Search

Bio-inspired macrostructure array (MAA, size: submillimeter to millimeter scale) materials with special wettability (MAAMs-SW) have attracted significant research attention due to their outstanding performance in many applications, including oil repellency, liquid/droplet manipulation, anti-icing, heat transfer, water collection, and oil–water separation. In this review, we focus on recent developments in the theory, design, fabrication, and application of bio-inspired MAAMs-SW. We first review the history of the basic theory of special wettability and discuss representative structures and corresponding functions of some biological surfaces, thus setting the stage for the design and fabrication of bio-inspired MAAMs-SW. We then summarize the fabrication methods of special wetting MAAs in terms of three categories: additive manufacturing, subtractive manufacturing, and formative manufacturing, as well as their diverse functional applications, providing insights into the development of these MAAMs-SW. Finally, the challenges and directions of future research on bio-inspired MAAMs-SW are briefly addressed. Worldwide efforts, progress, and breakthroughs from surface engineering to functional applications elaborated herein will promote the practical application of bio-inspired MAAMs-SW.

In this work, the localized electrochemical micro additive manufacturing technology based on the FluidFM (fluidic force microscope) has been introduced to fabricate micro three-dimensional overhang metal structures at sub-micron resolution. It breaks through the localized deposition previously achieved by micro-anode precision movement, and the micro-injection of the electrolyte is achieved in a stable electric field distribution. The structure of electrochemical facilities has been designed and optimized. More importantly, the local electrochemical deposition process has been analyzed with positive source diffusion, and the mathematical modeling has been revealed in the particle conversion process. A mathematical model is proposed for the species flux under the action of pulsed pressure in an innovatively localized liquid feeding process. Besides, the linear structure, bulk structure, complex structure, and large-area structure of the additive manufacturing are analyzed separately. The experimental diameter of the deposited cylinder structure is linearly fitted. The aspect ratio of the structure is greater than 20, the surface roughness value is between 0.1–0.2 μm at the surface of bulk structures, and the abilities are verified for deposition of overhang, hollow complex structures. Moreover, this work verifies the feasibility of 3D overhang array submicron structure additive manufacturing, with the application of pulsed pressure. Furthermore, this technology opens new avenues for the direct fabrication of nano circuit interconnection, tiny sensors, and micro antennas.

Reducing the contact time of a water droplet on non-wetting surfaces has great potential in the areas of self-cleaning and anti-icing, and gradually develops into a hot issue in the field of wettability surfaces. However, the existing literature on dynamic behavior of water drops impacting on superhydrophobic surfaces with various structural shapes is insufficient. Inspired by the microstructure of lotus leaf and rice leaf, dual-level and three-level structures on plane and convex surfaces were successfully fabricated by wire electrical discharge machining on aluminum alloy. After spraying hydrophobic nanoparticles on the surfaces, the plane and convex surfaces with dual-level and three-level structures showed good superhydrophobic property. Bouncing dynamics of impact droplets on the superhydrophobic surfaces wereinvestigated, and the results indicated that the contact time of plane superhydrophobic surface with a three-level structure was minimal, which is 60.4% less than the plane superhydrophobic surface with dual-level structure. The effect of the interval S, width D, and height H of the structure on the plane superhydrophobic surface with three-level structure on contact time was evaluated to obtain the best structural parameters for reducing contact time. This research is believed to guide the direction of the structural design of the droplet impinging on solid surfaces.

Meniscus-confined electrodeposition (MCED) is a potential approach to fabricate 3D metallic microstructures and can be used in microelectromechanical systems, optoelectronics, and flexible electrical interconnections. However, deposition efficiency and the quality of the microstructures obtained by this method on optimal parameters are identified by a large number of comparative experiments, resulting in high cost and inefficient practices. For this reason, herein, the fabrication process of metal microstructures by MCED simulation and optimizes parameters affecting deposition quality and rate is investigated. First, the finiteelement method is used to simulate the voltage and copper ion concentration identifies the target range. Then, the electrodeposition rate 1 × 10-7ms-1 is set as the target value. The best applicable values of 0.29 V and 0.46 M are obtained after optimizing the voltage and copper ion concentration that affects the quality of deposited microstructures and rate of MCED based on the genetic algorithm (GA), cuckoo search (CS) algorithm, and support vector regression (SVR) algorithm. Finally, simulations and experiments are carried out according to the optimized parameters values. The results show that the maximum error of deposition rate is 7.9%. This study pioneers a new approach to achieving efficient and high-quality deposition by MCED. [ABSTRACT FROM AUTHOR]