Search

Introduction: Free tissue transfer has become a mainstay in reconstructive plastic surgery, and techniques to plan such surgery continue to evolve. Novel technologies and increases in computational power have enabled computed tomographic angiography (CTA)data augmentation onto patients to assist in pedicle identification and dissection. Given the rapidly evolving field and research in this domain, a systematic re-view was undertaken to establish the evidence for its usefulness in pedicle identification and dissection. Methods: An extensive search using keywords in EMBASE and PubMed with bibliographic linkage following PRISMA guidelines was performed. 107 articles were identified. Duplicate articles were removed prior to review. Two reviewers independently screened the titles for appropriate topic relevance. Full articles were then screened for review. Results: Eleven articles were appropriate for review. Two articles analysed the time taken to identify perfo-rators using augmented reality (AR) compared to Doppler ultrasound. The remainder of the articles ana-lysed time to perforator identification, differences between projected location and dissected perforator location, qualitative feedback from surgeons on the use of AR systems for perforator identification and proof of concept and the usefulness of AR in perforator flap surgery. Conclusion: This review demonstrates that while established methods of data rendering and projection can achieve holographic projection and AR, there is a lack of objective outcome data to demonstrate its usefulness. This, combined with a cost analysis, are the main obstructions to this technology being more widely adopted.

A growing number of studies demonstrate the benefits of 3D printing in improving surgical efficiency and subsequently clinical outcomes. However, the number of studies evaluating the accuracy of 3D printing techniques remains scarce. All publications appraising the accuracy of 3D printing between 1950 and 2018 were reviewed using well-established databases, including PubMed, Medline, Web of Science and Embase. An in vivo validation study of our 3D printing technique was undertaken using unprocessed chicken radius bones (Gallus gallus domesticus). Calculating its maximum length, we compared the measurements from computed tomography (CT) scans (CT group), image segmentation (SEG group) and 3D-printed (3DP) models (3DP group). Twenty-eight comparison studies in 19 papers have been identified. Published mean error of CT-based 3D printing techniques were 0.46 mm (1.06%) in stereolithography, 1.05 mm (1.78%) in binder jet technology, 0.72 mm (0.82%) in PolyJet technique, 0.20 mm (0.95%) in fused filament fabrication (FFF) and 0.72 mm (1.25%) in selective laser sintering (SLS). In the current in vivo validation study, mean errors were 0.34 mm (0.86%) in CT group, 1.02 mm (2.51%) in SEG group and 1.16 mm (2.84%) in 3DP group. Our Peninsula 3D printing technique using a FFF 3D printer thus produced accuracy similar to the published studies (1.16 mm, 2.84%). There was a statistically significant difference (P

Background: The delivery protocol of collagenase Clostridium histolyticum (collagenase) injection for Dupuytren’s disease is variable, due to limited evidence for any one approach and widespread ‘off-label’ delivery occurring in Australia. As such, this preliminary study aimed to assess whether different collagenase delivery protocols for treating Dupuytren’s disease have an impact on effectiveness and safety. It was hypothesised that different collagenase delivery would affect outcomes. Methods: This preliminary, prospective study included a consecutive cohort of adult patients with Dupuytren’s disease being treated with collagenase within two Australian public hospitals to determine whether different collagenase delivery protocols impact on effectiveness and safety. The therapeutic effect was measured objectively using the total passive extension deficit (TPED), clinical success and clinical improvement. Three patient-reported outcome measures (PROMs) were used: Unité Rhumatologique des Affections de la Main (URAM), the Southampton Dupuytren’s Scoring Scheme and the Canadian Occupational Patient-Specific Functional Scale (PSFS). Results: The delivery of collagenase was variable at both clinics. The number of patients treated with collagenase at Institute I and Institute II was 49 and 18, respectively. Clinical success was achieved in 42 per cent of the Institute I and 35 per cent of the Institute II cohort. A statistically significant reduction in all three PROMs was observed for both cohorts. No significant differences between effectiveness or safety was found when comparing the two cohorts. Conclusion: The delivery of collagenase was variable at Institutes I and II, but these differences did not appear to impact the effectiveness or safety of collagenase delivery.

