Search

The Global Burden of Animal Diseases (GBADs) programme's key objective â€" to provide a systematic approach to determine the burden of animal disease â€" is as relevant to aquatic as to terrestrial animal production systems. However, to date GBADs methods have mainly been applied to terrestrial animal production systems. The challenges in applying GBADs methods, notably the Animal Health Loss Envelope (AHLE), vary considerably by production system. The authors demonstrate how the AHLE can be calculated for rainbow trout production in England and Wales and acknowledge that its application to other systems (e.g. hatchery production, polyculture and no-feed mollusc production) is more complex. For example, in small scale tropical fish production the impact of suboptimal nutrition on production would need to be addressed. Recirculating aquaculture systems have inherent high levels of biosecurity and disease control, and thus low levels of disease. Removing the capital and running costs associated with biosecurity fundamentally changes the system and invalidates the AHLE calculation. Lack of data from many systems, notably small-scale tropical finfish farming, means that expert opinion will be needed to support the application of GBADs methods. While calculation of the AHLE is the focus of this article, it should be noted that attribution to causes and value chain modelling are needed to generate data on the wider societal impact of aquatic animal diseases (and possible interventions), which governments require to support decision-making about resource allocation.

Introduction: Despite treatment advances, multiple myeloma (MM) remains a significant source of morbidity and mortality. We aimed to examine specialist palliative care (SPC) involvement and end-of-life care for patients with MM., Methods: We assessed all deceased patients with a diagnosis of MM who received care at a single institution from January 2010 to December 2019 and assessed SPC involvement., Results: We reviewed 456 deceased patients. Overall, 207 patients (45.4%) received SPC visits by clinicians during their disease, and 153 (33.5%) were on MM treatment in the month before death. Median time from SPC consultation to death was 1 month, with 42 (9.2%) of patients receiving SPC visits 6 or more months before death. Amongst the patients for which a place of death was reported (351), 117 (33.3%) died in the acute care setting. Outpatient SPC did not correlate with a reduction of death in the acute care setting. In the group of patients who received outpatient SPC, 22/84 (26.2%) died in an acute care setting, whereas 95/267 (35.5%) patients who did not receive outpatient SPC also died in an acute care setting, (p = .11)., Conclusion: In our analysis of the entire trajectory of the MM patient experience from diagnosis to death, we found low rates of SPC involvement and a significant proportion of patients receiving aggressive care at end-of-life. While there is no clear correlation that SPC involvement impacted the rate of acute care deaths or decreased utilization of MM treatment in the last month of life, further prospective research on optimal utilization of SPC is required., (© 2022 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Gas-atomized powders are frequently used in metal additive manufacturing (MAM) processes. During consolidation, certain properties and microstructural features of the feedstock can be retained. Such features include porosity, secondary phases, and oxides. Of particular importance to alloys such as Al 6061, secondary phases found in the feedstock powder can be directly related to those of the final consolidated form, especially for solid-state additive manufacturing. Al 6061 is a heat-treatable alloy that is commonly available in powder form. While heat treatments of 6061 have been widely studied in wrought form, little work has been performed to study the process in powders. This work investigates the evolution of the Fe-containing precipitates in gas-atomized Al 6061 powder through the use of scanning and transmission electron microscopy (SEM and TEM) and energy dispersive X-ray spectroscopy (EDS). The use of coupled EDS and thermodynamic modeling suggests that the as-atomized powders contain Al 13 Fe 4 at the microstructure boundaries in addition to Mg 2 Si. After one hour of thermal treatment at 530 °C, it appears that the dissolution of Mg 2 Si and Al 13 Fe 4 occurs concurrently with the formation of Al 15 Si 2 M 4 , as suggested by thermodynamic models.

This retrospective descriptive study estimates cage-level mortality distributions after six immediate delousing methods: thermal, mechanical, hydrogen peroxide, medicinal, freshwater and combination of medicinal treatments. We investigated mortality patterns associated with 4 644 delousing treatment of 1 837 cohorts of farmed Atlantic salmon (Salmo salar) stocked in sea along the Norwegian coast between 2014 and 2017. The mortality is expressed as mortality rates. We found distributions of delta mortality rate within 1, 7 and 14 days after all six delousing treatments, using mortality rate within 7 days before treatments as baseline. The results show that we can expect increased mortality rates after all six delousing methods. The median delta mortality rates after thermal and mechanical delousing are 5.4 and 6.3 times higher than medicinal treatment, respectively, for the 2017 year-class. There is a reduction in the delta median mortality for thermal and freshwater delousing from 2015 to 2019. There is a wide variability in the mortality rates, in particular for thermal delousing. Our results suggest that the variability in delta mortality for thermal delousing has been reduced from the 2014 to 2017 year-class, indicating an improvement of the technique. However, a significant increase in the number of thermal treatments from 14 in 2015 to 738 in 2018 probably contributes to the overall increased mortality in Norwegian salmon farming., (© 2021 The Authors. Journal of Fish Diseases published by John Wiley & Sons Ltd.)

