Search

Microbially influenced corrosion (MIC) is a potentially critical degradation mechanism for a wide range of materials exposed to environments that contain relevant microorganisms. The likelihood and rate of MIC are affected by microbiological, chemical, and metallurgical factors; hence, the understanding of the mechanisms involved, verification of the presence of MIC, and the development of mitigation methods require a multidisciplinary approach. Much of the recent focus in MIC research has been on the microbiological and chemical aspects, with less attention given to metallurgical attributes. Here, we address this knowledge gap by providing a critical synthesis of the literature on the metallurgical aspects of MIC of carbon steel, a material frequently associated with MIC failures and widely used in construction and infrastructure globally. The article begins by introducing the process of MIC, then progresses to explore the complexities of various metallurgical factors relevant to MIC in carbon steel. These factors include chemical composition, grain size, grain boundaries, microstructural phases, inclusions, and welds, highlighting their potential influence on MIC processes. This review systematically presents key discoveries, trends, and the limitations of prior research, offering some novel insights into the impact of metallurgical factors on MIC, particularly for the benefit of those already familiar with other aspects of MIC. The article concludes with recommendations for documenting metallurgical data in MIC research. An appreciation of relevant metallurgical attributes is essential for a critical assessment of a material's vulnerability to MIC to advance research practices and to broaden the collective knowledge in this rapidly evolving area of study., Competing Interests: The authors declare no conflicts of interest.

Background: We sought to understand the relative risk of COVID-19 infection and identify risk factors for infection to identify targets for mitigation among medical students., Methods: An observational cohort study of Johns Hopkins School of Medicine students was conducted from June 2020 to July 2021. Blood samples were collected and tested at three visits to assess for antibodies against SARS-CoV-2. Additionally, a questionnaire was administered at each visit to collect demographic information and assess potential social and behavioral risk factors., Results: 264 students enrolled in the study, and 38 participants completed all study requirements by study end. Roughly 6% of the first- and second-year classes had a reported positive COVID-19 test compared to 5% of third- and fourth-year students. By visit 3, 92% of medical students had detectable antibodies against COVID-19 compared to 4% during the study enrollment period. From study enrollment to visit 3, there was a 10-fold increase in the percentage of students reporting attending large social gatherings and dining in restaurants., Conclusions: Overall, few COVID-19 cases were found among medical students, even those on clinical rotations. As the study progressed, students reported engaging in higher-risk social behaviors in conjunction with increasing vaccination rates among students., (© 2024. The Author(s).)

The performance and lifespan of cutting tools are significantly influenced by their surface quality. The present report highlights recent advances in enhancing the surface characteristics of tungsten carbide and high-speed steel cutting tools using a novel micro-machining technique for polishing and edge-honing. Notably, the main aim was to reduce the surface roughness while maintaining the hardness of the materials at an optimal level. By conducting a thorough analysis of surfaces obtained using different techniques, it was found that the micro-machining method effectively decreased the surface roughness of the cutting tools the most effectively out of the techniques investigated. Significantly, the surface roughness was reduced from an initial measurement of 400 nm to an impressive value of 60 nm. No significant change in hardness was observed, which guarantees the maintenance of the mechanical properties of the cutting tools. This analysis enhances the comprehension of surface enhancement methodologies for cutting tools through the presentation of these findings. The observed decrease in surface roughness, along with the consistent hardness, exhibits potential for improving tool performance. These enhancements possess the capacity to optimise manufacturing processes, increase tool reliability, and minimise waste generation.

