Search

In this study, a SiO2 layer containing YF3:Yb3+/Er3+ phosphors was deposited within matrix-grooves on the back side of silicon solar cells to enable the up-conversion (UC) of near-infrared (NIR) wavelengths with the aim of enhancing energy conversion efficiency. The chemical and optical characteristics of the UC layer were identified using energy-dispersive X-ray spectroscopy and photoluminescence measurements. We also characterized the electrical and optical performance of cells featuring a SiO2 layer with and without NIR-UC phosphors particles of various concentrations in terms of external quantum efficiency and photovoltaic current voltage. Efficiency was shown to increase with an increase in the concentration of NIR-UC phosphors. The efficiency of the cell with a SiO2 layer that included 30 wt% YF3:Yb3+/Er3+ phosphors exceeded the efficiency of a bare solar cell by 13.26%.

In this work, the efficiency of silicon solar cell enhanced by a spectral conversion layer comprising of two-species luminescent down-shifting (LDS) phosphors using spin coating process was demonstrated. Two species of LDS phosphors using co-mixed in silicate solution and single coating, or two species of LDS phosphors separately mixing in silicate solution and double coating, on the silicon solar cells were proposed. The efficiency enhancements of 25.83% (from 11.15% to 14.03%) for the cell with the separate mixing and double coating and 14.0% (from 11.14% to 12.70%) for the cell with co-mixing and one coating were obtained, compared to the reference silicon solar cells.

In this study, we characterized the performance enhancement of heterojunction silicon solar cells using a luminescent down-shifting phosphor layer of the Eu-doped phosphor at various concentrations (2.5, 5, 7.5 wt%) and at 550 nm emission-wavelength.

In this study, various dimeters of luminescent shifting phosphor particles deposited on a thin-film solar cell with a TiO2 anti-reflection layer were characterized in term of optical reflectance, external quantum efficiency and photovoltaic current density-voltage.

We fabricated high speed InAlAs avalanche photodiode without guard ring. It demonstrated the dark current of 1.9 nA and capacitance of 0.16 pF at 0.9 Vbr, and f3-dB of 10 GHz under different incident optical-powers.

In this study, photovoltaic performance enhanced in near-infrared band backward scattering using indium-tin-oxide nanoparticles and up conversion using Yb/Er-doped phosphors particles on the back side of thin silicon solar cells were measured and compared.

DC and AC performance of InAlAs/InGaAs avalanche photodiodes in term of dark-current, capacitance, multiplication-gain and 3-dB frequency (f 3-dB ) were demonstrated. The f 3-dB of 10-18 GHz was achieved using various dimensions of mesa active area.

High-speed mesa-structure avalanche photodiodes with dual-InGaAs absorption-layer and InAlAs multiplication-layer were fabricated and characterized. The 3-dB frequency of 17.7 GHz and gain-bandwidth product of 105 GHz were obtained using a mesa diameter of 30 micrometers.

In this study, by measuring optical reflectance, external quantum efficiency and photovoltaic current-voltage under AM 1.5G solar simulation, the electrical and optical performance of InP/InGaAs solar cells with different thicknesses of ITO antireflective-coating were characterized.

This study reports the use of spectral modulation to solve photocurrent mismatch between sub-cells of triple-junction GaAs solar cell as well as to increase conversion efficiency by using a specific thickness of single antireflection TiO2-layer.

The increased in external quantum efficiency (EQE) and conversion efficiency (η) of silicon solar cells coating multiple up-conversion (UC)-layer on back-side grooved-surface was demonstrated. The EQE- and η-enhancement was 8.4% and 4.7%, due to UC.

