Search

Sperm complete their maturation in the epididymis. Mature sperm are highly sensitive to oxidative damage. Peroxiredoxin-6 (PRDX6) is an important antioxidant enzyme. In this study, we investigated PRDX6 expression in the epididymal microenvironment and its distribution in the sperm of sheep. We found that PRDX6 mRNA and protein had the highest expression in the caput epididymis, followed by the corpus epididymis and cauda epididymis (p). PRDX6 protein expression in epididymal fluid was higher in the caput epididymis than in the corpus epididymis and cauda epididymis (p). Similarly, PRDX6 protein expression was higher in sperm derived from the caput epididymis and corpus epididymis than in sperm derived from the cauda epididymis (p). Immunofluorescence revealed that PRDX6 was present only in the head of sperm derived from the caput epididymis and corpus epididymis but was distributed within the principal and middle regions of sperm derived from the cauda epididymis. Furthermore, PRDX6 was present in all parts of ejaculated sperm. In conclusion, PRDX6 showed a wider distribution in sperm cells during transport through the epididymis, and PRDX6 expression levels in epididymal tissue, epididymal fluid, and epididymal sperm decreased from the caput epididymis to the cauda epididymis. These results suggest that PRDX6 has an important role during sperm maturation in the epididymis.

Abstract Recent demonstrations of room-temperature lasing in optically pumped GeSn show promise for future CMOS compatible lasers for Si-photonics applications. However, challenges remain for electrically pumped devices. Investigation of the processes that limit device performance is therefore vital in aiding the production of future commercial devices. In this work, a combined experimental and modelling approach is utilised to explore the dominant loss processes in current devices. By manipulating the band structure of functioning devices using high hydrostatic pressure techniques at low temperature, the dominant carrier recombination pathways are identified. This reveals that 93 $$~\pm ~$$ ± 5% of the threshold current is attributable to defect-related recombination at a temperature, T = 85 K. Furthermore, carrier occupation of L-valley states (carrier leakage) is responsible for 1.1 $$~\pm ~$$ ± 0.3% of the threshold current, but this sharply increases to 50% with a decrease of just 30 meV in the L- $$\Gamma$$ Γ separation energy. This indicates that thermal broadening of a similar order may reproduce these adverse effects, limiting device performance at higher temperatures. Temperature dependent calculations show that carrier occupation of indirect valley L-states strongly affects the transparency carrier density and is therefore very sensitive to the Sn composition, leading to an effective operational temperature range for given Sn compositions and strain values. Recommendations for future device designs are proposed based on band structure and growth optimisations.

Comprehensive measurements are vital to obtain big enough datasets for better understanding the complex atmosphere and further improving the air quality. To investigate the 4-year variation of air quality and the influences of special events (Beijing Winter Olympics, COVID lockdown and Chinese New Year) on it during the wintertime in polluted urban air, we conducted comprehensive observations in Beijing, China, during 1 January–20 February, in the years from 2019 to 2022. The mass concentration of PM2.5 and its composition (organics, nitrate, sulfate, ammonium, chloride and black carbon) and the number size distributions of particles (down to ∼1 nm) and ions, gaseous pollutants (CO, NOx, SO2, O3) and condensable vapors (sulfuric acid and oxygenated organic molecules), as well as meteorological parameters, were simultaneously measured. The days before 22 January without any special events in each year were selected to investigate the 4-year variability of air quality. We found that the concentrations of CO, NOx, total oxygenated organic molecules (OOMs), total PM2.5, organics, chloride and black carbon and the number concentration of sub-3 nm particles (N1.3−3) showed similar variations, decreasing from 2019 to 2021 and then increasing in 2022. For SO2, however, its concentration decreased year by year due to the significant emission reduction, further leading to the decrease of gaseous sulfuric acid and particulate sulfate from 2019 to 2022. O3 concentration showed an opposite 4-year variation compared with NOx. Meanwhile, both the oxygen and nitrogen contents of oxygenated organic molecules increased year by year, implying that not only the oxidation state of those compounds increased, but also NOx was involved more efficiently in their formation processes. With higher sulfuric acid concentrations and new particle formation (NPF) frequencies in 2021 than in 2022, and with the lowest concentrations of background aerosols and the lowest ambient temperatures in 2021, N1.3−3 was still the lowest in 2021. Unlike N1.3−3, the ion concentrations in both 0.8–2 and 2–4 nm size ranges were higher in 2021 than in the other years. Then, the days after 4 February were chosen to explore the influence of special events. The non-event days within this date range in 2019 and 2021 were chosen as the reference period. Due to the favorable meteorological conditions together with reductions in anthropogenic emissions, there were basically no haze events during the Olympics. Therefore, CO, NOx, SO2, total OOMs, accumulation-mode particles (N100−1000), and total PM2.5 and its composition were much lower, while ion concentrations were much higher compared with the reference period. Although there was also emission reduction during COVID, especially for NOx, the enhancement of secondary inorganic aerosol formation, together with unfavorable meteorological conditions, caused severe haze events during this period. Hence, CO, total OOMs and all PM2.5 compositions during COVID increased dramatically compared with the reference period. Influenced by SO2, condensation sink and sunlight, sulfuric acid concentration was found to be comparable between the Olympics and the reference period but was lower during COVID and Chinese New Year. Additionally, N1.3−3 was almost at the same level during different periods, indicating that the special events only had little impact on the NPF processes. These results provide useful information to the development of more targeted pollution control plans.

Measurements of the molecular composition of organic aerosol (OA) constituents improve our understanding of sources, formation processes, and physicochemical properties of OA. One instrument providing such data at a time resolution of minutes to hours is the chemical ionization time-of-flight mass spectrometer with filter inlet for gases and aerosols (FIGAERO-CIMS). The technique collects particles on a filter, which are subsequently desorbed, and the evaporated molecules are ionized and analyzed in the mass spectrometer. However, long-term measurements using this technique and/or field deployments at several sites simultaneously require substantial human and financial resources. The analysis of filter samples collected outside the instrument (offline) may provide a more cost-efficient alternative and makes this technology available for the large number of particle filter samples collected routinely at many different sites globally. Filter-based offline use of the FIGAERO-CIMS limits this method, albeit to particle-phase analyses, which is likely at a reduced time resolution compared to online deployments. Here we present the application and assessment of offline FIGAERO-CIMS, using Teflon and quartz fiber filter samples that were collected in autumn 2018 in urban Beijing. We demonstrate the feasibility of the offline application with a “sandwich” sample preparation for the over 900 identified organic compounds with (1) high signal-to-noise ratios, (2) high repeatability, and (3) linear signal response to the filter loadings. Comparable overall signals were observed between the quartz fiber and Teflon filters for 12 and 24 h samples but with larger signals for semi-volatile compounds for the quartz fiber filters, likely due to adsorption artifacts. We also compare desorption profile (thermogram) shapes for the two filter materials. Thermograms are used to derive volatility qualitatively based on the desorption temperature at which the maximum signal intensity of a compound is observed (Tmax⁡). While we find that Tmax⁡ can be determined with high repeatability (±5.7 ∘C) from the duplicate tests for one filter type, we observe considerable differences in Tmax⁡ between the quartz and Teflon filters, warranting further investigation into the thermal desorption characteristics of different filter types. Overall, this study provides a basis for expanding OA molecular characterization by FIGAERO-CIMS to situations where and when deployment of the instrument itself is not possible.

Polychlorinated biphenyls (PCBs) are nowadays mainly unintentionally produced, since their use and manufacture has been banned. PCBs, especially those dioxin-like compounds, have been proven harmful to ecosystems and human health. Detailed information about the spatiotemporally distribution of unintentionally produced PCBs (UP-PCBs) is crucial for understanding the environmental fate and associated health risks. However, research estimating UP-PCBs emission in China is limited. In this study, a source-specific and year-varying emission factor (EF) dataset was used to compile provincial emissions of 12 dioxin-like UP-PCBs congeners for 66 sources in the Chinese mainland from 1960 to 2019. In addition to that, emissions for 2019 were allocated into 0.1∘×0.1∘ grids. The results indicated that historical national UP-PCBs emission represented an increasing trend until around 1995 and then showed an overall decreasing trend from 1995 to 2019. Cement production was the largest UP-PCBs emission source in the Chinese mainland. Geographically, East and North China contributed the largest UP-PCBs emission across the Chinese mainland. High emission densities occurred mainly in the densely populated and well-developed regions such as Yangtze River Delta Urban Agglomeration and Pearl River Delta. Furthermore, highly positive correlations of emission densities with population and GDP densities were identified.

