and transportation routes.

In the whole territory of Castilla y León (Spain), there are currently more than 2000 waste dumps that will be restored through a novel programme in the period 2017-2019 with an investment of more than 10 M€. Castilla y León regional government is currently implementing this programme in the province of Valladolid for the environmental recovery of areas heavily degraded by the deposit of inert waste, which entails the restoration of illegal dumps in the province bigger than 1000 m 2 , a total of 133. The programme also includes the implementation of an alternative and legal system for the management of construction and demolition waste, amongst other waste streams. The sealing of landfills and tailings is encompassed within the actions that the regional government is developing in the field of integrated management of waste for their prevention, recovery, recycling and disposal in all the provinces of the community, framed within the line established in the 7th Environmental Action Programme of the European Union. The situation of illegal deposits must be corrected both through direct situations on the affected areas and through measures aimed at ensuring proper management of construction and demolition waste and pruning. This paper shows the first results obtained after the implementation of this regional initiative with the focus set on the description of the implemented waste management programme. The programme provided 2518 services in 2017 managing 6000 t of waste which, without the implementation of this programme, would probably have ended up in illegal dumps. These waste streams included debris (33%), discarded appliances (45%) and pruning (22%). The costs associated with the management of these streams were 25.53 €/t debris, 183.16 €/t appliances and 162.40 €/t pruning.

Worldwide, waste raised from tires counts 1.3-1.5 billion tonnes/year and by the end of 2025, is expected to be more than 2.5 billion tonnes. On 2013, the EU countries reached 3.6 million tonnes of used tires. However, the cheapest treatment method since now is landfilling and is considered to be a major threat for the environment and the public health. In Cyprus, the total tires that were imported on 2015 was 835,142 pieces (5.8% more than the 2014), which were equal to 9638 t, while at the same time, the total waste from those tires were 6629 tonnes. Moreover, the cement industry used 6691 tonnes of tires as alternative fuel. Until now, there are three management systems in place in Cyprus, for the end-of-life tires (ELTs). The collection of ELTs on 2011 was 1817 tonnes while at the end of 2016 was 7201 tonnes. The main treatment methods in Cyprus are the use of ELTs as alternative fuel in cement industry or to produce rubber granules (609-2738 tonnes/year) to be used to construct artificial surfaces or substrate for artificial lawn grounds and limited to pyrolysis (324-837 tonnes/year). At the same time, the environmental fees for the collection of tires varies and depends on the tire category. Furthermore, the market share of ELTs is up to 1.5 million € and the total recovery index from the market is closed to 90% the last 6 years (2013-2017). This paper evaluates and assess the existing tire waste management system (TWMS) in Cyprus in order to promote strength and weakness as well as to propose a holistic management system in insular communities in order to adopt the targets set by the concept of circular economy. The SWOT analysis identified as the main weaknesses the absence from the legislation of specific target for the recovery index of tires and the absence of any centralized logistic system to control the existing management systems while the main threats includes bureaucracy and the absence of technical and economic data which will guarantee the financial viability of a centralized treatment unit.

Appropriate clinical waste management is a critical concern in today's era. Resource-constrained countries agonize greatly over this issue in order to mitigate inappropriate clinical waste management practices. The goal of this study is to assess factors behind inappropriate waste management of small clinics in resource-constrained countries. We tested the hypothesis that negligence of government, knowledge and awareness, and financial burden are three key factors behind inappropriate solid waste management of small clinics. A two-phase survey including a pilot study and a main study was conducted for exploratory factor analysis and confirmatory factor analysis, respectively, in the fourth largest city of Pakistan, i.e., Hyderabad. One sample t test was used to validate the hypothesis, the correlation between the three key factors, and the location of the clinics were established. These factors were found to have a contribution to inappropriate waste management of small clinics. The hypothesis was then validated, and all three factors were found to have no significant variation in responses with the contrast of three types of clinic locations, namely, low-, medium-, and high-income areas. Responses were almost identical and bear equal significance from all locations, the financial burden factor is at the highest, the second factor is the negligence of government, and the third factor is that of knowledge and awareness. This study highlights the factors that are usually neglected and can help to improve solid waste management of small clinics in resource-constrained countries.

