Search

HgIn2Te4 (Mercury indium telluride, MIT) is a promising mid-infrared CO2 laser candidate material. Through combining the calculation results of structural relaxation, Bader charge, electronic localization function, formation energy, and density of states, we systematically explored the stability and doping efficiency of gold (Au) in MIT. The results show that the Au-Te bond has a similar polar covalent characteristic as Hg-Te bond, which indicates the relative stability of Au dopant in MIT. In addition, two defect states were formed through the hybridization between the Au impurity and its nearest neighboring Te atoms in the substitutional doping systems of AuHg and AuIn. We found that the acceptor transition levels in AuHg and AuIn are 0.095 eV and 0.265 eV above the valance band maximum, respectively, whereas the donor transition level in the substitutional doping system of AuTe and interstitial system of AuI are 0.894 eV and 0.322 eV below the conduction band minimum, respectively. Meanwhile, in the Hg-rich condition, the Fermi level would be pinned about 0.511 eV above the valence band maximum due to the self-compensation effect; however, this effect will be efficiently reduced in the Te-rich condition. [ABSTRACT FROM AUTHOR]

Polylactic acid (PLA) has become a popular polymer material due to its superior biocompatibility. At present, there are a few relevant research on heterogeneous bone powder. Besides, the poor dispersibility and adhesivity of inorganic particles in the organic phase remains a problem. In this study, the pork bone powders were modified with N‐butanol to improve its dispersibility and compatibility in the PLA matrix. In addition, polybutylene succinate‐co‐terephthalates (PBSA) was applied as a flexibilizer to further reinforce the mechanical properties of materials. The composite filaments with a diameter of 1.75 ± 0.05 mm containing 10 wt% of modified bone powder, 10 wt% PBSA and 80 wt% PLA were prepared by a melt blending method. The obtained results showed that modified particles were uniformly dispersed within the PLA matrix and improved the mechanical properties of the composite filaments with a tensile strength of 48.5 ± 0.2 MPa and a bending strength of 79.1 ± 0.1 MPa and a notch impact strength of 15.8 ± 0.3 kJ/m2. And the prepared composite materials contained low cytotoxicity, high biocompatibility and printability, which verified the feasibility of it in 3D printing personalized bone repair applications. This provides a theoretical basis for further research on the effect of bone repair in vivo. Therefore, the composite material will have potential applications such as making customized bones and bone scaffolds by three dimensional printing technology. [ABSTRACT FROM AUTHOR]

Patients with non‐small‐cell lung cancer (NSCLC) are routinely treated with the platinum‐based chemotherapeutics such as cisplatin. The drug exerts anticancer effects via multiple mechanisms, including DNA double‐strand breaks (DSBs). Enhanced DNA DSB repair capacity would be associated with innate or acquired drug resistance. However, despite strong evidence for the role of the chromokinesin kinesin family member 4A (KIF4A) in DSB repair, the relationship between the chromokinesin and cisplatin sensitivity of human NSCLC cells remains unknown. Furthermore, little is known regarding the effect of targeting KIF4A on the function of DSB repair‐related proteins in these cells. In the current study, we demonstrated that cisplatin treatment stimulated the expression of KIF4A protein in human NSCLC cells. Depletion of KIF4A by small interfering RNA significantly enhanced cisplatin‐induced cell cycle arrest in S and G2/M phases and cytotoxicity in human NSCLC cells. Furthermore, we found that KIF4A inhibition suppressed the ability of cisplatin to induce BRCA2 and Rad51 focus formation and limits the further increase in poly(ADP‐ribose) polymerase 1 activity induced by cisplatin treatment in human NSCLC cells. These studies thus identify the chromokinesin KIF4A as a novel modulator of cisplatin sensitivity that is significantly enhanced by the chromokinesin in human NSCLC cells via multiple mechanisms. Cisplatin treatment stimulates the expression of kinesin family member 4A (KIF4A) protein in human non‐small‐cell lung cancer (NSCLC) cells. KIF4A knockdown suppresses the formation of BRCA2 and Rad51 foci and limits the further increase in poly(ADP‐ribose) polymerase 1 activity, thereby enhancing cisplatin‐induced cell cycle arrest in S and G2/M phases and cytotoxicity in human NSCLC cells. KIF4A functions as a novel modulator of cisplatin sensitivity in human NSCLC cells via multiple mechanisms. [ABSTRACT FROM AUTHOR]