During the COVID-19 lockdown, the dramatic reduction of anthropogenic emissions provided a unique opportunity to investigate the effects of reduced anthropogenic activity and primary emissions on atmospheric chemical processes and the consequent formation of secondary pollutants. Here, we utilize comprehensive observations to examine the response of atmospheric new particle formation (NPF) to the changes in the atmospheric chemical cocktail. We find that the main clustering process was unaffected by the drastically reduced traffic emissions, and the formation rate of 1.5 nm particles remained unaltered. However, particle survival probability was enhanced due to an increased particle growth rate (GR) during the lockdown period, explaining the enhanced NPF activity in earlier studies. For GR at 1.5–3 nm, sulfuric acid (SA) was the main contributor at high temperatures, whilst there were unaccounted contributing vapors at low temperatures. For GR at 3–7 and 7–15 nm, oxygenated organic molecules (OOMs) played a major role. Surprisingly, OOM composition and volatility were insensitive to the large change of atmospheric NOx concentration; instead the associated high particle growth rates and high OOM concentration during the lockdown period were mostly caused by the enhanced atmospheric oxidative capacity. Overall, our findings suggest a limited role of traffic emissions in NPF.

Organic aerosol (OA) is a major component of fine particulate matter (PM), affecting air quality, human health, and the climate. The absorptive and reflective behavior of OA components contributes to determining particle optical properties and thus their effects on the radiative budget of the troposphere. There is limited knowledge on the influence of the molecular composition of OA on particle optical properties in the polluted urban environment. In this study, we characterized the molecular composition of oxygenated OA collected on filter samples in the autumn of 2018 in Beijing, China, with a filter inlet for gases and aerosols coupled to a high-resolution time-of-flight chemical ionization mass spectrometer (FIGAERO–CIMS). Three haze episodes occurred during our sampling period with daily maximum concentrations of OA of 50, 30, and 55 µg m−3. We found that the signal intensities of dicarboxylic acids and sulfur-containing compounds increased during the two more intense haze episodes, while the relative contributions of wood-burning markers and other aromatic compounds were enhanced during the cleaner periods. We further assessed the optical properties of oxygenated OA components by combining detailed chemical composition measurements with collocated particle light absorption measurements. We show that light absorption enhancement (Eabs) of black carbon (BC) was mostly related to more oxygenated OA (e.g., dicarboxylic acids), likely formed in aqueous-phase reactions during the intense haze periods with higher relative humidity, and speculate that they might contribute to lensing effects. Aromatics and nitro-aromatics (e.g., nitrocatechol and its derivatives) were mostly related to a high light absorption coefficient (babs) consistent with light-absorbing (brown) carbon (BrC). Our results provide information on oxygenated OA components at the molecular level associated with BrC and BC particle light absorption and can serve as a basis for further studies on the effects of anthropogenic OA on radiative forcing in the urban environment.

NH3 is the most important alkaline gas in the atmosphere and one of the key species affecting the behaviors of atmospheric aerosols. However, the impact of NH3 on secondary organic aerosol (SOA) formation remains poorly understood, especially the dynamic evolution of chemical compositions in the SOA formation process. In this study, a series of chamber experiments were performed to probe the individual and common effects of NH3 and NOx on toluene SOA formation through OH photooxidation. The chemical compositions of toluene SOA were characterized using the Aerodyne high-resolution time-of-flight aerosol mass spectrometer (AMS). The SOA yield increased from 28.1 % in the absence of NH3 to 34.7 % in the presence of NH3 but decreased to 19.5 % in the presence of NOx. However, the highest SOA yield of 42.7 % and the lowest carbon oxidation state (OSC) occurred in the presence of both NH3 and NOx, indicating that the higher-volatility products that formed in the presence of NOx could partition into the particle phase when NH3 was added. This resulted in a synergetic effect on SOA formation when NH3 and NOx co-existed. The heterogeneous reaction was the main pathway by which NH3 participated in SOA formation in the photooxidation process. The synergetic effect of NH3 and NOx was also observed in SOA optical absorption. A peak at 280 nm, which is characteristic of organonitrogen imidazole compounds, was observed in the presence of NH3, and its intensity increased when NOx was added into the chamber. This work improves our understanding of how the synergistic interactions between NH3 and NOx influence SOA formation and offers new insights into mitigating haze pollution.

The retreat of sea ice has been found to be very significant in the Arctic under global warming. It is projected to continue and will have great impacts on navigation. Perspectives on the changes in sea ice and navigability are crucial to the circulation pattern and future of the Arctic. In this investigation, the decadal changes in sea ice parameters were evaluated by the multi-model from the Coupled Model Inter-comparison Project Phase 6, and Arctic navigability was assessed under two shared socioeconomic pathways (SSPs) and two vessel classes with the Arctic transportation accessibility model. The sea ice extent shows a high possibility of decreasing along SSP5-8.5 under current emissions and climate change. The decadal rate of decreasing sea ice extent will increase in March but decrease in September until 2060, when the oldest ice will have completely disappeared and the sea ice will reach an irreversible tipping point. Sea ice thickness is expected to decrease and transit in certain parts, declining by −0.22 m per decade after September 2060. Both the sea ice concentration and volume will thoroughly decline at decreasing decadal rates, with a greater decrease in volume in March than in September. Open water ships will be able to cross the Northern Sea Route and Northwest Passage between August and October during the period from 2045 to 2055, with a maximum navigable percentage in September. The time for Polar Class 6 (PC6) ships will shift to October–December during the period from 2021 to 2030, with a maximum navigable percentage in October. In addition, the central passage will be open for PC6 ships between September and October during 2021–2030.

As the urban population grows and the global economy develops, municipal solid waste management (MSWM) has become an increasingly prominent global issue. MSWM is particularly difficult in developing countries due to its high cost and time-consuming nature. The Environment-based design (EBD) can potentially contribute to global MSWM by reducing costs and increasing efficiency, especially in helping developing countries identify critical issues in MSWM. This paper uses and demonstrates the effectiveness and efficiency of the EBD method to analyze and identify critical issues in MSWM, using the city of Nairobi as a case study. This paper contains the first two of EBD's three activities: environment analysis and conflict identification, during the design problem period, design knowledge, and design solutions simultaneously and interdependently evolve as a part of the environment. The comparison with the existing literature confirms that the conclusions reached are, to some extent, reliable, time-saving, and less costly, which will offer a possibility to solve the problem of MSWM in impoverished areas.

Although the anthropogenic emissions of SO2 have decreased significantly in China, the decrease in SO42- in PM2.5 is much smaller than that of SO2. This implies an enhanced formation rate of SO42- in the ambient air, and the mechanism is still under debate. This work investigated the formation mechanism of particulate sulfate based on statistical analysis of long-term observations in Shijiazhuang and Beijing supported with flow tube experiments. Our main finding was that the sulfur oxidation ratio (SOR) was exponentially correlated with ambient RH in Shijiazhuang (SOR = 0.15+0.0032×exp⁡(RH/16.2)) and Beijing (SOR = -0.045+0.12×exp⁡(RH/37.8)). In Shijiazhuang, the SOR is linearly correlated with the ratio of aerosol water content (AWC) in PM2.5 (SOR = 0.15+0.40×AWC/PM2.5). Our results suggest that uptake of SO2 instead of oxidation of S(IV) in the particle phase is the rate-determining step for sulfate formation. NH4NO3 plays an important role in the AWC and the change of particle state, which is a crucial factor determining the uptake kinetics of SO2 and the enhanced SOR during haze days. Our results show that NH3 significantly promoted the uptake of SO2 and subsequently the SOR, while NO2 had little influence on SO2 uptake and SOR in the presence of NH3.

Despite the numerous studies investigating haze formation mechanism in China, it is still puzzling that intensive haze episodes could form within hours directly following relatively clean periods. Haze has been suggested to be initiated by the variation of meteorological parameters and then to be substantially enhanced by aerosol–radiation–boundary layer feedback. However, knowledge on the detailed chemical processes and the driving factors for extensive aerosol mass accumulation during the feedback is still scarce. Here, the dependency of the aerosol number size distribution, mass concentration and chemical composition on the daytime mixing layer height (MLH) in urban Beijing is investigated. The size distribution and chemical composition-resolved dry aerosol light extinction is also explored. The results indicate that the aerosol mass concentration and fraction of nitrate increased dramatically when the MLH decreased from high to low conditions, corresponding to relatively clean and polluted conditions, respectively. Particles having their dry diameters in the size of ∼400–700 nm, and especially particle-phase ammonium nitrate and liquid water, contributed greatly to visibility degradation during the winter haze periods. The dependency of aerosol composition on the MLH revealed that ammonium nitrate and aerosol water content increased the most during low MLH conditions, which may have further triggered enhanced formation of sulfate and organic aerosol via heterogeneous reactions. As a result, more sulfate, nitrate and water-soluble organics were formed, leading to an enhanced water uptake ability and increased light extinction by the aerosols. The results of this study contribute towards a more detailed understanding of the aerosol–chemistry–radiation–boundary layer feedback that is likely to be responsible for explosive aerosol mass growth events in urban Beijing.