In order to investigate the issues of the recycling and remanufacturing of construction and demolition waste (C&D waste), this paper develops a closed-loop supply chain (CLSC) consisting of a manufacturer, a retailer, and a recycler, considering both the retailer's fairness concern psychology and governmental regulations. Four mathematical models are developed for the calculations, and the models are solved through game theory. In both the decentralized and centralized scenarios, the members' strategies are discussed and the optimal values of decision variables are determined. A numerical study is carried out for sensitivity analyses to verify the accuracy of the theoretical conclusions. The results reveal that retailer fairness concerns lead to a decrease in the wholesale price of building materials and negatively affect manufacturers' profits. Additionally, governmental regulations can effectively increase the recycling amount and improve the utilization rate of C&D waste, and promote a virtuous cycle of the recycling and remanufacturing of C&D waste., Competing Interests: The authors declare no conflict of interest.

A novel medium-large industrial-scale, anaerobic digestion (AD) waste-to-energy pilot plant has been investigated in terms of cost-benefit, environmental impact, and economic sustainability. This pilot plant exclusively features a multi-digester AD system induced by motorized stirring, methane purification, compression, storage and digestate-fertilizer processing systems, and subsequent electricity generation. The operational productivity and success of the pilot plant has been proven on a variety of waste feedstock substrates in the form of cow-buffalo manure and potato waste. The plant has an average energy productivity of 384 kWh/day and an annual rate of return was estimated to be 15.4%. The life cycle environmental impact analysis deliberated the significant impact potentials in terms of climate change (kg CO 2 equivalent), and fossil depletion (kg of oil equivalent) for three selected substrates: 100% cow-buffalo manure (CBM), 100% potato waste (PW), and a mixture of 75% CBM and 25% PW. The results show the climate change potential of 70 kg, 71 kg, and 149 kg and fossil depletion potential of - 2.43 kg, - 16.45 kg, and 18 kg per 2000 kg of substrate slurry, respectively. As such, the substrate of 100% CBM posed the least climate change impacts whereas 100% PW has been established most effective under the fossil depletion category.

Operating rooms generate 42% of a hospital's revenue and 30% of hospital waste. Supply costs are 56% of a total operating room (OR) budget. US academic medical centers use 2 million pounds ($15 million) of recoverable medical supplies annually. Forming a multidisciplinary leadership team, we analyzed sources of waste focusing on our Department of Neurosurgery. We developed an 8-wk pilot project to recycle "blue wrap," the number 5 plastic polypropylene material that is ubiquitously used in ORs across the country to wrap instrument pans and implant trays for sterilization. Blue wrap can be baled and sold to recyclers where the material is pelletized and transformed into plastic products. During the 39 d of the pilot, we collected 1247 pounds of blue wrap (32 lbs collected daily). The cost of the pilot was $14 987 that includes a new baler ($11 200) and 5 transport carts ($3697). The revenue received from baled blue wrap was 8 cents per pound. Cost avoidance yielded $31 680.00 in savings. Implementation of this pilot across our main hospital would yield $5000 in revenue annually and $174 240 in cost avoidance. This project can be replicated at other centers and not only reduces the environmental footprint, but also helps generate additional revenue by recycling a necessary packing material that would otherwise require payment for disposal., (Copyright © 2018 by the Congress of Neurological Surgeons.)