Aluminum 5056 is a work-hardenable alloy known for its corrosion resistance with new applications in additive manufacturing. A good understanding of the secondary phases in Al 5056 powders is important for understanding the properties of the final parts. In this study, the effects of different thermal treatments on the microstructure of Al 5056 powder were studied. Thermodynamic models were used to guide the interpretation of the microstructure as a function of thermal treatment, providing insight into the stability of different possible phases present in the alloy. Through the use of transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS), combined with thermodynamic modeling, a greater understanding of the internal microstructure of Al 5056 powder has been achieved in both the as-atomized and thermally treated conditions. Evidence of natural aging within these powders was observed, which speaks to the shelf-life of these powders and the importance of proper treatment and storage to maintain consistent results.

On May 12, 2020 (day 0), a hair stylist at salon A in Springfield, Missouri (stylist A), developed respiratory symptoms and continued working with clients until day 8, when the stylist received a positive test result for SARS-CoV-2, the virus that causes coronavirus disease 2019 (COVID-19). A second hair stylist (stylist B), who had been exposed to stylist A, developed respiratory symptoms on May 15, 2020 (day 3), and worked with clients at salon A until day 8 before seeking testing for SARS-CoV-2, which returned a positive result on day 10. A total of 139 clients were directly serviced by stylists A and B from the time they developed symptoms until they took leave from work. Stylists A and B and the 139 clients followed the City of Springfield ordinance* and salon A policy recommending the use of face coverings (i.e., surgical masks, N95 respirators, † or cloth face coverings) for both stylists and clients during their interactions. Other stylists at salon A who worked closely with stylists A and B were identified, quarantined, and monitored daily for 14 days after their last exposure to stylists A or B. None of these stylists reported COVID-19 symptoms. After stylist B received a positive test result on day 10, salon A closed for 3 days to disinfect frequently touched and contaminated areas. After public health contact tracings and 2 weeks of follow-up, no COVID-19 symptoms were identified among the 139 exposed clients or their secondary contacts. The citywide ordinance and company policy might have played a role in preventing spread of SARS-CoV-2 during these exposures. These findings support the role of source control in preventing transmission and can inform the development of public health policy during the COVID-19 pandemic. As stay-at-home orders are lifted, professional and social interactions in the community will present more opportunities for spread of SARS-CoV-2. Broader implementation of masking policies could mitigate the spread of infection in the general population., Competing Interests: All authors have completed and submitted the International Committee of Medical Journal Editors form for disclosure of potential conflicts of interest. Robin Trotman reports personal fees from Merck outside the published work. No other potential conflicts of interest were disclosed.

Background: Most centres use fresh frozen plasma (FFP) based protocols to prevent or treat haemostatic disturbances during liver transplantation. In the present study, we used a rotational thrombelastometry (ROTEM™, TEM, Munich, Germany) guided haemostasis management with fibrinogen concentrates, prothrombin complex concentrates (PCC), platelet concentrates and tranexamic acid without FFP usage and determined the effect on 30 day mortality., Methods: Retrospective data analysis with 372 consecutive adult liver transplant patients performed between 2007 and 2011., Results: Thrombelastometry guided coagulation management resulted in a transfusion rate for fibrinogen concentrates in 50.2%, PCC in 18.8%, platelet concentrates in 21.2%, tranexamic acid in 4.5%, and red blood cell concentrates in 59.4%. 30 day mortality for the whole cohort was 14.2%. The univariate analyses indicated that nonsurvivors received significantly more fibrinogen concentrates, PCC, red blood cell concentrates, platelet concentrates, and infusion volume, and had a higher MELD score. However, association with mortality was weak as evidenced by receiver operating characteristic curve analyses. Further univariate analyses demonstrated, that up to 8 g of fibrinogen did not increase mortality compared to patients not receiving the coagulation factor. Multivariate analysis demonstrated that platelet concentrates (p = 0.0002, OR 1.87 per unit), infused volume (p = 0.0004, OR = 1.13 per litre), and MELD score (p = 0.024; OR 1.039) are independent predictors for mortality. Fibrinogen concentrates, PCC, and red blood cell concentrates were ruled out as independent risk factors., Conclusions: ROTEM™ guided substitution with fibrinogen concentrates and PCC does not negatively affect mortality after liver transplantation, while the well-known deleterious effect associated with platelet concentrates was confirmed.