Computed tomographic (CT) angiography (CTA) is widely considered the gold standard imaging modality for preoperative planning autologous breast reconstruction with deep inferior epigastric artery (DIEA) perforator (DIEP) flap. Improved anatomical understanding from CTA has translated to enhanced clinical outcomes. To achieve this, the use of appropriate CT hardware and software is vital. Various CT scanners and contrast materials have been demonstrated to consistently produce adequate scan data. However, the availability of affordable and easily accessible imaging software capable of generating 3D volume-rendered perforator images to clinically useful quality has been lacking. Osirix (Pixmeo, Geneva, Switzerland) is a free, readily available medical image processing software that shows promise. We have previously demonstrated in a case report the usefulness of Osirix in localizing perforators and their course.In the current case series of 50 consecutive CTA scans, we compare the accuracy of Osirix to a commonly used proprietary 3D imaging software, Siemens Syngo InSpace 4D (Siemens, Erlangen, Germany), in identifying perforator number and location. Moreover, we compared both programs to intraoperative findings.We report a high rate of concordance with Osirix and Siemens Syngo InSpace 4D (99.6%). Both programs correlated closely with operative findings (92.2%). Most of the discrepancies were found in the lateral row perforators (90%).In the current study, we report the accuracy of Osirix that is comparable to Siemens Syngo InSpace 4D, a proprietary software, in mapping perforators. However, it provides an added advantage of being free, easy-to-use, portable, and potentially a superior quality of 3D reconstructed image.

Breast reconstruction is a multi-stage process, involving many individual procedures and many healthcare professionals which take the patient through from diagnosis of breast cancer to the completion of cancer treatment and ultimate breast reconstruction. With an experience of over 3,000 autologous breast reconstructions, we have refined both our surgical technique and overall approach to breast reconstruction to improve the efficiency in free flap based breast reconstruction surgery.Through a process mapping approach similar to that employed by large-scale industry, we have broken down free flap based breast reconstruction into multiple smaller processes. By looking at various steps as a simple component of the whole, we have improved our theatre efficiency to maximize patient throughput and improve our outcomes for breast reconstruction patients.Since beginning free flap breast reconstruction surgery, we have improved overall efficiency by applying a process mapping approach. In our early experience, we undertook a single patient undergoing breast reconstruction with a free flap per theatre list, moving to two patients having breast reconstruction, and now carry out three free flap based reconstructions in a single theatre per day as a routine. Specific times are demonstrated, with no increased complication rate.Through clearly defined processes, operative efficiency in autologous breast reconstruction can achieve three free flaps per day in a single theatre.

Early detection and diagnosis of upper extremity lymphoedema in patients after mastectomy and axillary lymph node clearance is important in order to treat disease before it is too advanced to achieve favourable outcomes. Patients with disease refractory to conservative management can be efficiently assessed for diagnosis and surgical intervention using advanced lymphatic imaging techniques. The current paper highlights the more readily available of these: lymphoscintigraphy, indocyanine green (ICG) lymphangiography and immunofluorescence, magnetic resonance lymphangiography (MRL) and computed tomographic lymphangiography in combination or individually. With such techniques, both diagnosis and treatment of lymphoedema has become more readily achieved, with lymphatico-venous and lymphatico-lymphatic anastomosis, and lymph node transfer now increasingly common undertakings.

