Search

We demonstrate compact highly efficient broadband strip-to-slot mode converters in silicon with record-low losses of 0.02 (±0.02) dB and negligible reflections between 1480 nm and 1580 nm. The new strip-to-slot transition is logarithmically tapered, which enables a compact design. The new logarithmic tapers are compared with more conventional linearly tapered converters.

We report on high-speed multilevel signal generation and arbitrary pulse shaping with silicon-organic hybrid (SOH) Mach-Zehnder interferometer (MZI) modulators. Pure phase modulation exploiting the linear electrooptic effect allows the generation of multiple modulations formats at highest speed such as 40-Gbit/s on-off-keying (OOK) and binary-phase-shift keying (BPSK) and 28-Gbd 4-ASK and 8-ASK with data rates up to 84 Gbit/s. Additionally, beside NRZ pulse shaping, for the first time, Nyquist pulse shaping with silicon modulators is demonstrated to enable multiplexing at highest spectral efficiency.

This article is a transcription of an electronic symposium held on February 5, 2001 by the Brazilian Society of Neuroscience and Behavior (SBNeC) during which eight specialists involved in clinical and experimental research on sleep and dreaming exposed their personal experience and theoretical points of view concerning these highly polemic subjects. Unlike most other bodily functions, sleep and dreaming cannot, so far, be defined in terms of definitive functions that play an ascribable role in maintaining the organism as a whole. Such difficulties appear quite clearly all along the discussions. In this symposium, concepts on sleep function range from a protective behavior to an essential function for maturation of the nervous system. Kleitman's hypothesis [Journal of Nervous and Mental Disease (1974), 159: 293-294] was discussed, according to which the basal state is not the wakeful state but sleep, from which we awake to eat, to protect ourselves, to procreate, etc. Dreams, on the other hand, were widely discussed, being considered either as an important step in consolidation of learning or simply the conscious identification of functional patterns derived from the configuration of released or revoked memorized information.

Cryogenic quantum applications have a demand for an ever-higher number of interconnects and bandwidth. Photonic links are foreseen to offer data transfer with high bandwidth, low heat load, and low noise to enable the next-generation scalable quantum computing systems. However, they require high-speed and energy-efficient modulators operating at cryogenic temperatures for electro-optic signal conversion. Here, plasmonic organic electro-optic modulators operating at 4 K are demonstrated with a >100 GHz bandwidth, drive voltages as low as 96 mV, and a significant reduction in plasmonic propagation losses by over 40% compared to room temperature. Up to 160 Gbit/s and 256 Gbit/s cryogenic electro-optic signal conversion are demonstrated by performing data experiments using a plasmonic Mach-Zehnder modulator at around 1528 nm and a plasmonic ring-resonator modulator at around 1285 nm, respectively. This work shows that plasmonic modulators are ideally suited for future high-speed, scalable, and energy-efficient photonic interconnects in cryogenic environments., Competing Interests: The authors declare the following competing financial interest(s): M.D., V.T., N.D.M., C.H., B.B., W.H., and J.L. are involved in activities towards commercializing plasmonic modulators at Polariton Technologies AG. The remaining authors declare no competing interests., (© 2024 The Authors. Published by American Chemical Society.)