Trehalose, a naturally nontoxic disaccharide that does not exist in mammals, stabilizes cell membrane integrity under oxidative stress conditions, the mechanism of which is still unclear. Here, we analyzed the effects of trehalose on sheep epididymis epithelial cell (EEC) proliferation and its possible mechanisms. To study the effect of trehalose on EECs, EECs were isolated from testes of 12-month-old sheep; cell counting kit-8 (CCK-8) was used to measure the growth of the cells. Cell proliferation was evaluated by assaying cell cycle and apoptosis, and RT-PCR was utilized to identify the epididymal molecular markers glutathione peroxidase 5 (GPX5) and androgen receptor (AR). Next, reactive oxygen species (ROS) content was evaluated by a dichloro-dihydro-fluorescein diacetate (DCFH-DA) probe. Superoxide dismutase (SOD), catalase (CAT), and glutathione peroxidase (GSH-Px) activities were evaluated by enzyme chemistry methods, and GPX5 expression was evaluated by qRT-PCR and enzyme-linked immunosorbent assay (ELISA). The results showed that 100 mM trehalose significantly improved the proliferation potential of EECs, in which the cells could be serially passaged 14 times with continued normal GPX5 and AR marker gene expression in vitro. The trehalose can increase significantly a proportion of EECs in S phase (P) and decrease significantly the apoptotic rate of EECs (P) compared to the control. Moreover, the trehalose decreased ROS significantly (P) and increased CAT (P) and GSH-Px (P) activities significantly in EECs. GPX5 mRNA and protein expression were also significantly upregulated in trehalose-treated EECs (P and P respectively). Our study suggested that exogenous trehalose exhibited antioxidant activity through increasing the activities of CAT, GSH-Px, and the expression level of GPX5 and could be employed to maintain vitality of sheep EECs during long-term in vitro culture.

Gaseous hydrochloric (HCl) and hydrobromic acid (HBr) are vital halogen species that play essential roles in tropospheric physicochemical processes. Yet, the majority of the current studies on these halogen species were conducted in marine or coastal areas. Detection and source identification of HCl and HBr in inland urban areas remain scarce, thus limiting the full understanding of halogen chemistry and potential atmospheric impacts in the environments with limited influence from the marine sources. Here, both gaseous HCl and HBr were concurrently measured in urban Beijing, China, during winter and early spring of 2019. We observed significant HCl and HBr concentrations ranging from a minimum value at 1 × 108 molecules cm−3 (4 ppt) and 4 × 107 molecules cm−3 (1 ppt) up to 6 × 109 molecules cm−3 (222 ppt) and 1 × 109 molecules cm−3 (37 ppt), respectively. The HCl and HBr concentrations are enhanced along with the increase of atmospheric temperature, UVB and levels of gaseous HNO3. Based on the air mass analysis and high correlations of HCl and HBr with the burning indicators (HCN and HCNO), gaseous HCl and HBr are found to be related to anthropogenic burning aerosols. The gas–particle partitioning may also play a dominant role in the elevated daytime HCl and HBr. During the daytime, the reactions of HCl and HBr with OH radicals lead to significant production of atomic Cl and Br, up to 2 × 104 molecules cm−3 s−1 and 8 × 104 molecules cm−3 s−1, respectively. The production rate of atomic Br (via HBr + OH) is 2–3 times higher than that of atomic Cl (via HCl + OH), highlighting the potential importance of bromine chemistry in the urban area. On polluted days, the production rates of atomic Cl and Br are faster than those on clean days. Furthermore, our observations of elevated HCl and HBr may suggest an important recycling pathway of halogen species in inland megacities and may provide a plausible explanation for the widespread halogen chemistry, which could affect the atmospheric oxidation in China.

Aerosol microphysical processes are essential for the next generation of global and regional climate and air quality models to determine particle size distribution. The contribution of organic aerosols (OAs) to particle formation, mass, and number concentration is one of the major uncertainties in current models. A new global–regional nested aerosol model was developed to simulate detailed microphysical processes. The model combines an advanced particle microphysics (APM) module and a volatility basis set (VBS) OA module to calculate the kinetic condensation of low-volatility organic compounds and equilibrium partitioning of semi-volatile organic compounds in a 3-D framework using global–regional nested domain. In addition to the condensation of sulfuric acid, the equilibrium partitioning of nitrate and ammonium, and the coagulation process of particles, the microphysical processes of the OAs are realistically represented in our new model. The model uses high-resolution size bins to calculate the size distribution of new particles formed through nucleation and subsequent growth. The multi-scale nesting enables the model to perform high-resolution simulations of the particle formation processes in the urban atmosphere in the background of regional and global environments. By using the nested domains, the model reasonably reproduced the OA components obtained from the analysis of aerosol mass spectrometry measurements through positive matrix factorization and the particle number size distribution in the megacity of Beijing during a period of approximately a month. Anthropogenic organic species accounted for 67 % of the OAs of secondary particles formed by nucleation and subsequent growth, which is considerably larger than that of biogenic OAs. On the global scale, the model well predicted the particle number concentration in various environments. The microphysical module combined with the VBS simulated the universal distribution of organic components among the different aerosol populations. The model results strongly suggest the importance of anthropogenic organic species in aerosol particle formation and growth at polluted urban sites and over the whole globe.

Although secondary particulate matter is reported to be the main contributor of PM2.5 during haze in Chinese megacities, primary particle emissions also affect particle concentrations. In order to improve estimates of the contribution of primary sources to the particle number and mass concentrations, we performed source apportionment analyses using both chemical fingerprints and particle size distributions measured at the same site in urban Beijing from April to July 2018. Both methods resolved factors related to primary emissions, including vehicular emissions and cooking emissions, which together make up 76 % and 24 % of total particle number and organic aerosol (OA) mass, respectively. Similar source types, including particles related to vehicular emissions (1.6±1.1 µg m−3; 2.4±1.8×103 cm−3 and 5.5±2.8×103 cm−3 for two traffic-related components), cooking emissions (2.6±1.9 µg m−3 and 5.5±3.3×103 cm−3) and secondary aerosols (51±41 µg m−3 and 4.2±3.0×103 cm−3), were resolved by both methods. Converted mass concentrations from particle size distributions components were comparable with those from chemical fingerprints. Size distribution source apportionment separated vehicular emissions into a component with a mode diameter of 20 nm (“traffic-ultrafine”) and a component with a mode diameter of 100 nm (“traffic-fine”). Consistent with similar day- and nighttime diesel vehicle PM2.5 emissions estimated for the Beijing area, traffic-fine particles, hydrocarbon-like OA (HOA, traffic-related factor resulting from source apportionment using chemical fingerprints) and black carbon (BC) showed similar diurnal patterns, with higher concentrations during the night and morning than during the afternoon when the boundary layer is higher. Traffic-ultrafine particles showed the highest concentrations during the rush-hour period, suggesting a prominent role of local gasoline vehicle emissions. In the absence of new particle formation, our results show that vehicular-related emissions (14 % and 30 % for ultrafine and fine particles, respectively) and cooking-activity-related emissions (32 %) dominate the particle number concentration, while secondary particulate matter (over 80 %) governs PM2.5 mass during the non-heating season in Beijing.

Secondary aerosols are a major component of PM2.5, yet their formation mechanisms in the ambient atmosphere are still unclear. Based on field measurements in downtown Beijing, we show that the photolysis of nitrous acid (HONO) may promote the formation of organic and nitrate aerosols in winter in Beijing, which is supported by the fact that the mass concentrations of organic and nitrate aerosols linearly increase as a function of HONO consumed from early morning to noon. The increased nitrate content also leads to the formation of ammonium particulate matter through enhancing the neutralization of nitrate and sulfate by ammonia. We further illustrate that during pollution events in winter in Beijing, over 50 % of the ambient HONO may be related to traffic-related emissions, including direct emissions and formation via the reaction between OH and vehicle-emitted NO. Overall, our results indicate that traffic-related HONO may play an important role in the oxidative capacity and in turn contribute to haze formation in winter in Beijing. The mitigation of HONO and NOx emissions from vehicles may be an effective way to reduce the formation of secondary aerosols and severe haze events in winter in Beijing.