Accurate volumetric analysis is an essential component of preoperative planning in both reconstructive and aesthetic breast procedures towards achieving symmetrization and patient-satisfactory outcome. Numerous comparative studies and reviews of individual techniques have been reported. However, a unifying review of all techniques comparing their accuracy, reliability, and practicality has been lacking.A review of the published English literature dating from 1950 to 2015 using databases, such as PubMed, Medline, Web of Science, and EMBASE, was undertaken.Since Bouman's first description of water displacement method, a range of volumetric assessment techniques have been described: thermoplastic casting, direct anthropomorphic measurement, two-dimensional (2D) imaging, and computed tomography (CT)/magnetic resonance imaging (MRI) scans. However, most have been unreliable, difficult to execute and demonstrate limited practicability. Introduction of 3D surface imaging has revolutionized the field due to its ease of use, fast speed, accuracy, and reliability. However, its widespread use has been limited by its high cost and lack of high level of evidence. Recent developments have unveiled the first web-based 3D surface imaging program, 4D imaging, and 3D printing.Despite its importance, an accurate, reliable, and simple breast volumetric analysis tool has been elusive until the introduction of 3D surface imaging technology. However, its high cost has limited its wide usage. Novel adjunct technologies, such as web-based 3D surface imaging program, 4D imaging, and 3D printing, appear promising.

Venous couplers are ubiquitous around the world and are a useful tool for the reconstructive microsurgeon. A systematic review of coupler performance studies demonstrated a thrombosis rate range of 0% to 3%, whilst the average time of using the device is 5 minutes. There is sparse published data on cost analysis and the impact of operator experience on the anastomotic coupler device success. Improvements in outcomes other than time benefits have also not been shown. This study aims to address these deficiencies in the literature.A retrospective clinical study was undertaken, aiming to compare equivalent groups of patients that had free flap surgery with venous micro-anastomoses with those that had sutured anastomoses. The cohort comprised all patients undergoing microsurgical breast reconstruction at the St Andrew's Centre for Plastic SurgeryBurns from January 2009 to December 2014.Between January 2010 to December 2014, 1,064 patients underwent 1,206 free flap breast reconstructions. The average age of patients was 50 years. Seventy percent of patients underwent mastectomy and immediate reconstruction during this period with the remaining 30% having a delayed reconstruction. The 1,206 free flaps comprised of 83 transverse myocutaneous gracilis (TMG) flaps, and 1,123 deep inferior epigastric artery perforator (DIEP) flaps. In total the coupler was used in 319 flaps, 26% of the cohort. There was a statistically significant clinical benefit in using the anastomotic coupler for venous anastomosis. Overall, the return to theatre rate was 12.69% whilst the overall flap loss rate was 0.75%. The overall coupler failure rate was significantly less at 1.4% whilst sutured vein failure rate was 3.57% (P=0.001).The anastomotic coupler for venous anastomosis in free flap surgery is associated with reduced operating times, reduced take-backs to theatre and cost benefits. This is the first study to demonstrate clear clinical benefits to anastomotic couplers, and suggests that these may be the gold standard for venous microanastomosis. With increasing experience with their use and technological advances, these outcomes may continue to improve.

Selecting potential recipient vessel options for free flap anastomosis is an important consideration in microsurgical breast and chest wall reconstruction. In these settings, the most common comprise the internal mammary and thoracodorsal vessels, although alternative anastomotic sites have also been described. On occasion, consideration of these alternatives becomes a necessity. The use of five separate recipient vessels is highlighted in a unique case of recurrent locally advanced breast cancer requiring multiple complex reconstructions using free tissue transfer. A 56-year-old lady presented for delayed breast reconstruction one year after radical mastectomy for locally advanced lobular breast cancer. Despite wide resections, local chest-wall recurrence five times necessitated five microsurgical reconstructions, using separate recipient pedicles: internal mammary vessels, thoracodorsal vessels, serratus branch of thoracodorsal vessels, intercostal vessels and thoracoacromial vessels. All flaps survived completely, without donor or recipient complications. There has not been a subsequent recurrence at 6 months since last reconstruction. The purpose of this report is to present the first reported case of microsurgical chest wall reconstruction using five separate free flaps requiring anastomosis to multiple recipient vessels for anterior chest wall coverage, to present a literature-based and clinical review of the regional vascular anatomy of the anterior chest wall, and to present an operative approach algorithm. In such complex cases, this understanding can facilitate a streamlined approach to management. © 2014 Wiley Periodicals, Inc. Microsurgery 37:66-70, 2017.

