Search

Introduction : Superior screw insertion in reverse shoulder arthroplasty (RSA) carries the potential risk of suprascapular injury. The purpose of this study was to evaluate how the baseplate position affects the superior screw position and length in RSA. Methods : Three-dimensional (3D) computer simulation models of RSA were established using computed tomography data of baseplates with superior and inferior screws and 3D scapular models from 10 fresh cadavers. Superior screw position, the distance from the superior screw hole to the suprascapular notch, and the screw lengths were measured and compared among various baseplate positions with two inferior tilts (0 and 10 degrees) and three rotational patterns (11-5, 12-6, and 1-7 o'clock in the right shoulder). Results : For the 1-7 o'clock / inferior tilt 0 degrees baseplate, the superior screw located anterior to the SS notch in all shoulders, the distance to the SS notch was the longest (12.8 mm), and the inferior screw length was the shortest (23.1 mm). Conclusion : Although there is a concern of a short inferior screw length, initial fixation using a baseplate with 1-7 o'clock rotation and an inferior tilt of 0 degrees appears preferable for SS nerve injury prevention during superior screw insertion. J. Med. Invest. 69 : 185-190, August, 2022.

The purpose of this study was to determine the optimal position of the baseplate on the small glenoid of female Japanese. Two sets of 3D scapular models were made according to the CT data of 7 female cadavers. We set two scenarios of the baseplate placement : A and B. In scenario A, the baseplate was placed on the glenoid face centrally in the anteroposterior direction. In scenario B, the baseplate was implanted at the point where the baseplate post was contained within the glenoid vault. Whether or not the baseplate post perforated the scapular neck was recorded. In scenario A, the central post penetrated the scapular neck posteriorly in 5 scapulae. In scenario B, the average distances from the guide pin position to the anterior glenoid rim was 9.7 ± 1.7 mm and the optimal position of the guide pin was 1.9 ± 1.7 mm anterior from the glenoid center. The central post was contained within the scapula without breakage of the cortex. This study demonstrated that shifting the center of the baseplate slightly anterior to the anatomic center is necessary to avoid perforation of the scapular neck in small female Japanese.

Background: Soft tissue balancing in bicruciate-retaining (BCR) total knee arthroplasty (TKA) is a challenge that must be overcome to achieve excellent clinical outcomes. However, the optimal degree of joint laxity has yet to be clarified. This cadaveric study sought to examine joint laxity after BCR TKA using a navigation system. Methods: Knee joint laxity was quantified using an image-free navigation system in 8 intact fresh frozen cadavers under three conditions: the native knee, BCR TKA knee, and BCR TKA knee after anterior cruciate ligament resection. Rotational kinematics in the BCR TKA knee during flexion were compared according to whether joint laxity was increased or decreased. Results: Knee joint laxity after BCR TKA under varus-valgus movement, anterior translation, and internal-external rotation loadings was similar to that of the native knee. However, lateral joint laxity was decreased during flexion in some cases. BCR TKA-treated knees with decreased lateral joint laxity at 90° of flexion demonstrated more limited tibial internal rotation in deep flexion than the native knee (p < 0.05). The loss of internal rotation in deep flexion was partly recovered by using a lateral insert with a posterior slope of +3°. Conclusions: Restoring optimal joint laxity was not always straightforward in BCR TKA if the 4 ligaments were preserved. Lateral joint laxity was potentially decreased in BCR TKA and may result in kinematic conflict during flexion. Surgeons should be aware of the need to achieve sufficient lateral joint laxity in this type of BCR TKA.

Background: Quadriceps strength recovery after anterior cruciate ligament (ACL) reconstruction is an important criterion for progress in rehabilitation and return to sports. The purpose of this study was to determine whether quadriceps strength to body weight ratio (QS/BW) is a significant indicator for initiating jogging after ACL reconstruction. Methods: Isokinetic quadriceps strength at 60�/s was measured and a jogging trial was completed 3 months after ACL reconstruction with hamstring tendon autograft in 83 patients (36 male, 47 female; mean age, 26.6 ± 12.4 years). Based on the jogging trial results, patients were assigned to either a successful jogging group (mean velocity ≥ 9 km/h) or an unsuccessful jogging group (mean velocity < 9 km/h). The association between QS/BW and successful jogging after surgery was investigated by multivariate logistic regression analysis and the cut-off value was determined by receiver operating characteristic analysis. Results: Forty-four patients (53.0%) were assigned to the successful jogging group and 39 (47.0%) to the unsuccessful jogging group. QS/BW was independently associated with initiating jogging 3 months after surgery. The cut-off value of QS/BW for successful jogging was 1.45 Nm/kg (area under the curve = 0.94; sensitivity = 88.6%, specificity = 87.2%). All of the patients who initiated jogging with QS/BW of > 1.45 Nm/kg at 3 months returned to sports without recurrence or contralateral injury by 10 months after surgery. Conclusions: QS/BW is a significant indicator for safely initiating jogging 3 months after ACL reconstruction. The cut-off value of QS/BW for initiating jogging was 1.45 Nm/kg.