Objective: Globally, cities generate 1.3 billion tons of solid waste per year, amounting to a rate of 1.2 kg per person per day. Solid waste management is an important challenge to both the developed and developing countries. This study aimed to assess the willingness to pay for the improved solid waste management and associated factors among households in Injibara town, Ethiopia., Results: A total of 903 household heads participated in the study. The finding indicated that 81.06% were willing to pay for the service. The average amount of money the participants would be willing to pay per month was 29.7 ETB ($1.07)). The study revealed that sex (β = 3.24, (95% CI 1.98, 4.50)), age (β = - 0.09: 95% CI - 0.19, - 0.01), educational status (β = 6.19: 95% CI 3.54, 8.84), occupation (β = 2.43: 95% CI 1.009, 3.86), amount of solid waste generated (β = 1.74: 95% CI 0.19, 3.29), distance from dump site (β = 1.58: 95% CI 0.45, 2.72), satisfaction with the existing service (β = 3.89, (95% CI 2.75, 5.06) and wealth status (β = 2.43: 95% CI 1.0, 3.86) were statistically significant. Therefore, the level of premium load should consider the amount of waste generated, wealth status and the distance from the dump site.

The Green and Sustainable Remediation (GSR) movement demands informed, integrated, and holistic management of contaminated sites. As such, GSR may become increasingly relevant in developing countries such as China, where vast areas of contaminated land require clean-up. Among other efforts, the World Bank together with China's Foreign Economic Cooperation Office is facilitating GSR adoption through the development of a guideline on social-environmental management. However, there are no existing studies that have considered how the established remediation industry perceives its effectiveness in addressing the various social-environmental management aspects, or how certain aspects have rooted. Without this information, it may be difficult to guide social-environmental practice forward, or introduce GSR into developing remediation markets with any precision. Therefore, a questionnaire survey of remediation participators was undertaken with principal component analysis (PCA) applied to the data to help group the various aspects. The PCA extracted two components for environmental management, ascribed to: (1) on-site/local impacts; and, (2) widespread impacts, and three social management components, ascribed to: (1) community inclusion; (2) economic gain; and, (3) health, safety, and welfare. It was found that the aspects the industry are most familiar with historically are generally dealt with more effectively than those that have only recently been introduced by the GSR movement. In particular, bolstering the management of widespread environmental impacts and giving greater regard to the economic gain of remediation, may be beneficial. In developing countries, public engagement is often very limited, necessitating improvement in remediation policy and guidance., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Our world is awash with plastic. The massive increase in plastics production, combined with a shift to single-use, disposable plastics and widespread mismanagement of plastic waste, has created a huge "tragedy of the commons" (Hardin, 1968) in our oceans, seas and waterways. Plastics pollution is now a global externality that damages ecosystems, curtails biodiversity and ultimately has the potential to affect everyone on the planet. Although waste output is often modelled separately from environmental pollution in research, in the case of plastics, the waste problem has become one of global pollution. In this paper, we model the relationship between mismanaged plastic waste 1 and income per capita for 151 countries, and for the first time find empirical support for the environmental Kuznets curve using plastics pollution data. Further, we find support for the hypothesis that a key instrument for reducing plastics pollution is investment in scientific and technological research. The paper concludes with a discussion of the results, limitations, and implications for future research and practice., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Construction and demolition waste (C&D waste) is a worldwide issue that concerns the sustainable development of the construction industry. In this paper, detailed formulas are listed for calculating the costs of four typical kinds of disposal routes of C&D waste. They are illegal dumping, controlled dumping (landfill), centralized recycling, and on-site recycling. Through the specific formulas, the costs of the new construction project in Guangzhou are also estimated. Then, a cost compensation model of construction waste disposal is constructed, which serves to calculate the amount of compensation that the government shall make to the contractor's disposal cost. The results of this study include the following: (1) steps taken to ensure the appropriate measures for C&D waste disposal sites and recycling centers; (2) the on-site recycling will become the future trend of C&D waste disposal due to its lowest cost; (3) the brick cement mortar and scattered concrete take a relatively larger proportion in the total C&D waste generated during the new construction project, and their disposal costs are higher; (4) we find that the cost of illegal dumping is the lowest among four varieties of waste treatment options if only the direct cost of waste treatment is taken account. However, the cost of on-site recycling becomes the lowest if the total cost is considered; (5) according to the case study, the full estimated cost of construction waste disposal is 9074.56 CNY and the total cost compensation is 15,084.21 CNY. The amount of compensation is greater than the disposal cost and contractors make a profit, thus stimulating them to recycle and reuse construction waste. Based on the empirical findings, we make several policy proposals. The research puts forward some operational advice as a reference for decision-makers of C&D waste management.