The high incidence of breast cancer and growing number of breast cancer patients undergoing mastectomy has led to breast reconstruction becoming an important part of holistic treatment for these patients. In planning autologous reconstructions, preoperative assessment of donor site microvascular anatomy with advanced imaging modalities has assisted in the appropriate selection of flap donor site, individual perforators, and lead to an overall improvement in flap outcomes. In this review, we compare the accuracy of fluorescent angiography, computed tomographic angiography (CTA), and magnetic resonance angiography (MRA) and their impact on clinical outcomes.A review of the published English literature dating from 1950 to 2015 using databases, such as PubMed, Medline, Web of Science, and EMBASE was undertaken.Fluorescent angiography is technically limited by its inability to evaluate deep-lying perforators and hence, it has a minimal role in the preoperative setting. However, it may be useful intraoperatively in evaluating microvascular anastomotic patency and the mastectomy skin perfusion. CTA is currently widely considered the standard, due to its high accuracy and reliability. Multiple studies have demonstrated its ability to improve clinical outcomes, such as operative length and flap complications. However, concerns surrounding exposure to radiation and nephrotoxic contrast agents exist. MRA has been explored, however despite recent advances, the image quality of MRA is considered inferior to CTA.Preoperative imaging is an essential component in planning autologous breast reconstruction. Fluorescent angiography presents minimal role as a preoperative imaging modality, but may be a useful intraoperative adjunct to assess the anastomosis and the mastectomy skin perfusion. Currently, CTA is the gold standard preoperatively. MRA has a role, particularly for women of younger age, iodine allergy, and renal impairment.

Fingertip trauma with resultant bony loss is optimally reconstructed with an autologous bone substitute, offering a unique opportunity for use of a local vascularized bone graft. The second dorsal metacarpal artery is well-described for use in soft tissue and bony reconstruction, with recent cadaveric studies suggesting a reverse-flow second dorsal metacarpal artery bone flap could reach defects in the distal phalanx. The aim of the current report is to illustrate the use of this technique in reconstructing the distal digit in a traumatized index finger with bony loss of the middle third of the distal phalanx. A 49-year-old man presented with a traumatic circular saw injury to his left index finger, with the unique finding of distal phalanx bony loss to the middle third of this bone, with no associated disruption of palmar or dorsal structures. Reconstructive goals were solely that of bony reconstruction, with no soft tissue coverage required. A reverse SDMA vascularized bone flap was successfully used for reconstruction, with the vascularized bone flap mobilized on its reverse SDMA pedicle and pivoted at the level of the distal anastomoses between the palmar and dorsal metacarpal arteries. There was uncomplicated donor and recipient site closures, and good functional outcomes with the ability to retain full distal interphalangeal joint motion and force on distal pinch grip. This case shows that the reverse second dorsal metacarpal artery vascularized bone flap may be undertaken to reconstruct bony loss in the distal phalanx.

In reconstructive surgery, preoperative planning is essential for optimal functional and aesthetic outcome. Creating a three-dimensional (3D) model from two-dimensional (2D) imaging data by rapid prototyping has been used in industrial design for decades but has only recently been introduced for medical application. 3D printing is one such technique that is fast, convenient, and relatively affordable. In this report, we present a case in which a reproducible method for producing a 3D-printed "reverse model" representing a skin wound defect was used for flap design and harvesting. This comprised a 82-year-old man with an exposed ankle prosthesis after serial soft tissue debridements for wound infection. Soft tissue coverage and dead-space filling were planned with a composite radial forearm free flap (RFFF). Computed tomographic angiography (CTA) of the donor site (left forearm), recipient site (right ankle), and the left ankle was performed. 2D data from the CTA was 3D-reconstructed using computer software, with a 3D image of the left ankle used as a "control." A 3D model was created by superimposing the left and right ankle images, to create a "reverse image" of the defect, and printed using a 3D printer. The RFFF was thus planned and executed effectively, without complication. To our knowledge, this is the first report of a mechanism of calculating a soft tissue wound defect and producing a 3D model that may be useful for surgical planning. 3D printing and particularly "reverse" modeling may be versatile options in reconstructive planning, and have the potential for broad application.