Background: We sought to understand the relative risk of COVID-19 infection and identify risk factors for infection to identify targets for mitigation among medical students., Methods: An observational cohort study of Johns Hopkins School of Medicine students was conducted from June 2020 to July 2021. Blood samples were collected and tested at three visits to assess for the presence of antibodies against SARS-CoV-2. Additionally, a questionnaire was administered at each visit to collect demographic information and assess potential social and behavioral risk factors., Results: 264 students enrolled in the study, and 38 participants completed all study requirements by study end. Roughly 6% of the first- and second-year classes had a reported positive COVID-19 test compared to 5% of third- and fourth-year students. By visit 3, 92% of medical students had detectable antibodies against COVID-19 compared to 4% during the study enrollment period. From study enrollment to visit 3, there was a 10-fold increase in the percentage of students reporting attending large social gatherings and dining in restaurants., Conclusions: Overall, few COVID-19 cases were found among medical students, even those on clinical rotations. As the study progressed, students reported engaging in higher-risk social behaviors in conjunction with increasing vaccination rates among students., Competing Interests: Competing interests: The authors declare that they have no competing interests.

Microbiologically influenced corrosion (MIC) is a phenomenon of increasing concern that affects various materials and sectors of society. MIC describes the effects, often negative, that a material can experience due to the presence of microorganisms. Unfortunately, although several research groups and industrial actors worldwide have already addressed MIC, discussions are fragmented, while information sharing and willingness to reach out to other disciplines are limited. A truly interdisciplinary approach, which would be logical for this material/biology/chemistry-related challenge, is rarely taken. In this review, we highlight critical non-biological aspects of MIC that can sometimes be overlooked by microbiologists working on MIC but are highly relevant for an overall understanding of this phenomenon. Here, we identify gaps, methods, and approaches to help solve MIC-related challenges, with an emphasis on the MIC of metals. We also discuss the application of existing tools and approaches for managing MIC and propose ideas to promote an improved understanding of MIC. Furthermore, we highlight areas where the insights and expertise of microbiologists are needed to help progress this field., (© The Author(s) 2023. Published by Oxford University Press on behalf of FEMS.)

COVID-19 vaccines are an effective public health intervention to reduce COVID-19-related morbidity and mortality. Given that pregnant and lactating women have a higher risk of severe COVID-19 complications, it is paramount to understand the factors that inform vaccine decision-making among this population. In this study, we sought to identify facilitators and barriers to COVID-19 vaccine acceptance and vaccine promotion in pregnant and lactating women in Bangladesh. We conducted 40 in-depth interviews with 12 pregnant women, 12 lactating women, and 16 health workers from one urban and four rural communities in Bangladesh. We used a grounded theory approach to identify emerging themes. Our results suggest that health workers and religious leaders played key roles in promoting COVID-19 vaccines in this population. Further, we found that the culture of trust in public health authorities and the existing vaccine infrastructure facilitated vaccine promotion. However, changes in vaccine eligibility and myths and rumors acted as both facilitators and barriers to vaccine promotion within our study. It is crucial that maternal immunization vaccine promotion efforts push pregnant and lactating women toward vaccine acceptance to protect the health of mothers and their babies. Additionally, as new maternal vaccines are developed and licensed, understanding how to best promote vaccines within this group is paramount.

Cathodic protection (CP), an electrochemical method for managing corrosion, is widely used in many industries in both marine and buried environments. However, literature surrounding cathodic protection and its ability to prevent microbially influenced corrosion (MIC) is mixed. This review describes the mechanics of CP, how CP may influence MIC, and collates and summarises tests on CP and MIC reported in literature. The aim of the review is to identify any trends and knowledge gaps requiring further study. While the outcomes of CP testing are generally mixed, some trends can be seen and, overall, MIC is detrimental to the protective effects of CP, with CP being less effective when used according to current international standards. Tests conducted in the field or with mix communities of microbes showed that CP could be effective at preventing MIC, while tests with sulfate-reducing bacteria generally proved CP to be highly ineffective. It was commonly seen that the effectiveness of CP can be improved by increasing polarization, to potentials as low as -1000 mV (Ag/AgCl). However, a balance does need to be met via careful monitoring to ensure negative side effects of over protection do not become a major problem.