In this study, we investigated the electrical and optical performance of single-junction GaAs solar cells coated with an antireflective layer of indium tin oxide (ITO) via thermal sputtering deposition followed by a layer of SiO2 doped with 3 wt% europium-doped (Eu-doped) silicate phosphors via spin-on film technique. The chemical composition of the Eu-doped silicate phosphors was analyzed using energy-dispersive X-ray spectroscopy and the luminescent downshifting (LDS) characteristics were examined in terms of photoluminescence, optical reflectance, and external quantum efficiency (EQE) response. Reverse saturation-current and ideality factor were used to evaluate the passivation performance of ITO films thermal sputtered on GaAs solar cells. The antireflective performance of the ITO film and the LDS effects of the Eu-doped silicate phosphor coatings were respectively evaluated in terms of optical reflectance and EQE response. The enhancement of photovoltaic performance due to LDS effects was confirmed by photovoltaic current density–voltage characteristics of cells under one-sun air mass 1.5G solar simulations. The efficiency enhancement of the cell with only an ITO/SiO2 antireflective layer was 18.39%, whereas the cells coated a SiO2 layer that included various species of Eu-doped phosphors (species-A, species-B, or species-C) on ITO achieved efficiency enhancements of 19.83%, 20.29%, and 21.07%, respectively.

This paper reports on efforts to improve the photovoltaic performance of crystalline silicon solar cells by combining the plasmonic scattering of silver nanoparticles (Ag NPs) with the luminescent downshifting (LDS) effects of Eu-doped phosphors. The surface morphology was examined using a scanning electron microscope in conjunction with ImageJ software. Raman scattering and absorbance measurements were used to examine the surface plasmon resonance of Ag NPs of various dimensions in various dielectric environments. The fluorescence emission of the Eu-doped phosphors was characterized via photoluminescence measurements at room temperature. We examined the combination of plasmonic and LDS effects by measuring the optical reflectance and external quantum efficiency. Improvements in the photovoltaic performance of the solar cells were determined by photovoltaic current density-voltage under AM 1.5G illumination. A combination of plasmonic and LDS effects led to an impressive 26.17% improvement in efficiency, whereas plasmonic effects resulted in a 22.63% improvement compared to the cell with a SiO2 ARC of 17.33%.

This study employed a two-step multi-cycle spin-coating method for the application of MAPbBr3 perovskite nanophosphors on textured silicon solar cells with the aim of enhancing photovoltaic performance through luminescent down-shifting (LDS). The surface morphology and dimensions of the MAPbBr3 perovskite nanophosphors were examined using scanning electron microscopy in conjunction with ImageJ software. The LDS effects of the nanophosphors were revealed by measuring photo-luminance, optical reflectance, and external quantum efficiency. The photovoltaic performance of cells with and without MAPbBr3 perovskite nanophosphors was evaluated according to photovoltaic current density-voltage (J–V) under AM 1.5 G solar illumination. Compared to uncoated cells, two-layer and one-layer coatings of MAPbBr3 perovskite nanophosphors were shown to enhance conversion efficiency by 4.56% and 3.38%, respectively.

In this paper, we experimentally demonstrate the performance of plasmonic silicon (Si) solar cells fabricated using silver (Ag), indium (In), and aluminum (Al) nanoparticles (NPs) of specific dimensions. The nanoparticles were produced using an anodic aluminum oxide (AAO) template as a deposition mask. AAO masks with a thickness of 700 nm and pore diameter of 100–110 nm were fabricated using a single-step anodization and pore widening process aimed at controlling the dimensions and coverage of the metallic NPs with a high degree of precision. Our ultimate objective was to facilitate a comparison of plasmonic effects induced by the various metallic NPs in Si solar cells. Scanning electron microscopy was used to examine the thickness, pore dimensions, and pore size distribution of the AAO template as well as the dimensions and coverage of the deposited metallic NPs. Measurements of optical reflectance and external quantum efficiency were used to characterize the plasmonic effects of the various metallic NPs. Measurements of photovoltaic current density-voltage under AM 1.5G simulation were used to confirm the enhancements in performance resulting from the plasmonic effects induced by the metallic NPs. Ag NPs increased the short-circuit current density (Δ J sc ) of the Si solar cells by 10.58% (from 29.49 to 32.61 mA/cm 2 ), In NPs increased Δ J sc by 7.81% (from 29.31 to 31.60 mA/cm 2 ), and Al NPs increased Δ J sc by 3.27% (from 28.73 to 29.67 mA/cm 2 ). When using metallic nanoparticles (average size of 106 nm and average coverage of 32.67%), the plasmonic effects in cells with Ag NPs exceeded the effects observed in cells fabricated using In-NPs or Al-NPs.