An adequate soft tissue balance is important in total hip arthroplasty (THA). This study assessed the contribution of the iliofemoral ligament, ischiofemoral ligament, and conjoined tendon to the range of hip rotation after THA and hip stability in response to axial traction. THA was performed in eight fresh-frozen cadaveric specimens via an anterolateral approach using a navigation system. The ischiofemoral ligament, the medial arm of the iliofemoral ligament, and the conjoined tendon were resected in that order. The ranges of external and internal rotation and the amount of movement of the femoral head in response to axial traction were measured with the hip in 10° of extension, the neutral position, and in 10°, 30°, and 60° of flexion. Resection of the medial arm of the iliofemoral ligament significantly increased the range of external rotation in 10° of extension, the neutral position, and in 10°, 30°, and 60° of flexion. The conjoined tendon was the most important inhibitor of internal rotation from 10° of extension to 30° of flexion. Although each single element had a minor role in stabilizing the hip when axial traction was applied, resection of two or more elements significantly affected joint stability. The iliofemoral ligament and conjoined tendon are the main inhibitors of external rotation and internal rotation respectively when THA is performed using an anterior or anterolateral approach. Resection of two or more elements could greatly affect hip stability when axial traction is applied.

The Rotational osteotomy for femoral retroversion has been extremely rare despite the known association between femoral neck retroversion, hip pain, and osteoarthritis. Here, we describe a case of femoral neck retroversion for which proximal femoral rotation osteotomy. A 16-year-old boy with a past history of developmental dysplasia of the both hip treated conservatively presented with a complaint of pain in left hips. On physical examination, flexion of the left hip was limited to 90° with terminal pain. Internal rotation was also limited to 10°. Computed tomography (CT) showed -7.1° anteversion of the left femur. We performed rotational osteotomy to increase femoral anteversion because conservative treatment was not effective. The postoperative course was uneventful. At 12 postoperative months, his left hip pain was completely disappeared and femoral anteversion was 34° on CT scans. Retroversion of the femur is a distinct dynamic factor that should be considered in the evaluation of mechanical causes of hip pain. Restoring the normal rotational alignment of the hip resulted in cure of the impingement due to femoral retroversion.

The aim of this cadaveric study was to evaluate the intraoperative kinematics of the native knee including two-dimensional translation of the femur using a navigation system. Eight native knees of 4 fresh-frozen whole-body cadavers were used for the study. The kinematics of each knee were analyzed intraoperatively using the navigation system. Although anterior-posterior translation could not be assessed directly, it could be calculated using a formula derived from the parameters in the navigation system. The native knee showed external rotation of the femur in early knee flexion, transient internal rotation in mid flexion, and gradual external rotation in late flexion. There was no marked change in the coronal rotation angle of the mechanical axis during knee flexion. The femoral center moved anteriorly in early knee flexion and posteriorly in late flexion. The distance moved in the medial-lateral direction was relatively smaller than that in the anterior-posterior direction. Two-dimensional translation of the surgical epicondylar axis showed a medial pivot-like motion. In this cadaveric study, the kinematics of the native knee, including two-dimensional translation of the femur, could be satisfactorily assessed intraoperatively using a navigation system. The intraoperative kinematics of the knee can be analyzed in more detail using this methodology.

Purpose: Developmental dysplasia of the hip (DDH) presents a considerable surgical challenge in total hip arthroplasty (THA). Although the usefulness of computed tomography (CT)-based navigation in cup alignment has been reported, few reports have evaluated three-dimensional (3-D) cup positioning against the acetabulum specifically in patients with DDH. The purpose of this study was to evaluate the efficacy of a CT-based navigation system for alignment and spatial positioning of the cup in THA for patients with DDH. Methods: We reviewed 174 DDH THA cases in which CT-based navigation was used, and 75 cases in which a mechanical guide was used as a control group. Postoperative cup alignment and spatial positioning were evaluated by superimposition of a 3-D cup template onto the actual implanted cup using postoperative CT images, with pelvic coordinates matching the preoperative planning. Results: The proportion within the combined target zone (inclination and anteversion) was 97.7% in the navigation group and 61.3% in the non-navigation group. The mean absolute error between the intraoperative record and the postoperative measurement was 1.5° ± 1.3° for inclination and 2.1° ± 1.8° for anteversion in the navigation group. For acetabular cup positioning, the mean discrepancy between the preoperative planning and the postoperative measurements was 1.9+1.6 mm on the transverse axis, 2.8 ± 2.3 mm on the longitudinal axis, and 1.7 ± 1.3 mm on the sagittal axis. Conclusion: THA using a CT-based navigation system achieved quite high accuracy of cup alignment angles and spatial cup positioning in primary THA for patients with DDH.

Aims Femoroacetabular impingement (FAI) has been highlighted and well documented primarily in Western countries and there are few large studies focused on FAI‐related morphological assessment in Asian patients. We chose to investigate this subject. Patients and Methods We assessed the morphology of the hip and the prevalence of radiographic FAI in Japanese patients by measuring predictors of FAI. We reviewed a total of 1178 hips in 695 men and 483 women with a mean age of 58.2 years (20 to 89) using CT images that had been obtained for reasons unrelated to symptoms from the hip. We measured the lateral centre edge angle, acetabular index, cross‐over sign, alpha angle, and anterior femoral head‐neck offset ratio. Results A total of 441 hips (37.4%) had pincer‐type deformity (41.7% men, 31.3% women) and 534 (45.3%) had cam‐type deformity (54.4% men, 32.3% women). Moreover, 773 hips (65.6%) had at least one parameter that predisposes to FAI (74.0% men, 53.6% women) and 424 hips (36.0%) had two or more parameters (43.6% men, 25.0% women). Conclusion The prevalence of radiographic FAI was common in Japanese patients who are generally considered to have dysplastic hips.