Multidisciplinary team (MDT) meetings are the mainstay of the decision-making process for patients presenting with complex clinical problems such as papillary thyroid carcinoma (PTC). Adherence to guidelines by MDTs has been extensively investigated; however, scarce evidence exists on MDT performance and variability where guidelines are less prescriptive. We evaluated the consistency of MDT management recommendations for T1 and T2 PTC patients and explored key variables that may influence therapeutic decision making. A retrospective review of the prospective database of all T1 and T2 PTC patients discussed by the MDT was conducted between January 2016 and May 2021. Univariate analysis (with Bonferroni correction significance calculated at p < 0.006) was performed to establish clinical variables linked to completion thyroidectomy and Radioactive iodine (RAI) recommendations. Of 468 patients presented at thyroid MDT, 144 pT1 PTC and 118 pT2 PTC met the selection criteria. Only 18% ( n = 12) of pT1 PTC patients initially managed with hemithyroidectomy were recommended completion thyroidectomy. Mean tumour diameter was the only variable differing between groups ( p = 0.003). pT2 patients were recommended completion thyroidectomy in 66% ( n = 16) of instances. No measured variable explained the difference in recommendation. pT1 patients initially managed with total thyroidectomy were not recommended RAI in 71% ( n = 55) of cases with T1a status ( p = 0.001) and diameter ( p = 0.001) as statistically different variables. For pT2 patients, 60% ( n = 41) were recommended RAI post-total thyroidectomy, with no differences observed among groups. The majority of MDT recommendations were concordant for patients with similar measurable characteristics. Discordant recommendations for a small group of patients were not explained by measured variables and may have been accounted for by individual patient factors. Further research into the MDT decision-making process is warranted.

One of the key areas in which microbially influenced corrosion (MIC) has been found to be a problem is in the bilges of maritime vessels. To establish effective biological monitoring protocols, baseline knowledge of the temporal and spatial biological variation within bilges, as well as the effectiveness of different sampling methodologies, is critical. We used 16S rRNA gene metabarcoding of pelagic and sessile bacterial communities from ship bilges to assess the variation in bilge bacterial communities to determine how the inherent bilge diversity could guide or constrain biological monitoring. Bilge communities exhibited high levels of spatial and temporal variation, with >80% of the community able to be turned over in the space of 3 months, likely due to disturbance events such as cleaning and maintenance. Sessile and pelagic communities within a given bilge were also inherently distinct, with dominant exact sequence variants (ESVs) rarely shared between the two. Taxa containing KEGG orthologies (KOs) associated with dissimilatory sulfate reduction and biofilm production, functions typically associated with MIC, were generally more prevalent in sessile communities. Collectively, our findings indicate that neither bilge water nor an unaffected bilge from within the same vessel would constitute an appropriate reference community for MIC diagnosis. Optimal sampling locations and strategies that could be incorporated into a standardized method for monitoring bilge biology in relation to MIC were identified. Finally, taxonomic and functional comparisons of bilge diversity highlight the potential of functional approaches in future biological monitoring of MIC and MIC mitigation strategies in general. IMPORTANCE Microbially influenced corrosion (MIC) has been estimated to contribute 20 to 50% of the costs associated with corrosion globally. Diagnosis and monitoring of MIC are complex problems requiring knowledge of corrosion rates, corrosion morphology, and the associated microbiology to distinguish MIC from abiotic corrosion processes. Historically, biological monitoring of MIC utilized a priori knowledge to monitor sulfate-reducing bacteria; however, it is becoming widely accepted that a holistic or community-level understanding of corrosion-associated microbiology is needed for MIC diagnosis and monitoring. Before biology associated with MIC attack can be identified, standardized protocols for sampling and monitoring must be developed. The significance of our research is in contributing to the development of robust and repeatable sampling strategies of bilges, which are required for the development of standardized biological monitoring methods for MIC. We achieve this via a biodiversity survey of bilge communities and by comparing taxonomic and functional variation.