There is an increasing demand for successful free tissue transfer, with postoperative monitoring of flaps a key to early salvage. Monitoring methods have ranged from clinical techniques to invasive options, of which two are particularly applicable to buried flaps (Cook-Swartz Doppler probe and microdialysis). The evidence for these options has been represented largely in separate cohort studies, with no single study comparing these three techniques. We aim to perform this comparison in a single cohort of patients.A prospective, consecutive cohort study comparing clinical monitoring, microdialysis and the implantable Doppler probe was undertaken. In 20 patients receiving 22 flaps, 21 flaps were monitored with microdialysis, 18 flaps with clinical observation, and 21 flaps with the Cook-Swartz Implantable Doppler probe. Exclusion was based on applicability and availability intra-operatively. Efficacy was assessed through sensitivity, specificity, positive, and negative predictive values.Nineteen of 22 flaps had no suspected anastomotic problems; 3 of 22 flaps were explored for anastomotic problems, with two salvaged and one lost. The implantable Doppler and microdialysis were found to detect flap statistically earlier than clinical assessment, with microdialysis better at detecting flap compromise: 100% specificity (confidence interval 31-100%) when compared to the implantable probe and clinical assessment (67%: 13-98% and 33%: 2-87%, respectively).Each of the Cook-Swartz Doppler probe, microdialysis and clinical assessment was found suitable for monitoring in free tissue transfer. The implantable Doppler and microdialysis offer the potential for earlier detection of flap compromise.

Band slippage is a significant complication of laparoscopic adjustable gastric band (LAGB) surgery for the treatment of morbid obesity. This involves prolapse of part of the stomach, with varying degrees of gastric obstruction. The original perigastric technique (PGT) was associated with slippage rates of up to 25%. The pars flaccida technique (PFT) is the more commonly used technique today, reducing slippage rates to as low as 1.4%. We report a technique not previously described, the modified PFT with the use of mesh, and compare slippage rates between these three techniques for band placement.A prospectively entered, retrospective review of 1,446 consecutive patients undergoing LAGB by a single surgeon was undertaken. Patients were divided into five consecutive groups: PGT learning curve (PGTLC) (n = 68), PGT (n = 19), mesh PFT (MPFT) (n = 415), mesh plication PFT (MPPFT) (n = 131), and MPPFT with inadequate follow-up (n = 813). Patient characteristics, band slippage, and other complication rates were compared between groups.The slippage rates for each group were: PGTLC (10%), PGT (5%), MPFT (0.8%), and MPPFT (0%). This demonstrated a statistically significant difference between the slippage rates for each group (p0.001). Combining the MPFT and MPPFT groups, there was a statistically significant difference in band slippage compared to the PGT group (p0.001).While the MPFT is associated with low band slippage rates, the MPPFT results in further reductions in band slippage. The routine use of this modification to the MPFT is safe and may reduce operative morbidity. A randomized comparison of these techniques is warranted.

Lymphatic anatomy has become increasingly clinically important as surgical techniques evolve for investigating and treating cancer metastases. However, due to limited anatomical techniques available, research in this field has been insufficient. The techniques of computed tomography (CT) and magnetic resonance (MR) lymphangiography have not been described previously in the imaging of cadaveric lymphatic anatomy. This preliminary work describes the feasibility of these advanced imaging technologies for imaging lymphatic anatomy. A single, fresh cadaveric lower limb underwent lymphatic dissection and cannulation utilizing microsurgical techniques. Contrast materials for both CT and MR studies were chosen based on their suitability for subsequent clinical use, and imaging was undertaken with a view to mapping lymphatic anatomy. Microdissection studies were compared with imaging findings in each case. Both MR-based and CT-based contrast media in current clinical use were found to be suitable for demonstrating cadaveric lymphatic anatomy upon direct intralymphatic injection. MR lymphangiography and CT lymphangiography are feasible modalities for cadaveric anatomical research for lymphatic anatomy. Future studies including refinements in scanning techniques may offer these technologies to the clinical setting.