A new class of multifunctional nanocomposites holds strong potential in three‐dimensional (3D) printing. In this study, SrAl2O4:Eu2+,Dy3+ powders with fluorescence property were modified with SiO2 to improve its dispersibility and compatibility in the polylactic acid (PLA) matrix. The composite filaments with a diameter of 1.75 ± 0.05 mm containing 2 wt % of modified particles were prepared by a melt blending method. The fluorescent analysis reveals that the composite filaments can be excited by light with a broad band of wavelength from 345 to 455 nm with the highest excitation intensity at 426 nm and have a major emission peak at 487 nm. The morphological analysis and mechanical performance testing on the printed samples showed that modified particles were uniformly dispersed within the PLA matrix and improved the mechanical properties of the composite filaments. Moreover, the modified particles improved hydrophobic behavior and antibacterial properties in comparison with unmodified composite. Therefore, the composite material will have potential applications such as making prototypes for customized furniture and accessories by 3D printing technology. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48644. [ABSTRACT FROM AUTHOR]

Background: Ferroptosis is associated with cancer progression and has a promising application for treating hepatocellular carcinoma (HCC). Long non-coding RNA (lncRNA) participates widely in the regulation of ferroptosis, but the key lncRNA regulators implicated in ferroptosis and their molecular mechanisms remain to be identified., Methods: Bioinformatic analysis was performed in R based on The Cancer Genome Atlas Program (TCGA) public database. The relative expression of genes was detected by real-time quantitative PCR. Cell viability was assessed by the CCK8 assay. The cell cycle and apoptosis were detected by flow cytometry. Migration and invasion of HCC cells were detected by Transwell assay and wound healing assay. Expression of relevant proteins was detected by Western blotting. A dual-luciferase reporter assay was used to detect interactions between PART1 (or SLC7A11) and miR-490-3p., Results: The PART1/miR-490-3p/SLC7A11 axis was identified as a potential regulatory pathway of ferroptosis in HCC. PART1 silencing reduced HCC cell proliferation, migration, and metastasis and promoted apoptosis and erastin-reduced ferroptosis. Further investigation revealed that PART1 acted as a competitive endogenous RNA (ceRNA) for miR-490-3p to enhance SLC7A11 expression. Overexpression of miR-490-3p downregulated the expression of SLC7A11, inhibiting the proliferation, invasion, and metastasis of HCC cells while promoting apoptosis and erastin-induced ferroptosis. Knockdown of PART1 in HCC cells significantly improved the sensitivity of HCC cells to sorafenib., Conclusion: Our results revealed that the PART1/miR-490-3p/SLC7A11 axis enhances HCC cell malignancy and suppresses ferroptosis, which provides a new perspective for understanding of the function of long chain non-coding RNAs in HCC. The PART1/miR-490-3p/SLC7A11 axis may be target for improving sorafenib sensitivity in HCC.

With the sulfate as the materials and NaOH as precipitator, Mn(0.4)Zn(0.6)Fe2O4 nanoparticles were produced, which are proved to be spinel Mn-Zn ferrite analyzed by X-ray diffraction(XRD). Their shapes are approximately global examined by transmission electron microscopy(TEM) and their average diameter is 50 nm measured with image analysis-system. The Curie temperature was measured and in vitro heating test in a alternating magnetic field was carried out. The results show that the Curie temperature is 105. 407 degrees C, While its magnetic fluid could rise to 43 degrees C - 47 degrees C due to different concentration in a alternating magnetic field. The result provide theoretical and practical evidence to select an appropriate material and concentration for tumor

Mn0.5Zn0.5Fe2O4 nano-particles were prepared by the chemical co-precipitation, their characteristics were observed with transmission electron microscope (TEM), X-ray diffractometer (XRD) and thermal analysis system, and etc. The temperature changes of the nano-particles of Mn0.5Zn0.5Fe2O4 and its magnetic fluid explored in radiofrequency(RF,200 KHz, 4 KW) were measured. The proliferation ratio of L929 cells cultured in soak of Mn0.5Zn0.5Fe2O4 nano-particles were observed. The experiment indicates that the magnetic particles were about 40 nm diameter in average, round, had strong magnetism, and were proved to be consistent with the standard data of chart of XRD. Its magnetic fluid exposed to RF could be heated up to temperature range from 40 degrees C to 51 degrees C due to the amount of the magnetic nano-particles and intensity of the alternating magnetic field. Magnetic nano-particles were found to have no obvious cytotoxicity to L929 cells.