The rapid degradation of marine infrastructure at the low tide level due to accelerated low-water corrosion (ALWC) is a problem encountered worldwide. Despite this, there is limited understanding of the microbial communities involved in this process. We obtained samples of the orange-colored tubercles commonly associated with ALWC from two different types of steel sheet piling, located adjacent to each other but with different levels of localized corrosion, at a seaside harbor. The microbial communities from the outer and inner layers of the orange tubercles and from adjacent seawater were studied by pure culture isolation and metabarcoding of the 16S rRNA genes. A collection of 119 bacterial isolates was obtained from one orange tubercle sample, using a range of media in anaerobic and aerobic conditions. The metabarcoding results showed that sulfur and iron oxidizers were more abundant on the outer sections of the orange tubercles compared to the inner layers, where Deltaproteobacteria (which include many sulfate reducers) were more abundant. The microbial communities varied significantly between the inner and outer layers of the orange tubercles and also with the seawater but overall did not differ significantly between the two steel sheet types. Hence, we saw similar microbial communities in orange tubercles present, but different levels of localized corrosion, for two different types of colocated steel sheet piling. Metallurgical analysis found differences in composition, grain size, ferrite-pearlite ratio, and the extent of inclusions present between the two steel types investigated. IMPORTANCE The presence of orange tubercles on marine steel pilings is often used as an indication that accelerated low-water corrosion is taking place. We studied the microbial communities in attached orange tubercles on two closely located sheet pilings that were of different steel types. The attached orange tubercles were visually similar, but the extents of underlying corrosion on the different steel surfaces were substantially different. No clear difference was found between the microbial communities present on the two different types of sheet piling. However, there were clear differences in the microbial communities in the corrosion layers of tubercles, which were also different from the microbes present in adjacent seawater. The overall results suggest that the presence of orange tubercles, a single measurement of water quality, or the detection of certain general types of microbes (e.g., sulfate-reducing bacteria) should not be taken alone as definitive indications of accelerated corrosion., (Copyright © 2020 American Society for Microbiology.)

The use of sulfate reducing bacteria (SRBs) in laboratory studies is a common approach for investigating microbially influenced corrosion (MIC). The characteristic formation of black iron sulfide precipitates during SRB growth, however, preclude the use of traditional spectrophotometric approaches for capturing growth data instead necessitating labour-intensive or technically specialized approaches. As such, an understanding of SRB growth responses to experimental conditions is often missing from MIC studies. Bernardez and de Andrade Lima (2015) have outlined a spectrophotometric approach for estimating SRB cell mass via the addition of HCl. This method has potential for the study SRB growth however its applicability is currently limited by the use of large aliquot volumes (45 mL), which restrict the number of timepoints that can sampled from one culture, and the extensive time devoted to cell preparation prior to OD readings. •We demonstrate an improved method for capturing SRB growth data via spectrophotometry following acidification. We incorporate lower sample volumes and adapt the method described in Bernardez and de Andrade Lima (2015) to a high throughput microtiter plate approach that increases the efficiency of this method and its applicability to growth rate studies.•Our results allay theoretical concerns that acidification may distort growth rate analysis by impacting cells differently depending on their metabolic state.•We further demonstrate that this method (acid-amended OD measurements) is more accurate and far more cost efficient than traditional methods (dilution spread-plate counting) and popular molecular methods (quantitative PCR) currently in use in SRB growth research., (© 2019 The Authors.)