Urban fire disasters are one of the most frequent disasters that threaten public safety and social development in cities. Most urban fire disasters feature dynamics and processes. The locations, time, meteorological conditions and surroundings of each fire incidents are diverse, besides the traffic conditions around the fire place would be changing dynamically. At present, there is no unified modeling language to describe urban fire incidents, which makes it difficult to obtain experience from historical cases and hard to describe. This paper used the Event pattern Markup Language (EML) to model urban fire incidents from an observation perspective based on MetaObject Facility (MOF) framework, designed and implemented an urban fire incident modeling prototype. It can realize the information description of urban fire disasters, and provide descriptions of different observation missions during the process of the fire incidents. The detailed description of the process allows multiple observations based on the expression of EML to be performed, and offer evidence for emergency response phase and post-mortem archiving. The real data of the "12.1" major fire in Tianjin, China in 2017 was used as a use-case to show the modeling results of the entire fire incident in four phases – mitigation, preparedness, response, and recovery. The results show that this modeling method proposed in this paper can represent the dynamic information of urban fire incidents and achieve the dynamic modeling of urban fire incidents.

Heat treatment of direct metal laser sintering (DMLS) Ti6Al4V (ELI) generates different mechanical properties of the alloy depending on the heat treatment cycle adopted. This is due to the different aspects of the microstructure, such as phase fraction, grain size, texture, and dislocation density, which vary with heat treatment. Other external factors, such as the prevailing level of strain, strain rate, and temperature, also affect the mechanical properties of the material. This paper presents the development of a theoretical model that couples the effects of strain rate, temperature, strain, grain size, and initial dislocation density to describe the flow properties of DMLS Ti6Al4V (ELI). According to the model, higher initial dislocation density results in higher yield stress, low strain hardening, and earlier saturation of flow stress. The model shows that the parabolic shape of the stress-strain curve of the alloy is dictated by the initial dislocation density, which is generally a factor of grain size.

Volatility plays a key role in affecting mass concentrations and the lifetime of aerosol particles in the atmosphere, yet our knowledge of aerosol volatility in relatively polluted environment, e.g., north China, remains poor. Here aerosol volatility in Beijing in summer 2017 and 2018 was measured using a thermodenuder (TD) coupled with an Aerodyne high-resolution aerosol mass spectrometer (AMS) and a soot particle AMS. Our results showed overall similar thermograms for most non-refractory aerosol species compared with those reported in previous studies. However, high mass fraction remaining and NO+/NO2+ ratio for chloride and nitrate, each above 200 ∘C, indicated the presence of considerable metallic salts and organic nitrates in Beijing. The volatility distributions of organic aerosol (OA) and four OA factors that were resolved from positive matrix factorization were estimated using a mass transfer model. The ambient OA comprised mainly semi-volatile organic compounds (SVOCs; 63 %) with an average effective saturation concentration (C*) of 0.55 µg m−3, suggesting overall more volatile properties than OA in megacities of Europe and the US. Further analysis showed that the freshly oxidized secondary OA was the most volatile OA factor (SVOC = 70 %) followed by hydrocarbon-like OA (HOA). In contrast, the volatility of more oxidized oxygenated OA (MO-OOA) was comparable to that of cooking OA with SVOC on average accounting for 60.2 %. We also compared the volatility of ambient and black-carbon-containing OA. Our results showed that the BC-containing primary OA (POA) was much more volatile than ambient POA (C*=0.69 µg m−3 vs. 0.37 µg m−3), while the BC-containing SOA was much less volatile, highlighting the very different composition and properties between BC-containing and ambient aerosol particles.

As major chemical components of airborne fine particulate matter (PM2.5), organic carbon (OC) and elemental carbon (EC) have vital impacts on air quality, climate change, and human health. Because OC and EC are closely associated with fuel combustion, it is helpful for the scientific community and policymakers assessing the efficacy of air pollution control measures to study the impact of control measures and regional transport on OC and EC levels. In this study, hourly mass concentrations of OC and EC associated with PM2.5 were semi-continuously measured from March 2013 to February 2018. The results showed that annual mean OC and EC concentrations declined from 14.0 to 7.7 µg m−3 and from 4.0 to 2.6 µg m−3, respectively, from March 2013 to February 2018. In combination with the data of OC and EC in previous studies, an obvious decreasing trend in OC and EC concentrations was found, which was caused by clean energy policies and effective air pollution control measures. However, no obvious change in the ratios of OC and EC to the PM2.5 mass (on average, 0.164 and 0.049, respectively) was recorded, suggesting that inorganic ions still contributed a lot to PM2.5. Based on the seasonal variations in OC and EC, it appeared that higher OC and EC concentrations were still observed in the winter months, with the exception of winter of 2017–2018. Traffic policies executed in Beijing resulted in nighttime peaks of OC and EC, caused by heavy-duty vehicles and heavy-duty diesel vehicles being permitted to operate from 00:00 to 06:00 (China standard time, UTC+8, for all times throughout the paper). In addition, the fact that there was no traffic restriction in weekends led to higher concentrations on weekends compared to weekdays. Significant correlations between OC and EC were observed throughout the study period, suggesting that OC and EC originated from common emission sources, such as exhaust of vehicles and fuel combustion. OC and EC levels increased with enhanced SO2, CO, and NOx concentrations while the O3 and OC levels were enhanced simultaneously when O3 concentrations were higher than 50 µg m−3. Non-parametric wind regression analysis was performed to examine the sources of OC and EC in the Beijing area. It was found that there were distinct hot spots in the northeast wind sector at wind speeds of approximately 0–6 km h−1, as well as diffuse signals in the southwestern wind sectors. Source areas further away from Beijing were assessed by potential source contribution function (PSCF) analysis. A high-potential source area was precisely pinpointed, which was located in the northwestern and southern areas of Beijing in 2017 instead of solely in the southern areas of Beijing in 2013. This work shows that improvement of the air quality in Beijing benefits from strict control measures; however, joint prevention and control of regional air pollution in the regions is needed for further improving the air quality. The results provide a reference for controlling air pollution caused by rapid economic development in developing countries.

There exist several results of mass balance of the Antarctic Ice Sheet (AIS) estimated based the laser altimetry ICESat, especially for some with a significant difference. In this study, we attempt to use the ICESat data to re-estimate the mass balance of the AIS over 2003-2008 by making several systematic improvements in data processing and model construction. We applied all corrections to the ICESat data including the re-estimation of the ICB. A three-step model was used in different area for calculating elevation changes of the Antarctica ice sheet. The elevation change rate was compared with other results generated from Global Position System (GPS), stakes, Airborne Terrain Mapper (ATM) and CHINRE data. These verification data proved a good agreement between each other considering the uncertainty involved. We also corrected the component in the elevation change rates that do not contribute to the mass loss such as the global isostatic correction and firn compaction. The corrected elevation change result was converted to the mass change using a surface density model.

Aerosol particles are of importance in the Earth's radiation budget since they scatter and absorb sunlight. While extensive studies of aerosol optical properties have been conducted at ground sites, vertical measurements and characterization are very limited in megacities. In this work, we present simultaneous real-time online measurements of aerosol optical properties at ground level and at 260 m on a meteorological tower from 16 November to 13 December in 2016 in Beijing along with measurements of continuous vertical profiles during two haze episodes. The average (±1σ) scattering and absorption coefficients (bsca and babs; λ=630 nm) were 337.6 (±356.0) and 36.6 (±33.9) Mm−1 at 260 m, which were 26.5 % and 22.5 % lower than those at ground level. Single scattering albedo (SSA), however, was comparable between the two heights, with slightly higher values at ground level (0.89±0.04). Although bsca and babs showed overall similar temporal variations between ground level and 260 m, the ratios of 260 m to ground varied substantially from less than 0.4 during the clean stages of haze episodes to > 0.8 in the late afternoon. A more detailed analysis indicates that vertical profiles of bsca, babs, and SSA in the low atmosphere were closely related to the changes in meteorological conditions and mixing layer height. The mass absorption cross section (MAC) of equivalent black carbon (eBC, λ=630 nm) varied substantially from 9.5 to 13.2 m2 g−1 in winter in Beijing, and it was strongly associated with the mass ratio of coating materials on refractory BC (rBC) to rBC (MR), and also the oxidation degree of organics in rBC-containing particles. Our results show that the increases in MAC of eBC in winter were mainly caused by photochemically produced secondary materials. Light absorption of organic carbon (brown carbon, BrC) was also important in winter, which on average accounted for 46 (±8.5) % and 48 (±9.3) % of the total absorption at 370 nm at ground level and 260 m, respectively. A linear regression model combined with positive matrix factorization analysis was used to show that coal combustion was the dominant source contribution of BrC (48 %–55 %) followed by biomass burning (17 %) and photochemically processed secondary organic aerosol (∼20 %) in winter in Beijing.