This paper experimentally demonstrates the benefits of combining an up-conversion (UC) layer containing Yb/Er-doped yttrium oxide-based phosphors with a plasmonic scattering layer containing indium nanoparticles (In-NPs) in enhancing the photovoltaic performance of textured silicon solar cells. The optical emissions of the Yb/Er-doped phosphors were characterized using photoluminescence measurements obtained at room temperature. Optical microscope images and photo current-voltage curves were used to characterize the UC emissions of Yb/Er-doped phosphors under illumination from a laser diode with a wavelength of 1550 nm. The plasmonic effects of In NPs were assessed in terms of absorbance and Raman scattering. The performance of the textured solar cells was evaluated in terms of optical reflectance, external quantum efficiency, and photovoltaic performance. The analysis was performed on cells with and without a UC layer containing Yb/Er-doped yttrium oxide-based phosphors of various concentrations. The analysis was also performed on cells with a UC layer in conjunction with a plasmonic scattering layer. The absolute conversion efficiency of the textured silicon solar cell with a combination of up-conversion and plasmonic-scattering layers (15.43%) exceeded that of the cell with an up-conversion layer only (14.94%) and that of the reference cell (14.45%).

In this study, we sought to enhance the photovoltaic performance of silicon solar cells by coating them (via the spin-on film technique) with a layer of SiO2 containing plasmonic indium-tin-oxide nanoparticles (ITO-NPs) of various concentrations. We demonstrated that the surface plasmon resonance absorption, surface morphology, and transmittance of the ITO-NPs dispersed in SiO2 layer at various concentrations (1&ndash, 7 wt%). We also assessed the plasmonic scattering effects of ITO-NPs within a layer of SiO2 with and without a sub-layer of ITO in terms of optical reflectance, external quantum efficiency, and photovoltaic current-voltage under air mass (AM) 1.5G solar simulation. Compared to an uncoated reference silicon solar cell, applying a layer of SiO2 containing 3 wt% ITO-NPs improved efficiency by 17.90%, whereas applying the same layer over a sub-layer of ITO improved efficiency by 33.27%, due to the combined effects of anti-reflection and plasmonic scattering.

This paper demonstrates the fabrication of plasmonic silicon (Si) solar cells with a matrix comprising a pattern of silver nanoparticles (Ag-NPs) surrounded by indium nanoparticles (In-NPs). We examined the plasmonic-modulated light scattering induced by Ag-NPs/In-NPs matrices with various degrees of coverage using optical as well as electrical measurements. The Raman scattering of In-NPs and Ag-NPs was characterized using a semiconductor laser at a wavelength of 532 nm and output power of 0.36 W. We also measured the optical reflectance and external quantum efficiency response of various solar cells. We achieved impressive results with regard to plasmonic-modulated light scattering through the implementation of a matrix that included Ag-NP coverage of 20% and In-NP coverage of 80% over an area of 4 × 4 mm 2 . This resulted in a 9.93% increase in short-circuit current density (from 31.91 mA/cm 2 to 35.08 mA/cm 2 ) and a 10.12% increase in conversion efficiency (from 13.04% to 14.36%), compared to cells with uniformly distributed Ag-NPs.

In this study, the substantial performance enhancement of crystalline silicon (C-Si) solar cells through the combined utilization of two luminescent down-shifting europium (Eu)-doped phosphor species in the silicate (SiO 2 ) layer was experimentally demonstrated. The combination of emission wavelengths of 512 nm and 550 nm, of 512 nm and 610 nm, and of 550 nm and 610 nm from the two Eu-doped phosphor species, respectively, was proposed to achieve a broad band luminescent emission as well as a higher conversion efficiency. The surface morphologies and optical properties of the 3-wt.% Eu-doped phosphor species mixed with SiO 2 solution coated on C-Si solar cells via a spin-on film technique were characterized by scanning electron microscopy, photoluminescence, optical reflectance, external quantum efficiency, and photovoltaic current density–voltage measurements under one sun AM 1.5G illumination. The short-circuit current density enhancement (ΔJ sc ) of the Si solar cells with Eu-doped phosphor particles on a SiO 2 layer was 4–9% higher than that of cells with only a SiO 2 layer. A ΔJ sc of 19.85% and a conversion efficiency enhancement of 15.97% for the cells with the combination of two Eu-doped phosphor species with emission wavelengths of 512 nm and 610 nm were obtained due to broad band luminescent emission and forward light scattering.