Accelerated low water corrosion (ALWC) is a form of microbiologically influenced corrosion (MIC) associated with the degradation of marine structures around the low tide water level. A better understanding of the role of microbes in this degradation and the source of these microbes is required to improve the prediction and mitigation of the costly failures occurring due to ALWC. The microbial communities present in a sediment sample and on an ALWC tubercle on adjacent steel sheet piling from a tidal estuary were studied using culture-based isolation and metabarcoding. A total of 43 pure cultures were isolated from the sediment using a variety of culture conditions. Phylogenetic analysis of their 16S rRNA genes placed them in the Actinobacteria, Bacteroidetes, Firmicutes, and Proteobacteria (Alphaproteobacteria and Gammaproteobacteria). 16S rRNA gene metabarcoding of the sediment and tubercle revealed similar microbial groups at varying relative abundances. No Deltaproteobacteria were isolated from the sediment but they were present in both samples according to metabarcoding and their high abundance (49.3%) in the tubercle could indicate an important functional role. Although some sediment isolates and operational taxonomic units from the metabarcoding have previously been associated with surface colonisation or biofilm formation in MIC, there was no strong evidence for the notion that the sediment adjacent to ALWC was the source of tubercle microbes. Further isolation strategies and functional investigations of representative bacteria at different stages of corrosion are being carried out for additional laboratory-based corrosion studies.

Maritime hydraulic components are often exposed to harsh environmental conditions which can lead to accelerated deterioration, reduced function, equipment failure and costly repair. Two leading causes of maritime hydraulic failure are biofouling accumulation and corrosion. This study examined the antifouling performance of three candidate replacement high velocity oxygen fuel (HVOF) coatings relative to the performance of the current baseline air plasma spray (APS) ceramic coating for protection of hydraulic actuators. Following 20 weeks immersion at tropical and temperate field exposure sites, the control APS ceramic accumulated significantly greater levels of biofouling compared to the HVOF coatings. More specifically, the magnitude of growth of real-world nuisance hard fouling observed on in-service hydraulic components (eg calcareous tubeworms and encrusting bryozoans) was significantly greater on the APS ceramic relative to HVOF coatings. Possible explanations for the observed patterns include differences in surface topography and roughness, the electrochemical potential of the surfaces and the colour/brightness of the coatings.

Surface translocation by the soil bacterium Myxococcus xanthus is a complex multicellular phenomenon that entails two motility systems. However, the mechanisms by which the activities of individual cells are coordinated to manifest this collective behaviour are currently unclear. Here we have developed a novel assay that enables detailed microscopic examination of M. xanthus motility at the interstitial interface between solidified nutrient medium and a glass coverslip. Under these conditions, M. xanthus motility is characterised by extensive micro-morphological patterning that is considerably more elaborate than occurs at an air-surface interface. We have found that during motility on solidified nutrient medium, M. xanthus forges an interconnected furrow network that is lined with an extracellular matrix comprised of exopolysaccharides, extracellular lipids, membrane vesicles and an unidentified slime. Our observations have revealed that M. xanthus motility on solidified nutrient medium is a stigmergic phenomenon in which multi-cellular collective behaviours are co-ordinated through trail-following that is guided by physical furrows and extracellular matrix materials.

Incorporating optical fibres in cochlear electrode arrays has been proposed to provide sensors to help minimise insertion trauma and also for the delivery of light in optical nerve stimulation applications. However, embedding an optical fibre into an electrode array may change its stiffness properties, which can affect the level of trauma during insertion. This report uses measurements of buckling and deflection force to compare the stiffness properties of a range of cochlear electrode arrays (Nucleus straight array, rat array, cat array and guinea pig array) with custom arrays containing an embedded optical fibre. The cladding diameters of the optical fibres tested were 125 µm, 80 µm and 50 µm. The results show that the stiffness of the optical-fibre-embedded arrays is related to the diameter of the optical fibre. Comparison with wired arrays suggests optical fibres with a diameter of 50 µm could be embedded into an electrode array without significantly changing the stiffness properties of the array., (Copyright © 2015 IPEM. Published by Elsevier Ltd. All rights reserved.)