Background: Information and communication technologies (ICTs) have become a fundamental part of children's lives and development. However, children need to acquire the skills and knowledge to manage the risks that technology presents., Objectives: This child-centric research on children's online experiences aims to understand the benefits Tunisian children derive from the internet, the risks and harms to which they are exposed, and how aware and resilient Tunisian children are to these online risks and harms., Participants and Setting: 113 children, aged 13-17, participated in focus groups in five governorates across Tunisia., Methods: Qualitative data was collected from 16 focus group discussions then data was analyzed using inductive and deductive thematic coding., Results: The internet offers Tunisian children educational, social, entertainment, and mental health benefits, in addition to personal development and commercial opportunities. Hacking and the use of fake Facebook profiles were highlighted as facilitators of online bullying, sexual harassment, and extortion, all of which disproportionately affected girls. Children demonstrated personal responsibility for their online activity but recognized that children and parents should have greater awareness about the risks the internet poses., Conclusions: The young people included in the study reported that they enjoy numerous benefits from internet access and demonstrate some resilience to online risks and harms. However, there is a need for societal and institutional change, through a combination of awareness raising, targeted support for children and parents, and improving the capacity of key actors to prevent online violence while ensuring an effective response and victim support., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The physical and chemical characteristics of an adsorbent are key factors determining its efficiency in relation to a particular adsorbate molecule. The adsorption of cyanuric acid (cya) on activated carbon (AC) has not been extensively explored in terms of its basic phenomenon and specific surface interactions. Cya is an important molecule in the swimming pool industry, as it protects free chlorine from UV light degradation. A proper characterization of AC will be beneficial for swimming pool product suppliers to determine the criteria while purchasing it to remove excess cya accumulated in pools. A detailed investigation of the physicochemical properties of activated carbon was conducted to assess its potential to adsorb cya from water. The effect of the adsorption capacity under various pH conditions was studied and it was found that acidic pH favors the adsorption process. With the help of temperature-programmed desorption coupled with mass spectrometry (TPD-MS) and X-ray photoelectron spectroscopy (XPS), the surface chemistry was well analyzed for a proper understanding of the adsorbent-adsorbate interaction. While conventional pool test equipment gives inconsistent readings of the cya concentration, a UV-vis spectroscopy-based methodology has been developed to accurately measure traces of cya in water. This method can be helpful to validate the accuracy of pool-testers for research and development purposes. The batch adsorption experiments revealed that cya adsorption on activated carbon follows pseudo-second-order kinetics, which confirms that the adsorption mechanism is chemisorption, which in fact, depends highly on the surface chemistry of the AC and the reaction pH.

This study demonstrates enhancement of in-device electro-optic activity via a series of theory-inspired organic electro-optic (OEO) chromophores based on strong (diarylamino)phenyl electron donating moieties. These chromophores are tuned to minimize trade-offs between molecular hyperpolarizability and optical loss. Hyper-Rayleigh scattering (HRS) measurements demonstrate that these chromophores, herein described as BAH, show >2-fold improvement in β versus standard chromophores such as JRD1, and approach that of the recent BTP and BAY chromophore families. Electric field poled bulk devices of neat and binary BAH chromophores exhibited significantly enhanced EO coefficients ( r 33 ) and poling efficiencies ( r 33 / E p ) compared with state-of-the-art chromophores such as JRD1. The neat BAH13 devices with charge blocking layers produced very large poling efficiencies of 11.6 ± 0.7 nm 2 V -2 and maximum r 33 value of 1100 ± 100 pm V -1 at 1310 nm on hafnium dioxide (HfO 2 ). These results were comparable to that of our recently reported BAY1 but with much lower loss (extinction coefficient, k ), and greatly exceeding that of other previously reported OEO compounds. 3 : 1 BAH-FD : BAH13 blends showed a poling efficiency of 6.7 ± 0.3 nm 2 V -2 and an even greater reduction in k . 1 : 1 BAH-BB : BAH13 showed a higher poling efficiency of 8.4 ± 0.3 nm 2 V -2 , which is approximately a 2.5-fold enhancement in poling efficiency vs. JRD1. Neat BAH13 was evaluated in plasmonic-organic hybrid (POH) Mach-Zehnder modulators with a phase shifter length of 10 μm and slot widths of 80 and 105 nm. In-device BAH13 achieved a maximum r 33 of 208 pm V -1 at 1550 nm, which is ∼1.7 times higher than JRD1 under equivalent conditions.

We present a plasmonic platform featuring efficient, broadband metallic fiber-to-chip couplers that directly interface plasmonic slot waveguides, such as compact and high-speed electro-optic modulators. The metallic gratings exhibit an experimental fiber-to-slot coupling efficiency of -2.7 dB with -1.4 dB in simulations with the same coupling principle. Further, they offer a huge spectral window with a 3 dB passband of 350 nm. The technology relies on a vertically arranged layer stack, metal-insulator-metal waveguides, and fiber-to-slot couplers and is formed in only one lithography step with a minimum feature size of 250 nm. As an application example, we fabricate new modulator devices with an electro-optic organic material in the slot waveguide and reach 50 and 100 Gbit/s data modulation in the O- and C-bands within the same device. The devices' broad spectral bandwidth and their relaxed fabrication may render them suitable for experiments and applications in the scope of sensing, nonlinear optics, or telecommunications.