In this study, the high conversion efficiency of textured silicon solar cells based on an ITO/TiO2/Si metal–oxide–semiconductor (MOS) structure and biasing effects was experimentally demonstrated. An impressive conversion efficiency of >20% was obtained through an increase in the absorption volume and through the efficient collection of the generated photo-carriers when the biasing voltage was applied on the ITO-transparent electrode. The optical reflectance, dark current–voltage (I–V), external quantum efficiency (EQE) and photovoltaic current density–voltage (J–V) under one-sun AM 1.5G illumination of the MOS structure solar cells without voltage biasing were characterized firstly. Then the photovoltaic J–V curves of the MOS structure solar cells with biasing voltages from 0 to 3 V were measured and compared. Significant increases in short-circuit current and conversion efficiency were observed when the biasing voltage was increased from 0 to 3 V using an external voltage power supply. In addition, the integration of a photovoltaic biasing source using a series of connected p–n junction solar cells (instead of an external voltage power supply) with a MOS structure solar cell on a ceramic platform to enhance the MOS structure solar cell efficiency was demonstrated for the first time in textured silicon solar cells.

This paper reports impressive enhancements in the efficiency of crystalline silicon solar cells through the application of a Eu-doped silicate phosphor luminescent downshifting (LDS) layer controlled by spin-on film technique. Surface morphology was examined using scanning electron microscope (SEM), chemical composition was analyzed using energy dispersive spectroscopy (EDS), and fluorescence emission was characterized using photoluminescence (PL) measurements at room temperature. The optical reflectance, absorbance, and external quantum efficiency (EQE) response of SiO 2 -coated cells with and without Eu-doped silicate phosphor were measured and compared. An 18.77% improvement in efficiency was achieved, as determined by photovoltaic current–voltage measurement under one-sun AM 1.5 G illuminations.

This study experimentally demonstrated enhanced fluorescence emissions from luminescent down-shifting (LDS) Eu-doped phosphors under the effects of localized surface plasmon resonance (LPSR) from silver nanoparticles (Ag NPs). The plasmonic effects of the Ag NPs was examined in terms of plasmon-enhanced Raman scattering and plasmonic absorption. The fluorescence emission of the Eu-doped phosphors was examined in terms of photoluminescence (PL). Overlap between the plasmonic absorption band of Ag NPs and the PL emission band of Eu-doped phosphors increased fluorescence emissions by enhancing excitation. This study also developed an optical process model describing LSPR (Ag NPs), LDS (Eu-doped phosphors), and plasmon-enhanced fluorescence (PEF; Eu-doped phosphors with Ag NPs) on silicon solar cells. PEF was experimentally confirmed in terms of PL, external quantum efficiency (EQE), and photovoltaic current–voltage measurements. Compared to the cell with only an anti-reflection layer of SiO2/SOG, the inclusion of Ag NPs with the Eu-doped phosphors enhanced the PL emission intensity by 1.1243 times at a wavelength of 514 nm and also improved the EQE response by 8.3% (from 57.28% to 62.05%) and conversion efficiency by 7.1% (from 12.04% to 12.89%).

This study experimentally examined the plasmonic near-field and far-field effects of two-dimensional (2-D) indium-nanoparticles (In-NPs) embedded within an anti-reflective SiO2 layer on the optical and electrical characteristics of silicon solar cells. The dimensions and profiles of the 2-D In-NPs were derived from scanning electron microscope images (top-view and side-view) using Image-J software. The surface plasmon resonance of the 2-D In-NPs was estimated from Raman scattering and absorbance measurements. Measurements of optical reflectance and external quantum efficiency revealed that near-field and far-field plasmonic effects depended on the thickness of the spacer and capping layers. The influence of these phenomena on photovoltaic performance was confirmed in terms of photovoltaic current density-voltage under AM 1.5 G illumination. The application of a 90-nm thick SiO2 anti-reflective layer was shown to enhance conversion efficiency by 23.85% (compared to the bare reference cell), and the inclusion of In-NPs between an 18-nm thick spacer layer and 72-nm thick capping layer extended this improvement to 34.16%.