Differential interference contrast images of various optical fibers and optical fiber Bragg gratings (FBGs), written with the phase mask technique, are presented to provide information about the resultant refractive index variations present in each case. Use of different fiber types using two distinct phase masks producing four Type I FBGs and a Type In FBG allowed similarities and differences in these FBG images due to variations in the Talbot diffraction patterns produced to be studied.

The influence of the composition and microstructure of different carbon steel grades on the initial attachment (≤ 60 min) of Escherichia coli and subsequent longer term (28 days) corrosion was investigated. The initial bacterial attachment increased with time on all grades of carbon steel. However, the rate and magnitude of bacterial attachment varied on the different steel grades and was significantly less on the steels with a higher pearlite phase content. The observed variations in the number of bacterial cells attached across different steel grades were significantly reduced by applying a fixed potential to the steel samples. Longer term immersion studies showed similar levels of biofilm formation on the surface of the different grades of carbon steel. The measured corrosion rates were significantly higher in biotic conditions compared to abiotic conditions and were found to be positively correlated with the pearlite phase content of the different grades of carbon steel coupons.

At present there is some debate as to the processes by which infrared neural stimulation (INS) activates neurons in the cochlea, as the lasers used for INS can potentially generate a range of secondary stimuli e.g. an acoustic stimulus is produced when the light is absorbed by water. To clarify whether INS in the cochlea requires functioning hair cells and to explore the potential relevance to cochlear implants, experiments using INS were performed in the cochleae of both normal hearing and profoundly deaf guinea pigs. A response to laser stimulation was readily evoked in normal hearing cochlea. However, no response was evoked in any profoundly deaf cochleae, for either acute or chronic deafening, contrary to previous work where a response was observed after acute deafening with ototoxic drugs. A neural response to electrical stimulation was readily evoked in all cochleae after deafening. The absence of a response from optical stimuli in profoundly deaf cochleae suggests that the response from INS in the cochlea is hair cell mediated., (Copyright © 2015 Elsevier B.V. All rights reserved.)

An optical fiber-based sensor has been developed to measure the forces at the tip of an electrode array during insertion into the cochlea. The sensor, utilizing optical fiber Bragg grating technology, was incorporated into a custom-designed Pt-banded electrode array for guinea pigs. In vivo experiments were undertaken in which forces at the tip of the array were measured in real time during the insertion. Data were obtained for maximum insertion forces of up to 254 mN. Histology was performed on the excised cochleae with the sensors fixed in position to evaluate the level of insertion trauma. The insertion experiments demonstrated a clear correlation between the applied force and collateral tissue damage.

A model to simulate heating as a result of pulse repetitions during infrared neural stimulation (INS), with both single- and multiple-emitters is presented. This model allows the temperature increases from pulse trains rather than single pulses to be considered. The model predicts that using a stimulation rate of 250 Hz with typical laser parameters at a single stimulation site results in a temperature increase of 2.3°C. When multiple stimulation sites are used in analogy to cochlear implants, the temperature increases further depending upon the spacing between emitters. However, when the light is more localized at multiple stimulation sites the temperature increase is reduced.

Bacterial biofilms are complex multicellular communities that are often associated with the emergence of large-scale patterns across the biofilm. How bacteria self-organize to form these structured communities is an area of active research. We have recently determined that the emergence of an intricate network of trails that forms during the twitching motility mediated expansion of Pseudomonas aeruginosa biofilms is attributed to an interconnected furrow system that is forged in the solidified nutrient media by aggregates of cells as they migrate across the media surface. This network acts as a means for self-organization of collective behavior during biofilm expansion as the cells following these vanguard aggregates were preferentially confined within the furrow network resulting in the formation of an intricate network of trails of cells. Here we further explore the process by which the intricate network of trails emerges. We have determined that the formation of the intricate network of furrows is associated with significant remodeling of the sub-stratum underlying the biofilm. The concept of stigmergy has been used to describe a variety of self-organization processes observed in higher organisms and abiotic systems that involve indirect communication via persistent cues in the environment left by individuals that influence the behavior of other individuals of the group at a later point in time. We propose that the concept of stigmergy can also be applied to describe self-organization of bacterial biofilms and can be included in the repertoire of systems used by bacteria to coordinate complex multicellular behaviors.