The North China Plain (NCP) has experienced frequent severe haze pollution events in recent years. While extensive measurements have been made in megacities, aerosol sources, processes, and particle growth at urban downwind sites remain less understood. Here, an aerosol chemical speciation monitor and a scanning mobility particle sizer, along with a suite of collocated instruments, were deployed at the downwind site of Xingtai, a highly polluted city in the NCP, for real-time measurements of submicron aerosol (PM1) species and particle number size distributions during May and June 2016. The average mass concentration of PM1 was 30.5 (±19.4) µg m−3, which is significantly lower than that during wintertime. Organic aerosols (OAs) constituted the major fraction of PM1 (38 %), followed by sulfate (25 %) and nitrate (14 %). Positive matrix factorization with the multilinear engine version 2 showed that oxygenated OA (OOA) was the dominant species in OA throughout the study, on average accounting for 78 % of OA, while traffic and cooking emissions both accounted for 11 % of OA. Our results highlight that aerosol particles at the urban downwind site were highly aged and mainly from secondary formation. However, the diurnal cycle also illustrated the substantial influence of urban emissions on downwind sites, which are characterized by similar pronounced early morning peaks for most aerosol species. New particle formation and growth events were also frequently observed (58 % of the time) on both clean and polluted days. Particle growth rates varied from 1.2 to 4.9 nm h−1 and our results showed that sulfate and OOA played important roles in particle growth during clean periods, while OOA was more important than sulfate during polluted events. Further analyses showed that particle growth rates have no clear dependence on air mass trajectories.

The heterogeneous hydrolysis of dinitrogen pentoxide (N2O5) has a significant impact on both nocturnal particulate nitrate formation and photochemistry on the following day through the photolysis of nitryl chloride (ClNO2), yet these processes in highly polluted urban areas remain poorly understood. Here we present measurements of gas-phase N2O5 and ClNO2 by high-resolution time-of-flight chemical ionization mass spectrometer (ToF-CIMS) during summer in urban Beijing, China as part of the Air Pollution and Human Health (APHH) campaign. N2O5 and ClNO2 show large day-to-day variations with average (±1σ) mixing ratios of 79.2±157.1 and 174.3±262.0 pptv, respectively. High reactivity of N2O5, with τ (N2O5)−1 ranging from 0.20  ×  10−2 to 1.46  ×  10−2 s−1, suggests active nocturnal chemistry and a large nocturnal nitrate formation potential via N2O5 heterogeneous uptake. The lifetime of N2O5, τ (N2O5), decreases rapidly with the increase in aerosol surface area, yet it varies differently as a function of relative humidity with the highest value peaking at ∼  40 %. The N2O5 uptake coefficients estimated from the product formation rates of ClNO2 and particulate nitrate are in the range of 0.017–0.19, corresponding to direct N2O5 loss rates of 0.00044–0.0034 s−1. Further analysis indicates that the fast N2O5 loss in the nocturnal boundary layer in urban Beijing is mainly attributed to its indirect loss via NO3, for example through the reactions with volatile organic compounds and NO, while the contribution of the heterogeneous uptake of N2O5 is comparably small (7–33 %). High ClNO2 yields ranging from 0.10 to 0.35 were also observed, which might have important implications for air quality by affecting nitrate and ozone formation.

This study investigates aerosol hygroscopicity, mixing state, and cloud condensation nucleation as part of the Atmosphere–Aerosol–Boundary Layer–Cloud Interaction Joint Experiment performed in the summer of 2016 at Xingtai (XT), a suburban site located in the center of the North China Plain (NCP). In general, the probability density function (PDF) of the hygroscopicity parameter (κ) for 40–200 nm particles had a unimodal distribution, and mean κ-PDF patterns for different sizes were similar, suggesting that the particles were highly aged and internally mixed because of strong photochemical reactions. The κ calculated from the hygroscopic growth factor in the daytime and at night suggests that photochemical reactions largely enhanced the aerosol hygroscopicity. This effect became weaker as the particle size increased. In addition, the aerosol hygroscopicity was much larger at XT than at other sites in the NCP. This is because new particle formation takes place much more frequently in the central NCP, which is heavily polluted from industrial activities, than elsewhere in the region. The evolution of the planetary boundary layer played a dominant role in dictating aerosol mass concentration. Particle size was the most important factor influencing the ability of aerosols to activate, whereas the effect of chemical composition was secondary, especially when supersaturation was high. Using a fixed value of κ = 0.31 to calculate the cloud condensation nuclei number concentration in this region suffices.

Models based on physical principles or semi-empirical parameterizations have used to compute the firn density, which is essential for the study of surface processes in the Antarctic ice sheet. However, parameterization of surface snow density is often challenged by the description of detailed local characterization. In this study we propose to generate a surface density map for East Antarctica from all the filed observations that are available. Considering that the observations are non-uniformly distributed around East Antarctica, obtained by different methods, and temporally inhomogeneous, the field observations are used to establish an initial density map with a grid size of 30 × 30 km2 in which the observations are averaged at a temporal scale of five years. We then construct an observation matrix with its columns as the map grids and rows as the temporal scale. If a site has an unknown density value for a period, we will set it to 0 in the matrix. In order to construct the main spatial and temple information of surface snow density matrix we adopt Empirical Orthogonal Function (EOF) method to decompose the observation matrix and only take first several lower-order modes, because these modes already contain most information of the observation matrix. However, there are a lot of zeros in the matrix and we solve it by using matrix completion algorithm, and then we derive the time series of surface snow density at each observation site. Finally, we can obtain the surface snow density by multiplying the modes interpolated by kriging with the corresponding amplitude of the modes. Comparative analysis have done between our surface snow density map and model results. The above details will be introduced in the paper.

Despite extensive efforts toward the characterization of submicron aerosols at ground level in the megacity of Beijing, our understanding of aerosol sources and processes at high altitudes remains low. Here we conducted a 3-month real-time measurement of non-refractory submicron aerosol (NR-PM1) species at a height of 260 m from 10 October 2014 to 18 January 2015 using an aerosol chemical speciation monitor. Our results showed a significant change in aerosol composition from the non-heating period (NHP) to the heating period (HP). Organics and chloride showed clear increases during HP due to coal combustion emissions, while nitrate showed substantial decreases from 28 to 15–18 %. We also found that NR-PM1 species in the heating season can have average mass differences of 30–44 % under similar emission sources yet different meteorological conditions. Multi-linear engine 2 (ME-2) using three primary organic aerosol (OA) factors as constraints, i.e., fossil-fuel-related OA (FFOA) dominantly from coal combustion emissions, cooking OA (COA), and biomass burning OA (BBOA) resolved from ground high-resolution aerosol mass spectrometer measurements, was applied to OA mass spectra of ACSM. Two types of secondary OA (SOA) that were well correlated with nitrate and chloride–CO, respectively, were identified. SOA played a dominant role in OA during all periods at 260 m although the contributions were decreased from 72 % during NHP to 58–64 % during HP. The SOA composition also changed significantly from NHP to HP. While the contribution of oxygenated OA (OOA) was decreased from 56–63 to 32–40 %, less oxidized OOA (LO-OOA) showed a large increase from 9–16 to 24–26 %. COA contributed a considerable fraction of OA at high altitude, and the contribution was relatively similar across different periods (10–13 %). In contrast, FFOA showed a large increase during HP due to the influences of coal combustion emissions. We also observed very different OA composition between ground level and 260 m. Particularly, the contributions of COA and BBOA at the ground site were nearly twice those at 260 m, while SOA at 260 m was ∼ 15–34 % higher than that at ground level. Bivariate polar plots and back-trajectory analysis further illustrated the different source regions of OA factors in different seasons.