In this study, we sought to enhance the output power and conversion efficiency of textured silicon solar cells by layering two-dimensional indium nanoparticles (In NPs) within a double-layer (SiNx/SiO2) antireflective coating (ARC) to induce plasmonic forward scattering. The plasmonic effects were characterized using Raman scattering, absorbance spectra, optical reflectance, and external quantum efficiency. We compared the optical and electrical performance of cells with and without single layers and double layers of In NPs. The conversion efficiency of the cell with a double layer of In NPs (16.97%) was higher than that of the cell with a single layer of In NPs (16.61%) and greatly exceeded that of the cell without In NPs (16.16%). We also conducted a comprehensive study on the light-trapping performance of the textured silicon solar cells with and without layers of In NPs within the double layer of ARC at angles from 0&deg, to 75&deg, The total electrical output power of cells under air mass (AM) 1.5 G illumination was calculated. The application of a double layer of In NPs enabled an impressive 53.42% improvement in electrical output power (compared to the cell without NPs) thanks to the effects of plasmonic forward scattering.

This paper presents a high-speed top-illuminated InP-based avalanche photodetector (APD) fabricated on conductive InP-wafer using planar processes. The proposed device was then evaluated in terms of DC and dynamic performance characteristics. The design is based on a separate absorption, grading, charge, and multiplication (SAGCM) epitaxial-structure. An electric field-profile of the SAGCM layers was derived from the epitaxial structure. The punch-through voltage of the SAGCM APD was controlled to within 16&ndash, 17 V, whereas the breakdown voltage (VBR) was controlled to within 28&ndash, 29 V. We obtained dark current of 2.99 nA, capacitance of 0.226 pF, and multiplication gain of 12, when the APD was biased at 0.9 VBR at room temperature. The frequency-response was characterized by comparing the calculated 3-dB cut-off modulation-frequency (f3-dB) and f3-dB values measured under various multiplication gains and modulated incident powers. The time-response of the APD was evaluated by deriving eye-diagrams at 0.9 VBR using pseudorandom non-return to zero codes with a length of 231-1 at 10&ndash, 12.5 Gbps. There was a notable absence of intersymbol-interference, and the signals remained error-free at data-rates of up to 12.5 Gbps. The correlation between the rise-time and modulated-bandwidth demonstrate the suitability of the proposed SAGCM-APD chip for applications involving an optical-receiver at data-rates of &gt, 10 Gbps.

In this study, photovoltaic performance enhancements of single-junction GaAs solar Cells using a spectral conversion layer comprising of various species of luminescent down-shifting (LDS) and up conversion (UC) phosphors deposition by spin-on film method are characterized. The peak luminescent wavelength of proposed species of LDS and UC phosphors was 512 nm and 675 nm, respectively. Optical reflectance and external quantum efficiency responses are used to examine LDS and UC effects on the cells. The photovoltaic performance enhancements are confirmed by photovoltaic current density-voltage measurements under AM 1.5G solar simulation. An impressive efficiency of 23.83% of the cell coated with a spectral conversion layer comprising of both species of LDS and up UC phosphors, which exceeding that 23.72% of cell with species of UC, 23.20% of cell with species of LDS and 19.36 of cell without a spectral conversion layer.

In this work, a planar-type top-illuminated high-responsivity InP-based avalanche photodetector (APD) was fabricated and characterized. The dark current of 0.55 nA, capacitance of 0.237 pF, responsivity of 12.2 A/W were obtained when APD operated at 0.95 breakdown voltage (Vbr). The eye diagrams of the fabricated APD under 0.95 VBR to the pseudorandom NRZ code of length 231-1 at 2.5–10 Gb/s were measured. The absence of significant intersymbol interference and the error free for the signals up to 10 Gb/s can be achieved.

This study demonstrates high-efficiency (23.72%) single-junction GaAs solar cell coated with species of NIR up-conversion phosphors layer on the front-side surface by spin-on-film deposition, compared to 19.36% efficiency of the reference single-junction GaAs solar cell.