Background: Redispensing unused medications that have been returned to outpatient pharmacies by patients may reduce waste and healthcare costs. However, little is known regarding the extra costs associated with this process, nor the price level of medications for which this is economically beneficial. The objective of this study was to assess costs associated with redispensing unused medications in the pharmacy and the price level at which redispensing becomes cost-beneficial., Methods: A micro-costing study was conducted in four Dutch outpatient pharmacies for medications requiring room-temperature storage and requiring refrigeration. First, the pharmacy's necessary additional process steps and resources for redispensing were identified. Second, time required for each process step was simulated. Third, required resources were quantified by calculating labour, purchasing and overhead costs. Lastly, a model with different scenarios was constructed to calculate the price of a medication package at which redispensing becomes cost-beneficial., Results: Three main additional process steps for redispensing were identified: (1) pack medications with product quality indicators before dispensing, (2) assess quality of medications returned to the pharmacy (temperature storage, package integrity, expiry date) and (3a) restock medications fulfilling quality criteria or (3b) dispose of medications not fulfilling criteria. Total time required for all steps up to restock one medication package was on average 5.3 (SD ±0.3) and 6.8 (SD ±0.3) minutes for medications stored at room-temperature and under refrigeration, respectively, and associated costs were €5.54 and €7.61. Similar outcomes were found if a medication package would ultimately be disposed of. The price level primarily depended upon the proportion of dispensed packages returned unused to the pharmacy and fulfilling the quality criteria: if 5% is returned, of which 60% fulfils quality criteria, the price level was €101 per package for medications requiring room-temperature storage and €215 per package for those requiring refrigeration. However, if 10% is returned, of which 60% fulfils the quality criteria, the price level decreases to €53 and €109, respectively (arbitrary proportions)., Conclusions: Redispensing unused medications in the pharmacy is at least cost-beneficial if applied to expensive medications.

In Mediterranean countries the olive oil industry produces, yearly, a huge quantity of pollutant wastes in a short time that are phytotoxic for their high content of phenols and wax that affect soil and groundwater quality. With the use of biological processes, we can transform these wastes into fertilizers for a sustainable agriculture. We used three different methods anaerobic digestion, aerobic digestion, and crude agricultural waste management system to produce organic fertilizers. The obtained compounds were chemically analysed to verify if their characteristics fell into the marketability limits permitted by the current Italian regulation. Their effects on soil were subsequently assessed. Results evidenced that all the by-products obtained were suitable as fertilizers. They were able to increase soil organic matter, microbial biomass, and nutrients with beneficial effects on soil fertility, but at different extent. The best effects were in the order: compost, olive pomace-sulphur-bentonite pelletized and digestate. Considering that the three different methodologies dispose different amounts of olive pomace (90% in aerobic digestion, 12% in anaerobic digestion and 5% in sulphur bentonite pelletized) in different time (4months for compost, 1month for anaerobic digestion and 1day for sulphur-bentonite pelletized) and processing set-up, each method can be differently competitive for environment and/or agriculture. Aerobic digestion has economic advantage over other alternatives and has the greatest fertilizer effect even if the production time is longer than the other two. Digestate, coming from anaerobic digestion, reduces the environmental impact of greenhouse gas emissions it is rich in nutrients and can be obtained in a shorter time than compost. Olive pomace-sulphur-bentonite pelletized represents a crude waste management systems that reduce greenhouse gas emission in the atmosphere producing fertilizers able to generate, mainly in alkaline soils, a soluble zone of nutrients while minimizing leaching losses to the environment., (Copyright © 2019. Published by Elsevier B.V.)