By combining in situ measurements and a two-dimensional thermomechanically coupled ice flow model, we investigate the thermomechanical features of the largest valley glacier (Laohugou Glacier No. 12; LHG12) on Qilian Shan located in the arid region of western China. Our model results suggest that LHG12, previously considered as fully cold, is probably polythermal, with a lower temperate ice layer overlain by an upper layer of cold ice over a large region of the ablation area. Modelled ice surface velocities match well with the in situ observations in the east branch (main branch) but clearly underestimate those near the glacier terminus, possibly because the convergent flow is ignored and the basal sliding beneath the confluence area is underestimated. The modelled ice temperatures are in very good agreement with the in situ measurements from a deep borehole (110 m deep) in the upper ablation area. The model results are sensitive to surface thermal boundary conditions, for example surface air temperature and near-surface ice temperature. In this study, we use a Dirichlet surface thermal condition constrained by 20 m borehole temperatures and annual surface air temperatures. Like many other alpine glaciers, strain heating is important in controlling the englacial thermal structure of LHG12. Our transient simulations indicate that the accumulation zone becomes colder during the last two decades as a response to the elevated equilibrium line altitude and the rising summer air temperatures. We suggest that the extent of accumulation basin (the amount of refreezing latent heat from meltwater) of LHG12 has a considerable impact on the englacial thermal status.

We conducted the first real-time continuous vertical measurements of particle extinction (bext), gaseous NO2, and black carbon (BC) from ground level to 260 m during two severe winter haze episodes at an urban site in Beijing, China. Our results illustrated four distinct types of vertical profiles: (1) uniform vertical distributions (37 % of the time) with vertical differences less than 5 %, (2) higher values at lower altitudes (29 %), (3) higher values at higher altitudes (16 %), and (4) significant decreases at the heights of ∼ 100–150 m (14 %). Further analysis demonstrated that vertical convection as indicated by mixing layer height, temperature inversion, and local emissions are three major factors affecting the changes in vertical profiles. Particularly, the formation of type 4 was strongly associated with the stratified layer that was formed due to the interactions of different air masses and temperature inversions. Aerosol composition was substantially different below and above the transition heights with ∼ 20–30 % higher contributions of local sources (e.g., biomass burning and cooking) at lower altitudes. A more detailed evolution of vertical profiles and their relationship with the changes in source emissions, mixing layer height, and aerosol chemistry was illustrated by a case study. BC showed overall similar vertical profiles as those of bext (R2 = 0.92 and 0.69 in November and January, respectively). While NO2 was correlated with bext for most of the time, the vertical profiles of bext ∕ NO2 varied differently for different profiles, indicating the impact of chemical transformation on vertical profiles. Our results also showed that more comprehensive vertical measurements (e.g., more aerosol and gaseous species) at higher altitudes in the megacities are needed for a better understanding of the formation mechanisms and evolution of severe haze episodes in China.

In performance-based seismic design, ground-motion time histories are needed for analyzing dynamic responses of nonlinear structural systems. However, the number of ground-motion data at design level is often limited. In order to analyze seismic performance of structures, ground-motion time histories need to be either selected from recorded strong-motion database or numerically simulated using stochastic approaches. In this paper, a detailed procedure to select proper acceleration time histories from the Next Generation Attenuation (NGA) database for several cities in Taiwan is presented. Target response spectra are initially determined based on a local ground-motion prediction equation under representative deterministic seismic hazard analyses. Then several suites of ground motions are selected for these cities using the Design Ground Motion Library (DGML), a recently proposed interactive ground-motion selection tool. The selected time histories are representatives of the regional seismic hazard and should be beneficial to earthquake studies when comprehensive seismic hazard assessments and site investigations are unavailable. Note that this method is also applicable to site-specific motion selections with the target spectra near the ground surface considering the site effect.

This paper analyzes the precision and deviation of elevations acquired from Envisat and The Ice, Cloud and Land Elevation Satellite (ICESat) over typical ice gaining and losing regions, i.e. Lambert-Amery System (LAS) in east Antarctica, and Amundsen Sea Sector (ASS) in west Antarctica, during the same period from 2003 to 2008. We used GLA12 dataset of ICESat and Level 2 data of Envisat. Data preprocessing includes data filtering, projection transformation and track classification. Meanwhile, the slope correction is applied to Envisat data and saturation correction for ICESat data. Then the crossover analysis was used to obtain the crossing points of the ICESat tracks, Envisat tracks and ICESat-Envisat tracks separately. The two tracks we chose for cross-over analysis should be in the same campaign for ICESat (within 33 days) or the same cycle for Envisat (within 35 days).The standard deviation of a set of elevation residuals at time-coincident crossovers is calculated as the precision of each satellite while the mean value is calculated as the deviation of ICESat-Envisat. Generally, the ICESat laser altimeter gets a better precision than the Envisat radar altimeter. For Amundsen Sea Sector, the ICESat precision is found to vary from 8.9 cm to 17 cm and the Envisat precision varies from 0.81 m to 1.57 m. For LAS area, the ICESat precision is found to vary from 6.7 cm to 14.3 cm and the Envisat precision varies from 0.46 m to 0.81 m. Comparison result between Envisat and ICESat elevations shows a mean difference of 0.43 ±7.14 m for Amundsen Sea Sector and 0.53 ± 1.23 m over LAS.

Despite extensive studies into the characterization of particle number size distributions at ground level, real-time measurements above the urban canopy in the megacity of Beijing have never been performed to date. Here we conducted the first simultaneous measurements of size-resolved particle number concentrations at ground level and 260 m in urban Beijing from 22 August to 30 September. Our results showed overall similar temporal variations in number size distributions between ground level and 260 m, yet periods with significant differences were also observed. Particularly, accumulation-mode particles were highly correlated (r2 = 0. 85) at the two heights, while Aitken-mode particles presented more differences. Detailed analysis suggests that the vertical differences in number concentrations strongly depended on particle size, and particles with a mobility diameter between 100 and 200 nm generally showed higher concentrations at higher altitudes. Particle growth rates and condensation sinks were also calculated, which were 3.2 and 3.6 nm h−1, and 2.8 × 10−2 and 2.9 × 10−2 s−1, at ground level and 260 m, respectively. By linking particle growth with aerosol composition, we found that organics appeared to play an important role in the early stage of the growth (09:00–12:00 LT) while sulfate was also important during the later period. Positive matrix factorization of size-resolved number concentrations identified three common sources at ground level and 260 m, including a factor associated with new particle formation and growth events (NPEs), and two secondary factors that represent photochemical processing and regional transport. Cooking emission was found to have a large contribution to small particles and showed much higher concentration at ground level than 260 m in the evening. These results imply that investigation of NPEs at ground level in megacities needs to consider the influences of local cooking emissions. The impacts of regional emission controls on particle number concentrations were also illustrated. Our results showed that regional emission controls have a dominant impact on accumulation-mode particles by decreasing gas precursors and particulate matter loadings, and hence suppressing particle growth. In contrast, the influences on Aitken particles were much smaller due to the enhanced new particle formation (NPF) events.

A series of strict emission control measures was implemented in Beijing and the surrounding seven provinces to ensure good air quality during the 2015 China Victory Day parade, rendering a unique opportunity to investigate the anthropogenic impact of aerosol properties. Submicron aerosol hygroscopicity and volatility were measured during and after the control period using a hygroscopic and volatile tandem differential mobility analyzer (H/V-TDMA) system. Three periods, namely the control clean period (Clean1), the non-control clean period (Clean2), and the non-control pollution period (Pollution), were selected to study the effect of the emission control measures on aerosol hygroscopicity and volatility. Aerosol particles became more hydrophobic and volatile due to the emission control measures. The hygroscopicity parameter (κ) of 40–200 nm particles decreased by 32.0–8.5 % during the Clean1 period relative to the Clean2 period, while the volatile shrink factor (SF) of 40–300 nm particles decreased by 7.5–10.5 %. The emission controls also changed the diurnal variation patterns of both the probability density function of κ (κ-PDF) and the probability density function of SF (SF-PDF). During Clean1 the κ-PDF showed one nearly hydrophobic (NH) mode for particles in the nucleation mode, which was likely due to the dramatic reduction in industrial emissions of inorganic trace gases. Compared to the Pollution period, particles observed during the Clean1 and Clean2 periods exhibited a more significant nonvolatile (NV) mode throughout the day, suggesting a more externally mixed state particularly for the 150 nm particles. Aerosol hygroscopicities increased as particle sizes increased, with the greatest increases seen during the Pollution period. Accordingly, the aerosol volatility became weaker (i.e., SF increased) as particle sizes increased during the Clean1 and Clean2 periods, but no apparent trend was observed during the Pollution period. Based on a correlation analysis of the number fractions of NH and NV particles, we found that a higher number fraction of hydrophobic and volatile particles during the emission control period.