Surface properties of a thin-film p-on-n silicon solar cell with a subwavelength nanoporous structure fabricated on an emitter layer by using metal-assisted chemical etching (MACE) were investigated through an experiment and simulation. After 10-s MACE processing, the conversion efficiency increased by 43.09% (from 5.64% to 8.07%) was obtained, compared with a reference solar cell without MACE. The simulation result indicated that the surface recombination velocity was an exponential function of the etching time from 0 to 30 s, and showed close agreement with the experimental data.

In this study, the enhancement of silicon solar cell photovoltaic performance by means of indium nanoparticles (In NPs) deposited on the TiO2 space layer and capped with an Al2O3 antireflective layer is demonstrated. The impressive performance enhancement is attributed to the plasmonic scattering of broadband light which occurs as a result of the Al2O3/In NPs/TiO2 antireflective coating (PARC) surface structure. The optical reflectance, photovoltaic current-voltage (I–V), external quantum efficiency (EQE), and photovoltaic performance as a function of the incident angles are measured and compared. The experimental results show that the reflectance decreases with increasing TiO2 thickness and that the lowest reflection point of the spectrum was red-shifted by the use of a PARC surface structure. EQE was significantly enhanced between 400 and 1050 nm wavelengths and much high EQE of 85% were observed for the cell with In NPs embedded in the 65-nm Al2O3/20 nm TiO2 layer structure. In comparison to a bare reference solar cell, an efficiency enhancement of 54.47% (from 10.96% to 16.93%) and a short-circuit current density enhancement of 52.83% (from 26.10 to 39.89 mA/cm2) were obtained for the cell with a 65-nm Al2O3/In NPs/20-nm TiO2 antireflection structure under normal incident illumination. In addition, for incident angles from 0° to 15°, the 0.78% decrease in conversion efficiency (from 16.71% to 16.58%) of the cell with the PARC surface structure was less than the 3.28% (from 13.86% to 13.49%) decrease of the cell with 65-nm Al2O3/20-nm TiO2 double layer antireflective coating (DL-ARC) due to the plasmonic scattering of broadband light.

This study fabricated a plasmonic silicon solar cell covered with silver (Ag) nanoparticles (NPs) using an ultra-thin anodic aluminum oxide (AAO) template as a deposition mask. An ultra-thin AAO template of approximately 200 nm was produced using a single-step anodization process in which an Al substrate was etched with phosphoric acid (H 3 PO 4 ) for 3 min. We then used scanning electron microscopy (SEM) to examine the thickness and density of the AAO as a function of anodization duration, the results of which were confirmed by optical transmission measurement. The photovoltaic performance of the resulting silicon solar cell with Ag NPs was characterized according to photovoltaic current-voltage and external quantum efficiency. The inclusion of Ag NPs resulted in a 32.92% increase in conversion efficiency, compared with reference solar cells produced without Ag NPs.

This study employed spin-on film (SOF) technology for the fabrication of phosphorus diffusion and multi-layer anti-reflective coatings (ARCs) with a graded index on silicon (Si) wafers. Low cost and high efficiency solar cells are important issues for the operating cost of a photovoltaic system. SOF technology for the fabrication of solar cells can be for the achievement of this goal. This study succeeded in the application of SOF technology in the preparation of both phosphorus diffusion and SiO 2 /graded index TiO 2 ARCs for Si solar cells. Optical properties of TiO 2 , SiO 2 , and multi-layer SiO 2 /TiO 2 deposition by SOF are characterized. Electrical and optical characteristics of the fabricated solar cells are measured and compared. An impressive efficiency of 18.25% was obtained by using the SOF processes.

This study presents the electrical and optical properties of a thin-film p-on-n silicon solar cell with a sub-wavelength nanoporous surface structure etched into the emitter layer using metal-assisted chemical etching (MACE) before being coated with a dielectric passivation layer. The application of MACE etching for more than 5 s significantly enhanced light trapping efficiency. Surface recombination in the roughening emitter layer was suppressed by the application of a TiO 2 passivation film deposited by e-beam evaporation at a low deposition rate in conjunction with substrate rotation. A thin film silicon solar cell that underwent MACE for 10 s with a 15 nm TiO 2 passivation layer produced an impressive 51% improvement in conversion efficiency (from 6.27% to 9.62%), compared to reference solar cells fabricated without MACE processing or dielectric passivation.