The incidence of disease caused by Pasteurella sp. in farmed lumpsuckers in Norway has been steadily increasing in recent years, causing significant economic losses and fish welfare issues. The disease affects all life stages, both in hatcheries and after release into salmon cages. Therefore, it is important to establish robust challenge models, to be used for vaccine development. Exposure experiments via intramuscular and intraperitoneal injection underlined the high virulence of the bacteria, whereas the cohabitation and bath models allowed the chronic symptoms of the disease to be studied more accurately. Skin lesions and haemorrhage at the base of fins were observed in the more acute cases of the disease. Symptoms including white spots over the skin, especially around the eyes, characterized the chronic cases. The latter were most prominent from the bath challenge model. Histopathology indicated a systemic pattern of disease, whereas qPCR analysis from head kidney showed that bacteria may be present in survivor fish at the end of the challenges. In all the challenge models investigated, Pasteurella sp. was re-isolated from the fish, thus fulfilling Koch's postulates. These findings highlight the importance of screening of lumpsuckers prior to transfer to minimize the risks of carrying over asymptomatic carriers., (© 2018 John Wiley & Sons Ltd.)

Metallic powders are commonly used in additive manufacturing processes. While their post-process consolidated properties are widely studied, there is little research on the properties of the powders prior to consolidation. Understanding the powder characteristics before use in additive manufacturing processes could lead to fine-tuning properties of additively manufactured materials. The three-dimensional grain structure of metals can be useful in predicting their properties and microstructure. Powder particles are much smaller and more difficult to fixture and polish than their bulk counterparts, hence typical protocols are difficult to use when serially sectioning them. This method describes a recommendation as to how to fixture, mill, and image metallic powder particles using a Xe P-FIB to mill and take EBSD measurements. It is based on milling and imaging techniques used for bulk materials, but with the specific advantage of how to fixture the powder sample. Our modifications include: •the method of fixturing the specimen to the holder.•the method of protecting the sample during milling.

GreenPhylDB is a database designed for comparative and functional genomics based on complete genomes. Version 2 now contains sixteen full genomes of members of the plantae kingdom, ranging from algae to angiosperms, automatically clustered into gene families. Gene families are manually annotated and then analyzed phylogenetically in order to elucidate orthologous and paralogous relationships. The database offers various lists of gene families including plant, phylum and species specific gene families. For each gene cluster or gene family, easy access to gene composition, protein domains, publications, external links and orthologous gene predictions is provided. Web interfaces have been further developed to improve the navigation through information related to gene families. New analysis tools are also available, such as a gene family ontology browser that facilitates exploration. GreenPhylDB is a component of the South Green Bioinformatics Platform (http://southgreen.cirad.fr/) and is accessible at http://greenphyl.cirad.fr. It enables comparative genomics in a broad taxonomy context to enhance the understanding of evolutionary processes and thus tends to speed up gene discovery.

Objective: We wanted to obtain statistically relevant data about the efficiency of our method for the isolation of fetal nucleated red blood cells (NRBCs) from the maternal circulation., Methods: More than 600 samples were investigated using a triple density gradient followed by magnetic separation of anti-CD71-labeled cells, and yields and purities of recovered NRBCs were determined., Results: The enrichment effectivity as well as the morphological condition of cells was reproducibly good, if blood samples were enriched within 48 h after sampling. The efficacy was independent of various methodological parameters and our technique was superior to other magnetic cell-sorting techniques. Mean yields and purities of NRBCs increased with increasing gestational age, ranging from 100 to 1,000 cells per 40-ml blood sample and from 0.1 to 1%, respectively, from the 6th week of gestation to term. In pregnancies with preeclampsia NRBCs were increased by a factor of 10., Conclusion: Our enrichment technique proved to be optimized with respect to various methodological parameters, which were compared in the present study, and it is efficient and reproducible for the enrichment of NRBCs from the maternal circulation in all three gestational trimesters.

Problem: The need for an inexpensive and reproducible technique for noninvasive prenatal diagnosis by fetal cell isolation from maternal blood., Method: For enrichment of fetal cells we used a combination of triple density gradient and magnetic sorting (MACS) of (anti-CD71) transferrin receptor antibody labeled cells followed by fluorescence in situ hybridization (FISH) with chromosome-specific DNA probes for detection of fetal aneuploidies. We identified 15 cases of fetal trisomy (five cases with a trisomy 18 and ten cases with a trisomy 21) with subsequent chromosome-specific FISH., Results: We found in all of the aneuploid pregnancies that the percentage of cells with three hybridization signals did not overlap with those of normal controls independent from gestational ages and previous invasive procedures., Conclusions: Our new approach for noninvasive prenatal diagnosis has proven to be reliable in this first series.