Strict emission controls were implemented in Beijing and adjacent provinces to ensure good air quality during the 2015 China Victory Day parade. Here, we conducted synchronous measurements of submicron aerosols (PM1) at ground level and 260 m on a meteorological tower by using a high-resolution aerosol mass spectrometer and an aerosol chemical speciation monitor, respectively, in Beijing from 22 August to 30 September. Our results showed that the average PM1 concentrations are 19.3 and 14.8 µg m−3 at ground level and 260 m, respectively, during the control period (20 August–3 September), which are 57 and 50 % lower than those after the control period (4–30 September). Organic aerosols (OAs) dominated PM1 during the control period at both ground level and 260 m (55 and 53 %, respectively), while their contribution showed substantial decreases (∼ 40 %) associated with an increase in secondary inorganic aerosols (SIAs) after the parade, indicating a larger impact of emission controls on SIA than OA. Positive matrix factorization of OA further illustrated that primary OA (POA) showed similar decreases as secondary OA (SOA) at both ground level (40 % vs. 42 %) and 260 m (35 % vs. 36 %). However, we also observed significant changes in SOA composition at ground level. While the more oxidized SOA showed a large decrease by 75 %, the less oxidized SOA was comparable during (5.6 µg m−3) and after the control periods (6.5 µg m−3). Our results demonstrated that the changes in meteorological conditions and PM loadings have affected SOA formation mechanisms, and the photochemical production of fresh SOA was more important during the control period. By isolating the influences of meteorological conditions and footprint regions in polluted episodes, we found that regional emission controls on average reduced PM levels by 44–45 %, and the reductions were close among SIA, SOA and POA at 260 m, whereas primary species showed relatively more reductions (55–67 %) than secondary aerosol species (33–44 %) at ground level.

Winter has the worst air pollution of the year in the megacity of Beijing. Despite extensive winter studies in recent years, our knowledge of the sources, formation mechanisms and evolution of aerosol particles is not complete. Here we have a comprehensive characterization of the sources, variations and processes of submicron aerosols that were measured by an Aerodyne high-resolution aerosol mass spectrometer from 17 December 2013 to 17 January 2014 along with offline filter analysis by gas chromatography/mass spectrometry. Our results suggest that submicron aerosols composition was generally similar across the winter of different years and was mainly composed of organics (60 %), sulfate (15 %) and nitrate (11 %). Positive matrix factorization of high- and unit-mass resolution spectra identified four primary organic aerosol (POA) factors from traffic, cooking, biomass burning (BBOA) and coal combustion (CCOA) emissions as well as two secondary OA (SOA) factors. POA dominated OA, on average accounting for 56 %, with CCOA being the largest contributor (20 %). Both CCOA and BBOA showed distinct polycyclic aromatic hydrocarbons (PAHs) spectral signatures, indicating that PAHs in winter were mainly from coal combustion (66 %) and biomass burning emissions (18 %). BBOA was highly correlated with levoglucosan, a tracer compound for biomass burning (r2 = 0.93), and made a considerable contribution to OA in winter (9 %). An aqueous-phase-processed SOA (aq-OOA) that was strongly correlated with particle liquid water content, sulfate and S-containing ions (e.g. CH2SO2+) was identified. On average aq-OOA contributed 12 % to the total OA and played a dominant role in increasing oxidation degrees of OA at high RH levels (> 50 %). Our results illustrate that aqueous-phase processing can enhance SOA production and oxidation states of OA as well in winter. Further episode analyses highlighted the significant impacts of meteorological parameters on aerosol composition, size distributions, oxidation states of OA and evolutionary processes of secondary aerosols.

The mitigation of air pollution in megacities remains a great challenge because of the complex sources and formation mechanisms of aerosol particles. The 2014 Asia-Pacific Economic Cooperation (APEC) summit in Beijing serves as a unique experiment to study the impacts of emission controls on aerosol composition, size distributions, and oxidation properties. Herein, a high-resolution time-of-flight aerosol mass spectrometer was deployed in urban Beijing for real-time measurements of size-resolved non-refractory submicron aerosol (NR-PM1) species from 14 October to 12 November 2014, along with a range of collocated measurements. The average (±σ) PM1 was 41.6 (±38.9) μg m−3 during APEC, which was decreased by 53 % compared with that before APEC. The aerosol composition showed substantial changes owing to emission controls during APEC. Secondary inorganic aerosol (SIA: sulfate + nitrate + ammonium) showed significant reductions of 62–69 %, whereas organics presented much smaller decreases (35 %). The results from the positive matrix factorization of organic aerosol (OA) indicated that highly oxidized secondary organic aerosol (SOA) showed decreases similar to those of SIA during APEC. However, primary organic aerosol (POA) from cooking, traffic, and biomass-burning sources were comparable to those before APEC, indicating the presence of strong local source emissions. The oxidation properties showed corresponding changes in response to OA composition. The average oxygen-to-carbon level during APEC was 0.36 (±0.10), which is lower than the 0.43 (±0.13) measured before APEC, demonstrating a decrease in the OA oxidation degree. The changes in size distributions of primary and secondary species varied during APEC. SIA and SOA showed significant reductions in large accumulation modes with peak diameters shifting from ~ 650 to 400 nm during APEC, whereas those of POA remained relatively unchanged. The changes in aerosol composition, size distributions, and oxidation degrees during the aging processes were further illustrated in a case study of a severe haze episode. Our results elucidated a complex response of aerosol chemistry to emission controls, which has significant implications that emission controls over regional scales can substantially reduce secondary particulates. However, stricter emission controls for local source emissions are needed for further mitigating air pollution in the megacity of Beijing.

The megacity of Beijing has experienced frequent severe fine particle pollution during the last decade. Although the sources and formation mechanisms of aerosol particles have been extensively investigated on the basis of ground measurements, real-time characterization of aerosol particle composition and sources above the urban canopy in Beijing is rare. In this study, we conducted real-time measurements of non-refractory submicron aerosol (NR-PM1) composition at 260 m at the Beijing 325 m meteorological tower (BMT) from 10 October to 12 November 2014, by using an aerosol chemical speciation monitor (ACSM) along with synchronous measurements of size-resolved NR-PM1 composition near ground level using a high-resolution time-of-flight aerosol mass spectrometer (HR–ToF–AMS). The NR-PM1 composition above the urban canopy was dominated by organics (46 %), followed by nitrate (27 %) and sulfate (13 %). The high contribution of nitrate and high NO3− / SO42− mass ratios illustrates an important role of nitrate in particulate matter (PM) pollution during the study period. The organic aerosol (OA) was mainly composed of secondary OA (SOA), accounting for 61 % on an average. Different from that measured at the ground site, primary OA (POA) correlated moderately with SOA, likely suggesting a high contribution from regional transport above the urban canopy. The Asia–Pacific Economic Cooperation (APEC) summit with strict emission controls provides a unique opportunity to study the impacts of emission controls on aerosol chemistry. All aerosol species were shown to have significant decreases of 40–80 % during APEC from those measured before APEC, suggesting that emission controls over regional scales substantially reduced PM levels. However, the bulk aerosol composition was relatively similar before and during APEC as a result of synergetic controls of aerosol precursors. In addition to emission controls, the routine circulations of mountain–valley breezes were also found to play an important role in alleviating PM levels and achieving the "APEC blue" effect. The evolution of vertical differences between 260 m and the ground level was also investigated. Our results show complex vertical differences during the formation and evolution of severe haze episodes that are closely related to aerosol sources and boundary-layer dynamics.

