291 results on '"Wang, Zhuyi"'
Search Results
2. Surface atomic arrangement of primary particles through pre-oxidation to enhance the performance of LiNi0.8Co0.1Mn0.1O2 cathode materials
3. Synergetic coupling of hydrogen-bond bridge and multielectron redox towards stable and efficient lithium storage
4. Advances of high-performance LiNi1-x-yCoxMyO2 cathode materials and their precursor particles via co-precipitation process
5. Dynamic stable interface between CNT and nanosilicon for robust anode with large capacity and high rate performance
6. Synthesis of single-crystal LiNi0.8Co0.1Mn0.1O2 materials for Li-ion batteries by microfluidic technology
7. Spheroidization: The Impact of Precursor Morphology on Solid‐State Lithiation Process for High‐Quality Ultrahigh‐Nickel Oxide Cathodes
8. A cation-dipole-reinforced elastic polymer electrolyte enabling long-cycling quasi-solid-state lithium metal batteries
9. Enhanced rate capability and high-voltage cycling stability of single-crystal nickel-rich cathode by surface anchoring dielectric BaTiO3
10. Functional polyethylene separator with impurity entrapment and faster Li+ ions transfer for superior lithium-ion batteries
11. Ionic liquids for high performance lithium metal batteries
12. Multifunctional separators for high-performance lithium ion batteries
13. Highly-ordered microstructure and well performance of LiNi0.6Mn0.2Co0.2O2 cathode material via the continuous microfluidic synthesis
14. Electrodeposited AgAu nanoalloy enhancing photoelectric conversion efficiency of dye sensitized solar cells
15. Enhanced thermal stability and lithium ion conductivity of polyethylene separator by coating colloidal SiO2 nanoparticles with porous shell
16. A simple method to enhance the lifetime of Ni-rich cathode by using low-temperature dehydratable molecular sieve as water scavenger
17. Surface activated polyethylene separator promoting Li+ ion transport in gel polymer electrolytes and cycling stability of Li-metal anode
18. A 3 µm‐Ultrathin Hybrid Electrolyte Membrane with Integrative Architecture for All‐Solid‐State Lithium Metal Batteries.
19. In situ constructed Ag/C conductive network enhancing the C-rate performance of Si based anode
20. UV curable organic-inorganic hybrid coatings on microporous polyethylene separator for enhancing mechanical and electrochemical performance
21. Polyethylene separators modified by ultrathin hybrid films enhancing lithium ion transport performance and Li-metal anode stability
22. Nanocoating inside porous PE separator enables enhanced ionic transport of GPE and stable cycling of Li-metal anode
23. Advances of high-performance LiNi1-x-yCoxMyO2 cathode materials and their precursor particles via co-precipitation process
24. Polyethylene separator activated by hybrid coating improving Li+ ion transference number and ionic conductivity for Li-metal battery
25. Optical band structure and photogenerated carriers transfer dynamics in FTO/TiO2 heterojunction photocatalysts
26. Synthesis of anatase/brookite TiO2–Bi2WO6 multiheterojunction and its photocatalytic properties under visible-light irradiation
27. A simple and rapid route for synthesizing the nanosized g-C3N4 materials with narrow bandgap and their photocatalytic activity
28. Excellent rate capability and cycle life of Li metal batteries with ZrO2/POSS multilayer-assembled PE separators
29. Valence Band Edge Shifts and Charge-transfer Dynamics in Li-Doped NiO Based p-type DSSCs
30. Functional dielectric materials for high-performance solid‐state batteries
31. 基于遥感影像的城市建筑空间分布格局对热环境的影响研究——以济南市中心城区为例
32. Effects of acetyl acetone-typed co-adsorbents on the interface charge recombination in dye-sensitized solar cell photoanodes
33. Monitoring the Spatio-Temporal Distribution of Ulva prolifera in the Yellow Sea (2020–2022) Based on Satellite Remote Sensing
34. High‐Rate Organic Cathode Constructed by Iron‐Hexaazatrinaphthalene Tricarboxylic Acid Coordination Polymer for Li‐Ion Batteries
35. A simple and rapid route for synthesizing the nanosized g‐C3N4 materials with narrow bandgap and their photocatalytic activity
36. Fabrication of Ti-doped SnO2/RGO composites as anode materials with high stability for lithium-ion batteries
37. High electro-catalytic counter electrode based on three-dimensional conductive grid for dye-sensitized solar cell
38. Tuning the morphology, stability and photocatalytic activity of TiO2 nanocrystal colloids by tungsten doping
39. Synthesis of triphasic, biphasic, and monophasic TiO2 nanocrystals and their photocatalytic degradation mechanisms
40. Boosting the Temperature Adaptability of Lithium Metal Batteries via a Moisture/Acid‐Purified, Ion‐Diffusion Accelerated Separator
41. A simple route for decorating TiO2 nanoparticle over ZnO aggregates dye-sensitized solar cell
42. Photoelectrocatalytic properties of Cu2+-doped TiO2 film under visible light
43. Improved electron-collection performance of dye sensitized solar cell based on three-dimensional conductive grid
44. Hydrothermal synthesis and humidity sensing properties of size-controlled Zirconium Oxide (ZrO2) nanorods
45. Enhanced Storage and Interface Structure Stability of NCM811 Cathodes for Lithium-Ion Batteries by Hydrophobic Fluoroalkylsilanes Modification
46. The effect of Ni(CH3COO)2 post-treatment on the charge dynamics in p-type NiO dye-sensitized solar cells
47. Photoelectrocatalytic performance of TiO2 nanoparticles incorporated TiO2 nanotube arrays
48. Enhanced Storage and Interface Structure Stability of NCM811 Cathodes for Lithium‐Ion Batteries by Hydrophobic Fluoroalkylsilanes Modification
49. Amino acid-modified cyclodextrins as ligands for Heck reaction in water
50. 基于遥感影像的城市建筑空间分布格局对热环境的影响研究——以济南市中心城区为例
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.