100 Gb/s NRZ-OOK transmission over 14 km standard single mode fiber in the C-band is demonstrated with a simple intensity modulation and direct detection scheme. The transmission concept utilizes single sideband modulation and comprises a single differential digital-to-analog converter with adjustable phase offset, a new dual electrode plasmonic Mach-Zehnder modulator, a laser at 1537.5 nm, standard single mode fibers, a photodiode, an analog-to-digital converter, and linear offline digital signal processing. The presented SSB concept requires no DSP and complex signaling at the transmitter. The demonstrated SSB transmitter increased the possible transmission distance by a factor of 4.6 compared to a DSB transmitter. We also investigated the equalization requirements. A T/2-spaced feedforward equalizer requires 27 taps to achieve transmission over 10 km with a BER below the HD-FEC limit. In comparison to a DSB transmitter, the SSB transmitter reduced the receiver DSP complexity by a factor of 13.7.

Terahertz sources and detectors have enabled numerous new applications from medical to communications. Yet, most efficient terahertz detection schemes rely on complex free-space optics and typically require high-power lasers as local oscillators. Here, we demonstrate a fiber-coupled, monolithic plasmonic terahertz field detector on a silicon-photonics platform featuring a detection bandwidth of 2.5 THz with a 65 dB dynamical range. The terahertz wave is measured through its nonlinear mixing with an optical probe pulse with an average power of only 63 nW. The high efficiency of the scheme relies on the extreme confinement of the terahertz field to a small volume of 10 -8 (λ THz /2) 3 . Additionally, on-chip guided plasmonic probe beams sample the terahertz signal efficiently in this volume. The approach results in an extremely short interaction length of only 5 μm, which eliminates the need for phase matching and shows the highest conversion efficiency per unit length up to date.

A new plasmonic Mach-Zehnder modulator is demonstrated at a bit rate of 120 Gb/s NRZ-OOK with low peak-to-peak driving voltages of 178 mV pp below the HD-FEC limit. Such record low driving voltage requirements potentially translate into an electrical drive power consumption of 862 aJ/bit. The low drive voltages have been made possible by a new differential Mach-Zehnder modulator electrode design. The differential electrode design is optimized for the balanced driving circuitry and reduces the effectively required driving voltage by a factor of four (V π /4). The potential of the transmitter scheme is further demonstrated by a transmission experiment over 500 m of single mode fiber at the C-band with a BER performance below the KP4 FEC limit.

Coherent optical communications provides the largest data transmission capacity with the highest spectral efficiency and therefore has a remarkable potential to satisfy today's ever-growing bandwidth demands. It relies on so-called in-phase/quadrature (IQ) electro-optic modulators that encode information on both the amplitude and the phase of light. Ideally, such IQ modulators should offer energy-efficient operation and a most compact footprint, which would allow high-density integration and high spatial parallelism. Here, we present compact IQ modulators with an active section occupying a footprint of 4 × 25 µm × 3 µm, fabricated on the silicon platform and operated with sub-1-V driving electronics. The devices exhibit low electrical energy consumptions of only 0.07 fJ bit -1 at 50 Gbit s -1 , 0.3 fJ bit -1 at 200 Gbit s -1 , and 2 fJ bit -1 at 400 Gbit s -1 . Such IQ modulators may pave the way for application of IQ modulators in long-haul and short-haul communications alike.

The electro-optical Pockels effect is an essential nonlinear effect used in many applications. The ultrafast modulation of the refractive index is, for example, crucial to optical modulators in photonic circuits. Silicon has emerged as a platform for integrating such compact circuits, but a strong Pockels effect is not available on silicon platforms. Here, we demonstrate a large electro-optical response in silicon photonic devices using barium titanate. We verify the Pockels effect to be the physical origin of the response, with r 42  = 923 pm V -1 , by confirming key signatures of the Pockels effect in ferroelectrics: the electro-optic response exhibits a crystalline anisotropy, remains strong at high frequencies, and shows hysteresis on changing the electric field. We prove that the Pockels effect remains strong even in nanoscale devices, and show as a practical example data modulation up to 50 Gbit s -1 . We foresee that our work will enable novel device concepts with an application area largely extending beyond communication technologies.