Metallurgical features have been shown to play an important role in the attachment of microorganisms to metal surfaces. In the present study, the influence of the microstructure of as-received (AR) and heat-treated (HT) 1010 carbon steel on the initial attachment of bacteria was investigated. Heat treatment was carried out with the aim of increasing the grain size of the carbon steel coupons. Mirror-polished carbon steel coupons were immersed in a minimal medium inoculated with Escherichia coli (ATCC 25922) to investigate the early (15, 30 and 60 min) and relatively longer-term (4 h) stages of bacterial attachment. The results showed preferential colonisation of bacteria on the grain boundaries of the steel coupons. The bacterial attachment to AR steel coupons was relatively uniform compared to the HT steel coupons where an increased number of localised aggregates of bacteria were found. Quantitative analysis showed that the ratio of the total number of isolated (i.e., single) bacteria to the number of bacteria in aggregates was significantly higher on the AR coupons than the HT coupons. Longer-term immersion studies showed production of extracellular polymeric substances by the bacteria and corrosion at the grain boundaries on both types of steel coupon tested.

A model of infrared neural stimulation (INS) has been developed to allow the temporal characteristics of different stimulation parameters and geometries to be better understood. The model uses a finite element approach to solve the heat equation and allow detailed analysis of heat during INS with both microsecond and millisecond laser pulses. When compared with experimental data, the model provides insight into the mechanisms behind INS. In particular, the analysis suggests that there may be two broad regimes of INS: the process tends to be limited by the total pulse energy for pulse lengths below 100 μs, while the temperature gradient with respect to time becomes more important above 100 μs.

Effects of fabrication conditions on the double-peak structure observed in fiber Bragg gratings at harmonics of the Bragg wavelength were investigated, showing that slight variations in the alignment of the phase mask can affect the grating spectra significantly. A single peak occurs only when the incident beam direction is perfectly normal with respect to the fiber.

A Monte Carlo model has been developed to simulate light transport and absorption in neural tissue during infrared neural stimulation (INS). A range of fiber core sizes and numerical apertures are compared illustrating the advantages of using simulations when designing a light delivery system. A range of wavelengths, commonly used for INS, are also compared for stimulation of nerves in the cochlea, in terms of both the energy absorbed and the change in temperature due to a laser pulse. Modeling suggests that a fiber with core diameter of 200 μm and NA=0.22 is optimal for optical stimulation in the geometry used and that temperature rises in the spiral ganglion neurons are as low as 0.1°C. The results show a need for more careful experimentation to allow different proposed mechanisms of INS to be distinguished.

The growth of reflectance peaks from optical fiber Bragg gratings has been studied to determine the relative importance of grating features when writing with the phase-mask technique. Measurements of spectra for two different fiber types using two distinct phase masks allowed the contribution from grating features of half the phase-mask periodicity and of the phase-mask periodicity at the Bragg wavelength to be determined. The dominance of the latter periodicity was ascribed to either the small fiber core diameter that limited the extent of the Talbot diffraction pattern, or the enhanced ±2 diffraction orders of a custom-made phase mask used.

A detailed investigation has been undertaken into the transmission mode of the matched fiber Bragg grating interrogation scheme with respect to its use in optical fiber sensor applications. Analytical and numerical models of the scheme have been developed. Experimental studies presented include the effect of the spectral characteristics of the gratings on system performance, results of strain and compression calibrations, a scheme to correct for intensity fluctuations, and the correction of temperature-induced shifts by collocating sensor and reference gratings. The results are in good agreement with a simplified model of the transmission mode. The analysis provides quantitative relationships between key sensor design parameters, such as sensitivity and measurement range as a function of grating bandwidth.