High concentrations of fine particles (PM2.5) are frequently observed during all seasons in Beijing, China, leading to severe air pollution and human health problems in this megacity. In this study, we conducted real-time measurements of non-refractory submicron aerosol (NR-PM1) species (sulfate, nitrate, ammonium, chloride, and organics) in Beijing using an Aerodyne Aerosol Chemical Speciation Monitor for 1 year, from July 2011 to June 2012. This is the first long-term, highly time-resolved (~ 15 min) measurement of fine particle composition in China. The seasonal average (±1σ) mass concentration of NR-PM1 ranged from 52 (±49) μg m−3 in the spring season to 62 (±49) μg m−3 in the summer season, with organics being the major fraction (40–51 %), followed by nitrate (17–25 %) and sulfate (12–17 %). Organics and chloride showed pronounced seasonal variations, with much higher concentrations in winter than in the other seasons, due to enhanced coal combustion emissions. Although the seasonal variations of secondary inorganic aerosol (SIA, i.e., sulfate + nitrate + ammonium) concentrations were not significant, higher contributions of SIA were observed in summer (57–61 %) than in winter (43–46 %), indicating that secondary aerosol production is a more important process than primary emissions in summer. Organics presented pronounced diurnal cycles that were similar among all seasons, whereas the diurnal variations of nitrate were mainly due to the competition between photochemical production and gas–particle partitioning. Our data also indicate that high concentrations of NR-PM1 (> 60 μg m−3) are usually associated with high ambient relative humidity (RH) (> 50 %) and that severe particulate pollution is characterized by different aerosol composition in different seasons. All NR-PM1 species showed evident concentration gradients as a function of wind direction, generally with higher values associated with wind from the south, southeast or east. This was consistent with their higher potential as source areas, as determined by potential source contribution function analysis. A common high potential source area, located to the southwest of Beijing along the Taihang Mountains, was observed during all seasons except winter, when smaller source areas were found. These results demonstrate a high potential impact of regional transport from surrounding regions on the formation of severe haze pollution in Beijing.

Atmospheric aerosols exert highly uncertain impacts on radiative forcing and also have detrimental effects on human health. While aerosol particles are widely characterized in megacities in China, aerosol composition, sources and particle growth in rural areas in the Tibetan Plateau remain less understood. Here we present the results from an autumn study that was conducted from 5 September to 15 October 2013 at a national background monitoring station (3295 m a.s.l.) in the Tibetan Plateau. The submicron aerosol composition and particle number size distributions were measured in situ with an Aerodyne Aerosol Chemical Speciation Monitor (ACSM) and a Scanning Mobility Particle Sizer (SMPS). The average mass concentration of submicron aerosol (PM1) is 11.4 μg m−3 (range: 1.0–78.4 μg m−3) for the entire study, which is much lower than observed at urban and rural sites in eastern China. Organics dominated PM1, accounting for 43 % on average, followed by sulfate (28 %) and ammonium (11 %). Positive Matrix Factorization analysis of ACSM organic aerosol (OA) mass spectra identified an oxygenated OA (OOA) and a biomass burning OA (BBOA). The OOA dominated OA composition, accounting for 85 % on average, 17 % of which was inferred from aged BBOA. The BBOA contributed a considerable fraction of OA (15 %) due to the burning of cow dung and straw in September. New particle formation and growth events were frequently observed (80 % of time) throughout the study. The average particle growth rate is 2.0 nm h−1 (range: 0.8–3.2 nm h−1). By linking the evolution of particle number size distribution to aerosol composition, we found an elevated contribution of organics during particle growth periods and also a positive relationship between the growth rate and the fraction of OOA in OA, which potentially indicates an important role of organics in particle growth in the Tibetan Plateau.

Hydrocracking is a catalytic cracking process for the conversion of heavy oil fractions, such as vacuum gas oil (VGO), into valuable products with lower boiling point, such as diesel, kerosene and gasoline. Due to the flexibility of the process, high yields and good quality of liquid products, hydrocracking has become an important unit in modern refinery. However, the study of kinetic modelling towards hydrocracking reactor (HCR) is limited due to its complicated reaction mechanism. In this study, the reactor model is established based on a new six-lump model considering the velocity change along the reactor, different thermal effects and kinetic differences between hydrotreater (HT) and hydrocracker (HC). Compared with the previously reported lumped kinetic models, the fine-tuned model (calibrated by differential evolution algorithm) can predict products yields more accurately, in particular outlet temperature of each beds and the detailed yields and temperature distribution along with the reactor beds. The proposed lump based kinetic model can be applied to the optimization and control of industrial hydrocracking process.

Terephthalic acid is a raw material for polyester and textile industry. However, the by-product 4- Carboxybenzaldehyde in TA is harmful to the polymer process since it can lower the polymerization rate and the average molecular weight. Thus, a hydropurification process is built to decrease 4-CBA. In this process, 4- CBA in TA is purified by hydrogen in water at 270 °C–290 °C under 7.9 MPa pressure over 0.5 wt. % carbon- coated palladium catalyst in a fixed-bed reactor. The activity of the catalyst will gradually decrease with the process running. The most important quality index for this process is the content of 4-CBA in the product. However, in real plant, the content of 4-CBA is analysed every two hours in a laboratory. It is a very large delay for control system so the operation conditions of the process could not be adjusted in time. These may results in a maximum two hours product failure. In this paper, a first principle model of the process is developed based on Aspen Plus. The accuracy of the model is verified by the model results and the actual plant results. Based on this model, a series of sensitive analysis are performed. Six variables include 4-CBA content in TA, react temperature, react pressure, hydrogen flow rate, catalyst activity and Slurry concentration are the main factors influencing the 4-CBA content in the product. Though the aspen model is accurate, these parameters in aspen model are not easy to adjust quickly. In order to predict 4-CBA content quickly, a soft sensor for 4-CBA is developed using recursive kernel partial least squares considering the nonlinearity and slow time-varying of the process. Results show that the prediction accuracy of this method is very high and it is easy for engineers to handle.

A lot of work has been done on the geospatial service composition to support advanced processing, spatial calculation, and invoking of heterogeneous data. However, the quality of service chain is rarely considered and the process model cannot be reused. A modeldriven way of geospatial web service composition is proposed in this work, the service composition is treated as an optimization problem by GwcsFlow model and dynamic binding mechanism. The case of facility location analysis is provided to demonstrate the improvements in geospatial service composition through optimization algorithms.

To investigate the ecological safety of Beauveria bassiana in soil, we evaluated the effects of different concentrations of B. bassiana spores suspensions and acephate on paddy soil microbial flora and enzyme activities in a potted trial. Results showed that B. bassiana can increase the quantity of bacteria and fungi on day 10 and 30, while it showed inhibition on actinomycetes growth on day 10. However, acephate reduced the quantity of bacteria, fungi, and actinomycetes in soil. Investigation of enzyme activities revealed that invertase activity declined during prophase, while urease activity decreased later in B. bassiana treatment groups, and there were no significant changes in alkaline phosphatase or dehydrogenase activity. Acephate showed higher inhibition rates of enzymes. B. bassiana treatment at lower concentrations showed a higher yield. Overall, compared with the acephate, B. bassiana is an effective, environmentally friendly microbial pesticide in this system.

‘Liegfabriek’: text linguistic linking patterns Within the framework of Text Linguistics it can be argued that linguistic patterns play a role in the structuring and generating of meaning. In the first instance this article investigates the ‘sociolinguistic fibre' in the short story "Liegfabriek'' by Etienne van Heerden. Attention is focused on the characteristics of advertising language and it is indicated how, from a sociolinguistic perspective, advertising language is used to generate different meanings in a literary text. Secondly the linguistic mechanisms employed in establishing structural and semantic unity as well as thematic continuity within the text are investigated. Finally it is argued that an investigation of the linguistic fibre of a literary text sheds light on the complex entity called a literary text.

Constitutional values, public administration and the right of access to environmental information During the previous constitutional dispensation in South Africa the management of information tended to be excessively secretive. This position was changed by section 32 of the Constitution of the Republic of South Africa, 1996. According to the 1996 Constitution South Africa is a sovereign, democratic state founded on certain values such as human dignity, freedom and equality. The public administration is governed by democratic values and principles such as transparency. In this article the constitutional values and principles that underlie an open and democratic society are discussed. Thereafter the right of access to information and the legislation that gives content to this right are analysed. It is concluded that the right of access to information can provide opportunities to the public sector, the private sector and the general public to form partnerships in sharing environmental information in order to fulfil their constitutional obligations.

The South African judiciary prefers non-critical interpretation of the law (especially legislation). In the Netherlands and Germany there is an ongoing debate on the role of the judiciary as lawmakers. In South Africa, however, the discussion of new ways of interpretation of legislation has up till now excluded this possibility. In this article a short overview of lawmaking in general is given. Following that, lawmaking in the interpretation of legislation is discussed with reference to the role of equity, the interpretation of general terms and phrases, the filling of gaps in legislation, the modification of strict law, the role of discretionary powers and the testing of legislation. The aim of the article is to add another point of view to the present debate on law reform, of which the interpretation of statutes is, amongst other aspects, a central theme. This is especially relevant considering the role of the Smith African judiciary subsequent to the introduction of a Bill of Rights.