To cope with the high bandwidth requirements of wireless applications1, carrier frequencies are shifting towards the millimetre-wave and terahertz bands2-5. Conversely, data is normally transported to remote wireless antennas by optical fibres. Therefore, full transparency and flexibility to switch between optical and wireless domains would be desirable6,7. Here, we demonstrate for the first time a direct wireless-to-optical receiver in a transparent optical link. We successfully transmit 20 and 10 Gbit/s over wireless distances of 1 and 5 m at a carrier frequency of 60 GHz, respectively. Key to the breakthrough was a plasmonic mixer directly mapping the wireless information onto optical signals. The plasmonic scheme with its subwavelength feature and pronounced field confinement provides a built-in field enhancement of up to 90'000 over the incident field in an ultra-compact and CMOS compatible structure. The plasmonic mixer is not limited by electronic speed and thus compatible with future terahertz technologies., Competing Interests: Competing interests The authors declare no competing interest.

Deep-UV (DUV) laser patterning has been widely used in recent years for micro- and nanopatterning, taking advantage of the specific properties of irradiation with high-energy photons. In this paper, we show the usefulness of DUV laser patterning for preparing surfaces with controlled chemical properties at the micro- and nanoscale. Our motivation was to develop a simple and versatile method for chemical patterning at multiscales (from mm to nm) over relatively wide areas (mm 2 to cm 2 ). The chemical properties were provided by self-assembled monolayers (SAMs), prepared on glass or silicon wafers. We first investigated their modification under our irradiation conditions (ArF laser) using AFM, XPS and contact angle measurements. Photopatterning was then demonstrated with minimum feature sizes as small as 75 nm, and we showed the possibility to regraft a second SAM on the irradiated regions. Finally, we used these chemically patterned surfaces for directed self-assembly of several types of objects, such as block copolymers, sol-gel materials and liquids by vapor condensation.

For nearly two decades, researchers in the field of plasmonics 1 -which studies the coupling of electromagnetic waves to the motion of free electrons near the surface of a metal 2 -have sought to realize subwavelength optical devices for information technology 3-6 , sensing 7,8 , nonlinear optics 9,10 , optical nanotweezers 11 and biomedical applications 12 . However, the electron motion generates heat through ohmic losses. Although this heat is desirable for some applications such as photo-thermal therapy, it is a disadvantage in plasmonic devices for sensing and information technology 13 and has led to a widespread view that plasmonics is too lossy to be practical. Here we demonstrate that the ohmic losses can be bypassed by using 'resonant switching'. In the proposed approach, light is coupled to the lossy surface plasmon polaritons only in the device's off state (in resonance) in which attenuation is desired, to ensure large extinction ratios between the on and off states and allow subpicosecond switching. In the on state (out of resonance), destructive interference prevents the light from coupling to the lossy plasmonic section of a device. To validate the approach, we fabricated a plasmonic electro-optic ring modulator. The experiments confirm that low on-chip optical losses, operation at over 100 gigahertz, good energy efficiency, low thermal drift and a compact footprint can be combined in a single device. Our result illustrates that plasmonics has the potential to enable fast, compact on-chip sensing and communications technologies.

Plasmonics provides a possible route to overcome both the speed limitations of electronics and the critical dimensions of photonics. We present an all-plasmonic 116-gigabits per second electro-optical modulator in which all the elements-the vertical grating couplers, splitters, polarization rotators, and active section with phase shifters-are included in a single metal layer. The device can be realized on any smooth substrate surface and operates with low energy consumption. Our results show that plasmonics is indeed a viable path to an ultracompact, highest-speed, and low-cost technology that might find many applications in a wide range of fields of sensing and communications because it is compatible with and can be placed on a wide variety of materials., (Copyright © 2017 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.)

The performance of highly nonlinear organic electro-optic (EO) materials incorporated into nanoscale slots is examined. It is shown that EO coefficients as large as 190 pm/V can be obtained in 150 nm wide plasmonic slot waveguides but that the coefficients decrease for narrower slots. Possible mechanism that lead to such a decrease are discussed. Monte-Carlo computer simulations are performed, confirming that chromophore-surface interactions are one important factor influencing the EO coefficient in narrow plasmonic slots. These highly nonlinear materials are of particular interest for applications in optical modulators. However, in modulators the key parameters are the voltage-length product U π L and the insertion loss rather than the linear EO coefficients. We show record-low voltage-length products of 70 Vµm and 50 Vµm for slot widths in the order of 50 nm for the materials JRD1 and DLD164, respectively. This is because the nonlinear interaction is enhanced in narrow slot and thereby compensates for the reduced EO coefficient. Likewise, it is found that lowest insertion losses are observed for slot widths in the range 60 to 100 nm.

We demonstrate a plasmonic Mach-Zehnder (MZ) modulator with a flat frequency response exceeding 170 GHz. The modulator comprises two phase modulators exploiting the Pockels effect of an organic electro-optic material in plasmonic slot waveguides. We further show modulation at 100 GBd NRZ and 60 GBd PAM-4. The electrical drive signals were generated using a 100 GSa/s digital to analog converter (DAC). The high-speed and small-scale devices are relevant for next-generation optical interconnects.

In this paper, we demonstrate an integrated microwave phoneeded for beamtonics phased array antenna feeder at 60 GHz with a record-low footprint. Our design is based on ultra-compact plasmonic phase modulators (active area <2.5µm 2 ) that not only provide small size but also ultra-fast tuning speed. In our design, the integrated circuit footprint is in fact only limited by the contact pads of the electrodes and by the optical feeding waveguides. Using the high speed of the plasmonic modulators, we demonstrate beam steering with less than 1 ns reconfiguration time, i.e. the beam direction is reconfigured in-between 1 GBd transmitted symbols.

We demonstrate for the first time a waveguide-based frequency shifter on the silicon photonic platform using single-sideband modulation. The device is based on silicon-organic hybrid (SOH) electro-optic modulators, which combine conventional silicon-on-insulator waveguides with highly efficient electro-optic cladding materials. Using small-signal modulation, we demonstrate frequency shifts of up to 10 GHz. We further show large-signal modulation with optimized waveforms, enabling a conversion efficiency of -5.8 dB while suppressing spurious side-modes by more than 23 dB. In contrast to conventional acousto-optic frequency shifters, our devices lend themselves to large-scale integration on silicon substrates, while enabling frequency shifts that are several orders of magnitude larger than those demonstrated with all-silicon serrodyne devices.

A scheme for the direct conversion of millimeter and THz waves to optical signals is introduced. The compact device consists of a plasmonic phase modulator that is seamlessly cointegrated with an antenna. Neither high-speed electronics nor electronic amplification is required to drive the modulator. A built-in enhancement of the electric field by a factor of 35,000 enables the direct conversion of millimeter-wave signals to the optical domain. This high enhancement is obtained via a resonant antenna that is directly coupled to an optical field by means of a plasmonic modulator. The suggested concept provides a simple and cost-efficient alternative solution to conventional schemes where millimeter-wave signals are first converted to the electrical domain before being up-converted to the optical domain.

Plasmonic modulators might pave the way for a new generation of compact low-power high-speed optoelectronic devices. We introduce an extremely compact transmitter based on plasmonic Mach-Zehnder modulators offering a capacity of 4 × 36 Gbit/s on a footprint that is only limited by the size of the high-speed contact pads. The transmitter array is contacted through a multicore fiber with a channel spacing of 50 μm.

We report on high-speed plasmonic-organic hybrid Mach-Zehnder modulators comprising ultra-compact phase shifters with lengths as small as 19 µm. Choosing an optimum phase shifter length of 29 µm, we demonstrate 40 Gbit/s on-off keying (OOK) modulation with direct detection and a BER < 6 × 10(-4). Furthermore, we report on a 29 µm long binary-phase shift keying (BPSK) modulator and show that it operates error-free (BER < 1 × 10(-10)) at data rates up to 40 Gbit/s and with an energy consumption of 70 fJ/bit.

We present an experimental investigation of the mechanical stability of silica nanoparticle-based coatings as a function of the size of the nanoparticles. The coatings are built following a layer-by-layer procedure, alternating positive and negative surface charges. The mechanical stability of the multilayers is studied in water, on the basis of an ultrasonic cavitation test. The resistance of the coating to cavitation is found to remarkably increase with decreasing the size of the nanoparticles, indicating an increase of the cohesive energy density. The relative contribution of van der Waals and electrical double-layer interactions to the stability of the multilayer is discussed toward their size dependence.